STM32F031C6T7 - 48MHz Cortex-M0 MCU | STMicroelectronics
Référence : STM32F031C6T7 ✓ ActifSTM32F031C6T7 Présentation
A microcontroller is a programmable semiconductor containing a processor core, memory, and integrated peripherals. The STM32F0 MCU family belongs to the ARM Cortex-M architecture, a compact embedded-processing platform designed for real-time control. STM32F031C6T7 occupies the low-power entry level of the STM32F0 family while combining a 48 MHz clock with a useful set of analog and digital peripherals, reducing the need for separate interface components.
Principal features include 32 KB (32K x 8) Flash, an ARM Cortex-M0 32-bit RISC core, 48 MHz maximum operating frequency, 12-bit ADC capability, nine timers, and communication interfaces. The 48-TQFP package exposes enough I/O for motor-control signaling, sensor acquisition, communications, and general-purpose embedded products. Its specified -40°C to +105°C temperature range supports industrial equipment, consumer controls, instrumentation, and connected sensor modules.
The Cortex-M0 architecture uses a simple instruction set optimized for low-complexity real-time workloads. The STM32F031x4/x6 family combines that core with embedded control functions such as timers, ADC channels, and serial interfaces. A 48 MHz operating limit supports responsive sampling, timing, communication, and supervisory-loop execution, while the 32 KB Flash footprint is suitable for compact control firmware, boot logic, and moderate protocol stacks.
Typical uses include motor and power-control modules, low-cost sensor hubs, industrial data-acquisition equipment, compact consumer appliances, LED-control boards, and connected embedded accessories. The 48-pin package is particularly useful when a design needs more I/O than a 32-pin MCU but does not require the larger pin count of a 64-pin device. An ADC-based measurement front end and multiple timers allow many analog signals to be handled within one controller.
PCB design should preserve the analog and digital power structure recommended by STMicroelectronics, including proper decoupling near supply pins and controlled return paths for sensitive analog measurements. Confirm the complete pin assignment, exposed-pin requirements, and peripheral multiplexing against the manufacturer datasheet before layout. Firmware migration should also verify startup, clock, interrupt, and peripheral behavior rather than assuming that a related STM32F0 device is functionally interchangeable.
This product overview combines the manufacturer specifications, package information, pricing evidence, drop-in alternatives, and practical design guidance needed to evaluate the STM32F031C6T7 for a new embedded platform.
Alternatives de remplacement direct pour STM32F031C6T7 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32F031C6T7 (même facteur de forme et même empreinte) — différant par Package.
STM32F031C6T6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32F031C8T6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32F031C4T6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32F031C8T7
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32F031C4T7
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32F031C6T7 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Architecture | 32-bit RISC |
| Core | ARM Cortex-M0 |
| Operating Voltage | 2.5 V to 3.3 V |
| Température de fonctionnement | -40°C to +105°C |
| ADC Resolution | 12 bit |
| Timer Count | 9 timers |
| Boîtier | 48-TQFP, 7 x 7 mm |
| Nombre de broches | 48 pins |
| Type de montage | Surface mount |
Guide de configuration des broches du STM32F031C6T7 48-tqfp, 7 x 7 mm
Configuration des broches du STM32F031C6T7 (boîtier 48-tqfp, 7 x 7 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32F031C6T7.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32F031C6T7 convient pour 6 applications: Industrial Sensor Acquisition, Motor and Power Control, LED Lighting Control, Data Acquisition and Instrumentation, Compact Consumer Appliance Control, Connected Sensor Node.
Industrial Sensor Acquisition
The STM32F031C6T7 fits compact industrial sensor modules that must convert analog measurements and apply real-time control logic within a 2.5 V to 3.3 V power budget. Its 12-bit ADC handles analog channels, while the 48 MHz Cortex-M0 core supports sampling, filtering, calibration, and digital communication without requiring a higher-complexity processor. The -40°C to +105°C T7 grade is appropriate for equipment operating beyond an 85°C ambient limit. Designers should pay particular attention to analog grounding, input filtering, ADC acquisition timing, and decoupling because those details determine measurement repeatability in a small industrial enclosure.
Recommandé
Motor and Power Control
The STM32F031C6T7 is appropriate for small motor-control, valve-drive, and power-sequencing boards that require deterministic timing without a high-performance control processor. Its nine timers provide resources for input capture, output compare, periodic interrupts, and PWM generation, while the 48 MHz Cortex-M0 core can execute current-control or supervisory loops. The 48-pin TQFP package offers more I/O than a 32-pin controller, allowing sensor inputs, gate-drive signals, fault inputs, and communications to coexist. PCB design should keep switching-current paths separate from ADC references, provide local supply decoupling, and validate timing margins under the highest expected load transient.
