STMicroelectronics

STM32L073CZU6 - 32MHz Cortex-M0+ 192KB MCU | STMicroelectronics

Référence : STM32L073CZU6 ✓ Actif
1.65 V to 3.6 V Vdss 48-pin UFQFPN, 7 x 7 mm Package 32 MHz Speed 192 KB Memory
MOQ : 1 |

STM32L073CZU6 Présentation

The STMicroelectronics STM32L073CZU6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz CPU, 192 KB of Flash memory, 20 KB of SRAM, and 6 KB of EEPROM in a 48-pin UFQFPN package measuring 7 x 7 mm. It operates from 1.65 V to 3.6 V and integrates USB 2.0 crystal-less connectivity and LCD controller support.

An ultra-low-power microcontroller is an energy-efficient embedded processing device designed to operate from a restricted power budget while providing real-time control, communications, and data acquisition. The STM32L0 family belongs to the Arm Cortex-M0+ microcontroller hierarchy, combining a compact 32-bit processor with peripherals and low-power modes for battery-powered and always-connected equipment.

The STM32L073CZU6 provides 192 KB of Flash for firmware and 20 KB of SRAM for working data, while its 6 KB of EEPROM supports nonvolatile parameter storage. Its 32 MHz Cortex-M0+ core balances processing capability with low power consumption. USB 2.0 crystal-less operation reduces external clock requirements, while the integrated LCD controller enables direct control of compatible segment or graphical displays.

The 1.65 V to 3.6 V supply range supports low-voltage embedded systems. A 48-pin UFQFPN package with an exposed pad provides a compact surface-mount footprint and a thermal connection to the PCB. This combination is useful when a design requires more peripheral connectivity and memory than a smaller STM32L0 package provides without moving to a higher-performance Cortex-M3 or Cortex-M4 architecture.

Typical uses include USB-connected portable instruments, low-power industrial data loggers, battery-powered medical peripherals, compact human-machine interfaces, environmental sensors, and USB-to-serial or USB-to-control adapters. The USB and LCD capabilities are particularly valuable where external USB transceivers or dedicated display controllers would otherwise increase board area.

PCB design should follow the manufacturer pin-definition and land-pattern guidance exactly, including the exposed-pad connection and all supply pins. Place decoupling capacitors close to the appropriate VDD pins, route USB data as a controlled 90-ohm differential pair, and connect the exposed pad to the ground plane. Firmware should also enable clock, USB, and peripheral settings only when needed to maximize low-power performance.

This page combines the manufacturer product information with application-oriented design guidance, drop-in same-family alternatives, and a parameter comparison. It helps engineers distinguish the STM32L073CZU6 from lower-memory, higher-memory, LCD, and security-oriented members of the STM32L0 family before committing the device to a PCB design.

Alternatives de remplacement direct pour STM32L073CZU6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

STM32L072CZU6

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 48-pin UFQFPN, 7 x 7 mm
Flash is 192 KB on both devices; the STM32L072 differs in LCD and peripheral feature configuration, requiring 10% proximity for the non-identical feature set

📋 Alternative de référence (hors catalogue)

STM32L073CBU6

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 48-pin UFQFPN, 7 x 7 mm
Flash is 128 KB versus 192 KB, a 64 KB or 33% reduction, while the package and Cortex-M0+ architecture remain aligned

📋 Alternative de référence (hors catalogue)

STM32L073CCU6

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 48-pin UFQFPN, 7 x 7 mm
Flash is 256 KB versus 192 KB, a 64 KB or 33% increase, while the package and Cortex-M0+ architecture remain aligned

📋 Alternative de référence (hors catalogue)

STM32L081CZU6

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 48-pin UFQFPN, 7 x 7 mm
Flash remains 192 KB and the CPU remains Cortex-M0+ at 32 MHz, while the STM32L081 adds hardware-security functionality

📋 Alternative de référence (hors catalogue)

