R5F10DPJJFB#X6 - 32MHz 16-Bit Automotive RL78 MCU | Renesas
Référence : R5F10DPJJFB#X6 ✓ ActifR5F10DPJJFB#X6 Présentation
An automotive microcontroller is an embedded semiconductor that combines a CPU core, memory, timers, serial interfaces, and application-specific peripherals on one integrated circuit. The RL78 family is based on a compact 16-bit architecture suited to control-oriented products. Within the broader hierarchy of microcontroller ICs, embedded processors, and semiconductors, R5F10DPJJFB#X6 targets a dedicated vehicle-instrument role rather than a general-purpose control application.
The R5F10DPJJFB#X6 provides a 16-bit CPU core with a maximum clock frequency of 32 MHz. Its CMOS implementation supports automotive electronic-control applications where deterministic peripheral operation and integration are important. The device also includes a sound generator with adjustable tone frequencies from 100 Hz to 6 kHz, an automatic volume-decrement function, and support for up to four channels of 8-bit-precision stepper-motor control. These integrated functions reduce the number of discrete components needed in a cluster design.
The R5F10DPJJFB#X6 belongs to the RL78/D1A automotive-only family. Its architecture integrates the core, embedded Flash memory, communication and timing peripherals, display-related I/O, sound generation, and stepper-motor drivers into a single 100-pin device. The large pin count supports the broad mix of external connections normally required by a low-end automotive instrument cluster, including display drive signals, input lines, sound output, motor-control outputs, and communication functions.
Typical uses include automotive instrument-cluster controllers, combination-meter electronics, warning and indicator displays, audio annunciators, and small stepper-motor subsystems such as needle positioning. The integrated sound generator can provide simple audible prompts with tone frequencies set between 100 Hz and 6 kHz, while the motor-control section can operate as many as four stepper-motor channels with 8-bit positioning precision. These functions make the MCU appropriate where the controller must combine a human-machine interface with compact automotive actuation.
The primary design consideration is pin assignment and peripheral allocation. Because this is a 100-pin automotive MCU, the PCB footprint and routing network must follow the package-specific pin table rather than a generic 16-bit controller layout. Decoupling, input protection, display-drive signal integrity, motor-driver output requirements, and the automotive qualification obligations of the assembled product should be reviewed before layout release.
This product record consolidates the exact manufacturer and distributor listings, package information, application role, and available RL78/D1A peripheral facts into an engineering-oriented reference. It also identifies the limits of the technical record so designers can obtain the complete pin, electrical, qualification, and ordering details from the applicable Renesas documentation before committing an automotive design.
Alternatives de remplacement direct pour R5F10DPJJFB#X6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec R5F10DPJJFB#X6 (même facteur de forme et même empreinte) — différant par Product Type, Series.
R5F10DPJJFB#X6G
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
R5F10DPJJFB#X6 Valeurs maximales et caractéristiques électriques
| Product Type | 16-bit Microcontroller IC |
| Product Family | RL78/D1A |
| Series | RL78 |
| CPU Architecture | 16-bit |
| Fréquence d'horloge maximale | 32 MHz |
| Process Technology | CMOS |
| Program Memory Type | Flash |
| Package Type | 100-pin PQFP |
| Type de montage | Surface Mount |
| Application Category | Automotive low-end instrument clusters |
| Sound Generator Tone Range | 100 Hz to 6 kHz |
| Sound Generator Volume Function | Automatic volume decrement |
| Stepper Motor Channels | Up to 4 channels |
| Stepper Motor Position Resolution | 8-bit precision |
Guide de configuration des broches du R5F10DPJJFB#X6 100-pin pqfp
Configuration des broches du R5F10DPJJFB#X6 (boîtier 100-pin pqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour R5F10DPJJFB#X6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
R5F10DPJJFB#X6 convient pour 6 applications: Automotive Instrument Cluster Controller, Combination Meter Display Control, Audible Warning and Annunciator Control, Stepper Motor Gauge Positioning, Automotive Warning Indicator Control, Low-End Vehicle HMI Controller.
Automotive Instrument Cluster Controller
The R5F10DPJJFB#X6 fits a low-end automotive instrument cluster because it combines a 16-bit RL78/D1A core operating up to 32 MHz with cluster-oriented sound and motor-control functions. The 100-pin PQFP interface can support the mix of display drive, switch input, warning, communication, and actuator connections normally required by a combination meter. Its built-in sound generator spans 100 Hz to 6 kHz, while four 8-bit stepper-motor channels can serve positioning functions where the mechanical load and drive requirements are compatible. The MCU reduces discrete logic when a design needs local annunciation and limited needle or indicator positioning rather than a full high-end cluster controller.
Recommandé
Combination Meter Display Control
The R5F10DPJJFB#X6 is suitable for the display-control section of a low-end combination meter because its 16-bit 32 MHz core can coordinate multiple display-related signals while the 100-pin package provides ample external connections. The part is specifically positioned by Renesas for automotive low-end instrument clusters, allowing the controller to consolidate display updates, warning logic, input scanning, and local sound functions in one device. Four 8-bit stepper-motor channels provide additional integration for controlled indicators. PCB design must follow the exact 100-pin assignment, and display timing, electrode drive, and electrical protection should be checked against the manufacturer interface specifications.
