STM32F072CBT7 - 48MHz Cortex-M0 MCU with USB/CAN | STMicroelectronics
Référence : STM32F072CBT7 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.9982 | $5,00 |
| 10 | $4.9982 | $49,98 |
| 100 | $4.9982 | $499,82 |
| 500 | $4.9982 | $2 499,10 |
| 1 000 | $4.9982 | $4 998,20 |
STM32F072CBT7 Présentation
A microcontroller is an integrated circuit that combines a processor core, memory, and peripheral interfaces on one semiconductor device. The STM32F0 series sits within the broader embedded-control hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. Compared with discrete logic controllers, an MCU provides firmware execution, state management, communication, timing, and direct control of external sensors, actuators, and human-interface circuits.
The verified product listing identifies a 48 MHz ARM Cortex-M0 core, 128 KB Flash, USB, CAN, and a 48-LQFP package. The STM32F072CBT7 is therefore suited to USB-enabled control devices, CAN-connected equipment, embedded instrumentation, and compact industrial modules. The exact RAM size, ADC specifications, GPIO count, supply limits, and package dimensions are not included in the supplied verified data and should be confirmed in the manufacturer datasheet before a production design is released.
The MCU architecture supports embedded control workloads where deterministic peripheral operation and compact software support matter. USB and CAN are valuable when a design must communicate with a host, service tool, test fixture, or networked peripheral. Compared with a higher-performance Cortex-M system, the Cortex-M0 core provides a simpler embedded platform, while the 48 MHz operating point remains suitable for control loops, protocol handling, user-interface scanning, and supervisory logic.
Typical applications include USB-to-control embedded modules, CAN-connected industrial controllers, compact sensor hubs, low-cost communication boards, and battery-powered instrumentation. Designers should provide stable power, decoupling, clock routing, reset handling, and programming access in accordance with the manufacturer reference information. The 48-LQFP package is also relatively easy to inspect and rework compared with very fine-pitch packages.
The main engineering trade-off is that the verified listing does not provide a complete electrical and memory map, so firmware planning should be based on the official datasheet and reference manual rather than assumptions. This page consolidates the verified distributor description, package information, sourcing links, and application context while clearly marking unspecified technical data for confirmation.
Alternatives de remplacement direct pour STM32F072CBT7 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32F072CBT7 (même facteur de forme et même empreinte) — différant par Package, Flash Memory, Architecture, Mounting Type, Core.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32F103CBT7
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →STM32F030CBT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32F030CCT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1.48 / unité
Voir la fiche technique →STM32F103R8T7
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →STM32F072C8T6
✅ Remplacement direct✓ En stock
$5.4354 / unité
Voir la fiche technique →STM32F072CBT7 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| CPU Core | ARM Cortex-M0 |
| CPU Frequency | 48 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| USB Support | Yes |
| CAN Support | Yes |
| Boîtier | 48-LQFP, 7 x 7 mm |
| Architecture | 32-bit |
| Microcontroller Series | STM32F0 |
| Device Line | STM32F072 |
| Operating Supply | 3.3 V |
Guide de configuration des broches du STM32F072CBT7 48-lqfp, 7 x 7 mm
Configuration des broches du STM32F072CBT7 (boîtier 48-lqfp, 7 x 7 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32F072CBT7.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32F072CBT7 convient pour 6 applications: USB Embedded Controller, CAN-Connected Industrial Module, USB-to-Control Service Tool, Compact Instrumentation Controller, CAN and USB Communications Hub, Embedded Sensor and Actuator Controller.
USB Embedded Controller
The STM32F072CBT7 fits USB-connected control modules because its verified feature set combines USB, a 48 MHz ARM Cortex-M0 core, and 128 KB Flash in a 48-LQFP package. A design can use the MCU for configuration, supervisory control, status reporting, and peripheral monitoring while communicating with a host. The USB electrical interface and firmware still require verification against the official documentation, and the external connector, protection network, and power design remain system-level responsibilities.
Recommandé
CAN-Connected Industrial Module
The verified STM32F072CBT7 specification identifies CAN support, making the device suitable for compact industrial control modules that exchange state and commands over a CAN bus. Its 48 MHz Cortex-M0 core can handle protocol handling, supervisory logic, and control-loop tasks while 128 KB Flash stores application firmware. An external CAN transceiver, bus protection, termination, grounding, and firmware validation remain necessary; those details are not supplied by the verified snippets.
