STMicroelectronics

STM32H725AGI6 - 550MHz Cortex-M7 MCU | STMicroelectronics

부품 번호: STM32H725AGI6 ✓ 활성
169-UFBGA, 7 x 7 mm Package 550 MHz Speed 1 MB Memory
MOQ: 1 |

STM32H725AGI6 개요

The STMicroelectronics STM32H725AGI6 is a high-performance 32-bit Arm Cortex-M7 microcontroller rated for operation up to 550 MHz, with 1 MB of flash memory and 564 KB of RAM in a 169-UFBGA 7 x 7 mm package. It combines a double-precision floating-point unit, L1 cache, external memory interface, SMPS, and a subset of high-performance peripherals for demanding embedded control, communications, and signal-processing systems.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic on one package. The STM32H7 family belongs to the broader embedded-processor hierarchy: Cortex-M7 core, 32-bit RISC microcontroller, embedded processing IC, and semiconductor. These devices execute firmware from embedded flash while using tightly coupled SRAM for working data and buffers.

The STM32H725AGI6 provides 550 MHz processing performance, 1 MB of flash, and 564 KB of RAM. Its L1 cache improves instruction and data throughput in memory-intensive workloads, while the external memory interface supports additional storage or memory-mapped peripherals. The digital signal-processing and floating-point capabilities make the device useful for real-time control, industrial automation, communications equipment, and audio or other DSP-oriented systems.

STMicroelectronics describes the STM32H725xE/G devices around the high-performance Arm Cortex-M7 32-bit RISC core operating up to 550 MHz. The device family includes an SMPS and a reduced selection of peripherals intended to provide performance while controlling device cost, board area, and power-management complexity. Its 169-ball package supports compact designs but requires careful escape routing and dense PCB layout.

Typical applications include industrial control systems, networked embedded equipment, high-speed data acquisition, motor-control platforms, and communications gateways. The large on-chip memory allows substantial firmware, protocol stacks, diagnostics, and control logic to operate without an external flash device. The 550 MHz core also provides useful scheduling headroom for real-time processing and DSP tasks.

PCB implementation should account for the 7 x 7 mm UFBGA geometry, high pin density, multilayer escape routing, and thermal management under sustained maximum-frequency operation. Power sequencing, decoupling, clock stability, and signal-integrity practices are critical for reliable operation. Use the STMicroelectronics pinout and reference-manual documentation when assigning ball locations and peripheral multiplexing.

This product summary combines the manufacturer specifications, package identification, sourcing information, and engineering guidance relevant to the STM32H725AGI6. It is intended to help engineers evaluate performance, memory capacity, board-space requirements, and drop-in replacement options before beginning a high-density STM32H7 PCB design.

드롭인 대체품: STM32H725AGI6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

STM32H725AGI3

✅ 드롭인
📦 169-UFBGA (7x7)
Identical 550 MHz Cortex-M7 performance class; the I3 suffix denotes a different order-code grade, with temperature and qualification details requiring confirmation

📋 참조 대체품 (카탈로그에 없음)

STM32H725AGI6 최대 정격 & 전기적 특성

Product Type 32-bit RISC microcontroller
Processor Core Arm Cortex-M7
Maximum CPU Frequency 550 MHz
Architecture 32-bit
Flash Memory 1 MB
Flash Organization 1 M x 8 bits
RAM 564 KB
FPU Double-precision floating-point unit
Cache L1 cache
External Memory Interface Supported
Power Management SMPS
패키지 169-UFBGA, 7 x 7 mm
실장 유형 Surface mount
Ethernet Support Supported

STM32H725AGI6 169-ufbga, 7 x 7 mm 핀 구성 가이드

STM32H725AGI6(169-ufbga, 7 x 7 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

STM32H725AGI6의 169-ufbga, 7 x 7 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: STM32H725AGI6.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

STM32H725AGI6 적합 용도: 6 애플리케이션s: Industrial Automation Controllers, Communications Gateways, Real-Time Data Acquisition, Motor Control Platforms, Embedded Audio and DSP, Secure Networked IoT Gateways.

🏭

Industrial Automation Controllers

The STM32H725AGI6 fits industrial automation controllers that must combine fast control-loop execution with substantial local memory. Its 550 MHz Arm Cortex-M7 core and double-precision floating-point unit support filtering, motion calculations, and supervisory logic, while 1 MB of flash and 564 KB of RAM help retain protocols and working buffers on-chip. The external memory interface provides a path to additional storage when data logging or display requirements exceed the internal memories. Designers should reserve the 7 x 7 mm UFBGA area for dense multilayer routing and validate timing margins under the selected voltage, clock, and temperature conditions.

