STM32F334C6T7 - 72MHz Cortex-M4 MCU | STMicroelectronics
Référence : STM32F334C6T7 ✓ ActifSTM32F334C6T7 Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interfaces onto one device. The STM32F334C6 belongs to the STM32F3 family of 32-bit embedded microcontrollers, where the Cortex-M4 core provides deterministic real-time instruction execution alongside event-driven peripheral handling. STM32F334C6T7 is suited to applications requiring compact packaging, moderate program memory, fast control-loop execution, and mixed-signal measurement.
Key device characteristics include a 72 MHz maximum core frequency, 32 KB Flash organized as 32K x 8, 16 KB SRAM, and a 3.3 V operating class as identified for the STM32F334C6T7. The STM32F334 family also incorporates two ADCs, three DAC channels, and three comparators, providing useful resources for signal acquisition, analog output, and threshold-based control. Its 48-pin LQFP package exposes a broad set of digital and analog functions while remaining suitable for conventional leaded assembly.
The Cortex-M4 architecture supports efficient digital signal processing with single-precision floating-point capability. Its 72 MHz operating point allows control calculations, peripheral servicing, and communication handling to coexist in compact embedded designs. Combined with the STM32F334 family's analog peripherals, the device can reduce external component count in sensor, actuator, and instrumentation designs by consolidating measurement, comparison, and waveform-generation functions.
Typical uses include industrial sensor modules, motor and actuator controllers, compact power-conversion controllers, measurement instruments, and embedded IoT equipment. The 32 KB Flash capacity is most appropriate for firmware with focused real-time control rather than extensive graphical interfaces or large data storage. The 16 KB SRAM can hold working state, communication buffers, and interrupt-handling data without requiring external memory in typical designs.
PCB design should preserve clean analog grounding, route sensitive analog inputs away from fast switching edges, and place decoupling capacitors close to the appropriate supply pins. Designers should also review the manufacturer datasheet for the exact pin assignments, startup requirements, clock limits, and unused-pin treatment before releasing a layout.
This product record combines the manufacturer product identity, distributor package and memory details, replacement analysis, and application-focused engineering guidance. It supports faster qualification by connecting the Cortex-M4 performance, 32 KB Flash capacity, 16 KB SRAM, analog resources, and 48-LQFP footprint to practical design decisions.
Alternatives de remplacement direct pour STM32F334C6T7 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32F334C6T7 (même facteur de forme et même empreinte) — différant par Package, Product Type.
STM32F334C6T6
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →STM32F334C6T7 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M4 microcontroller IC |
| Processor Core | Arm Cortex-M4 with floating-point capability |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 16 KB |
| Supply Voltage Class | 3.3 V |
| Boîtier | 48-LQFP (7 x 7 mm) |
| Total Pin Count | 48 pins |
| ADC Count | 2 ADCs |
| DAC Channel Count | 3 DAC channels |
| Comparator Count | 3 comparators |
| Architecture | 32-bit RISC |
| Type de montage | Surface mount |
Guide de configuration des broches du STM32F334C6T7 48-lqfp (7 x 7 mm)
Configuration des broches du STM32F334C6T7 (boîtier 48-lqfp (7 x 7 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32F334C6T7.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32F334C6T7 convient pour 6 applications: Industrial Sensor Controller, Compact Motor and Actuator Control, Precision Measurement Instrument, Embedded IoT Condition Monitoring, Medical and Diagnostic Instrument Control, Automated Test and Measurement.
Industrial Sensor Controller
The STM32F334C6T7 fits compact industrial sensor modules that need fast signal acquisition and deterministic control without a large processor footprint. Its 72 MHz Cortex-M4 core can execute filtering, compensation, and communication tasks, while the STM32F334 family's two ADCs support analog measurement channels. With 32 KB Flash and 16 KB SRAM, it is best suited to focused firmware rather than large data buffers. Place the MCU close to the sensor interface, keep analog traces away from switching nodes, and decouple each supply rail according to the manufacturer datasheet.
Recommandé
Compact Motor and Actuator Control
The STM32F334C6T7 is appropriate for small motor, solenoid, valve, and actuator controllers where fast control calculations must coexist with analog protection functions. The 72 MHz Cortex-M4 core provides computational headroom for current-loop or position-control routines, while three comparators can support threshold detection and the ADCs can monitor feedback signals. The three DAC channels can generate analog test or bias waveforms where required. Firmware should include deliberate startup states, current limits, watchdog handling, and safe disable behavior for every power stage.
