Texas Instruments

SN74HC368N - 6-Channel Inverting Tri-State Buffer | Texas Instruments

Référence : SN74HC368N ✓ Actif
2 V to 6 V Vdss 16-pin PDIP Package
MOQ : 1 |

SN74HC368N Présentation

Texas Instruments SN74HC368N is a 6-channel inverting buffer and line driver with three-state outputs, operating from 2 V to 6 V in a 16-pin PDIP package. It combines two four-line sections and one two-line section, with active-low output-enable inputs that allow connected bus outputs to be placed in the high-impedance state.

A tri-state buffer is a digital logic device that can actively drive a logic 0 or logic 1 while also presenting a high-impedance state when disabled. The SN74HC368 belongs to the HC CMOS logic family and is designed for memory-address drivers, clock drivers, and bus-oriented receivers and transmitters. Its inverting channels support clock distribution and control-signal routing where signal polarity reversal is intentional or can be accommodated by downstream circuitry.

The device provides six usable output channels, a 2 V to 6 V supply range, and independent control of the grouped four-line and two-line output sections. Its three-state outputs allow multiple drivers to share a bus when only one driver is enabled at a time. The SN74HC368N ordering code specifies a temperature range of -40 °C to 85 °C and a PDIP package with 16 pins.

Unlike a standard push-pull buffer that continuously sources or sinks output current, the SN74HC368 can disconnect each enabled output group from the bus. Active-low output-enable inputs provide straightforward bus arbitration and prevent contention when several buffers share address, clock, or control lines. The dual four-line and two-line organization lets a designer disable related channels together while retaining independent control over the smaller group.

Typical uses include three-state memory-address buffering, clock distribution, bus-oriented signal conditioning, and control interfaces in industrial control, instrumentation, embedded, and communications equipment. The inverting action is particularly useful when clock polarity must be reversed between source and destination. When several devices drive one bus, their enable inputs must be controlled so that no two output groups are active simultaneously.

For reliable implementation, use the manufacturer pin-description table when assigning PCB nets and observe the absolute maximum ratings and recommended operating conditions. Decoupling capacitors should be placed close to the supply pins, while enable traces should be kept short and away from high-current switching nodes. Inputs must remain within the specified logic levels and must not be left floating.

This page consolidates the device architecture, package details, sourcing guidance, replacement considerations, comparison parameters, and practical implementation notes needed to evaluate the SN74HC368N for a new or existing PCB design.

Alternatives de remplacement direct pour SN74HC368N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

74HC368N,652

✅ Remplacement direct
📦 PDIP-16
Same six-channel inverting tri-state-buffer function and 16-pin PDIP format; timing, supply current, and output-current limits require comparison from the current NXP datasheet.

📋 Alternative de référence (hors catalogue)

SN74HC368N Valeurs maximales et caractéristiques électriques

Number of Channels 6 channels
Logic Type Inverting
Configuration de sortie 3-state output
Supply Voltage Range 2 V to 6 V
Organisation de la mémoire Dual 4-line and 2-line buffer/driver sections
Output Enable Active-low
Output State Inverted data or high-impedance when disabled
Boîtier 16-pin PDIP
Plage de température de fonctionnement -40 °C to 85 °C
Type de montage Through-hole
Primary Application Memory address, clock, and bus drivers
Operating Free-Air Temperature -40 °C to 85 °C

Guide de configuration des broches du SN74HC368N 16-pin pdip

Configuration des broches du SN74HC368N (boîtier 16-pin pdip). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 16-pin pdip pour le SN74HC368N

Aucune donnée de brochage détaillée disponible pour SN74HC368N.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

SN74HC368N convient pour 6 applications: Memory Address Buffering, Clock Distribution, Bus-Oriented Signal Conditioning, Industrial Control Interfaces, Test and Measurement Systems, Embedded Control Logic.

🖥️

Memory Address Buffering

The SN74HC368N is well suited to three-state memory-address buffering because it provides six inverting channels in two four-line groups and one two-line group. Each group can be disabled independently with its active-low output enable, allowing selected address lines to drive a shared bus while remaining groups enter a high-impedance state. The 2 V to 6 V operating range supports multiple HC-series logic systems. Designers should ensure that only one driver group is enabled at a time, control the enables with valid CMOS levels, and use the manufacturer's pin table to route the four-line and two-line sections correctly.

