SN74LS293D - 4-Bit Binary Counter | Texas Instruments
Référence : SN74LS293D ✓ ActifSN74LS293D Présentation
A binary counter is a synchronous sequential-logic device that stores a multi-bit count and advances it when a clock edge occurs. The SN74LS293 belongs to the 74LS TTL family, with SN74LS90 and SN74LS93 providing related decade-counter functions in the same broader counter category. Its four-bit architecture allows designers to obtain 16 distinct count states, while separate output stages provide multiple count outputs for downstream decoding or control.
The principal feature of the SN74LS293D is its straightforward binary counting function in a standard 14-pin surface-mount package. Its positive-edge-triggered operation means the count changes when the clock input transitions from a low to a high level. The 0°C to 70°C operating range suits commercial equipment, industrial control systems, laboratory instruments, and educational electronics where a conventional TTL counter is appropriate.
Because the SN74LS293D is an LS-series logic device, its behavior depends on valid supply voltage, input levels, and output loading. Clock, enable, clear, and data inputs should be driven with signals that meet the family’s input and output thresholds. Any unused counter input must be held at a defined logic level rather than left floating, because an open TTL input can oscillate and create unpredictable states during PCB operation.
Typical applications include modulo-16 timing chains, digital clock dividers, programmable event counters, address-generation logic in older control systems, and general-purpose sequential control. For designs requiring a decade count instead of a binary count, the SN74LS93 family offers a different counting sequence and should be selected according to the required state progression rather than package compatibility alone.
Designers should preserve the standard 74LS293 pinout and provide adequate routing for clock and control signals, especially when fan-out changes. Decoupling near the supply pins is essential for switching noise control. Because TTL counters combine functional logic with potentially high transition activity at the clock input, clean power distribution and short signal paths help prevent false count transitions in long or noisy systems.
This page combines the verified device identity, package information, operating limits, function description, drop-in alternatives, and practical implementation guidance. It also distinguishes genuine same-footprint replacements from counters with related functions but different sequencing, helping engineers choose a part that preserves the PCB while meeting the required count behavior.
Alternatives de remplacement direct pour SN74LS293D — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
SN74LS293DG4
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
74LS293D
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC74LS293D
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DM74LS293D
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
74LS293D
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
SN74LS293D Valeurs maximales et caractéristiques électriques
| Counter Type | 4-bit binary counter |
| Number of Counting Elements | 1 element |
| Count Length | 4 bits |
| Number of Count States | 16 states |
| Triggering Edge | Positive edge |
| Logic Family | 74LS TTL |
| Typical Supply Voltage | 5 V |
| Plage de température de fonctionnement | 0°C to 70°C |
| Boîtier | 14-pin SOIC |
| Package Designation | D |
| Nombre de broches | 14 pins |
| Type de montage | Surface mount |
| Manufacturer Document Identifier | SDLS097 |
| Document Revision Date | March 1988 |
Guide de configuration des broches du SN74LS293D d
Configuration des broches du SN74LS293D (boîtier d). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour SN74LS293D.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
SN74LS293D convient pour 6 applications: Binary Clock Divider, Event and Pulse Counter, Digital State Sequencer, Laboratory Timing Generator, Industrial Control Retiming, Address and Mode Generation.
Binary Clock Divider
The SN74LS293D fits clock-divider designs because its four binary outputs provide count states corresponding to division by 2, 4, 8, and 16. Connect an incoming clock to the positive-edge clock input and take the required tap from the corresponding output. In a 5 V 74LS system, the binary progression provides predictable timing relationships without an additional decoder. The main design consideration is ensuring the downstream load remains within the output-current and fan-out limits specified for the logic family.
Recommandé
Event and Pulse Counter
The SN74LS293D can count qualified events for sequence control, production-test indexing, and pulse-batch management. Because it advances only on the positive clock edge, an event signal can be conditioned before entering the clock pin to prevent multiple counts from one physical event. Its 16-state binary range is sufficient for modulo-16 indexing, while the output taps allow different stages of the event count to trigger other logic blocks.
