STM32L052K6T6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics
Référence : STM32L052K6T6 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $3.5543 | $3,55 |
| 10 | $3.5543 | $35,54 |
| 100 | $3.5543 | $355,43 |
| 500 | $3.5543 | $1 777,15 |
| 1 000 | $3.5543 | $3 554,30 |
STM32L052K6T6 Présentation
A microcontroller is a semiconductor that integrates a processor core, programmable memory, digital I/O, and peripherals into one device. The STM32L0 family belongs to the ARM Cortex-M microcontroller hierarchy and targets embedded systems where compact size, efficient processing, and low standby or operating power are important. Its peripheral integration reduces the component count needed for communications, timing, analog measurement, and control.
The verified product information identifies an ARM Cortex-M0+ core, 32 MHz operation, 32 KB Flash organized as 32K x 8, USB 2.0 crystal-less connectivity, and a 32-LQFP package. Distributor listings also identify I2C and SPI support, making the device relevant for sensor networks, USB-to-serial equipment, compact control boards, and low-power connected products. The exact SRAM, voltage range, temperature limits, and peripheral ratings were not supplied in the verified excerpts and therefore are not asserted here.
The crystal-less USB feature is a practical differentiator for designs that need USB connectivity without relying on a dedicated external crystal for the specified USB implementation. Firmware must still satisfy the USB clocking, impedance, power, and enumeration requirements described by the manufacturer. The 32 MHz Cortex-M0+ core provides a responsive platform for control logic while retaining the STM32 family's low-power positioning.
Typical applications include low-power IoT nodes, USB-connected sensors, industrial instrumentation, low-power control boards, compact data-acquisition products, and embedded automation modules. These uses benefit from the MCU's combination of USB, I2C, SPI, Flash, and a compact 32-LQFP footprint. The 7x7 mm package is easy to route on a reasonably dense PCB while preserving exposed assembly and inspection access.
Designers should verify the complete pinout, alternate-function mapping, power requirements, decoupling recommendations, clocking scheme, and USB layout against the official STM32L052K6 datasheet before layout release. USB differential routing, ground-return continuity, input filtering, and exposed-pad thermal design are more important than simply matching the package outline. Firmware should also confirm peripheral mapping and low-power-mode timing rather than assuming that a lower-power alternative is automatically interchangeable.
This page combines verified distributor and manufacturer listings with structured application, comparison, and design guidance. It is intended to help engineers identify the correct STM32L052K6T6 platform while separating confirmed data from parameters that still require direct datasheet confirmation.
Alternatives de remplacement direct pour STM32L052K6T6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32L052K6T6 (même facteur de forme et même empreinte) — différant par Flash Memory, Maximum CPU Frequency, Mounting Type, Package, Product Type.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32L052K8T6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32L010K8T6TR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32L051K6T6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32L062K8T6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32F030K6T6TR
✅ Remplacement direct✓ En stock
$0.7105 / unité
Voir la fiche technique →STM32L052K6T6 Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Core | ARM Cortex-M0+ |
| USB Connectivity | USB 2.0 crystal-less |
| Serial Interface | I2C |
| Serial Interface | SPI |
| Boîtier | 32-LQFP (7x7 mm) |
| Architecture | 32-bit |
| Power Class | Ultra-low-power |
| Type de montage | Surface-mount LQFP |
Guide de configuration des broches du STM32L052K6T6 32-lqfp (7x7 mm)
Configuration des broches du STM32L052K6T6 (boîtier 32-lqfp (7x7 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour STM32L052K6T6.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
STM32L052K6T6 convient pour 6 applications: USB-Connected Low-Power Sensor Node, Low-Power Industrial Control Module, USB-to-Digital Acquisition Interface, Compact Embedded Automation Controller, Portable Medical or Sensor Monitoring Module, Battery-Powered IoT Data Logger.
USB-Connected Low-Power Sensor Node
The STM32L052K6T6 fits USB-connected sensor nodes because the verified device combines a 32 MHz ARM Cortex-M0+ core, 32 KB Flash, USB 2.0 crystal-less connectivity, I2C, and SPI. It can supervise a sensor, format local data, and expose configuration or telemetry through USB while keeping the design compact. I2C is useful for short-distance digital sensors, while SPI can support higher-throughput devices. The 7x7 mm LQFP also leaves room for connectors and passive components on a small board. Verify USB power, differential routing, firmware support, and current-consumption behavior in the official documentation.
Recommandé
Low-Power Industrial Control Module
The STM32L052K6T6 is suitable for compact industrial control modules where the MCU must coordinate sensors, actuators, and communications without a large processing footprint. Its verified 32 MHz Cortex-M0+ performance and 32 KB Flash provide a platform for deterministic control firmware, while I2C and SPI support common embedded buses. The crystal-less USB feature can simplify configuration and service connections in deployed equipment. For industrial products, confirm voltage tolerances, temperature limits, ESD requirements, watchdog behavior, and long-term supply status directly from the manufacturer datasheet before releasing the design.