🌐

Communications Gateways

The STM32H725AGI6 is suitable for communications gateways that must process multiple protocol stacks and transfer data through memory-intensive interfaces. The 550 MHz Cortex-M7 core provides headroom for protocol processing, the 564 KB RAM supports packet buffering, and the 1 MB flash can hold substantial gateway firmware. Ethernet support and the external memory interface help connect the controller to network hardware and additional storage. A practical design should isolate high-speed communications routes from sensitive clock and power distribution, while firmware validation should exercise sustained traffic at the intended operating frequency.

🖥️

Real-Time Data Acquisition

The STM32H725AGI6 supports real-time data-acquisition systems that must sample, filter, and move data without excessive processor overhead. Its 550 MHz Arm Cortex-M7 core handles digital signal-processing tasks, while the double-precision floating-point unit supports arithmetic in control and analysis routines. The 564 KB RAM provides space for acquisition buffers, and 1 MB of flash accommodates firmware and calibration data. Because the device uses a compact 169-UFBGA package, designers should minimize analog and digital crosstalk, maintain continuous return paths beneath high-speed nets, and confirm acquisition timing with the selected external interface clocking.

⚡

Motor Control Platforms

The STM32H725AGI6 is well suited to sophisticated motor-control platforms where fast computation is needed alongside network communication and supervisory control. The 550 MHz Cortex-M7 core can execute control algorithms, the floating-point unit assists with mathematical transforms, and the 564 KB RAM can support control-state and diagnostic buffers. Its Ethernet capability enables connection to higher-level factory equipment. Layout should separate switching-node power paths from sensitive control signals, preserve adequate thermal copper around the compact package, and validate dead time, current sensing, and protection behavior under worst-case electrical conditions.

🎧

Embedded Audio and DSP

The STM32H725AGI6 can serve as the central processor in embedded audio and DSP products that combine real-time signal processing with network control. Its Cortex-M7 core operates up to 550 MHz, the double-precision floating-point unit accelerates arithmetic-heavy routines, and 564 KB of RAM can support mix buffers and intermediate samples. The external memory interface allows larger sample or program storage where required. Board implementation should control clock jitter and supply noise, preserve short return paths for digital signals, and use the manufacturer's pin multiplexing rules to avoid conflicts among memory, audio, and debug functions.

🧩

Secure Networked IoT Gateways

The STM32H725AGI6 is appropriate for connected industrial IoT gateways that require more compute and memory than a basic microcontroller while retaining a compact footprint. The 550 MHz Cortex-M7 core can run protocol processing, security workloads, and local control concurrently, while 1 MB of flash and 564 KB of RAM reduce reliance on external components. Ethernet support supports wired connectivity, and the external memory interface permits additional storage. Deployment should include secure boot, controlled debug access, appropriate peripheral lock configuration, and PCB review focused on Ethernet signal integrity and power sequencing.

