STMicroelectronics

STM32F031C6T7 - 48MHz Cortex-M0 MCU | STMicroelectronics

MPN: STM32F031C6T7 ✓ Aktif
2.5 V to 3.3 V Vdss 48-TQFP, 7 x 7 mm Package 48 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

STM32F031C6T7 Ringkasan

The STMicroelectronics STM32F031C6T7 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 32 KB of Flash memory and a 48-pin TQFP package measuring 7 x 7 mm. It supports 2.5 V and 3.3 V operation and is specified for temperatures from -40°C to +105°C. The device is designed for compact embedded-control products requiring an efficient RISC core, mixed-signal measurement, timers, and communication peripherals in a 48-pin surface-mount package.

A microcontroller is a programmable semiconductor containing a processor core, memory, and integrated peripherals. The STM32F0 MCU family belongs to the ARM Cortex-M architecture, a compact embedded-processing platform designed for real-time control. STM32F031C6T7 occupies the low-power entry level of the STM32F0 family while combining a 48 MHz clock with a useful set of analog and digital peripherals, reducing the need for separate interface components.

Principal features include 32 KB (32K x 8) Flash, an ARM Cortex-M0 32-bit RISC core, 48 MHz maximum operating frequency, 12-bit ADC capability, nine timers, and communication interfaces. The 48-TQFP package exposes enough I/O for motor-control signaling, sensor acquisition, communications, and general-purpose embedded products. Its specified -40°C to +105°C temperature range supports industrial equipment, consumer controls, instrumentation, and connected sensor modules.

The Cortex-M0 architecture uses a simple instruction set optimized for low-complexity real-time workloads. The STM32F031x4/x6 family combines that core with embedded control functions such as timers, ADC channels, and serial interfaces. A 48 MHz operating limit supports responsive sampling, timing, communication, and supervisory-loop execution, while the 32 KB Flash footprint is suitable for compact control firmware, boot logic, and moderate protocol stacks.

Typical uses include motor and power-control modules, low-cost sensor hubs, industrial data-acquisition equipment, compact consumer appliances, LED-control boards, and connected embedded accessories. The 48-pin package is particularly useful when a design needs more I/O than a 32-pin MCU but does not require the larger pin count of a 64-pin device. An ADC-based measurement front end and multiple timers allow many analog signals to be handled within one controller.

PCB design should preserve the analog and digital power structure recommended by STMicroelectronics, including proper decoupling near supply pins and controlled return paths for sensitive analog measurements. Confirm the complete pin assignment, exposed-pin requirements, and peripheral multiplexing against the manufacturer datasheet before layout. Firmware migration should also verify startup, clock, interrupt, and peripheral behavior rather than assuming that a related STM32F0 device is functionally interchangeable.

This product overview combines the manufacturer specifications, package information, pricing evidence, drop-in alternatives, and practical design guidance needed to evaluate the STM32F031C6T7 for a new embedded platform.

Pilihan pengganti yang segera untuk STM32F031C6T7 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera STM32F031C6T7 (sama faktor bentuk dan kaki) — berbeza dalam Package.

STMicroelectronics
Package: 48-LQFP (7 x 7 mm)
Bandingkan Dengan STM32F031C6T7 →

STM32F031C6T6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
STMicroelectronics
📦 48-TQFP (7x7)
32-bit ARM Cortex-M0 microcontroller · 48 MHz · 32 KB (32K x 8) · ARM Cortex-M0 32-bit RISC · STM32F031x4/x6 · 48-LQFP (7 x 7 mm) · Surface Mount

Hubungi untuk harga

Lihat Datasheet →

STM32F031C8T6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-TQFP (7x7)
Same STM32F031 family and 48 MHz core; Flash increases from 32 KB to 64 KB, while the maximum temperature rating decreases from 105°C to 85°C

📋 Alternatif rujukan (tidak dalam katalog)

STM32F031C4T6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
STMicroelectronics
📦 48-TQFP (7x7)
32-bit ARM Cortex-M0 microcontroller · ARM Cortex-M0 · 48 MHz · 16 KB · 16K x 8 bits · 4 KB · 2.0 V to 3.6 V · Integrated 12-bit ADC

