R5F10PGELFB#X5 - Low-Power RL78/F14 MCU | Renesas
Référence : R5F10PGELFB#X5 ✓ ActifR5F10PGELFB#X5 Présentation
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces on one IC. The RL78 architecture belongs to the broader embedded-controller hierarchy: 16-bit microcontroller → embedded processor → embedded-control system. By combining control logic and automotive network interfaces in one package, the RL78/F14 reduces component count and supports compact, energy-conscious designs.
The RL78/F14 portfolio is positioned for particularly low consumption current, making it appropriate for systems that spend substantial time in stop, standby, or periodic sensing operation. Integrated CAN and LIN modules support communication between automotive nodes, while timer RD and comparator resources help implement motor control, timing, and threshold-based signal conditioning without excessive external circuitry.
The device also supports BLDC motor control and includes functional-safety features intended to improve the robustness of safety-related automotive subsystems. These capabilities make the family relevant to body electronics, thermal management, actuator control, instrumentation, and compact electromechanical systems. Exact flash, RAM, clock, temperature, and electrical limits must be confirmed from the ordering-information section of the manufacturer documentation for the selected suffix.
Typical deployments include CAN-connected body modules, LIN-controlled comfort systems, brushless-DC motor controllers, industrial sensing nodes, and low-duty-cycle battery equipment. The combination of local peripheral integration and low-power operation can reduce software overhead and board area while keeping automotive communications in one controller.
Board design should follow the manufacturer package pinout, exposed-pad requirements, and decoupling recommendations. Confirm the operating-voltage range, pin multiplexing, peripheral availability, and clock configuration against the exact R5F10PGELFB#X5 ordering information before committing the PCB layout. Prototype firmware should also exercise reset, watchdog, low-power, and communication fault conditions.
This product page combines Renesas family-level technical information, package-focused design guidance, sourcing information, and practical application analysis. It helps engineers identify the correct RL78/F14 variant while separating confirmed family capabilities from suffix-specific details that require final datasheet verification.
Alternatives de remplacement direct pour R5F10PGELFB#X5 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
R5F10PGGLFB#X5
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
R5F10PGHLFB#X5
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
R5F10BGELFB#X5
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
R5F10PGELFB#X5 Valeurs maximales et caractéristiques électriques
| Product Type | 16-bit microcontroller |
| Product Series | RL78/F14 |
| CPU Core | RL78 16-bit core |
| Boîtier | 48-pin LFPQFP |
| Automotive Interface | Integrated CAN module |
| Automotive Interface | Integrated LIN module |
| Motor Control | BLDC motor-control support |
| Timer Peripheral | Timer RD |
| Analog Peripheral | Comparator |
| Functional Safety Features | Supported by RL78/F14 family |
| Low Consumption Current | RL78/F14 family low-power positioning |
| Type de montage | Surface mount |
Guide de configuration des broches du R5F10PGELFB#X5 48-pin lfpqfp
Configuration des broches du R5F10PGELFB#X5 (boîtier 48-pin lfpqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour R5F10PGELFB#X5.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
R5F10PGELFB#X5 convient pour 6 applications: Automotive CAN Body Control Module, LIN Actuator and Sensor Node, BLDC Motor Control Controller, Industrial Sensing and Condition Monitoring, Battery-Powered Equipment, Compact Embedded Control Platform.
Automotive CAN Body Control Module
The R5F10PGELFB#X5 fits compact body-control and comfort modules that must operate through a CAN network while handling local switches, timers, and diagnostic functions. Its RL78/F14 family integrates CAN, timer RD, comparator resources, and functional-safety features, reducing the need for separate communication or timing ICs. The 48-pin LFPQFP package also provides a practical pin count for distributed automotive electronics. Firmware should use the manufacturer’s CAN initialization sequence, validate bus error states, and exercise low-power transitions. Final automotive suitability depends on the exact temperature and qualification attributes assigned to this ordering code.
Recommandé
LIN Actuator and Sensor Node
The R5F10PGELFB#X5 is appropriate for LIN-connected actuators, door modules, seat controls, and distributed sensors because the RL78/F14 family includes an integrated LIN interface alongside local timers and comparators. This combination allows a compact node to interpret analog thresholds, manage timing, and communicate with a vehicle or industrial LIN master without excessive external hardware. Because LIN nodes remain connected while the vehicle is parked, low-consumption characteristics are especially useful. Firmware should include wake-up handling, bus timeout recovery, and safe output states for disconnected or shorted actuators.