추천 제품 요약

STM32H725AGI6 STMicroelectronics 사용처: Industrial Automation Controllers, Communications Gateways, Real-Time Data Acquisition, Motor Control Platforms, Embedded Audio and DSP, Secure Networked IoT Gateways STM32H725AGI3 Closest STM32H725 family alternative 사용처: Industrial Automation Controllers, Real-Time Data Acquisition, Motor Control Platforms, Secure Networked IoT Gateways STM32H725AGI6TR Tape-and-reel ordering configuration 사용처: Communications Gateways, Embedded Audio and DSP
What is the STM32H725AGI6?
The STM32H725AGI6 is a 32-bit Arm Cortex-M7 microcontroller from STMicroelectronics that operates at up to 550 MHz. It provides 1 MB of flash, 564 KB of RAM, a double-precision floating-point unit, L1 cache, an external memory interface, and SMPS in a 169-UFBGA package measuring 7 x 7 mm. These characteristics place it in the high-performance STM32H7 product family.
What are the key specifications of STM32H725AGI6?
The STM32H725AGI6 combines an Arm Cortex-M7 core, 550 MHz maximum operating frequency, 1 MB flash, 564 KB RAM, double-precision floating-point, L1 cache, an external memory interface, and SMPS. The manufacturer identifies the physical device as a 169-UFBGA package measuring 7 x 7 mm. These figures make it suitable for real-time control, communications, data acquisition, and DSP-oriented embedded systems.
Where can I download the STM32H725AGI6 datasheet?
The official STM32H725AGI6 documentation is available through the STMicroelectronics STM32H725AG product page and the STM32H725/735 documentation portal. The product page identifies the Cortex-M7 core and 550 MHz operating rate, while the documentation portal contains the family datasheet and supporting resources. Use the manufacturer materials for the authoritative pin assignments, electrical limits, and peripheral configuration.
Where can I find the STM32H725AGI6 pinout?
The STM32H725AGI6 pinout is documented by STMicroelectronics for the 169-UFBGA, 7 x 7 mm package. Use the manufacturer datasheet pin-description table and package drawing because all 169 balls must be assigned, including power, ground, debug, clock, and general-purpose I/O functions. The package drawing also defines the ball numbering orientation needed for PCB land patterns.
How much RAM and flash does the STM32H725AGI6 have?
The STM32H725AGI6 contains 1 MB of flash memory organized as 1 M x 8 bits and 564 KB of RAM. This combination allows firmware, protocol stacks, control logic, and working buffers to remain largely on-chip. The memory figures are identified for the STM32H725AGI6 in the manufacturer product and distributor technical listings.
What clock speed does the STM32H725AGI6 use?
The STM32H725AGI6 operates at up to 550 MHz using its Arm Cortex-M7 32-bit RISC core. The manufacturer describes the STM32H725xE/G devices around this maximum frequency. Actual operating speed depends on the configured clock tree, power policy, voltage conditions, flash wait states, and peripheral performance requirements.
What is the difference between STM32H725AGI6 and STM32H725AGI3?
The STM32H725AGI6 and STM32H725AGI3 are identified as equivalent PBGA169 devices within the STM32H725 family, both using the 550 MHz Cortex-M7 platform. Their order codes indicate different device variants, so the final temperature grade, qualification status, and ordering details must be checked against the manufacturer ordering information before production substitution. The STM32H725AGI6 is the specified source configuration for this product.
Can STM32H725AGI3 replace STM32H725AGI6?
The STM32H725AGI3 is listed as an equivalent alternative to the STM32H725AGI6 and uses the same 169-PBGA class of package. It is therefore the closest identified drop-in candidate, but production use should confirm ball compatibility, temperature grade, qualification, and lifecycle requirements in the STMicroelectronics ordering documentation. Software configuration must also be reviewed for any grade-dependent peripheral or test differences.
What is the best drop-in replacement for STM32H725AGI6?
The STM32H725AGI3 is the closest identified drop-in replacement because it is described as an equivalent 550 MHz Cortex-M7 device in the same 169-PBGA package class. A cross-brand replacement was not established with the required pin-and-ball compatibility evidence. For an STM32H725AGI6 redesign, verify the device revision, temperature range, qualification, and all ball assignments against the manufacturer documentation.
What can replace the STM32H725AGI6?
The STM32H725AGI3 is the supported replacement candidate for the STM32H725AGI6 based on its equivalent 550 MHz Cortex-M7 positioning and matching 169-PBGA package class. No cross-brand part is presented as a drop-in replacement because equivalent pin, memory, peripheral, electrical, and firmware compatibility could not be established. Confirm qualification and operating-temperature requirements before approving the substitution.
When should I choose STM32H725AGI6 instead of STM32H725AGI3?
Choose the STM32H725AGI6 when its exact ordering configuration matches the required STM32H725 family grade, qualification, and temperature requirements. Choose the STM32H725AGI3 only after confirming that its order code satisfies the same mechanical and electrical constraints. Both devices center on the 550 MHz Cortex-M7 platform, so the decisive factors are device-grade requirements, lifecycle approval, and production documentation.
Is STM32H725AGI6 suitable for industrial and communications systems?
The STM32H725AGI6 is suitable for industrial and communications designs that require substantial embedded processing, on-chip memory, and high-speed serial interfaces. Its 550 MHz Cortex-M7 core, 1 MB flash, 564 KB RAM, Ethernet support, external memory interface, and DSP-oriented floating-point hardware support demanding real-time workloads. The exact temperature grade and operating-voltage limits must be confirmed for the deployment environment.
Where can I buy STM32H725AGI6 and what is the lead time?
Use the Request a Quote form on this page to request STM32H725AGI6 pricing, stock confirmation, minimum order quantity, and current lead time. The listing page does not provide a reliable quantity-break schedule or a guaranteed lead-time commitment, so purchasing teams should obtain current scheduling directly through the form. The exact 169-UFBGA package and ordering code should be stated in the request.
What is the price of STM32H725AGI6?
Use the Request a Quote form on this page for a current STM32H725AGI6 unit price, volume breaks, and stock allocation. A publicly indexed listing displays a starting amount, but it is not a complete quantity-break table suitable for an approved purchasing schedule. The quotation request should include the required quantity, target date, and whether reel packaging is required.
Is STM32H725AGI6 in stock?
The STM32H725AGI6 is shown as orderable by multiple channel listings, but real-time stock should be confirmed through the Request a Quote form on this page. Quantity, delivery schedule, and traceability can change between inventory updates. The request should identify the required shipment date and whether factory-sealed reel packaging is mandatory.