Hubungi untuk harga

Lihat Datasheet →

STM32F031C8T7

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-TQFP (7x7)
Same 48 MHz Cortex-M0 core, package, and -40°C to +105°C temperature grade; Flash increases from 32 KB to 64 KB, a 100% increase

📋 Alternatif rujukan (tidak dalam katalog)

STM32F031C4T7

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-TQFP (7x7)
Same 48 MHz Cortex-M0 core, package, and -40°C to +105°C temperature grade; Flash decreases from 32 KB to 16 KB, a 50% reduction

📋 Alternatif rujukan (tidak dalam katalog)

STM32F031C6T7 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ARM Cortex-M0 microcontroller
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB (32K x 8)
Architecture 32-bit RISC
Core ARM Cortex-M0
Operating Voltage 2.5 V to 3.3 V
Suhu Operasi -40°C to +105°C
ADC Resolution 12 bit
Timer Count 9 timers
Kemasan 48-TQFP, 7 x 7 mm
Kiraan Pin 48 pins
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin STM32F031C6T7 48-tqfp, 7 x 7 mm

Konfigurasi pin untuk STM32F031C6T7 (48-tqfp, 7 x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 48-tqfp, 7 x 7 mm untuk STM32F031C6T7

Tiada data garisan pin yang diperoleh untuk STM32F031C6T7.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

STM32F031C6T7 patut untuk 6 aplikasis: Industrial Sensor Acquisition, Motor and Power Control, LED Lighting Control, Data Acquisition and Instrumentation, Compact Consumer Appliance Control, Connected Sensor Node.

🏭

Industrial Sensor Acquisition

The STM32F031C6T7 fits compact industrial sensor modules that must convert analog measurements and apply real-time control logic within a 2.5 V to 3.3 V power budget. Its 12-bit ADC handles analog channels, while the 48 MHz Cortex-M0 core supports sampling, filtering, calibration, and digital communication without requiring a higher-complexity processor. The -40°C to +105°C T7 grade is appropriate for equipment operating beyond an 85°C ambient limit. Designers should pay particular attention to analog grounding, input filtering, ADC acquisition timing, and decoupling because those details determine measurement repeatability in a small industrial enclosure.

⚡

Motor and Power Control

The STM32F031C6T7 is appropriate for small motor-control, valve-drive, and power-sequencing boards that require deterministic timing without a high-performance control processor. Its nine timers provide resources for input capture, output compare, periodic interrupts, and PWM generation, while the 48 MHz Cortex-M0 core can execute current-control or supervisory loops. The 48-pin TQFP package offers more I/O than a 32-pin controller, allowing sensor inputs, gate-drive signals, fault inputs, and communications to coexist. PCB design should keep switching-current paths separate from ADC references, provide local supply decoupling, and validate timing margins under the highest expected load transient.

💡

LED Lighting Control

The STM32F031C6T7 can serve as the central controller in an LED lighting module that requires dimming, status indication, thermal monitoring, and interface logic. The timer resources support PWM-based dimming, and the 48 MHz core leaves processing capacity for current-loop supervision or communication updates. Its 32 KB Flash is sufficient for compact lighting firmware when the application does not require a large graphical interface or extensive connectivity stack. For reliable operation, place the MCU away from high-current LED drive paths, use a separate analog and digital supply structure, and include open-load, over-temperature, and watchdog recovery behavior in the firmware design.

🔧

Data Acquisition and Instrumentation

The STM32F031C6T7 is well suited to compact instrumentation front ends that sample several analog signals and transmit measurements through a serial interface. The 12-bit ADC provides a practical resolution for process monitoring, while the 48 MHz Cortex-M0 core performs averaging, calibration, threshold checks, and status reporting. Forty-eight pins provide a practical balance between signal access and board size. Engineers should evaluate ADC input impedance, sampling-cycle requirements, reference stability, and digital isolation according to the manufacturer electrical-characteristics tables. Calibration data and sensor compensation can also be stored in Flash without adding a separate nonvolatile-memory component in modest designs.

