STMicroelectronics

STM32L063R8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics

Référence : STM32L063R8T6 ✓ Actif
2.5 V to 3.3 V Vdss 64-pin LQFP (10 x 10 mm) Package 32 MHz Speed 64 KB (64K x 8 bits) Memory
MOQ : 1 |

STM32L063R8T6 Présentation

The STMicroelectronics STM32L063R8T6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 32 MHz and integrating 64 KB of Flash memory. The device is supplied in a 64-pin LQFP package measuring 10 x 10 mm and supports operation from 2.5 V to 3.3 V. Its connectivity features include USB 2.0 crystal-less operation, LCD support, and AES hardware acceleration.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile memory, peripherals, and communication interfaces into one package. The STM32L0 family belongs to the 32-bit embedded MCU hierarchy, combining ARM Cortex-M0+ processing with energy-conscious operation for compact, battery-powered equipment. The STM32L063R8T6 is particularly suited to designs that require USB connectivity, secure data handling, and a relatively large pin count in a familiar LQFP footprint.

Key characteristics include a 32-bit Cortex-M0+ processor, a maximum clock frequency of 32 MHz, and 64 KB of Flash organized as 64K x 8 bits. USB 2.0 support includes crystal-less operation, which can simplify clock and peripheral design in USB-connected products. The integrated AES capability supports hardware-assisted encryption, while the LCD interface enables direct control of compatible display panels. The operating voltage range of 2.5 V to 3.3 V suits embedded systems designed around standard low-voltage rails.

The STM32L063R8T6 combines a compact 10 x 10 mm LQFP package with a broad set of embedded peripherals. Its 64-pin package provides more I/O and mixed-signal connection options than smaller MCU packages, making it useful for products that need USB alongside control signals, communications, sensor inputs, or display support. The Cortex-M0+ architecture is designed for energy-efficient embedded processing rather than high-performance computing, allowing developers to balance responsive control with low standby and active power.

Typical uses include low-power USB-connected data loggers, compact industrial sensing modules, secure access-control terminals, USB-to-serial equipment, battery-operated monitoring devices, and embedded control systems with LCD readouts. The USB interface is particularly valuable for configuration, firmware update, or data-transfer workflows. AES hardware acceleration can improve the efficiency of encrypted communication or storage routines, while the LCD controller reduces the need for external display-interface components.

PCB design should account for the LQFP-64 footprint, exposed supply pins, decoupling requirements, and USB signal integrity. Place the USB differential pair as a controlled-impedance route with minimal stubs, provide local bulk and high-frequency decoupling near the device, and verify oscillator, reset, and programming interfaces against the manufacturer datasheet. The 10 x 10 mm package also requires adequate assembly clearance and thermal copper for repeatable production soldering.

This product page combines manufacturer product information, distributor listings, application guidance, package identification, and engineering-oriented selection criteria. It also separates verified device characteristics from fields that require consultation of the manufacturer datasheet, helping designers evaluate the STM32L063R8T6 for USB, low-power, embedded-control, and security-assisted applications.

Alternatives de remplacement direct pour STM32L063R8T6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

STM32L063R8T6 Valeurs maximales et caractéristiques électriques

Product Type 32-bit ultra-low-power microcontroller
Processor Core ARM Cortex-M0+
Maximum CPU Frequency 32 MHz
Architecture 32-bit RISC
Flash Memory 64 KB (64K x 8 bits)
Operating Voltage 2.5 V to 3.3 V
USB Interface USB 2.0 with crystal-less operation
LCD Support Yes
AES Support Yes, hardware AES
Boîtier 64-pin LQFP (10 x 10 mm)
Type de montage Surface mount
Device Family STM32L0
Product Series STM32L063
Core Variant STM32L063x8
Power Class Ultra-low-power

Guide de configuration des broches du STM32L063R8T6 64-pin lqfp (10 x 10 mm)

Configuration des broches du STM32L063R8T6 (boîtier 64-pin lqfp (10 x 10 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 64-pin lqfp (10 x 10 mm) pour le STM32L063R8T6

Aucune donnée de brochage détaillée disponible pour STM32L063R8T6.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

STM32L063R8T6 convient pour 6 applications: USB Data Loggers, Industrial Sensor Nodes, Secure Access-Control Terminals, Battery-Powered Monitoring Devices, LCD-Equipped Control Panels, USB-to-Serial Control Modules.