엔지니어링 참조 데이터: STM32H725AGI6 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the STM32H725AGI6 when a compact 7 x 7 mm design needs a 550 MHz Cortex-M7 core, 1 MB of flash, 564 KB of RAM, double-precision floating-point hardware, Ethernet, and an external memory interface. It is particularly suitable for industrial controllers, communications gateways, real-time acquisition systems, and DSP-oriented equipment. The STM32H725AGI3 is the closest identified same-package family alternative and can be considered when its exact suffix satisfies the required temperature, qualification, lifecycle, and ordering conditions. A cross-brand replacement is not recommended for a pin-sensitive 169-UFBGA design because equivalent ball mapping, peripheral behavior, electrical limits, tool support, and firmware portability were not established. For any substitution, verify the manufacturer package drawing, pin table, electrical characteristics, peripheral population, and firmware support before releasing a new PCB revision.

대체품과의 비교

파라미터 이 제품 STM32H725AGI3
Brand STMicroelectronics STMicroelectronics
Package 169-UFBGA (7x7) 169-PBGA
Processor Core Arm Cortex-M7 Arm Cortex-M7
Maximum CPU Frequency 550 MHz 550 MHz

주요 차별점

  • High-performance Cortex-M7 processing (vs STM32H725AGI3)
  • Large integrated memory configuration (vs STM32H725AGI3)
  • DSP-oriented floating-point hardware (vs STM32H725AGI3)
  • Connectivity and expansion capability (vs STM32H725AGI3)

설계 노트

The 169-UFBGA device requires a multilayer PCB with fine-pitch escape routing. Follow the STMicroelectronics package drawing and land-pattern guidance for ball assignment, solder-mask geometry, and exposed thermal or ground-ball connections. Route clocks and high-speed interfaces as controlled-impedance nets where applicable, and provide continuous ground-reference planes beneath signal transitions to suppress return-path discontinuities.

Place local decoupling capacitors at the supply balls and connect them through short, low-inductance paths. Validate startup sequencing, voltage ramps, SMPS configuration, and peripheral current behavior across the intended clock settings. Because the controller can operate at 550 MHz, power-supply impedance and clock jitter can materially affect execution margin even when the nominal core frequency is within specification.

Estimate junction temperature from maximum ambient temperature, total device dissipation, and the effective thermal resistance of the assembled PCB rather than using package dimensions alone. Use the manufacturer's electrical characteristics for current calculations and label any calculation as an estimate. Preserve thermal copper beneath the UFBGA where the package drawing permits it, and avoid trapping heat between the board and an enclosure.

External memory and communication interfaces can create demanding edge rates even when the CPU runs at a lower frequency. Keep interface traces short, provide adjacent return paths, match impedance to the selected media, and avoid routing memory signals across plane splits. Validate timing with the actual stack-up and peripheral configuration, including voltage scaling and flash wait-state assumptions used at 550 MHz.

Do not assume that two STM32H725 order codes are interchangeable solely because their core frequency and package descriptions look similar. Confirm the exact suffix, temperature range, qualification status, and ball assignment in STMicroelectronics ordering documentation. Also distinguish the physical UFBGA package designation from the PBGA terminology used in some cross-reference listings before approving a footprint or replacement.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No explicit compliance or qualification declarations are included in the product records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification requirements with STMicroelectronics for the exact order code.

관련 검색

STM32H725AGI6 datasheet STM32H725AGI6 datasheet pdf STM32H725AGI6 pinout STM32H725AGI6 equivalent STM32H725AGI6 replacement STM32H725AGI6 cross reference STM32H725AGI6 footprint STM32H725AGI6 price STM32H725AGI6 stock STMicroelectronics STM32H725AGI6 STM32H725AGI6 550MHz Cortex-M7 STM32H725AGI6 169-UFBGA STM32H725AGI6 vs STM32H725AGI3 STM32H725AGI6 application circuit

관련 부품 & 용어

STMicroelectronics STM32H725AGI6 STM32H725AGI3 STM32H725AGI6TR STM32H725AG STM32H7 Arm Cortex-M7 32-bit RISC core microcontroller embedded processor semiconductor double-precision floating-point unit L1 cache external memory interface SMPS Ethernet 1 MB flash memory 564 KB RAM 550 MHz 169-UFBGA UFBGA package surface mount industrial automation communications gateway
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기