Recommandé
LED Lighting Control
The STM32F031C6T7 can serve as the central controller in an LED lighting module that requires dimming, status indication, thermal monitoring, and interface logic. The timer resources support PWM-based dimming, and the 48 MHz core leaves processing capacity for current-loop supervision or communication updates. Its 32 KB Flash is sufficient for compact lighting firmware when the application does not require a large graphical interface or extensive connectivity stack. For reliable operation, place the MCU away from high-current LED drive paths, use a separate analog and digital supply structure, and include open-load, over-temperature, and watchdog recovery behavior in the firmware design.
Recommandé
Data Acquisition and Instrumentation
The STM32F031C6T7 is well suited to compact instrumentation front ends that sample several analog signals and transmit measurements through a serial interface. The 12-bit ADC provides a practical resolution for process monitoring, while the 48 MHz Cortex-M0 core performs averaging, calibration, threshold checks, and status reporting. Forty-eight pins provide a practical balance between signal access and board size. Engineers should evaluate ADC input impedance, sampling-cycle requirements, reference stability, and digital isolation according to the manufacturer electrical-characteristics tables. Calibration data and sensor compensation can also be stored in Flash without adding a separate nonvolatile-memory component in modest designs.
Recommandé
Compact Consumer Appliance Control
The STM32F031C6T7 provides enough logic, timing, and analog conversion capability for compact consumer appliances that coordinate buttons, displays, sensors, motors, and communication interfaces. The Cortex-M0 core handles the main product state machine, while the 48 MHz clock allows responsive control of user inputs and timed sequences. A 32 KB Flash budget can accommodate a compact embedded application without imposing the memory cost of a larger MCU. Firmware should include brownout and watchdog recovery, debounced input handling, safe actuator shutdown, and communication timeouts. The 7 x 7 mm package also helps reduce board area when production volume justifies surface-mount assembly.
Recommandé
Connected Sensor Node
The STM32F031C6T7 fits low-bandwidth sensor nodes that collect local measurements, apply filtering, and forward information through a serial or simple bus interface. Its low-complexity Cortex-M0 core and 32 KB Flash support efficient firmware, and the T7 temperature rating allows deployment in thermally demanding locations. The MCU can coordinate ADC readings, interval sampling, alarms, and communication retries while keeping the external component count low. Designers should budget Flash for future protocol revisions, avoid blocking delays in acquisition routines, and verify communications against the required baud rate and bus timing. Brownout detection and a watchdog are especially useful for nodes that must recover unattended after power or connection interruptions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32F031C6T7 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F031C6T6 | STM32F031C8T6 | STM32F031C4T6 | STM32F031C8T7 | STM32F031C4T7 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) |
| CPU Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 64 KB | 16 KB | 64 KB | 16 KB |
| Maximum Operating Temperature | 105°C | 85°C | 85°C | 85°C | 105°C | 105°C |
| Minimum Operating Temperature | -40°C | -40°C | -40°C | -40°C | -40°C | -40°C |
| ADC Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Timer Count | 9 timers | 9 timers | 9 timers | 9 timers | 9 timers | 9 timers |
| Operating Voltage | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V |
Principaux différenciateurs
- Larger Flash allocation than the C4 alternatives (vs STM32F031C4T6)
- Higher temperature grade than the T6 alternative (vs STM32F031C6T6)
- Lower Flash demand than the C8 alternative (vs STM32F031C8T7)
- Balanced memory and temperature capability within the C6 family (vs STM32F031C4T7)
Notes de conception
Place all required decoupling capacitors close to their corresponding VDDA, VDD, and VSS pins, with the shortest practical ground return paths. Keep analog sensor routing away from PWM, relay, motor-switching, and high-current LED-drive nodes. The 48-pin TQFP footprint also requires unobstructed access to the exposed pad or thermal land specified by the manufacturer, together with adequate copper for heat spreading.
Treat ADC inputs as analog signals even though they terminate at a digital MCU. Use short traces, isolate them from switching-current paths, and calculate the required acquisition time from the sensor output impedance and the MCU's sampling characteristics. Add filtering only where its bandwidth does not compromise the measurement, and validate offset, gain, noise, and temperature behavior on the assembled PCB rather than relying on simulation alone.
Do not select a replacement solely by package and Flash capacity. Before substituting an STM32F031 variant, compare pin multiplexing, power pins, clock pins, boot behavior, interrupt assignments, ADC channels, timer resources, and temperature grade. Revalidate startup code and firmware, especially when moving between 16 KB, 32 KB, and 64 KB Flash devices because linker placement and bootloader assumptions may change.
Design the 2.5 V to 3.3 V supply with adequate margin for startup current, analog load, peripheral activity, and temperature. Confirm the regulator's transient behavior against the MCU's supply requirements and use local bulk capacitance where load steps occur. Brownout behavior, watchdog recovery, and controlled reset-state GPIOs should be included in the firmware because they determine whether the product can restart safely after an input-voltage disturbance.
Informations de conformité
The manufacturer product page identifies the STM32F031C6 family and its operating specifications, but no explicit compliance declarations are stated here.