🔌

USB Data Loggers

The STM32L063R8T6 fits USB-connected data loggers that periodically transfer measurements to a host computer. Its USB 2.0 crystal-less capability can reduce external clock requirements, while the 32 MHz Cortex-M0+ core handles sampling, local buffering, and control tasks. The 64 KB of Flash supports firmware, configuration tables, and update routines. Designers should preserve the USB differential impedance path, provide compliant supply decoupling, and verify enumeration behavior in the intended host environment.

🏭

Industrial Sensor Nodes

The STM32L063R8T6 is appropriate for compact industrial sensor nodes requiring a mix of digital inputs, communications, and local processing. Its 64-pin LQFP provides more interface options than smaller microcontroller packages, while the ultra-low-power STM32L0 positioning supports energy-conscious designs. The 2.5 V to 3.3 V operating range fits common embedded rails. Engineers should allocate pins according to the alternate-function tables and confirm isolation, protection, and grounding requirements at the system level.

🔐

Secure Access-Control Terminals

The STM32L063R8T6 can support access-control terminals that read credentials, drive a display, and communicate with a host or controller. AES hardware acceleration provides a dedicated mechanism for cryptographic operations, and the LCD capability reduces the need for a separate display controller. The 32-bit Cortex-M0+ core supports responsive protocol handling. Designers should review the exact cryptographic feature set in the manufacturer datasheet and implement key storage and update procedures appropriate to the product.

🔋

Battery-Powered Monitoring Devices

The STM32L063R8T6 is suitable for battery-powered environmental or equipment monitoring devices where low-power operation and a rich pin count are important. The ultra-low-power STM32L0 architecture can use sleep and low-power operating states between measurements, while the Cortex-M0+ core handles sensor polling, timestamping, and local state. The 2.5 V to 3.3 V range supports common regulated rails. Power-budget calculations should include sensor, regulator, communications, and indicator loads rather than the MCU alone.

🖥️

LCD-Equipped Control Panels

The STM32L063R8T6 fits compact control panels that need a local graphical or segmented display, operator input, and embedded logic. Its LCD support can reduce the component count compared with a separate display controller, while the 64-pin LQFP leaves room for buttons, indicators, communications, and analog or digital sensor inputs. The 32 MHz core provides sufficient control bandwidth for typical human-machine interfaces. Panel voltage, timing, and segment or pixel requirements must match the device's documented LCD capabilities.

🔧

USB-to-Serial Control Modules

The STM32L063R8T6 can serve as the controller in USB-to-serial and USB-to-embedded-interface modules. USB 2.0 crystal-less operation supports direct host connectivity, while the 64-pin package provides enough pins for multiple UART, status, and configuration signals. The Cortex-M0+ core can bridge data, implement a command protocol, or perform firmware updates. Designers should account for USB suspend behavior, available I/O remapping, ESD protection, and the electrical requirements of the external serial interface.