📱

Compact Consumer Appliance Control

The STM32F031C6T7 provides enough logic, timing, and analog conversion capability for compact consumer appliances that coordinate buttons, displays, sensors, motors, and communication interfaces. The Cortex-M0 core handles the main product state machine, while the 48 MHz clock allows responsive control of user inputs and timed sequences. A 32 KB Flash budget can accommodate a compact embedded application without imposing the memory cost of a larger MCU. Firmware should include brownout and watchdog recovery, debounced input handling, safe actuator shutdown, and communication timeouts. The 7 x 7 mm package also helps reduce board area when production volume justifies surface-mount assembly.

🧩

Connected Sensor Node

The STM32F031C6T7 fits low-bandwidth sensor nodes that collect local measurements, apply filtering, and forward information through a serial or simple bus interface. Its low-complexity Cortex-M0 core and 32 KB Flash support efficient firmware, and the T7 temperature rating allows deployment in thermally demanding locations. The MCU can coordinate ADC readings, interval sampling, alarms, and communication retries while keeping the external component count low. Designers should budget Flash for future protocol revisions, avoid blocking delays in acquisition routines, and verify communications against the required baud rate and bus timing. Brownout detection and a watchdog are especially useful for nodes that must recover unattended after power or connection interruptions.

What are the key specifications of STM32F031C6T7 that engineers should know?
The STM32F031C6T7 combines a 48 MHz ARM Cortex-M0 core, 32 KB of Flash, a 12-bit ADC, nine timers, and a 48-pin 7 x 7 mm TQFP package. According to the STMicroelectronics STM32F031x4/x6 product page, the device supports operation at up to 48 MHz and is intended for compact real-time embedded-control designs. Its operating supply range is 2.5 V to 3.3 V, while the STM32F031C6T7 temperature designation extends from -40°C to +105°C.
What is the STM32F031C6T7 and what is an ARM Cortex-M0 microcontroller?
The STM32F031C6T7 is a 32-bit RISC microcontroller built around the ARM Cortex-M0 processor core. According to the STMicroelectronics STM32F031x4/x6 product page, the family combines a core operating at up to 48 MHz with embedded analog, timer, and communication functions. A Cortex-M0 device is designed for efficient control processing rather than graphics or high-compute workloads, making it appropriate for sensor nodes, power controllers, motor-control modules, and compact industrial equipment.
Where can I download the STM32F031C6T7 datasheet PDF?
The official STM32F031C6T7 documentation starts with the STMicroelectronics STM32F031x4/x6 product page at https://www.st.com/en/microcontrollers-microprocessors/stm32f031c6.html. From that page, engineers can access the family datasheet, pin definitions, electrical characteristics, peripheral descriptions, and package information. Use the manufacturer document for the complete 48-pin assignment because related STM32F0 devices can have different peripheral multiplexing even when their core and memory ratings are similar.
Where can I find the STM32F031C6T7 pinout?
The STM32F031C6T7 pinout is defined in the pin-description and package drawings contained in the manufacturer documentation for the STM32F031x4/x6 family. The device uses a 48-pin TQFP package measuring 7 x 7 mm. During schematic capture, assign every power, ground, reset, boot, clock, and GPIO signal directly from the STM32F031C6T7 datasheet. This avoids confusing alternate functions that are shared with other STM32F0 members.
What is the STM32F031C6T7 operating voltage and temperature range?
The STM32F031C6T7 operates from 2.5 V to 3.3 V and is specified over -40°C to +105°C. The voltage and temperature limits are consistent with the STM32F031C6 listing and its 12-bit ADC capability. Designers should use the manufacturer electrical-characteristics table to select decoupling, regulator tolerance, pull resistors, and external-interface levels. The -40°C to +105°C range supports industrial, automotive-adjacent, instrumentation, and consumer-control environments.
Where can I buy STM32F031C6T7 online and check stock?
Use the Request a Quote form on this page to request STM32F031C6T7 availability, current pricing, and lead time. The form lets buyers specify quantity, packaging preference, and delivery requirements without relying on a static price that may change. The target is an active STM32F0 microcontroller in a 48-TQFP package, and the manufacturer product page can be used to confirm device status and documentation before placing an order.
