STM32H725AGI6 - 550MHz Cortex-M7 MCU | STMicroelectronics
Référence : STM32H725AGI6 ✓ ActifSTM32H725AGI6 Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic on one package. The STM32H7 family belongs to the broader embedded-processor hierarchy: Cortex-M7 core, 32-bit RISC microcontroller, embedded processing IC, and semiconductor. These devices execute firmware from embedded flash while using tightly coupled SRAM for working data and buffers.
The STM32H725AGI6 provides 550 MHz processing performance, 1 MB of flash, and 564 KB of RAM. Its L1 cache improves instruction and data throughput in memory-intensive workloads, while the external memory interface supports additional storage or memory-mapped peripherals. The digital signal-processing and floating-point capabilities make the device useful for real-time control, industrial automation, communications equipment, and audio or other DSP-oriented systems.
STMicroelectronics describes the STM32H725xE/G devices around the high-performance Arm Cortex-M7 32-bit RISC core operating up to 550 MHz. The device family includes an SMPS and a reduced selection of peripherals intended to provide performance while controlling device cost, board area, and power-management complexity. Its 169-ball package supports compact designs but requires careful escape routing and dense PCB layout.
Typical applications include industrial control systems, networked embedded equipment, high-speed data acquisition, motor-control platforms, and communications gateways. The large on-chip memory allows substantial firmware, protocol stacks, diagnostics, and control logic to operate without an external flash device. The 550 MHz core also provides useful scheduling headroom for real-time processing and DSP tasks.
PCB implementation should account for the 7 x 7 mm UFBGA geometry, high pin density, multilayer escape routing, and thermal management under sustained maximum-frequency operation. Power sequencing, decoupling, clock stability, and signal-integrity practices are critical for reliable operation. Use the STMicroelectronics pinout and reference-manual documentation when assigning ball locations and peripheral multiplexing.
This product summary combines the manufacturer specifications, package identification, sourcing information, and engineering guidance relevant to the STM32H725AGI6. It is intended to help engineers evaluate performance, memory capacity, board-space requirements, and drop-in replacement options before beginning a high-density STM32H7 PCB design.
Alternatives de remplacement direct pour STM32H725AGI6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
STM32H725AGI3
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32H725AGI6 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit RISC microcontroller |
| Processor Core | Arm Cortex-M7 |
| Maximum CPU Frequency | 550 MHz |
| Architecture | 32-bit |
| Flash Memory | 1 MB |
| Flash Organization | 1 M x 8 bits |
| RAM | 564 KB |
| FPU | Double-precision floating-point unit |
| Cache | L1 cache |
| External Memory Interface | Supported |
| Power Management | SMPS |
| Boîtier | 169-UFBGA, 7 x 7 mm |
| Type de montage | Surface mount |
| Ethernet Support | Supported |
Guide de configuration des broches du STM32H725AGI6 169-ufbga, 7 x 7 mm
Configuration des broches du STM32H725AGI6 (boîtier 169-ufbga, 7 x 7 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32H725AGI6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32H725AGI6 convient pour 6 applications: Industrial Automation Controllers, Communications Gateways, Real-Time Data Acquisition, Motor Control Platforms, Embedded Audio and DSP, Secure Networked IoT Gateways.
Industrial Automation Controllers
The STM32H725AGI6 fits industrial automation controllers that must combine fast control-loop execution with substantial local memory. Its 550 MHz Arm Cortex-M7 core and double-precision floating-point unit support filtering, motion calculations, and supervisory logic, while 1 MB of flash and 564 KB of RAM help retain protocols and working buffers on-chip. The external memory interface provides a path to additional storage when data logging or display requirements exceed the internal memories. Designers should reserve the 7 x 7 mm UFBGA area for dense multilayer routing and validate timing margins under the selected voltage, clock, and temperature conditions.
Recommandé
Communications Gateways
The STM32H725AGI6 is suitable for communications gateways that must process multiple protocol stacks and transfer data through memory-intensive interfaces. The 550 MHz Cortex-M7 core provides headroom for protocol processing, the 564 KB RAM supports packet buffering, and the 1 MB flash can hold substantial gateway firmware. Ethernet support and the external memory interface help connect the controller to network hardware and additional storage. A practical design should isolate high-speed communications routes from sensitive clock and power distribution, while firmware validation should exercise sustained traffic at the intended operating frequency.