What is the STM32L063R8T6?
The STM32L063R8T6 is an ultra-low-power, 32-bit STMicroelectronics microcontroller based on the ARM Cortex-M0+ core. It operates at up to 32 MHz, contains 64 KB of Flash memory, and is packaged in a 64-pin LQFP measuring 10 x 10 mm. According to the STMicroelectronics STM32L063R8 product page, the STM32L063x8 family also supports USB 2.0 crystal-less operation, LCD control, and AES hardware acceleration.
What are the key specifications of STM32L063R8T6 that engineers should know?
The principal STM32L063R8T6 specifications are a 32 MHz ARM Cortex-M0+ core, 64 KB of Flash, a 2.5 V to 3.3 V operating range, and a 64-pin LQFP package. The device also provides USB 2.0 crystal-less operation, LCD support, and AES acceleration. STMicroelectronics identifies the product as part of the ultra-low-power STM32L0 series and the STM32L063x8 device family in its official product documentation.
What is the operating voltage of STM32L063R8T6?
The STM32L063R8T6 operates from 2.5 V to 3.3 V. This range allows use with standard low-voltage embedded rails while supporting USB, LCD, and security-assisted functions. The STMicroelectronics STM32L063R8 product page identifies the supported supply range, while the manufacturer datasheet should be consulted for individual power pins, decoupling, voltage tolerances, and startup sequencing requirements.
How much Flash memory does STM32L063R8T6 contain?
The STM32L063R8T6 contains 64 KB of Flash memory, organized as 64K x 8 bits. This storage is suitable for boot code, application firmware, configuration data, and firmware update routines. The Flash capacity is confirmed by the official STMicroelectronics product page and distributor technical listings. RAM and EEPROM capacities should be confirmed from the device datasheet and memory map before sizing an application.
Does STM32L063R8T6 support USB and LCD?
Yes. The STM32L063R8T6 supports USB 2.0 with crystal-less operation and includes LCD capability. STMicroelectronics identifies these functions as part of the STM32L063x8 family, allowing USB-enabled devices and display-equipped products to be built around the same microcontroller. USB route layout, display electrical requirements, and supported panel interfaces should follow the relevant manufacturer application guidance.
What is the best drop-in replacement for STM32L063R8T6?
No independently verified cross-manufacturer drop-in replacement was established for the STM32L063R8T6. A true drop-in candidate must retain the 64-pin LQFP footprint, pin assignment, 2.5 V to 3.3 V supply range, 32 MHz performance, and essential USB, LCD, and AES functions. Generic Cortex-M0+ alternatives may fit some applications but still require pin, peripheral, firmware, and qualification review before being treated as drop-in replacements.
Can another STM32L063 part replace STM32L063R8T6 without PCB changes?
Only a variant with the same 64-pin LQFP footprint, pinout, voltage range, memory configuration, and required peripherals should be considered a drop-in replacement. The packaging-only STM32L063R8T6TR order code has the same device functionality but a different delivery format, while parts using smaller LQFP packages cannot replace the STM32L063R8T6 on the existing PCB. Confirm the exact orderable MPN and footprint before substituting.
STM32L063R8T6 vs STM32L063C8T6 - which is better?
STM32L063R8T6 is the 64-pin LQFP option, while STM32L063C8T6 uses a 48-pin LQFP package. The R8T6 device therefore offers more available pins and a larger package footprint, making it preferable when the design needs additional I/O or exposed mixed-signal functions. The C8T6 cannot replace the R8T6 without changing the PCB because their pin counts and physical footprints differ.
When should I choose STM32L063R8T6 over a smaller STM32L0 microcontroller?
Choose the STM32L063R8T6 when a design needs its 64-pin LQFP interface, USB 2.0 crystal-less operation, LCD support, and AES acceleration within a 10 x 10 mm footprint. A smaller STM32L0 package may be preferable for cost, board area, or simple control tasks, but it can reduce available I/O and eliminate required peripherals. Select by function, pin count, memory, power profile, and mechanical constraints.
Is STM32L063R8T6 suitable for a USB-connected low-power sensor node?
The STM32L063R8T6 is suitable for a USB-connected low-power sensor node because it combines a 32 MHz Cortex-M0+ core with USB 2.0 crystal-less operation and a 2.5 V to 3.3 V supply range. The 64-pin package provides more connection options than compact 32-pin devices. Use the low-power modes carefully, verify USB clock requirements, and confirm that the sensor interface fits the available pins.
How do I design the PCB around the STM32L063R8T6 LQFP-64 package?
Design the PCB for the exact 64-pin LQFP footprint and place local decoupling close to each supply group according to the manufacturer datasheet. Route the USB differential pair as a controlled-impedance pair with minimal vias and stubs, preserve the USB reference-plane path, and provide clean ground returns. Also account for programming access, reset behavior, crystal-less USB constraints, and assembly clearance around the 10 x 10 mm package.
Where can I download the STM32L063R8T6 datasheet?
The official STM32L063R8T6 technical information is available from the STMicroelectronics STM32L063R8 product page at https://www.st.com/en/microcontrollers-microprocessors/stm32l063r8.html. Open the product documentation section to locate the current manufacturer datasheet and associated reference material. Use the manufacturer document for complete pin descriptions, electrical limits, memory mapping, timing, and package drawings rather than distributor summaries.
Where can I find the STM32L063R8T6 pinout?
The STM32L063R8T6 pinout is published in the manufacturer datasheet and package information for the 64-pin LQFP package. Begin with the pin-description table and alternate-function tables, then verify each net against the selected package symbol in the PCB library. The online product page provides the entry point to official documentation; use the package drawing to confirm pin numbering and the 10 x 10 mm body dimensions.
Where to buy STM32L063R8T6 online?
Use the Request a Quote form on this XAIPART product page to request STM32L063R8T6 availability, commercial terms, and current lead time. The form is the appropriate route for an order-on-request electronic component and avoids reliance on potentially stale catalog availability. Specify the required quantity, package, tray or reel preference, and target delivery schedule with the request.
What is the price and lead time for STM32L063R8T6?
Submit an STM32L063R8T6 request through the Request a Quote form on this page to obtain the current price, minimum order quantity, stock position, and lead time. The target is a standard 64-pin LQFP device with 64 KB of Flash and USB, LCD, and AES features, but commercial terms can change with quantity, delivery format, and market conditions.