STM32L083CZU6

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 48-pin UFQFPN, 7 x 7 mm
Flash remains 192 KB and the CPU remains Cortex-M0+ at 32 MHz, while the STM32L083 adds hardware-security functionality

📋 Alternative de référence (hors catalogue)

STM32L073CZU6 Valeurs maximales et caractéristiques électriques

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M0+
CPU Architecture 32-bit single-core
Maximum CPU Frequency 32 MHz
Flash Memory 192 KB
Flash Organization 192K x 8 bits
SRAM 20 KB
EEPROM 6 KB
Tension d'alimentation de fonctionnement 1.65 V to 3.6 V
USB Interface USB 2.0 crystal-less
Display Support Integrated LCD controller
GPIO Count 37 I/O ports
Boîtier 48-pin UFQFPN, 7 x 7 mm
Type de montage Surface mount
Statut RoHS RoHS compliant

Guide de configuration des broches du STM32L073CZU6 48-pin ufqfpn, 7 x 7 mm

Configuration des broches du STM32L073CZU6 (boîtier 48-pin ufqfpn, 7 x 7 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 48-pin ufqfpn, 7 x 7 mm pour le STM32L073CZU6

Aucune donnée de brochage détaillée disponible pour STM32L073CZU6.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

STM32L073CZU6 convient pour 6 applications: USB-connected industrial sensor node, Battery-powered environmental monitor, Compact medical data-acquisition device, USB-to-control and configuration adapter, Low-power human-machine interface, Portable test and measurement instrument.

🏭

USB-connected industrial sensor node

The STM32L073CZU6 fits an industrial sensor node that must collect measurements and expose them through a USB interface without adding a separate communications processor. Its 32 MHz Arm Cortex-M0+ core provides control capability, while 192 KB of Flash accommodates drivers, protocol handling, and application logic. The 20 KB of SRAM supports buffering and the 6 KB of EEPROM can retain calibration data. Its 1.65 V to 3.6 V operating range simplifies integration with low-voltage sensor circuits. Crystal-less USB support can also reduce clock-component count, although USB signal routing, power budgeting, and industrial temperature requirements still need verification.

🧩

Battery-powered environmental monitor

The STM32L073CZU6 is appropriate for a battery-powered environmental monitor because its ultra-low-power STM32L0 architecture combines a 32 MHz Cortex-M0+ core with a 1.65 V to 3.6 V supply range. The MCU can supervise humidity, temperature, and gas sensors, store configuration in its 6 KB EEPROM, and use the 20 KB SRAM for active measurements. Run the core and unused peripherals between sampling intervals to reduce energy use. The 192 KB Flash capacity is useful for calibration tables and local logging logic, while the 48-pin UFQFPN package leaves sufficient I/O for sensors, indicators, and a low-power display.

💊

Compact medical data-acquisition device

The STM32L073CZU6 can serve as the control MCU in a compact medical data-acquisition device that combines sensing, local storage, and USB connectivity. Its 192 KB of Flash supports protocol and control firmware, while 20 KB of SRAM handles buffered samples and 6 KB of EEPROM preserves device configuration. The 48-pin UFQFPN package reduces board footprint, and the 1.65 V to 3.6 V range supports low-voltage system rails. USB 2.0 crystal-less connectivity is useful for a simplified host interface. Medical designs still require appropriate isolation, protection, validation, and regulatory controls; the MCU qualification alone does not establish compliance for the finished instrument.

🔧

USB-to-control and configuration adapter

The STM32L073CZU6 is a practical MCU for a USB-to-control adapter because it integrates a 32 MHz Cortex-M0+ processor, USB 2.0 crystal-less connectivity, and enough memory for configuration and command handling. Firmware can expose relays, GPIO, instrumentation, or programmable controls to a computer without requiring a separate USB controller. The 37 I/O ports provide more interface options than smaller packages, while 192 KB of Flash allows device-specific command sets and USB descriptors to be stored on-chip. Use a supported USB connector protection arrangement, maintain controlled impedance routing, and verify the selected USB power source against the device’s complete load current.