⚡

Clock Distribution

The SN74HC368N can distribute clock signals through six inverting channels while offering grouped three-state control for shared clock buses. Its two four-line sections and one two-line section permit the system to enable only the destinations that require the clock, while disabled outputs remain electrically disconnected. This is useful when several clock domains must share conductors without continuous output contention. Confirm that inversion is acceptable at the destination and that enable transitions do not create clock-edge hazards.

🌐

Bus-Oriented Signal Conditioning

The SN74HC368N can condition inverting control, address, or communication-related signals that must connect to a tri-state bus. When the active-low output enable is asserted, the selected channel group drives inverted data; when deasserted, the same outputs provide high impedance and release the bus. This architecture supports bus arbitration, test isolation, and modular routing. Use pull devices only where required by the wider system, and verify timing margins because the inverting function changes clock and data polarity.

🏭

Industrial Control Interfaces

The SN74HC368N can support grouped control-signal routing in industrial equipment where multiple buffered outputs must connect to a common backplane or interface bus. Its active-low enables help isolate subsystems during startup, diagnostics, or maintenance, while the high-impedance output state prevents unused channels from loading the bus. The 2 V to 6 V supply range aligns with HC CMOS logic levels, but system designers must verify noise margins, propagation timing, temperature behavior, and output drive at the actual supply voltage and loading.

🔧

Test and Measurement Systems

The SN74HC368N is applicable in test and measurement equipment when instrument resources must drive shared lines selectively. Six inverting, three-state channels can route clock, trigger, or control signals while disabled groups remain isolated from the common node. Grouped enables simplify control of four-line and two-line sections without requiring a separate buffer for every signal. Before using the device in a precision instrument, verify propagation delay, output rise and fall behavior, capacitive-load limitations, and whether inverted timing polarity requires compensation elsewhere in the signal path.

🧩

Embedded Control Logic

The SN74HC368N can serve as an interface stage between embedded control logic and grouped external bus signals. Its inverting channels can generate inverted clock or control waveforms, and its active-low output enables let firmware or hardware control bus participation. Because the device operates from 2 V to 6 V, it fits HC-series systems where the selected voltage still satisfies the required noise margin and timing. Firmware must maintain exclusive bus ownership, and hardware should include defined enable states so startup or reset does not leave multiple drivers active.