Recommandé
Audible Warning and Annunciator Control
The R5F10DPJJFB#X6 can generate simple vehicle warning tones without a separate programmable sound source because its built-in generator supports 100 Hz to 6 kHz and includes automatic volume decrement. In an instrument cluster, the 32 MHz RL78/D1A core can select tones, manage warning priorities, update status indications, and coordinate the same timer resources used by other cluster functions. This integration is most useful for discrete audible prompts rather than high-fidelity audio playback. The external audio path, amplifier, speaker protection, volume-control implementation, and timing behavior must be designed around the manufacturer’s sound-generator and general-purpose I/O requirements.
Recommandé
Stepper Motor Gauge Positioning
The R5F10DPJJFB#X6 supports as many as four stepper-motor channels with 8-bit positioning precision, making it applicable to compact cluster mechanisms with limited travel or moderate resolution requirements. Its 32 MHz 16-bit core can coordinate motor commands with gauge sensing, switch input, display updates, and diagnostic logic. Consolidation can reduce the number of separate motion-control controllers in a low-end instrument assembly. Mechanical designers must still verify torque, current, stall behavior, drive topology, thermal loading, and whether the internal outputs meet the actuator requirements; the MCU specification alone does not guarantee suitability for every motor or load.
Recommandé
Automotive Warning Indicator Control
The R5F10DPJJFB#X6 can act as the central controller for warning lamps, telltale indicators, and related status logic in a low-end automotive cluster. Its 16-bit architecture and 32 MHz clock provide control bandwidth for coordinating indicator states with inputs, timers, display segments, sound prompts, and limited motor-driven pointers. The automotive-focused RL78/D1A positioning makes the device more application-aligned than a general-purpose MCU when the design follows the manufacturer’s reference configuration. Production engineers should verify exact I/O assignment, input thresholds, display-drive limits, watchdog behavior, and automotive qualification documentation before releasing the schematic.
Recommandé
Low-End Vehicle HMI Controller
The R5F10DPJJFB#X6 is applicable to a compact vehicle human-machine interface that combines status indication, simple prompts, and limited physical positioning. Renesas identifies the device for automotive low-end instrument clusters, where a dedicated controller can handle local display, switch, sound, and stepper-motor functions without relying on a larger central display controller. Its integrated 100 Hz to 6 kHz tone generator and four 8-bit motor channels provide application-specific capabilities beyond a basic GPIO MCU. System partitioning remains important: communications, diagnostics, safety mechanisms, and power management may require separate hardware depending on the vehicle architecture and regulatory requirements.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour R5F10DPJJFB#X6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | R5F10DPJJFB#X6G |
|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics |
| Package | 100-pin PQFP | 100-pin PQFP |
| Product Family | RL78/D1A | RL78/D1A |
| CPU Architecture | 16-bit | 16-bit |
| Maximum Clock Frequency | 32 MHz | 32 MHz |
| Program Memory Type | Flash | Flash |
| Sound Generator Tone Range | 100 Hz to 6 kHz | 100 Hz to 6 kHz |
| Stepper Motor Channels | Up to 4 channels | Up to 4 channels |
| Stepper Motor Position Resolution | 8-bit precision | 8-bit precision |
| Application Category | Automotive low-end instrument clusters | Automotive low-end instrument clusters |
Principaux différenciateurs
- Cluster-focused peripheral integration (vs R5F10DPJJFB#X6G)
- Dedicated low-end instrument-cluster positioning (vs R5F10DPJJFB#X6G)
- 32 MHz 16-bit control performance (vs R5F10DPJJFB#X6G)
Notes de conception
Use the exact 100-pin PQFP footprint and the manufacturer pin-description table when routing the board. Place required decoupling capacitors adjacent to the corresponding power pins, keep sensitive display and communication routes away from stepper-motor outputs, and provide the protection and return paths required by the external interface. Do not substitute a generic 100-pin footprint without checking body size, lead pitch, pin-1 orientation, and exposed thermal requirements.
Separate cluster signal domains according to their sensitivity. Route display and communication nets on the quiet side of the board, keep switching or motor-driver return currents away from MCU ground references, and minimize loop area around sensitive inputs. Add test points for supply rails, reset, programming interfaces, warning outputs, and motor-control signals so production diagnostics and fault analysis do not require intrusive board modifications.
Avoid assuming that every RL78/D1A ordering code is interchangeable. The R5F10DPJJFB#X6G variant is closely related, but the exact suffix differences must be checked against the Renesas ordering table for temperature grade, qualification, packing, and commercial conditions. Likewise, a shared 100-pin package or common family name does not by itself prove identical Flash capacity, peripheral mapping, and pin-level behavior.
Build the supply network around the electrical limits and sequencing requirements published for the exact ordering code. Confirm the permitted input range, internal regulator outputs, startup behavior, reset thresholds, and maximum load current before choosing capacitors or power-supply components. For a 3.3 V or 5 V automotive rail, include local bulk storage, high-frequency bypass, controlled rise time, and reverse-transient protection appropriate to the vehicle power environment.
Informations de conformité
The product is identified as an automotive-only RL78/D1A device, but the accessible material does not state exact RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 qualification details for the exact ordering code.