Recommandé
Precision Measurement Instrument
The STM32F334C6T7 can serve as the control processor in compact measurement instruments that combine analog sensing with digital calibration. Two ADCs provide the sampling front end, the Cortex-M4 floating-point capability supports arithmetic-intensive filtering and calibration, and the DAC channels can generate excitation or reference waveforms. Its 72 MHz operating speed allows responsive acquisition and filtering, while 16 KB SRAM accommodates bounded working buffers. For high-accuracy designs, separate analog and digital return paths, use quiet reference components, and follow the layout guidance in the manufacturer datasheet.
Recommandé
Embedded IoT Condition Monitoring
The STM32F334C6T7 suits connected condition-monitoring equipment that measures vibration, temperature, pressure, or electrical state and processes results locally. The 72 MHz Cortex-M4 core can combine sensor sampling with filtering and communication-protocol handling, while 32 KB Flash limits the firmware to a compact control and connectivity stack. Its 48-LQFP package provides a practical balance between pin access and board size. Designers should budget memory for network buffers and logging, and should keep radio or switching circuitry away from sensitive analog inputs to preserve measurement integrity.
Recommandé
Medical and Diagnostic Instrument Control
The STM32F334C6T7 can support the supervisory control layer of compact medical or diagnostic instruments where deterministic processing and local analog measurement are required. The two ADC resources, three comparators, and three DAC channels enable signal-chain integration, while the Cortex-M4 floating-point core assists calibration and filtering. The 32 KB Flash and 16 KB SRAM are appropriate for focused embedded software rather than large user interfaces. Any medical deployment also requires application-specific safety analysis, validated firmware, electrical isolation where applicable, and compliance review independent of the MCU specification.
Recommandé
Automated Test and Measurement
The STM32F334C6T7 is well suited to automated test equipment that sequences measurements, evaluates limits, and drives external fixtures. Its fast Cortex-M4 core can execute test algorithms, the comparators support threshold decisions, and the DAC channels can create stimulus or reference signals. At 72 MHz with 32 KB Flash and 16 KB SRAM, the device targets compact, deterministic test logic rather than host-level data processing. The LQFP package also provides accessible leads for automated assembly. Ensure fixture drivers have independent reset behavior and protect control outputs when firmware enters a fault state.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32F334C6T7 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32F334C6T6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 72 MHz | 72 MHz |
| Flash Memory | 32 KB | 32 KB |
| SRAM | 16 KB | 16 KB |
| Temperature Grade | T7 extended-temperature ordering code | T6 commercial-temperature ordering code |
| ADC Count | 2 ADCs | 2 ADCs |
| DAC Channel Count | 3 DAC channels | 3 DAC channels |
| Comparator Count | 3 comparators | 3 comparators |
Principaux différenciateurs
- Maintains the full STM32F334C6 hardware configuration (vs STM32F334C6T6)
- Provides the higher-temperature ordering option (vs STM32F334C6T6)
- Combines digital control with integrated analog resources (vs STM32F302CBT6)
Notes de conception
Place the required input, output, and internal-regulator decoupling capacitors directly beside their associated STM32F334C6T7 pins. Separate analog and digital return paths until they join at the device's designated ground connection, and provide the exact capacitor values and voltage tolerances specified by the manufacturer datasheet. Avoid routing high-current return paths beneath sensitive analog inputs because shared copper can convert switching current into measurement error.
Assign oscillator, debug, reset, and communication signals early in PCB layout so their routes remain short and predictable. Keep crystal or clock traces compact, maintain the required ground guard where recommended, and avoid crossing them with fast digital edges. For analog channels, use matched routing where appropriate and terminate unused analog inputs exactly as prescribed in the manufacturer pin-description guidance.
Use the STM32F334's 72 MHz operating limit as a system constraint and verify timing with margin rather than treating it as a guaranteed sustained workload. Constrain clock distribution, minimize stub branches, and review external communication traces for impedance and return-path continuity. If an ADC signal has a high source impedance, add suitable buffering or acquisition time in firmware to preserve conversion accuracy.
Do not treat every 48-LQFP STM32F3 device as interchangeable with the STM32F334C6T7. The STM32F302CBT6 comparison example uses the same general package family but has 128 KB Flash and 24 KB SRAM rather than 32 KB Flash and 16 KB SRAM. Firmware size, peripheral mapping, clock configuration, and package-level electrical compatibility must be checked before approving a substitution.
Informations de conformité
The target MPN and package were confirmed, but no product-specific compliance declarations were identified in the available records. Confirm RoHS, REACH, halogen-free, and automotive qualification status with STMicroelectronics for the exact ordering code.