STM32L063R8T6 - 32MHz Cortex-M0+ 64KB MCU | STMicroelectronics
MPN: STM32L063R8T6 ✓ NakahandaSTM32L063R8T6 Ulas
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile memory, peripherals, and communication interfaces into one package. The STM32L0 family belongs to the 32-bit embedded MCU hierarchy, combining ARM Cortex-M0+ processing with energy-conscious operation for compact, battery-powered equipment. The STM32L063R8T6 is particularly suited to designs that require USB connectivity, secure data handling, and a relatively large pin count in a familiar LQFP footprint.
Key characteristics include a 32-bit Cortex-M0+ processor, a maximum clock frequency of 32 MHz, and 64 KB of Flash organized as 64K x 8 bits. USB 2.0 support includes crystal-less operation, which can simplify clock and peripheral design in USB-connected products. The integrated AES capability supports hardware-assisted encryption, while the LCD interface enables direct control of compatible display panels. The operating voltage range of 2.5 V to 3.3 V suits embedded systems designed around standard low-voltage rails.
The STM32L063R8T6 combines a compact 10 x 10 mm LQFP package with a broad set of embedded peripherals. Its 64-pin package provides more I/O and mixed-signal connection options than smaller MCU packages, making it useful for products that need USB alongside control signals, communications, sensor inputs, or display support. The Cortex-M0+ architecture is designed for energy-efficient embedded processing rather than high-performance computing, allowing developers to balance responsive control with low standby and active power.
Typical uses include low-power USB-connected data loggers, compact industrial sensing modules, secure access-control terminals, USB-to-serial equipment, battery-operated monitoring devices, and embedded control systems with LCD readouts. The USB interface is particularly valuable for configuration, firmware update, or data-transfer workflows. AES hardware acceleration can improve the efficiency of encrypted communication or storage routines, while the LCD controller reduces the need for external display-interface components.
PCB design should account for the LQFP-64 footprint, exposed supply pins, decoupling requirements, and USB signal integrity. Place the USB differential pair as a controlled-impedance route with minimal stubs, provide local bulk and high-frequency decoupling near the device, and verify oscillator, reset, and programming interfaces against the manufacturer datasheet. The 10 x 10 mm package also requires adequate assembly clearance and thermal copper for repeatable production soldering.
This product page combines manufacturer product information, distributor listings, application guidance, package identification, and engineering-oriented selection criteria. It also separates verified device characteristics from fields that require consultation of the manufacturer datasheet, helping designers evaluate the STM32L063R8T6 for USB, low-power, embedded-control, and security-assisted applications.
Mga alternatibo na pwedeng ilagay na STM32L063R8T6 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboSTM32L063R8T6 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 64 KB (64K x 8 bits) |
| Operating Voltage | 2.5 V to 3.3 V |
| USB Interface | USB 2.0 with crystal-less operation |
| LCD Support | Yes |
| AES Support | Yes, hardware AES |
| Packhaging | 64-pin LQFP (10 x 10 mm) |
| Uri ng Pagpapasok | Surface mount |
| Device Family | STM32L0 |
| Product Series | STM32L063 |
| Core Variant | STM32L063x8 |
| Power Class | Ultra-low-power |
Gabay sa Pin Configuration ng STM32L063R8T6 64-pin lqfp (10 x 10 mm)
Pin configuration para sa STM32L063R8T6 (64-pin lqfp (10 x 10 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa STM32L063R8T6.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
STM32L063R8T6 ay nararapat para sa 6 aplikasyons: USB Data Loggers, Industrial Sensor Nodes, Secure Access-Control Terminals, Battery-Powered Monitoring Devices, LCD-Equipped Control Panels, USB-to-Serial Control Modules.
USB Data Loggers
The STM32L063R8T6 fits USB-connected data loggers that periodically transfer measurements to a host computer. Its USB 2.0 crystal-less capability can reduce external clock requirements, while the 32 MHz Cortex-M0+ core handles sampling, local buffering, and control tasks. The 64 KB of Flash supports firmware, configuration tables, and update routines. Designers should preserve the USB differential impedance path, provide compliant supply decoupling, and verify enumeration behavior in the intended host environment.