📺

Low-power human-machine interface

The STM32L073CZU6 supports a compact human-machine interface because its LCD controller can drive a compatible display while the Cortex-M0+ core processes keypad, status, and configuration functions. The 48-pin package provides 37 I/O ports, leaving control signals for buttons, indicators, and interface peripherals while the LCD signals occupy dedicated resources. With 192 KB of Flash and 20 KB of SRAM, the MCU can host menu logic, graphics control, and communication firmware without an external display controller. The 1.65 V to 3.6 V supply range helps simplify shared-rail designs. Confirm the selected display’s electrical interface, timing requirements, and pin assignment before committing the board layout.

🖥️

Portable test and measurement instrument

The STM32L073CZU6 can serve as the control and communications MCU in a portable test instrument. Its 32 MHz Cortex-M0+ core handles measurement sequencing and user interaction, while 192 KB of Flash stores firmware, calibration constants, and instrument commands. The USB interface supports data transfer to a host computer, and the LCD controller enables an integrated display. With a 1.65 V to 3.6 V supply range, the device can operate from compact power systems. Use the 20 KB of SRAM for measurement buffers, the 6 KB of EEPROM for persistent configuration, and careful analog/digital partitioning to prevent switching or display signals from disturbing sensitive measurements.

What are the key specifications of STM32L073CZU6 that engineers should know?
The STM32L073CZU6 is a 32 MHz ultra-low-power Arm Cortex-M0+ MCU with 192 KB of Flash, 20 KB of SRAM, 6 KB of EEPROM, and a 1.65 V to 3.6 V operating range. According to the STMicroelectronics STM32L073CZ product page, the device combines USB 2.0 crystal-less connectivity with LCD controller support and is packaged in a 48-pin 7 x 7 mm UFQFPN. These characteristics make it appropriate for compact USB-connected control, data-logging, sensor, and human-machine-interface designs.
What is the operating voltage of STM32L073CZU6?
The STM32L073CZU6 operates from 1.65 V to 3.6 V. This low-voltage range suits compact embedded systems, battery-operated products, and USB-powered equipment. According to the STMicroelectronics product-page information, the MCU includes a 32 MHz Arm Cortex-M0+ processor, 192 KB of Flash memory, and 20 KB of SRAM. The power architecture and operating voltage should be checked against the selected external components and the USB transceiver arrangement used in the complete design.
How much memory does STM32L073CZU6 have?
The STM32L073CZU6 contains 192 KB of Flash organized as 192K x 8 bits, 20 KB of SRAM, and 6 KB of EEPROM. According to the STMicroelectronics STM32L073CZ product information and the matching distributor technical listing, the Flash capacity supports application firmware and boot code, while SRAM accommodates active data and stack space. The EEPROM provides nonvolatile storage for configuration values, calibration records, or counters that must survive a power cycle.
Does STM32L073CZU6 support USB and LCD?
Yes, the STM32L073CZU6 integrates USB 2.0 crystal-less connectivity and LCD controller support. The manufacturer describes the STM32L073xx family as combining universal serial bus connectivity with LCD capability. Crystal-less USB operation can reduce the need for a dedicated USB clock source, while the LCD controller can simplify designs that use a compatible segment or graphical display. The selected display still requires correct voltage levels, timing configuration, and PCB routing.
What is the best drop-in replacement for STM32L073CZU6?
The closest same-family choices include the STM32L072CZU6, STM32L073CBU6, STM32L073CCU6, STM32L081CZU6, and STM32L083CZU6 in the same 48-pin UFQFPN footprint. They are not exact substitutes in every functional respect: flash capacity, LCD behavior, and hardware-security features can differ. Before replacing the STM32L073CZU6, verify the pin-definition table, power behavior, USB implementation, display requirements, clock configuration, boot process, and the device-specific library revision used by the firmware.
Can STM32L072CZU6 replace STM32L073CZU6?
The STM32L072CZU6 is a same-package STM32L0 candidate, but it should be treated as a conditional replacement rather than an automatic interchange. According to the manufacturer’s STM32L073CZ product page, the STM32L073 family emphasizes USB connectivity and LCD controller support. The STM32L072CZU6 uses the same 48-pin UFQFPN package family and 1.65 V to 3.6 V supply class, but its LCD and peripheral feature set must be checked. Firmware may also require a different STM32Cube device definition and startup configuration.
When should I choose STM32L073CZU6 over STM32L073CBU6?
Choose STM32L073CZU6 when the design benefits from 192 KB of Flash and the STM32L073 feature set; choose STM32L073CBU6 when 128 KB of Flash is sufficient and lower memory demand is preferable. The STM32L073CZU6 provides 64 KB more Flash, a 50% increase over 128 KB, while retaining the same 48-pin package class and Cortex-M0+ operating architecture. Actual interchangeability depends on matching the exact UFQFPN land pattern, exposed-pad connection, peripheral assignment, and pin multiplexing.
