SN74HC640N - 8-Bit 3-State Bus Transceiver | TI
Référence : SN74HC640N ✓ ActifSN74HC640N Présentation
A bus transceiver is an interface device that connects two digital buses while controlling signal direction and output state. The SN74HC640 belongs to the CMOS logic hierarchy, where a transceiver sits between bus-controller outputs and external data lines. Its bidirectional architecture allows eight data paths to transmit in either direction, while the 3-state outputs permit a shared bus to be disconnected when another device needs control.
The SN74HC640N provides eight independently described data channels in one package. DIR establishes the operating direction for all channels, and OE independently controls whether the outputs are active or high impedance. This arrangement simplifies control logic in systems that route data among multiple bus masters, memory devices, interface controllers, or data-conversion subsystems without introducing a separate direction-control line for every bit.
The device uses positive-edge-triggered data transfer when the direction and output-enable states permit operation. Because the transceiver inverts the bus signal, the receiving circuit receives the complement of the transmitted logic level. Designers must account for this inversion in software, protocol handling, test fixtures, and any logic-level conversion or inversion placed downstream of the SN74HC640N.
Typical applications include bidirectional data acquisition, embedded processor bus expansion, memory-interface routing, test-equipment signal conditioning, and industrial control systems that need controlled access to a shared parallel bus. The 20-pin PDIP package also supports through-hole assembly and prototype boards where a socketed device is useful for replacement or logic testing.
For reliable operation, connect the enable and direction controls to valid CMOS logic levels, route all eight bus paths consistently, and ensure that only one enabled device drives the shared bus at a time. The TI datasheet pin configuration and truth table should be used directly when assigning PCB signals and validating read-versus-write behavior.
This page combines package and ordering information, functional guidance, pin-level implementation details, and a practical comparison framework for compatible octal 74HC-style transceivers, helping engineers move from datasheet lookup to a board-ready design decision.
Alternatives de remplacement direct pour SN74HC640N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
SN74HC640NE4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
74HC640N
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CD74HC640EE4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
SN74HC640N Valeurs maximales et caractéristiques électriques
| Product Type | Octal bus transceiver |
| Number of Elements | 1 element |
| Bits per Element | 8 bits |
| Logic Type | Inverting |
| Output State | 3-state |
| Number of Channels | 8 channels |
| Supply Voltage Range | 2 V to 6 V |
| Plage de température de fonctionnement | -40°C to +85°C |
| Boîtier | 20-pin PDIP |
| Nombre de broches | 20 pins |
| Type de montage | Through-hole |
| Direction Control | DIR input |
| Output Enable Control | OE input |
| Transfer Direction Control | Shared by all 8 channels |
Configuration des broches de SN74HC640N
| Broche 1 | 1A — Data input or output for channel 1 |
| Broche 2 | 1B — Data input or output for channel 1 |
| Broche 3 | 2A — Data input or output for channel 2 |
| Broche 4 | 2B — Data input or output for channel 2 |
| Broche 5 | 3A — Data input or output for channel 3 |
| Broche 6 | 3B — Data input or output for channel 3 |
| Broche 7 | 4A — Data input or output for channel 4 |
| Broche 8 | 4B — Data input or output for channel 4 |
| Broche 9 | DIR — Direction control input |
| Broche 10 | OE — Output enable input |
| Broche 11 | GND — Ground |
| Broche 12 | 5A — Data input or output for channel 5 |
| Broche 13 | 5B — Data input or output for channel 5 |
| Broche 14 | 6A — Data input or output for channel 6 |
| Broche 15 | 6B — Data input or output for channel 6 |
| Broche 16 | 7A — Data input or output for channel 7 |
| Broche 17 | 7B — Data input or output for channel 7 |
| Broche 18 | 8A — Data input or output for channel 8 |
| Broche 19 | 8B — Data input or output for channel 8 |
| Broche 20 | VCC — Power supply |
Applications typiques
SN74HC640N convient pour 6 applications: Shared Parallel Data Bus, Embedded Processor Bus Expansion, Data Acquisition Interface, Test and Measurement Signal Routing, Industrial Control Signal Conditioning, Memory Interface Routing.
Shared Parallel Data Bus
The SN74HC640N fits a shared parallel bus because its eight inverting channels can change direction under the common DIR input while OE isolates the outputs when another device owns the bus. The 2 V to 6 V supply range supports conventional 74HC CMOS systems, and the 20-pin PDIP package simplifies through-hole prototyping. Designers should keep every data channel under consistent bus-direction control and permit only one enabled output driver on each shared node. Because the transceiver inverts logic levels, external inversion or corresponding software treatment may be necessary. Pull-up or pull-down requirements and unused control states should be checked against the manufacturer datasheet before routing the PCB.