Recommandé
Real-Time Data Acquisition
The STM32H725AGI6 supports real-time data-acquisition systems that must sample, filter, and move data without excessive processor overhead. Its 550 MHz Arm Cortex-M7 core handles digital signal-processing tasks, while the double-precision floating-point unit supports arithmetic in control and analysis routines. The 564 KB RAM provides space for acquisition buffers, and 1 MB of flash accommodates firmware and calibration data. Because the device uses a compact 169-UFBGA package, designers should minimize analog and digital crosstalk, maintain continuous return paths beneath high-speed nets, and confirm acquisition timing with the selected external interface clocking.
Recommandé
Motor Control Platforms
The STM32H725AGI6 is well suited to sophisticated motor-control platforms where fast computation is needed alongside network communication and supervisory control. The 550 MHz Cortex-M7 core can execute control algorithms, the floating-point unit assists with mathematical transforms, and the 564 KB RAM can support control-state and diagnostic buffers. Its Ethernet capability enables connection to higher-level factory equipment. Layout should separate switching-node power paths from sensitive control signals, preserve adequate thermal copper around the compact package, and validate dead time, current sensing, and protection behavior under worst-case electrical conditions.
Recommandé
Embedded Audio and DSP
The STM32H725AGI6 can serve as the central processor in embedded audio and DSP products that combine real-time signal processing with network control. Its Cortex-M7 core operates up to 550 MHz, the double-precision floating-point unit accelerates arithmetic-heavy routines, and 564 KB of RAM can support mix buffers and intermediate samples. The external memory interface allows larger sample or program storage where required. Board implementation should control clock jitter and supply noise, preserve short return paths for digital signals, and use the manufacturer's pin multiplexing rules to avoid conflicts among memory, audio, and debug functions.
Recommandé
Secure Networked IoT Gateways
The STM32H725AGI6 is appropriate for connected industrial IoT gateways that require more compute and memory than a basic microcontroller while retaining a compact footprint. The 550 MHz Cortex-M7 core can run protocol processing, security workloads, and local control concurrently, while 1 MB of flash and 564 KB of RAM reduce reliance on external components. Ethernet support supports wired connectivity, and the external memory interface permits additional storage. Deployment should include secure boot, controlled debug access, appropriate peripheral lock configuration, and PCB review focused on Ethernet signal integrity and power sequencing.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32H725AGI6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32H725AGI3 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 169-UFBGA (7x7) | 169-PBGA |
| Processor Core | Arm Cortex-M7 | Arm Cortex-M7 |
| Maximum CPU Frequency | 550 MHz | 550 MHz |
Principaux différenciateurs
- High-performance Cortex-M7 processing (vs STM32H725AGI3)
- Large integrated memory configuration (vs STM32H725AGI3)
- DSP-oriented floating-point hardware (vs STM32H725AGI3)
- Connectivity and expansion capability (vs STM32H725AGI3)
Notes de conception
The 169-UFBGA device requires a multilayer PCB with fine-pitch escape routing. Follow the STMicroelectronics package drawing and land-pattern guidance for ball assignment, solder-mask geometry, and exposed thermal or ground-ball connections. Route clocks and high-speed interfaces as controlled-impedance nets where applicable, and provide continuous ground-reference planes beneath signal transitions to suppress return-path discontinuities.
Place local decoupling capacitors at the supply balls and connect them through short, low-inductance paths. Validate startup sequencing, voltage ramps, SMPS configuration, and peripheral current behavior across the intended clock settings. Because the controller can operate at 550 MHz, power-supply impedance and clock jitter can materially affect execution margin even when the nominal core frequency is within specification.
Estimate junction temperature from maximum ambient temperature, total device dissipation, and the effective thermal resistance of the assembled PCB rather than using package dimensions alone. Use the manufacturer's electrical characteristics for current calculations and label any calculation as an estimate. Preserve thermal copper beneath the UFBGA where the package drawing permits it, and avoid trapping heat between the board and an enclosure.
External memory and communication interfaces can create demanding edge rates even when the CPU runs at a lower frequency. Keep interface traces short, provide adjacent return paths, match impedance to the selected media, and avoid routing memory signals across plane splits. Validate timing with the actual stack-up and peripheral configuration, including voltage scaling and flash wait-state assumptions used at 550 MHz.
Do not assume that two STM32H725 order codes are interchangeable solely because their core frequency and package descriptions look similar. Confirm the exact suffix, temperature range, qualification status, and ball assignment in STMicroelectronics ordering documentation. Also distinguish the physical UFBGA package designation from the PBGA terminology used in some cross-reference listings before approving a footprint or replacement.
Informations de conformité
No explicit compliance or qualification declarations are included in the product records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification requirements with STMicroelectronics for the exact order code.