Recommandé
BLDC Motor Control Controller
The R5F10PGELFB#X5 can serve as the control core in a compact BLDC motor controller because the RL78/F14 family supports BLDC motor control, timer RD, comparators, and low-consumption operation. Timer resources can support commutation and PWM sequencing, while comparator inputs can assist with rotor or phase sensing. The integrated CAN or LIN interface also provides a path for speed commands, diagnostics, and operating-state reporting. Validate the exact timer channels, comparator routing, analog limits, and PWM frequency in the Renesas user documentation before assigning pins.
Recommandé
Industrial Sensing and Condition Monitoring
The R5F10PGELFB#X5 is suitable for industrial sensors that combine threshold measurement, periodic data acquisition, and low-power standby behavior. Comparator resources can detect external sensor crossings, timer RD can organize periodic sampling, and the microcontroller can preprocess results before sending them through an available serial interface. A duty-cycled design can wake for a measurement, transmit the result, and return to a low-current state. Use the exact datasheet to confirm ADC availability, oscillator behavior, wake-up sources, and I/O voltage limits, since these details vary across RL78/F14 suffix configurations.
Recommandé
Battery-Powered Equipment
The low-consumption focus of the RL78/F14 family makes R5F10PGELFB#X5 a candidate for battery-powered instrumentation, portable maintenance equipment, and low-duty-cycle controls. The device can remain in a low-current state between user actions and wake on configured events, while its timers and comparators support responsive local behavior without continuous high-rate processing. CAN or LIN connectivity can carry status information when a network is present. To maximize the benefit, measure average current across sleep, wake, processing, and communication states rather than optimizing only the active-state figure.
Recommandé
Compact Embedded Control Platform
The R5F10PGELFB#X5 fits compact embedded-control platforms that need local decision-making plus automotive-style connectivity. Its 16-bit RL78 architecture, communication peripherals, timers, and comparators create a focused control hub for small motors, sensors, and electromechanical subsystems. The 48-pin LFPQFP package provides access to multiple I/O functions while keeping the board compact. Designers should define pin multiplexing early, preserve required debug functions, and route communications away from sensitive analog inputs. Use the manufacturer pin-description table to confirm every assigned signal and alternate function.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour R5F10PGELFB#X5 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | R5F10PGGLFB#X5 | R5F10PGHLFB#X5 | R5F10BGELFB#X5 |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 48-pin LFPQFP | 48-pin LFPQFP | 48-pin LFPQFP | 48-pin LFPQFP |
| Product Series | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 |
Principaux différenciateurs
- Combines automotive communication and motor-control support in one RL78/F14 controller (vs R5F10BGELFB#X5)
- Uses a compact 48-pin LFPQFP package for multifunction embedded control (vs R5F10PGGLFB#X5)
- Supports functional-safety-oriented automotive system design (vs R5F10PGHLFB#X5)
Notes de conception
Assign all 48 LFPQFP pins from the exact R5F10PGELFB#X5 pin-description table before routing the PCB. Pay particular attention to alternate-function selections for communications, timers, debug, reset, and oscillator signals. Follow the manufacturer land-pattern dimensions and exposed-pad requirements rather than deriving them from a generic 48-pin QFP drawing. A package-level cross-check after schematic completion can prevent silent conflicts between timer RD, comparator, CAN, and LIN assignments.
Plan the power tree for both active and low-power operating states. Place the required local bypass capacitors beside the appropriate supply and ground pins, keep the return path short, and use the exact capacitor values and ESR characteristics specified in the Renesas hardware guidelines. Estimate average current from duty-cycled operation rather than active current alone, because sleep duration and wake-up peripherals can dominate the energy budget in battery-powered designs.
Route CAN and LIN signals as controlled-impedance communication nets and keep them away from switching nodes, motor-drive edges, and high-current return paths. Provide a clean return reference beneath the communications route where board geometry permits. Comparator and timer inputs should be separated from switching waveforms, and unused inputs should be configured according to the manufacturer’s requirements rather than left floating.
Do not treat a shared package designation as proof that two RL78/F14 order codes are interchangeable. Compare flash, RAM, clock, operating voltage, temperature grade, peripheral availability, pin multiplexing, qualification, and delivery code. When substituting R5F10PGGLFB#X5, R5F10PGHLFB#X5, or R5F10BGELFB#X5, update the linker configuration and retest startup, communication, motor-control, and low-power behavior.
Informations de conformité
The exact R5F10PGELFB#X5 ordering information and compliance declarations must be checked in the manufacturer documentation. The RL78/F14 family includes automotive-oriented features, but family-level automotive functionality does not by itself establish the qualification status of this exact suffix.