Recommandé
USB-to-Digital Acquisition Interface
The STM32L052K6T6 can serve as the control core in a USB digital acquisition interface when the design needs local sampling orchestration, configuration, and data transfer. The verified USB 2.0 crystal-less feature removes one common USB clock-design decision, while the Cortex-M0+ core handles peripheral configuration and packet preparation. I2C and SPI can connect sensors, converters, or external storage. The compact LQFP package helps keep the acquisition board small, but analog isolation, reference accuracy, sampling timing, input protection, and grounding must be designed separately and verified against the complete datasheet.
Recommandé
Compact Embedded Automation Controller
The STM32L052K6T6 supports compact embedded automation controllers where USB provides configuration access and I2C or SPI provides expansion to sensors and actuators. Its 32 MHz Cortex-M0+ core is suitable for state machines, communication handling, and low-complexity control tasks, and the 32 KB Flash provides a defined firmware budget that should be checked against bootloader and application requirements. The 7x7 mm LQFP footprint supports a modest controller PCB, but production designs must verify all alternate-function pins, GPIO current limits, power sequencing, and peripheral availability. This is a compact MCU platform, not a substitute for a safety-certified controller.
Recommandé
Portable Medical or Sensor Monitoring Module
The STM32L052K6T6 can be used in portable monitoring modules when low-power operation, USB connectivity, and compact serial interfaces are important. The verified STM32L052 family positioning is ultra-low-power, and the MCU includes USB 2.0 crystal-less connectivity, I2C, SPI, and 32 KB Flash. These features support sensor acquisition, local status handling, and USB synchronization in a small assembly. The device is not automatically qualified for medical use; application developers must separately address electrical safety, patient isolation, accuracy, firmware validation, regulatory requirements, and operating-temperature limits.
Recommandé
Battery-Powered IoT Data Logger
The STM32L052K6T6 is a reasonable starting point for battery-powered IoT data loggers because its family is described by STMicroelectronics as ultra-low-power and it combines a 32 MHz Cortex-M0+ core with 32 KB Flash, USB, I2C, and SPI. A typical design can record sensor events locally, configure the unit over USB, and periodically transmit data through an external radio module. The MCU itself does not provide a verified radio interface in the supplied data, so wireless selection remains application-dependent. Battery life should be measured across active, sleep, USB-connected, and wake conditions using the manufacturer’s low-power guidance.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32L052K6T6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32L052K8T6 | STM32L010K8T6TR | STM32L051K6T6 | STM32L062K8T6 | STM32F030K6T6TR |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
Principaux différenciateurs
- Verified USB 2.0 crystal-less connectivity (vs STM32L051K6T6)
- 32 KB Flash resource target (vs STM32L052K8T6)
- Ultra-low-power STM32L0 positioning (vs STM32F030K6T6TR)
- 32 MHz Cortex-M0+ control platform (vs STM32L010K8T6TR)
Notes de conception
Confirm the STM32L052K6T6 supply-voltage range, internal regulator requirements, and decoupling values from the official datasheet before placing the support network. USB-connected designs should budget separately for VBUS detection, protection, and any external regulator because the verified excerpts do not provide those values. Keep the USB return path and MCU ground plane continuous, and validate startup, suspend, and bus-powered behavior rather than relying only on nominal current consumption.
Route the USB differential pair as a controlled impedance structure with a continuous ground reference and avoid crossing noisy switching paths. The verified listing confirms crystal-less USB connectivity, but it does not provide the required trace geometry, series components, or layout values. Use the manufacturer reference layout and validate the complete board with the intended connector, cable, enclosure, power supply, and firmware configuration.
Use the official STM32L052K6 LQFP land pattern and pin numbering rather than inferring the footprint from the 7x7 mm outline. Place decoupling close to the relevant supply pins, preserve access for programming and test, and route I2C and SPI away from USB and switching nodes. Because the supplied data does not include the complete pinout, do not release the PCB until every assigned signal is checked against the manufacturer pin table.
Do not treat a related STM32L0 or STM32F030 MPN as a substitute solely because it uses a similar 32-LQFP outline. Check Flash, SRAM, USB, clock tree, GPIO alternate functions, voltage limits, bootloader behavior, and firmware identification. A hardware replacement can compile but fail at the USB, timing, pin-multiplexing, or low-power stages if only the package dimensions were compared.
Informations de conformité
The supplied excerpts do not explicitly provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Verify these claims on the current STMicroelectronics product documentation or regional compliance declarations.