Recommandé
Digital State Sequencer
The SN74LS293D is useful in a state sequencer because it stores one of 16 binary states and advances on each accepted clock edge. External combinational logic can decode those states and initiate the next operation in a controller. This arrangement suits established TTL-based automation and laboratory controllers where a programmable state machine would add unnecessary complexity. Designers should register asynchronous control conditions so they cannot create unintended clock transitions.
Recommandé
Laboratory Timing Generator
The SN74LS293D can divide a laboratory reference clock into slower timing intervals for instrument sequencing and repetitive measurements. The positive-edge-triggered architecture allows the divided output to become the next stage’s clock, creating a multistage timing chain. The commercial 0°C to 70°C rating suits room-temperature laboratory equipment, while the standard 5 V supply simplifies integration with existing 74LS test fixtures. Validate timing margins across temperature before using it in safety- or measurement-critical control paths.
Recommandé
Industrial Control Retiming
The SN74LS293D is appropriate for legacy industrial-control logic that requires deterministic binary counting within a 0°C-to-70°C enclosure. It can partition a master control sequence into 16 timing or indexing steps, reducing the number of discrete counter stages required. The SOIC package supports compact board layouts, but designers should maintain short clock routing and clean supply decoupling. Confirm that every connected output presents a compatible 74LS load before committing to a counter cascade.
Recommandé
Address and Mode Generation
The SN74LS293D can generate successive binary values for simple address stepping, mode selection, or repeated-test indexing in older control systems. Each positive clock edge changes the four-bit output according to binary order, making the count states easy to associate with sequential operations. Where the circuit must reset predictably after the sixteenth state, use the device’s clear control and verify its timing against the surrounding logic. This approach is most appropriate when the system already uses 5 V 74LS signaling.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour SN74LS293D — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | SN74LS293DG4 | 74LS293D | MC74LS293D | DM74LS293D | 74LS293D |
|---|---|---|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | NXP Semiconductors | onsemi | Fairchild Semiconductor | Nexperia |
| Counter Type | 4-bit binary counter | 4-bit binary counter | 4-bit binary counter | 4-bit binary counter | 4-bit binary counter | 4-bit binary counter |
| Logic Family | 74LS TTL | 74LS TTL | 74LS TTL | 74LS TTL | 74LS TTL | 74LS TTL |
| Pin Count | 14 pins | 14 pins | 14 pins | 14 pins | 14 pins | 14 pins |
Principaux différenciateurs
- Direct same-brand green-part option (vs SN74LS293DG4)
- NXP second-source option in the same footprint (vs 74LS293D)
- onsemi production alternative (vs MC74LS293D)
- Binary rather than decade count sequence (vs SN74LS93D)
Notes de conception
Operate the SN74LS293D from a regulated 5 V supply within the limits in Texas Instruments datasheet SDLS097. Place the standard power-supply decoupling capacitor as close as practical to the supply and ground pins, with a short return path. Because simultaneous output transitions can create dynamic supply current, keep the clock and counter outputs from overloading the rail or adding excessive switching activity to long conductors.
Route the clock trace directly to the clock input and keep it short relative to other switching signals. Provide a quiet ground reference and avoid routing the clock parallel to long output or power routes where coupling could create an unintended positive edge. In cascaded counters, connect each stage’s timing output to the next clock input with a short, well-defined path and avoid adding unnecessary stubs.
Do not leave unused TTL inputs floating; connect them to a defined valid logic level. Confirm that clear, enable, and count inputs remain within the 74LS input thresholds during reset and power-up. If replacing the SN74LS293D, verify that the substitute has the same 14-pin pinout, positive-edge behavior, 4-bit binary sequence, supply voltage, and temperature rating rather than relying only on the counter function.
Informations de conformité
The manufacturer material confirms a commercial 0°C-to-70°C operating range but does not provide the requested environmental-compliance declarations. AEC-Q100 is not applicable to this commercial logic IC.