STM32L052K6T6 - 32MHz USB Cortex-M0+ MCU | STMicroelectronics
料号： STM32L052K6T6 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $3.5543 | $3.55 |
| 10 | $3.5543 | $35.54 |
| 100 | $3.5543 | $355.43 |
| 500 | $3.5543 | $1,777.15 |
| 1,000 | $3.5543 | $3,554.30 |
STM32L052K6T6 概述
A microcontroller is a semiconductor that integrates a processor core, programmable memory, digital I/O, and peripherals into one device. The STM32L0 family belongs to the ARM Cortex-M microcontroller hierarchy and targets embedded systems where compact size, efficient processing, and low standby or operating power are important. Its peripheral integration reduces the component count needed for communications, timing, analog measurement, and control.
The verified product information identifies an ARM Cortex-M0+ core, 32 MHz operation, 32 KB Flash organized as 32K x 8, USB 2.0 crystal-less connectivity, and a 32-LQFP package. Distributor listings also identify I2C and SPI support, making the device relevant for sensor networks, USB-to-serial equipment, compact control boards, and low-power connected products. The exact SRAM, voltage range, temperature limits, and peripheral ratings were not supplied in the verified excerpts and therefore are not asserted here.
The crystal-less USB feature is a practical differentiator for designs that need USB connectivity without relying on a dedicated external crystal for the specified USB implementation. Firmware must still satisfy the USB clocking, impedance, power, and enumeration requirements described by the manufacturer. The 32 MHz Cortex-M0+ core provides a responsive platform for control logic while retaining the STM32 family's low-power positioning.
Typical applications include low-power IoT nodes, USB-connected sensors, industrial instrumentation, low-power control boards, compact data-acquisition products, and embedded automation modules. These uses benefit from the MCU's combination of USB, I2C, SPI, Flash, and a compact 32-LQFP footprint. The 7x7 mm package is easy to route on a reasonably dense PCB while preserving exposed assembly and inspection access.
Designers should verify the complete pinout, alternate-function mapping, power requirements, decoupling recommendations, clocking scheme, and USB layout against the official STM32L052K6 datasheet before layout release. USB differential routing, ground-return continuity, input filtering, and exposed-pad thermal design are more important than simply matching the package outline. Firmware should also confirm peripheral mapping and low-power-mode timing rather than assuming that a lower-power alternative is automatically interchangeable.
This page combines verified distributor and manufacturer listings with structured application, comparison, and design guidance. It is intended to help engineers identify the correct STM32L052K6T6 platform while separating confirmed data from parameters that still require direct datasheet confirmation.
直接替换替代料： STM32L052K6T6 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： STM32L052K6T6 （相同外形与封装尺寸） ——差异在于 Flash Memory, Maximum CPU Frequency, Mounting Type, Package, Product Type.
快速对比工具——选择替代料号进行并排对比：
STM32L052K8T6
✅ 直接替换📋 参考替代料（不在目录中）
STM32L010K8T6TR
✅ 直接替换📋 参考替代料（不在目录中）
STM32L051K6T6
✅ 直接替换📋 参考替代料（不在目录中）
STM32L062K8T6
✅ 直接替换📋 参考替代料（不在目录中）
STM32F030K6T6TR
✅ 直接替换✓ 有现货
$0.7105 / 个
查看数据手册 →STM32L052K6T6 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Core | ARM Cortex-M0+ |
| USB Connectivity | USB 2.0 crystal-less |
| Serial Interface | I2C |
| Serial Interface | SPI |
| 封装 | 32-LQFP (7x7 mm) |
| Architecture | 32-bit |
| Power Class | Ultra-low-power |
| 安装类型 | Surface-mount LQFP |
STM32L052K6T6 32-lqfp (7x7 mm) 引脚配置指南
STM32L052K6T6（32-lqfp (7x7 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： STM32L052K6T6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32L052K6T6 适用于 6 应用s: USB-Connected Low-Power Sensor Node, Low-Power Industrial Control Module, USB-to-Digital Acquisition Interface, Compact Embedded Automation Controller, Portable Medical or Sensor Monitoring Module, Battery-Powered IoT Data Logger.
USB-Connected Low-Power Sensor Node
The STM32L052K6T6 fits USB-connected sensor nodes because the verified device combines a 32 MHz ARM Cortex-M0+ core, 32 KB Flash, USB 2.0 crystal-less connectivity, I2C, and SPI. It can supervise a sensor, format local data, and expose configuration or telemetry through USB while keeping the design compact. I2C is useful for short-distance digital sensors, while SPI can support higher-throughput devices. The 7x7 mm LQFP also leaves room for connectors and passive components on a small board. Verify USB power, differential routing, firmware support, and current-consumption behavior in the official documentation.