Recommandé
Embedded Processor Bus Expansion
The SN74HC640N can buffer or isolate eight parallel processor-interface signals when a board requires bidirectional routing between a controller and peripheral bus. Common DIR and OE control reduces the external control-pin burden, while the eight 3-state channels support shared-bus participation. Its 2 V to 6 V operating range aligns with standard 74HC interface levels, but the system designer must confirm the processor voltage, timing, and required logic polarity. The inverting architecture means that firmware and hardware timing diagrams should use the effective inverted transfer behavior. The 20-pin PDIP format is particularly convenient for prototype and legacy-system expansion where socketed through-hole assembly is preferred.
Recommandé
Data Acquisition Interface
The SN74HC640N can provide controlled eight-bit data isolation in acquisition equipment where a converter or sensor interface must connect to a shared digital bus. Its 3-state outputs permit the acquisition channel to release the bus during other transfers, and the shared DIR input simplifies switching between control and data paths. The 8-bit channel count maps naturally to parallel converter output groups, although the complete signal sequence must be adjusted for the device's inverting operation. Operating across the -40°C to +85°C range supports industrial and laboratory environments when the rest of the circuit meets its own environmental limits. Timing margins and logic thresholds should be checked against the selected acquisition components.
Recommandé
Test and Measurement Signal Routing
The SN74HC640N is useful in test fixtures and instrument signal-routing circuits that need to connect eight measurement lines to a common controller bus without leaving multiple outputs continuously active. DIR selects the route through all channels, while OE places the device in a high-impedance state during test sequences or instrument hand-off. The 20-pin PDIP package is convenient for socketed boards, probe fixtures, and legacy test systems. Because the device inverts every enabled data path, test-limit calculations and expected waveforms must reflect that polarity. Use the manufacturer truth table to establish control timing, and verify signal integrity at the system clock and bus-loading conditions used by the final fixture.
Recommandé
Industrial Control Signal Conditioning
The SN74HC640N can condition and route eight digital control or status lines in industrial equipment operating across its -40°C to +85°C range. Its shared DIR and OE controls allow a controller to take ownership of a bus or release it for another subsystem, reducing the number of dedicated multiplexing controls on the host board. The 2 V to 6 V supply compatibility supports 74HC logic families, but external systems must ensure compatible thresholds and timing. The inverting transfer characteristic should be included in ladder-logic interpretation or control-code design. Designers should also keep disabled outputs high impedance and use the device within the absolute maximum ratings specified for the selected supplier and package variant.
Recommandé
Memory Interface Routing
The SN74HC640N can route eight parallel memory-interface signals when a controller must share address, data, or control paths with another bus owner. Its 3-state output capability is valuable in multiplexed memory systems because OE can prevent the transceiver from driving a line while another device is active. DIR provides a common direction change for all eight paths, simplifying state-machine control at the board level. The inverting behavior must be included in memory-command and address decoding logic, and setup or hold timing must be checked against the actual memory and transceiver specifications. The PDIP package is especially useful in legacy controller cards and prototype platforms where a socketed through-hole implementation accelerates rework.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour SN74HC640N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | SN74HC640NE4 | 74HC640N | CD74HC640EE4 |
|---|---|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments | NXP Semiconductors | Texas Instruments |
| Package | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP | 20-pin PDIP |
| Logic Type | Inverting | Inverting | Inverting | Inverting |
| Number of Channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Output State | 3-state | 3-state | 3-state | 3-state |
| Supply Voltage Range | 2 V to 6 V | 2 V to 6 V | 2 V to 6 V | 2 V to 6 V |
| Direction Control | Shared DIR input | Shared DIR input | Shared DIR input | Shared DIR input |
| Output Enable Control | Shared OE input | Shared OE input | Shared OE input | Shared OE input |
Principaux différenciateurs
- Shared control simplifies eight-channel bus direction management (vs 74HC640N)
- Identifiable 20-pin PDIP implementation for through-hole assembly (vs SN74HC640NE4)
- Three-state bus isolation supports shared parallel buses (vs CD74HC640EE4)
Notes de conception
Do not allow two enabled SN74HC640N devices to drive the same parallel-bus node. Use OE to isolate inactive devices and assert it only after DIR and the receiving device are prepared. Because all eight channels invert the signal, verify command interpretation and test patterns after a logic inversion. A bus that appears to have sporadic data corruption can result from output contention rather than a failed transceiver.
Route each numbered A and B data channel as a matched bidirectional path and keep the DIR and OE traces away from sensitive analog or high-speed clock nets. Place any required bus termination close to the driven endpoint and use a ground plane that remains continuous beneath the PDIP footprint. Do not add trace stubs merely to reproduce a generic bus layout; calculate termination from the final trace impedance, load, and clock rate.
Decouple the VCC pin close to the package with the capacitance and voltage rating required by the Texas Instruments manufacturer datasheet. Keep the supply return path short and connect the GND pin to the board ground plane without sharing a narrow path with unrelated high-current loads. When the transceiver is used in 74HC systems operating away from 5 V, recheck input thresholds, output levels, and timing rather than assuming 5 V CMOS behavior.
Informations de conformité
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering option. AEC-Q100 status is not applicable to this commercial 74HC logic device based on the identified product class.