Recommandé
USB-to-Control Service Tool
The STM32F072CBT7 can serve as the controller in a USB-connected service or calibration tool. USB provides a practical connection to a computer, while the MCU manages configuration storage, sensor reads, actuator commands, and status responses. The verified 128 KB Flash and 48 MHz operating point support a compact embedded application, but the final device selection depends on USB speed, connector implementation, firmware stack, and electrical requirements that must be checked in the manufacturer datasheet.
Recommandé
Compact Instrumentation Controller
With a 48 MHz Cortex-M0 core and USB connectivity, the STM32F072CBT7 is appropriate for compact instrumentation that records measurements, manages configuration, and exports results to a host. Its 48-LQFP 7 x 7 mm package can simplify assembly compared with very fine-pitch alternatives. The supplied data does not specify ADC performance, RAM, operating-temperature limits, or analog resources, so instrumentation requirements must be confirmed before committing the MCU.
Recommandé
CAN and USB Communications Hub
The STM32F072CBT7 is a logical candidate for a dual-communication embedded hub because both USB and CAN are explicitly listed in the verified product description. The MCU can bridge or supervise traffic, expose configuration, and provide control functions without requiring a high-end application processor. The actual bridge topology, buffering strategy, protocol behavior, timing, and fault handling must be designed and tested against the complete STMicroelectronics documentation and reference information.
Recommandé
Embedded Sensor and Actuator Controller
The STM32F072CBT7 can coordinate sensors and actuators in a compact embedded product because it combines a 48 MHz ARM Cortex-M0 core with 128 KB Flash and communication interfaces. USB can be used for configuration and diagnostics, while CAN can connect the controller to a broader equipment network. Exact GPIO, ADC, timer, and electrical capabilities are not included in the supplied data and must be checked before assigning pins or selecting sensors and actuators.
Recommandé
Données de référence d'ingénierie pour STM32F072CBT7 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F103CBT7 | STM32F030CBT6 | STM32F030CCT6 | STM32F103R8T7 | STM32F072C8T6 |
|---|---|---|---|---|---|---|
| Package | 48-LQFP, 7 x 7 mm | LQFP-48 | LQFP-48 | LQFP-48 | LQFP-64 | LQFP-48 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Frequency | 48 MHz | 72 MHz | 48 MHz | 48 MHz | 72 MHz | 48 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 256 KB | 64 KB | 64 KB |
| CAN Support | Yes | Yes | No | No | Yes | Yes |
Principaux différenciateurs
- Verified USB and CAN capability in the target device (vs STM32F030CBT6)
- 48 MHz Cortex-M0 architecture (vs STM32F103CBT7)
- Confirmed 128 KB Flash capacity (vs STM32F072C8T6)
Notes de conception
Use the verified 3.3 V supply designation only as a starting point for power architecture; confirm the full recommended operating range, absolute maximum limits, and peripheral-specific supply requirements from the official datasheet. Place the local supply bypass capacitors close to the MCU power pins and maintain the vendor-recommended startup and decoupling layout. Power sequencing, USB bus-powered operation, and CAN transceiver supply requirements should be reviewed before layout release.
Treat the 48-LQFP 7 x 7 mm package as a mixed-signal and communications layout problem. Route USB and CAN signals with controlled return paths, keep switching or high-current nodes away from sensitive clocks, and provide a clean ground reference. External CAN transceivers require protection and termination strategy; USB requires connector, ESD, and routing decisions. The verified snippets do not provide the complete pinout, so do not finalize PCB routing until the official package drawing is available.
Plan programming, reset, clock, and debug access before fixing the board outline. The supplied data confirms USB but does not specify programming or debug interfaces, so the design should not assume that a particular SWD, bootloader, or USB mode is available. Validate the startup state, reset behavior, clock source, and firmware update workflow against the manufacturer's reference documentation.
Do not select a replacement solely because it is another STM32 MCU in a 48-LQFP package. Pin names, alternate functions, USB and CAN peripheral details, memory size, electrical limits, and software support can differ materially between STM32 families and suffixes. The supplied cross-reference results do not verify drop-in equivalence, so every proposed alternative requires a pin-by-pin comparison and firmware review.
Informations de conformité
The supplied verified snippets do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. Compliance must be confirmed from the manufacturer product documentation and applicable distributor records.