推荐
Low-Power Industrial Control Module
The STM32L052K6T6 is suitable for compact industrial control modules where the MCU must coordinate sensors, actuators, and communications without a large processing footprint. Its verified 32 MHz Cortex-M0+ performance and 32 KB Flash provide a platform for deterministic control firmware, while I2C and SPI support common embedded buses. The crystal-less USB feature can simplify configuration and service connections in deployed equipment. For industrial products, confirm voltage tolerances, temperature limits, ESD requirements, watchdog behavior, and long-term supply status directly from the manufacturer datasheet before releasing the design.
推荐
USB-to-Digital Acquisition Interface
The STM32L052K6T6 can serve as the control core in a USB digital acquisition interface when the design needs local sampling orchestration, configuration, and data transfer. The verified USB 2.0 crystal-less feature removes one common USB clock-design decision, while the Cortex-M0+ core handles peripheral configuration and packet preparation. I2C and SPI can connect sensors, converters, or external storage. The compact LQFP package helps keep the acquisition board small, but analog isolation, reference accuracy, sampling timing, input protection, and grounding must be designed separately and verified against the complete datasheet.
推荐
Compact Embedded Automation Controller
The STM32L052K6T6 supports compact embedded automation controllers where USB provides configuration access and I2C or SPI provides expansion to sensors and actuators. Its 32 MHz Cortex-M0+ core is suitable for state machines, communication handling, and low-complexity control tasks, and the 32 KB Flash provides a defined firmware budget that should be checked against bootloader and application requirements. The 7x7 mm LQFP footprint supports a modest controller PCB, but production designs must verify all alternate-function pins, GPIO current limits, power sequencing, and peripheral availability. This is a compact MCU platform, not a substitute for a safety-certified controller.
推荐
Portable Medical or Sensor Monitoring Module
The STM32L052K6T6 can be used in portable monitoring modules when low-power operation, USB connectivity, and compact serial interfaces are important. The verified STM32L052 family positioning is ultra-low-power, and the MCU includes USB 2.0 crystal-less connectivity, I2C, SPI, and 32 KB Flash. These features support sensor acquisition, local status handling, and USB synchronization in a small assembly. The device is not automatically qualified for medical use; application developers must separately address electrical safety, patient isolation, accuracy, firmware validation, regulatory requirements, and operating-temperature limits.
推荐
Battery-Powered IoT Data Logger
The STM32L052K6T6 is a reasonable starting point for battery-powered IoT data loggers because its family is described by STMicroelectronics as ultra-low-power and it combines a 32 MHz Cortex-M0+ core with 32 KB Flash, USB, I2C, and SPI. A typical design can record sensor events locally, configure the unit over USB, and periodically transmit data through an external radio module. The MCU itself does not provide a verified radio interface in the supplied data, so wireless selection remains application-dependent. Battery life should be measured across active, sleep, USB-connected, and wake conditions using the manufacturer’s low-power guidance.
推荐
推荐产品汇总
工程参考数据： STM32L052K6T6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | STM32L052K8T6 | STM32L010K8T6TR | STM32L051K6T6 | STM32L062K8T6 | STM32F030K6T6TR |
|---|---|---|---|---|---|---|
| Package | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) | 32-LQFP (7x7 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
关键差异点
- Verified USB 2.0 crystal-less connectivity （对比 STM32L051K6T6)
- 32 KB Flash resource target （对比 STM32L052K8T6)
- Ultra-low-power STM32L0 positioning （对比 STM32F030K6T6TR)
- 32 MHz Cortex-M0+ control platform （对比 STM32L010K8T6TR)
设计说明
Confirm the STM32L052K6T6 supply-voltage range, internal regulator requirements, and decoupling values from the official datasheet before placing the support network. USB-connected designs should budget separately for VBUS detection, protection, and any external regulator because the verified excerpts do not provide those values. Keep the USB return path and MCU ground plane continuous, and validate startup, suspend, and bus-powered behavior rather than relying only on nominal current consumption.
Route the USB differential pair as a controlled impedance structure with a continuous ground reference and avoid crossing noisy switching paths. The verified listing confirms crystal-less USB connectivity, but it does not provide the required trace geometry, series components, or layout values. Use the manufacturer reference layout and validate the complete board with the intended connector, cable, enclosure, power supply, and firmware configuration.
Use the official STM32L052K6 LQFP land pattern and pin numbering rather than inferring the footprint from the 7x7 mm outline. Place decoupling close to the relevant supply pins, preserve access for programming and test, and route I2C and SPI away from USB and switching nodes. Because the supplied data does not include the complete pinout, do not release the PCB until every assigned signal is checked against the manufacturer pin table.
Do not treat a related STM32L0 or STM32F030 MPN as a substitute solely because it uses a similar 32-LQFP outline. Check Flash, SRAM, USB, clock tree, GPIO alternate functions, voltage limits, bootloader behavior, and firmware identification. A hardware replacement can compile but fail at the USB, timing, pin-multiplexing, or low-power stages if only the package dimensions were compared.
合规信息
The supplied excerpts do not explicitly provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Verify these claims on the current STMicroelectronics product documentation or regional compliance declarations.