What is the price of STM32F031C6T7?
Current STM32F031C6T7 pricing should be obtained through the Request a Quote form on this page because commercial prices vary with quantity and market conditions. The form provides a direct response for the exact STM32F031C6T7 order code rather than a generic family price. Confirm the package suffix, tray or reel requirement, lead time, and shipment quantity when requesting the quotation so the supply response matches the assembled bill of materials.
What is the lead time for STM32F031C6T7?
Request the current STM32F031C6T7 lead time through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled delivery date, and the requested shipping configuration. Include the annual and prototype quantities, target date, and whether the PCB requires tray or tape-and-reel handling. This gives the supplier the complete context needed to provide a meaningful schedule for the exact 48-TQFP device.
Is STM32F031C6T7 in stock?
Use the Request a Quote form on this page to check current STM32F031C6T7 stock and allocate supply for your requirement. The STM32F031C6T7 is listed as active, but component availability can change more quickly than lifecycle status. State the required quantity, delivery date, and packaging arrangement when requesting confirmation. For production planning, also request safety stock and a factory schedule for recurring demand.
STM32F031C6T7 vs STM32F031C8T7 - which is better for a new design?
Choose the STM32F031C6T7 when 32 KB of Flash is sufficient, and choose the STM32F031C8T7 when the additional 32 KB of Flash materially improves firmware flexibility. Both devices are based on the STM32F031 family and use the 48-pin TQFP arrangement. The STM32F031C8T7 provides 64 KB of Flash, a 100% increase over the STM32F031C6T7, but should be selected only when the larger memory creates meaningful implementation value.
What is the difference between STM32F031C6T7 and STM32F031C6T6?
The principal selection difference is the temperature grade: the STM32F031C6T7 is specified from -40°C to +105°C, while the STM32F031C6T6 is associated with the lower -40°C to +85°C grade. Both are STM32F031C6 configurations in the 48-pin TQFP package with the same Cortex-M0 architecture, 48 MHz maximum frequency, and 32 KB Flash. Use the T7 grade when the enclosure temperature can exceed 85°C.
When should I choose STM32F031C6T7 over STM32F031C4T6?
Choose STM32F031C6T7 when firmware, bootloader, or application-code storage requires more than the 16 KB available in the STM32F031C4T6. The STM32F031C6T7 doubles Flash capacity to 32 KB while retaining the same STM32F031 family and 48-TQFP footprint. This is useful when communication stacks, diagnostics, or multiple control routines begin to exceed the smaller device's code space. The choice should be based on compiled firmware size with margin for future updates.
What can replace STM32F031C6T7 on an existing PCB?
The closest drop-in candidates are the 48-pin STM32F031C6T6, STM32F031C4T6, STM32F031C8T6, and STM32F031C8T7 variants because they retain the package family and principal interface arrangement. Replacement still requires checking temperature grade, Flash capacity, exposed-pin use, clock setup, and peripheral multiplexing in the manufacturer documentation. Firmware and qualification reviews are necessary because package similarity alone does not guarantee identical behavior.
Is STM32F031C6T7 suitable for industrial sensor acquisition and control?
The STM32F031C6T7 is suitable for compact sensor-acquisition and control systems that operate within a 2.5 V to 3.3 V supply range. Its 12-bit ADC, nine timers, 48 MHz Cortex-M0 core, and -40°C to +105°C rated T7 grade support real-time sampling and deterministic control. For industrial deployment, validate analog accuracy, noise performance, watchdog behavior, and peripheral timing against the final sensor source impedance and operating temperature.
Is there a Microchip equivalent for STM32F031C6T7?
A Microchip device should not be treated as a drop-in equivalent without a detailed pin, clock, memory, and peripheral review. The available cross-reference results identify generic comparison tools, but they do not establish that a Microchip MCU has the same 48-pin assignments, 2.5 V to 3.3 V operating characteristics, ADC architecture, timer resources, or Cortex-M0 software compatibility as the STM32F031C6T7. Use the STM32F031C6T7 manufacturer documentation as the controlling specification during any second-source evaluation.