Données de référence d'ingénierie pour STM32L063R8T6 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the STM32L063R8T6 when a design needs the combination of a 32 MHz ARM Cortex-M0+ core, 64 KB of Flash, USB 2.0 crystal-less operation, LCD support, AES acceleration, and a 64-pin LQFP footprint. It is a strong fit for USB-connected loggers, industrial sensor nodes, secure terminals, and compact control panels that require more I/O than smaller packages provide. A smaller STM32L0 MCU may be preferable when the application does not need USB, display support, or the additional pins. The STM32L063C8T6 and STM32L063C8U6 are not drop-in choices because their package configurations differ from the 64-pin LQFP target. Verify memory requirements, peripheral availability, clocking, firmware support, qualification, and long-term availability before selecting a final substitute.

Notes de conception

Route the USB differential pair as a controlled-impedance path with closely matched length, continuous reference plane, and minimal vias or stubs. The crystal-less USB feature does not remove the need for careful signal integrity; impedance discontinuities and shared return-current paths can still degrade signal quality. Keep the connector, protection devices, and controller-side test points arranged so that each functional block has a short, repeatable current path.

Use the manufacturer pin-description table and package drawing to build the LQFP-64 footprint, then cross-check pin 1, pad numbering, courtyard, solder-mask clearance, and paste apertures. Keep programming-test pads accessible without creating long signal stubs on sensitive nets. For a 10 x 10 mm LQFP, verify the assembler's handling of lead pitch and package coplanarity because those process factors directly affect solder-joint reliability.

Place the required bulk and high-frequency decoupling capacitors close to their associated supply pins, with short ground returns and the ground reference plane kept continuous beneath the device. Review every power pin, including analog and digital supply connections, against the manufacturer datasheet. Estimated power dissipation cannot be selected from the MCU frequency alone; calculate the complete system load and regulator efficiency before choosing the supply capacity and thermal margin.

Do not treat a similar STM32L0 MPN as interchangeable merely because its core and memory are similar. Package pin count, exposed-pin connections, USB clock requirements, peripheral availability, and boot behavior can differ. In particular, the 48-pin STM32L063C8T6 and 64-pin STM32L063R8T6 are not PCB drop-in equivalents. Verify the exact orderable MPN, package drawing, pin table, and application configuration before releasing a replacement.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The available product and distributor information does not state the required compliance status. Use the current manufacturer product documentation and declarations for qualification and environmental compliance decisions.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

STM32L063R8T6 datasheet STM32L063R8T6 specifications STM32L063R8T6 pinout STM32L063R8T6 datasheet pdf STM32L063R8T6 equivalent STM32L063R8T6 replacement STM32L063R8T6 footprint STM32L063R8T6 LQFP-64 STM32L063R8T6 USB crystal-less STM32L063R8T6 vs STM32L063C8T6 STMicroelectronics STM32L063R8T6 STM32L063R8T6 price

Composants & termes associés

STMicroelectronics STM32L063R8T6 STM32L063R8 STM32L063x8 STM32L0 ARM Cortex-M0+ 32-bit microcontroller embedded microcontroller semiconductor 64 KB Flash memory 32 MHz USB 2.0 crystal-less USB LCD controller AES hardware accelerator LQFP-64 10 x 10 mm package surface-mount package 2.5 V to 3.3 V ultra-low-power USB data logger industrial sensor node access-control terminal battery-powered monitor
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