Récapitulatif des produits recommandés

SN74HC368N Texas Instruments Utilisé dans : Memory Address Buffering, Clock Distribution, Bus-Oriented Signal Conditioning, Industrial Control Interfaces, Test and Measurement Systems, Embedded Control Logic 74HC368N,652 PDIP cross-brand functional candidate Utilisé dans : Memory Address Buffering, Bus-Oriented Signal Conditioning, Embedded Control Logic
What is the SN74HC368N and what does it do?
The SN74HC368N is a six-channel inverting tri-state buffer and line driver from Texas Instruments. According to the manufacturer datasheet, it contains two four-line sections and one two-line section operating from 2 V to 6 V. Each section can drive its outputs or place them in a high-impedance state through an active-low output-enable input, making the device suitable for address, clock, and bus-driver applications.
What is the supply voltage range of the SN74HC368N?
The SN74HC368N operates from 2 V to 6 V. Texas Instruments identifies the SN74HC368 as a 2 V to 6 V six-channel inverter with three-state outputs. This supply range allows the same HC-series device to be used in low-voltage and standard 5 V systems, although logic thresholds, timing, and output-current capability must be checked against the operating voltage used in the design.
Where can I download the SN74HC368N datasheet PDF?
The official SN74HC368N datasheet can be downloaded from the Texas Instruments product page at https://www.ti.com/lit/gpn/SN74HC368. The manufacturer datasheet contains the pin-description table, functional diagram, electrical characteristics, recommended operating conditions, and ordering information. Use the manufacturer copy for design work because third-party mirrors may present older revisions or omit the exact N-package suffix details.
Where can I find the SN74HC368N pinout?
The SN74HC368N pinout is found in the pin-description table of the Texas Instruments SN74HC368 datasheet. The device is a 16-pin PDIP and is organized as two four-line sections plus one two-line section. Because the verified listing excerpts do not expose every pin number and name, the complete numbered assignment should be taken directly from the manufacturer datasheet before PCB routing or replacement testing.
What does the three-state output mean for the SN74HC368N?
The three-state output means each SN74HC368N channel can drive a logic 0, drive a logic 1, or present a high-impedance state. Texas Instruments describes the device as a hex inverting buffer and line driver with active-low output enables. The high-impedance state allows multiple drivers to share a bus, provided the design ensures that only one output group is enabled at a time.
Can the SN74HC368N be used as a clock driver?
Yes, the SN74HC368N is explicitly designed for clock-driver applications as well as memory-address and bus drivers. Its six inverting channels can distribute a clock when inverted polarity is acceptable, while the three-state outputs permit clock lines to be disconnected during bus sharing. The enable inputs should be sequenced so that connected driver sections do not contend during transitions.
When should I choose the SN74HC368N instead of a non-inverting buffer?
Choose the SN74HC368N when the system intentionally requires inverted clock or control signals and also benefits from grouped three-state output control. The device provides six inverting channels arranged as two four-line groups and one two-line group. If polarity reversal is unacceptable or individual channel isolation is required without inversion, a non-inverting tri-state buffer will usually simplify the surrounding logic.
What is the best drop-in replacement for the SN74HC368N?
The closest documented cross-brand replacement is the NXP 74HC368N,652, which is listed as a 16-pin PDIP, tube-packaged 74HC368 device. It is a drop-in candidate because it combines the same 74HC368 function, six inverting channels, tri-state outputs, and PDIP form factor. Confirm enable-pin polarity, logic levels, timing, and electrical limits against the latest NXP datasheet before production substitution.
Is the NXP 74HC368N,652 the same as the Texas Instruments SN74HC368N?
The NXP 74HC368N,652 is functionally similar to the Texas Instruments SN74HC368N and is the closest documented PDIP replacement candidate. Both implement the 74HC368 family of six inverting tri-state buffers with grouped output-enable control. They are not necessarily electrically or procurement-identical, so compare propagation delay, supply current, output drive, temperature limits, and lifecycle status before approving a substitution.
SN74HC368N vs 74HC368N,652 — which is better for an existing DIP PCB?
The SN74HC368N and NXP 74HC368N,652 are both suitable candidates for a 16-pin PDIP board because both use the 74HC368 six-channel inverting tri-state-buffer architecture. The Texas Instruments part is preferable when its timing and electrical characteristics already match the design exactly; the NXP part may be useful for supply-chain flexibility. Final selection requires a parameter-by-parameter comparison from current manufacturer datasheets.
Is the SN74HC368N suitable for bus-oriented receivers and transmitters?
The SN74HC368N is suitable for bus-oriented receivers and transmitters because it provides three-state outputs and active-low enable control. Texas Instruments specifically identifies memory-address drivers, clock drivers, and bus-oriented interfaces as target applications. It functions best as a bus driver rather than a general-purpose transceiver, and the system must prevent simultaneous enabling of multiple devices that share the same conductors.
How should output-enable pins be controlled on the SN74HC368N?
The SN74HC368N output-enable inputs should be driven from valid CMOS logic and sequenced so that only one connected output group drives a shared bus at a time. The enables are active-low, meaning a low level permits operation while a high level forces the corresponding outputs into the high-impedance state. Do not leave enable inputs floating, because undefined control states can cause bus contention.
What power and thermal considerations apply to the SN74HC368N?
The SN74HC368N is a CMOS logic device, so its power dissipation depends primarily on supply voltage, switching frequency, load current, and the number of active outputs. Exact quiescent and dynamic-current curves are not present in the verified excerpts, so use the manufacturer electrical-characteristics tables for design limits. Keep supply routing short, place the decoupling capacitor close to the device, and provide adequate copper for the through-hole package.
Is the SN74HC368N RoHS and REACH compliant?
The RoHS and REACH status of the SN74HC368N is not stated in the verified product excerpts. Do not assume compliance solely because the device uses a standard HC CMOS logic family. Request the current manufacturer material-compliance declaration or product-page status for the exact ordered part before making a procurement or environmental-compliance statement.
Where can I buy SN74HC368N and what is the current lead time?
Use the Request a Quote form on this page to request SN74HC368N pricing, current stock, minimum order quantity, and production lead time. Texas Instruments lists the SN74HC368N in a 16-pin PDIP configuration rated from -40 °C to 85 °C. Current commercial availability and lead time can change, so obtain a written quotation tied to the exact N-package MPN and required quantity.