Is STM32L073CZU6 suitable for a low-power USB sensor node?
The STM32L073CZU6 is well suited to a low-power USB sensor node because it combines a 32 MHz Cortex-M0+ core, 20 KB of SRAM, USB 2.0 crystal-less connectivity, and a 1.65 V to 3.6 V supply range. According to the STMicroelectronics product page, the STM32L073 family is designed for ultra-low-power applications. Place the sensor and MCU decoupling close to their supply pins, control USB and peripheral clocks through firmware, and select a sensor interface whose signal levels match the selected STM32 peripheral pins.
Where can I download the STM32L073CZU6 datasheet PDF?
The official STM32L073CZ product page provides the manufacturer’s technical documentation and access to the STM32L073 family datasheet. Use the STMicroelectronics product page linked on this page for the authoritative pin definitions, electrical characteristics, memory map, USB implementation, and package drawing. The STM32L073CZU6 ordering code identifies the 48-pin UFQFPN configuration, while the family document covers shared characteristics. Always apply the latest manufacturer revision when assigning PCB nets or calculating timing.
Where can I find the STM32L073CZU6 pinout?
The STM32L073CZU6 pinout is defined in the manufacturer’s STM32L073 family datasheet and pin-description material. The device uses a 48-pin UFQFPN package with an exposed pad, so the physical land pattern must include all 48 peripheral pins as well as the exposed thermal and electrical connection. Assign signals from the datasheet pin table rather than from a generic UFQFPN drawing, because USB, LCD, debug, clock, and supply functions can vary across alternate functions.
What tools are compatible with STM32L073CZU6?
The STM32L073CZU6 is programmed and debugged through the Arm Cortex-M0+ debug and trace architecture supported by the STM32 programming toolchain. STMicroelectronics STM32CubeMX, STM32CubeIDE, and STM32CubeProgrammer provide configuration, firmware-generation, programming, and debugging workflows. Firmware should target the correct STM32L073CZ device definition and use the appropriate STM32L0 HAL or low-level drivers. USB applications may also require the crystal-less USB support present in the device family.
Is STM32L073CZU6 RoHS compliant?
The STM32L073CZU6 is identified as RoHS compliant in its distributor technical listing. According to STMicroelectronics product information, it is an ultra-low-power 32 MHz Cortex-M0+ MCU with 192 KB of Flash, USB connectivity, and LCD support in a 48-pin UFQFPN package. RoHS compliance does not by itself confirm automotive qualification, REACH status, halogen-free status, or conflict-minerals reporting; those requirements should be evaluated separately for the intended product and procurement configuration.
Where can I buy STM32L073CZU6 online?
The STM32L073CZU6 can be requested through the “Request a Quote” form on this page. The form supports current pricing, stock confirmation, lead-time inquiry, and order processing without relying on a static quotation. The manufacturer also offers an online ordering channel for the exact STM32L073CZU6 designation. Buyers should specify the 48-pin UFQFPN package and confirm the suffix, delivery format, quantity, and target shipment date before releasing the purchase order.
What is the lead time for STM32L073CZU6?
Current lead time and quantity availability for the STM32L073CZU6 should be confirmed through the “Request a Quote” form on this page. Lead time can vary with the requested quantity, manufacturing schedule, distribution channel, and delivery format. The exact ordering code is STM32L073CZU6, which denotes the 48-pin UFQFPN device discussed on this page. Include your required quantity, shipment destination, target date, and production schedule so procurement can provide the most useful commitment.
Is STM32L073CZU6 in stock?
Current stock for STM32L073CZU6 is confirmed through the “Request a Quote” form on this page. The exact MPN is an active manufacturer ordering configuration with a 48-pin UFQFPN package, but inventory and delivery commitments can change with market demand. Include your required quantity, acceptable date, and desired shipping format in the request. The quotation response should be used as the contractual confirmation of availability and lead time.
What is the difference between STM32L073CZU6 and STM32L081CZU6?
Both parts use the same 48-pin UFQFPN package class and 32 MHz Cortex-M0+ architecture, but they serve different feature requirements. The STM32L081 family adds hardware-security capabilities that are useful for authenticated and encrypted products, while the STM32L073CZU6 emphasizes USB and LCD connectivity. According to the manufacturer’s STM32L073CZ product information, the target has 192 KB of Flash and supports crystal-less USB and an LCD controller. Select the alternative only after reviewing its security peripherals and firmware-support requirements.

