S3F8S7BXZZ-TW8B - 8-bit MCU, 64KB Flash, 80-TQFP | Zilog
Référence : S3F8S7BXZZ-TW8B ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.65 | $2 325,00 |
| 1 000 | $4.1 | $4 100,00 |
S3F8S7BXZZ-TW8B Présentation
Key features of the S3F8S7B family include a Z8-compatible CPU that delivers a fast and efficient register-oriented architecture, 64 KB of Flash memory for program storage, RAM for data operations, and a sophisticated interrupt controller that supports fast context switching. The integrated peripherals typically include multiple timers/counters, a UART, an A/D converter, GPIO, and PWM channels, allowing the device to consolidate many discrete analog and digital functions onto a single chip and reduce overall BOM cost.
Typical applications for this MCU include home appliance control (washing machines, microwave ovens, induction cookers), industrial motor control, HVAC control panels, security alarm panels, remote controllers, and consumer electronics that require a small, low-cost 8-bit controller with ample Flash for feature-rich firmware. The 80-pin TQFP package provides sufficient I/O for multi-segment LCD driving or keypad scanning without external I/O expanders.
The SAM88RC architecture is a well-known 8-bit core in the legacy embedded market, and Zilog continues to support this family with stable toolchains and a stable long-term supply. The combination of 64 KB Flash and the Z8-compatible ISA makes this MCU a familiar migration target for engineers replacing obsolete 80C51 or other legacy 8-bit designs.
Alternatives de remplacement direct pour S3F8S7BXZZ-TW8B — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
S3F8S7BXZZ-QW8B
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
S3F8S7BXZZ-TW8A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
S3F8S7BXZZ-TW8B Valeurs maximales et caractéristiques électriques
| Core Architecture | SAM88RC (Z8-compatible) 8-bit |
| Program Memory | 64 KB Flash |
| Boîtier | 80-pin TQFP (TQFP-80) |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (168 hours) [assumed for TQFP-80, verify with manufacturer] |
| Family | S3F8S Series |
| Series Prefix | S3F8 |
Guide de configuration des broches du S3F8S7BXZZ-TW8B 80-pin tqfp (tqfp-80)
Configuration des broches du S3F8S7BXZZ-TW8B (boîtier 80-pin tqfp (tqfp-80)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour S3F8S7BXZZ-TW8B.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
S3F8S7BXZZ-TW8B convient pour 6 applications: Home Appliance Control, HVAC Control Panels, Security Alarm Panels, Industrial Sensor Interface, Consumer Remote Controllers, Small Motor Drive (Brushed DC / Stepper).
Home Appliance Control
The S3F8S7BXZZ-TW8B's SAM88RC Z8-compatible 8-bit core, 64 KB Flash, and rich peripheral set make it a strong fit for home appliances such as washing machines, microwave ovens, induction cookers, and refrigerators. The 80-pin TQFP provides enough GPIO for keypad scanning, multi-segment display driving, and triac/relay control without external expanders. The interrupt controller and timers handle real-time events like button debounce, motor commutation timing, and sensor sampling, while the Flash density supports complete state-machine firmware plus diagnostic routines in a single chip.
Recommandé
HVAC Control Panels
HVAC indoor units, thermostats, and air-handler controllers rely on a deterministic 8-bit core with timers for compressor control, ADC for temperature sensors, and PWM for fan speed regulation. The S3F8S7BXZZ-TW8B delivers 64 KB Flash for zoning logic, schedule tables, and EEPROM emulation. Its wide operating voltage and the 80-pin TQFP footprint give designers room for LCD interface, IR receiver, and communication peripherals while keeping the BOM minimal.
Recommandé
Security Alarm Panels
Wired alarm panels need multiple zones, keypad scanning, siren drivers, and communication to a monitoring center. The S3F8S7BXZZ-TW8B's GPIO count and 64 KB Flash allow up to 16-32 zone inputs plus event logging without external I/O expanders. The SAM88RC interrupt controller ensures fast response to sensor triggers while the on-chip timers drive periodic supervision and watchdog functions.