Données de référence d'ingénierie pour SN74HC368N — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the SN74HC368N when a design needs six inverting channels, grouped active-low output enables, and three-state bus participation in a 16-pin PDIP footprint. Its two four-line sections and one two-line section are useful for address, clock, and shared control buses where unused drivers must be electrically disconnected. The NXP 74HC368N,652 is the closest documented cross-brand candidate for an existing DIP board, but current NXP timing, electrical limits, temperature range, and lifecycle status must be compared before approval. A non-inverting buffer may be preferable if reversed clock or data polarity would require extra inversion elsewhere. Likewise, a device with independently controlled outputs may be easier to use when grouped enable sequencing does not match the system architecture.

Comparaison avec les alternatives

Paramètre Ce produit 74HC368N,652
Package 16-pin PDIP 16-pin PDIP
Brand Texas Instruments NXP
Number of Channels 6 channels 6 channels
Logic Type Inverting Inverting
Output Configuration 3-state output 3-state output
Output Enable Active-low Active-low
Channel Organization Dual 4-line and 2-line sections Dual 4-line and 2-line sections
Primary Application Address, clock, and bus drivers Address, clock, and bus drivers

Principaux différenciateurs

  • Provides six individually routed but grouped tri-state outputs (vs 74HC368N,652)
  • Supports the standard HC-series supply range (vs 74HC368N,652)
  • Combines inversion with selectable bus participation (vs 74HC368N,652)

Notes de conception

Ensure that no two connected SN74HC368N output groups drive the same bus simultaneously. The active-low output-enable inputs must have defined states during reset, startup, and shutdown, and they should never be left floating. Use the manufacturer's functional diagram to determine which pins control the four-line and two-line groups.

Place the supply-decoupling capacitor close to the device's supply and ground connections, and keep enable and data traces short enough to avoid additional propagation delay or coupling. For through-hole construction, provide adequate copper area and clean ground returns. If outputs drive longer PCB traces or cables, verify rise time, overshoot, and capacitive-load limits in the manufacturer electrical-characteristics tables.

Account for the inverting action at every destination because a clock, reset, or control edge polarity may reverse between the buffer input and output. Also evaluate the timing difference between propagation through data and enable paths. Disable outputs before changing bus ownership, and use a defined non-conflicting state in arbitration logic to prevent short current pulses.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The verified product excerpts do not state the exact-part RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The SN74HC368N is a commercial HC CMOS logic device rather than an automotive-qualified variant.

Données vérifiées le : 2026-11-18 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

SN74HC368N datasheet SN74HC368N datasheet pdf SN74HC368N pinout SN74HC368N equivalent SN74HC368N replacement SN74HC368N cross reference SN74HC368N price SN74HC368N stock Texas Instruments SN74HC368N SN74HC368N vs 74HC368N,652 SN74HC368N 6 channel buffer SN74HC368N PDIP pinout SN74HC368N address driver SN74HC368N clock driver SN74HC368N tri-state output

Composants & termes associés

Texas Instruments SN74HC368N SN74HC368 74HC368N,652 NXP Hex inverting buffer Line driver Tri-state output High-impedance state Active-low output enable CMOS logic HC series Memory address driver Clock driver Bus-oriented receiver and transmitter PDIP-16 Through-hole package Logic IC Digital buffer Output-enable control Signal conditioning Bus arbitration Industrial control Embedded control Test and measurement
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