Industrial Sensor Nodes
The STM32L063R8T6 is appropriate for compact industrial sensor nodes requiring a mix of digital inputs, communications, and local processing. Its 64-pin LQFP provides more interface options than smaller microcontroller packages, while the ultra-low-power STM32L0 positioning supports energy-conscious designs. The 2.5 V to 3.3 V operating range fits common embedded rails. Engineers should allocate pins according to the alternate-function tables and confirm isolation, protection, and grounding requirements at the system level.
Secure Access-Control Terminals
The STM32L063R8T6 can support access-control terminals that read credentials, drive a display, and communicate with a host or controller. AES hardware acceleration provides a dedicated mechanism for cryptographic operations, and the LCD capability reduces the need for a separate display controller. The 32-bit Cortex-M0+ core supports responsive protocol handling. Designers should review the exact cryptographic feature set in the manufacturer datasheet and implement key storage and update procedures appropriate to the product.
Battery-Powered Monitoring Devices
The STM32L063R8T6 is suitable for battery-powered environmental or equipment monitoring devices where low-power operation and a rich pin count are important. The ultra-low-power STM32L0 architecture can use sleep and low-power operating states between measurements, while the Cortex-M0+ core handles sensor polling, timestamping, and local state. The 2.5 V to 3.3 V range supports common regulated rails. Power-budget calculations should include sensor, regulator, communications, and indicator loads rather than the MCU alone.
LCD-Equipped Control Panels
The STM32L063R8T6 fits compact control panels that need a local graphical or segmented display, operator input, and embedded logic. Its LCD support can reduce the component count compared with a separate display controller, while the 64-pin LQFP leaves room for buttons, indicators, communications, and analog or digital sensor inputs. The 32 MHz core provides sufficient control bandwidth for typical human-machine interfaces. Panel voltage, timing, and segment or pixel requirements must match the device's documented LCD capabilities.
USB-to-Serial Control Modules
The STM32L063R8T6 can serve as the controller in USB-to-serial and USB-to-embedded-interface modules. USB 2.0 crystal-less operation supports direct host connectivity, while the 64-pin package provides enough pins for multiple UART, status, and configuration signals. The Cortex-M0+ core can bridge data, implement a command protocol, or perform firmware updates. Designers should account for USB suspend behavior, available I/O remapping, ESD protection, and the electrical requirements of the external serial interface.
Impormasyon ng Talumpati sa Engineering for STM32L063R8T6 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Talaan ng Disenyo
Route the USB differential pair as a controlled-impedance path with closely matched length, continuous reference plane, and minimal vias or stubs. The crystal-less USB feature does not remove the need for careful signal integrity; impedance discontinuities and shared return-current paths can still degrade signal quality. Keep the connector, protection devices, and controller-side test points arranged so that each functional block has a short, repeatable current path.
Use the manufacturer pin-description table and package drawing to build the LQFP-64 footprint, then cross-check pin 1, pad numbering, courtyard, solder-mask clearance, and paste apertures. Keep programming-test pads accessible without creating long signal stubs on sensitive nets. For a 10 x 10 mm LQFP, verify the assembler's handling of lead pitch and package coplanarity because those process factors directly affect solder-joint reliability.
Place the required bulk and high-frequency decoupling capacitors close to their associated supply pins, with short ground returns and the ground reference plane kept continuous beneath the device. Review every power pin, including analog and digital supply connections, against the manufacturer datasheet. Estimated power dissipation cannot be selected from the MCU frequency alone; calculate the complete system load and regulator efficiency before choosing the supply capacity and thermal margin.
Do not treat a similar STM32L0 MPN as interchangeable merely because its core and memory are similar. Package pin count, exposed-pin connections, USB clock requirements, peripheral availability, and boot behavior can differ. In particular, the 48-pin STM32L063C8T6 and 64-pin STM32L063R8T6 are not PCB drop-in equivalents. Verify the exact orderable MPN, package drawing, pin table, and application configuration before releasing a replacement.
Impormasyon ng Pagsunod sa Kautusan
The available product and distributor information does not state the required compliance status. Use the current manufacturer product documentation and declarations for qualification and environmental compliance decisions.