Recommandé
Industrial Sensor Interface
Industrial controllers that aggregate analog sensors, drive displays, and communicate via UART benefit from the S3F8S7BXZZ-TW8B's integrated ADC channels, UART, and GPIO. The 64 KB Flash accommodates Modbus RTU or proprietary protocol stacks, while the 80-pin TQFP allows direct connection to 4-20 mA sensor front-ends and segment displays. The Z8-compatible ISA is widely supported by legacy industrial firmware bases.
Recommandé
Consumer Remote Controllers
Universal remotes, toy controllers, and consumer IR/RF handsets need a low-cost 8-bit MCU with timers for IR carrier generation and enough Flash for protocol libraries. The S3F8S7BXZZ-TW8B's 64 KB Flash fits NEC, RC5, RC6, and SIRC code tables simultaneously. The 80-pin TQFP supports keypad matrix scanning up to 8x8 plus LCD status indicators.
Recommandé
Small Motor Drive (Brushed DC / Stepper)
Brushed DC and unipolar stepper motor controllers benefit from the S3F8S7BXZZ-TW8B's PWM channels, timers, and ADC for back-EMF sensing. The 64 KB Flash handles acceleration/deceleration profiles and stall detection routines, while the 80-pin TQFP exposes enough GPIO for H-bridge direction control and current-sense amplifier inputs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour S3F8S7BXZZ-TW8B — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | S3F8S7BXZZ-QW8B | S3F8S7BXZZ-TW8A | PIC18F46K22-I/PT | PIC18F47K42-E/PT |
|---|---|---|---|---|---|
| Brand | Zilog | Zilog | Zilog | Microchip Technology | Microchip Technology |
| Package | 80-TQFP | 80-TQFP - same | 80-TQFP - same | 44-TQFP - DIFFERENT | 44-TQFP - DIFFERENT |
| Core Architecture | SAM88RC (Z8-compatible) 8-bit | SAM88RC 8-bit (same) | SAM88RC 8-bit (same) | PIC18 8-bit | PIC18 8-bit |
| Program Flash | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB |
| Pin Count | 80 | 80 | 80 | 44 | 44 |
| Footprint Compatibility | N/A (reference) | Drop-in (same 80-TQFP) | Drop-in (same 80-TQFP) | PCB rework required (44-TQFP) | PCB rework required (44-TQFP) |
| Toolchain | Zilog Z8 toolchain | Zilog Z8 (same) | Zilog Z8 (same) | Microchip MPLAB X (different) | Microchip MPLAB X (different) |
Principaux différenciateurs
- Z8-compatible ISA with long legacy code base (vs PIC18F46K22-I/PT)
- High pin count (80) without external expanders (vs PIC18F46K22-I/PT (44 pins))
- Dedicated S3F8S7B family ecosystem (vs Cross-brand 8-bit MCUs)
Notes de conception
Estimated: The S3F8S7BXZZ-TW8B's 80-pin TQFP footprint is shared with other S3F8S7B suffix variants (TW8A, QW8B) but NOT with smaller 8-bit MCUs like PIC18F46K22-I/PT (44-TQFP). Confirming pinout against the Zilog datasheet is mandatory before any substitution - the 80-pin TQFP pad pattern is unique and not interchangeable with 44/64-pin layouts.
Use a 0.1 uF ceramic decoupling capacitor as close as possible to each VDD pin, plus a bulk 10 uF tantalum or ceramic capacitor on the main supply rail. The SAM88RC core is sensitive to supply noise during Flash programming and ADC sampling, so keep analog and digital supply traces separated and star-grounded at the MCU.
Route the external crystal/oscillator traces symmetrically and within 5 mm of the MCU's XTAL pins. Keep them away from switching nodes (PWM outputs, relay drivers) and guard them with a ground pour to reduce EMI injection into the SAM88RC's clock circuit. Add a 1 M ohm parallel resistor across the crystal if startup margin is poor.
Informations de conformité
Compliance data not provided in the verified web data; verify against the Zilog product page or manufacturer datasheet before use in regulated markets.