Data referensi kejuruteraan untuk STM32F031C6T7 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the STM32F031C6T7 when a compact 48-pin design needs the middle STM32F031C6 configuration: 32 KB of Flash, operation to 48 MHz, a 12-bit ADC, and an extended 105°C temperature rating. Select STM32F031C6T6 when the enclosure remains below 85°C and the lower temperature grade is sufficient. Choose STM32F031C8T6 or STM32F031C8T7 when firmware size, bootloader requirements, or future updates justify 64 KB of Flash; the T6 version is adequate below 85°C, while T7 maintains the extended rating. Choose STM32F031C4T6 or STM32F031C4T7 only when 16 KB of Flash is sufficient and the lower memory cost outweighs the update margin. For every replacement, verify the package drawing, pin multiplexing, clock configuration, exposed-pad requirements, peripheral resources, and firmware assumptions before production release.

Perbandingan dengan Gantian

Parametr Produk Ini STM32F031C6T6 STM32F031C8T6 STM32F031C4T6 STM32F031C8T7 STM32F031C4T7
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7)
CPU Core ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0 ARM Cortex-M0
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 32 KB 32 KB 64 KB 16 KB 64 KB 16 KB
Maximum Operating Temperature 105°C 85°C 85°C 85°C 105°C 105°C
Minimum Operating Temperature -40°C -40°C -40°C -40°C -40°C -40°C
ADC Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit
Timer Count 9 timers 9 timers 9 timers 9 timers 9 timers 9 timers
Operating Voltage 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V

Penyeberangsung Jelas

  • Larger Flash allocation than the C4 alternatives (vsSTM32F031C4T6)
  • Higher temperature grade than the T6 alternative (vsSTM32F031C6T6)
  • Lower Flash demand than the C8 alternative (vsSTM32F031C8T7)
  • Balanced memory and temperature capability within the C6 family (vsSTM32F031C4T7)

Catatan Desain

Place all required decoupling capacitors close to their corresponding VDDA, VDD, and VSS pins, with the shortest practical ground return paths. Keep analog sensor routing away from PWM, relay, motor-switching, and high-current LED-drive nodes. The 48-pin TQFP footprint also requires unobstructed access to the exposed pad or thermal land specified by the manufacturer, together with adequate copper for heat spreading.

Treat ADC inputs as analog signals even though they terminate at a digital MCU. Use short traces, isolate them from switching-current paths, and calculate the required acquisition time from the sensor output impedance and the MCU's sampling characteristics. Add filtering only where its bandwidth does not compromise the measurement, and validate offset, gain, noise, and temperature behavior on the assembled PCB rather than relying on simulation alone.

Do not select a replacement solely by package and Flash capacity. Before substituting an STM32F031 variant, compare pin multiplexing, power pins, clock pins, boot behavior, interrupt assignments, ADC channels, timer resources, and temperature grade. Revalidate startup code and firmware, especially when moving between 16 KB, 32 KB, and 64 KB Flash devices because linker placement and bootloader assumptions may change.

Design the 2.5 V to 3.3 V supply with adequate margin for startup current, analog load, peripheral activity, and temperature. Confirm the regulator's transient behavior against the MCU's supply requirements and use local bulk capacitance where load steps occur. Brownout behavior, watchdog recovery, and controlled reset-state GPIOs should be included in the firmware because they determine whether the product can restart safely after an input-voltage disturbance.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer product page identifies the STM32F031C6 family and its operating specifications, but no explicit compliance declarations are stated here.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

STM32F031C6T7 datasheet STM32F031C6T7 pinout STM32F031C6T7 datasheet pdf STM32F031C6T7 48MHz 32KB flash STM32F031C6T7 48-TQFP pinout STM32F031C6T7 equivalent STM32F031C6T7 replacement STM32F031C6T7 cross reference STM32F031C6T7 vs STM32F031C8T7 STM32F031C6T7 footprint STM32F031C6T7 application circuit STM32F031C6T7 price STMicroelectronics STM32F031C6T7 STM32F031C6 12-bit ADC microcontroller STM32F031C6T7 stock

Komponen dan Tanda berkaitan

STMicroelectronics STM32F031C6T7 STM32F031C6T6 STM32F031C8T6 STM32F031C4T6 STM32F031C8T7 STM32F031C4T7 STM32F0 ARM Cortex-M0 microcontroller MCU 32-bit RISC embedded control 48-TQFP TQFN surface mount SMD 32 KB Flash 48 MHz 12-bit ADC 9 timers 2.5 V 3.3 V -40°C to +105°C industrial sensor acquisition motor control data acquisition LED lighting control connected sensor node
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