Données de référence d'ingénierie pour STM32L073CZU6 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose STM32L073CZU6 when an embedded product needs a 32 MHz Cortex-M0+ core, 192 KB of Flash, 20 KB of SRAM, crystal-less USB 2.0, and LCD controller support in a compact 48-pin UFQFPN package. Choose STM32L072CZU6 when its USB and peripheral configuration satisfies the design and its feature set has been checked against the STM32L073 requirements. Choose STM32L073CBU6 when 128 KB of Flash is sufficient; it reduces memory by 64 KB while retaining the package family. Choose STM32L073CCU6 when an additional 64 KB of Flash is useful. Choose STM32L081CZU6 or STM32L083CZU6 when hardware-security functions are required. In every substitution, verify the exact UFQFPN land pattern, exposed-pad connection, USB implementation, LCD resources, clock setup, boot behavior, and firmware device definition.

Comparaison avec les alternatives

Paramètre Ce produit STM32L072CZU6 STM32L073CBU6 STM32L073CCU6 STM32L081CZU6 STM32L083CZU6
Manufacturer STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 48-pin UFQFPN, 7 x 7 mm 48-pin UFQFPN, 7 x 7 mm 48-pin UFQFPN, 7 x 7 mm 48-pin UFQFPN, 7 x 7 mm 48-pin UFQFPN, 7 x 7 mm 48-pin UFQFPN, 7 x 7 mm
Processor Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz

Principaux différenciateurs

  • Higher Flash density within the STM32L073 family (vs STM32L073CBU6)
  • Lower memory demand without changing package family (vs STM32L073CCU6)
  • Security-focused family alternatives add specialized peripherals (vs STM32L081CZU6)
  • USB and LCD integration supports compact control products (vs STM32L072CZU6)

Notes de conception

Assign every MCU net from the manufacturer’s STM32L073CZ pin-definition table rather than from a generic 48-pin UFQFPN footprint. Confirm every power, ground, reset, boot, debug, USB, LCD, and exposed-pad connection for the exact UFQFPN ordering option. Place the required supply capacitors adjacent to their associated VDD and VSS pins, and provide a continuous ground reference beneath the device so return currents have a low-impedance path.

Route the USB D+ and D- conductors as a short, tightly coupled 90-ohm differential pair with a continuous reference plane and minimal vias. Keep the USB connector, protection devices, and MCU interface in the same signal region, and avoid placing switching-regulator high-current paths beneath the differential pair. Crystal-less USB support reduces the clock-component burden, but correct USB clock recovery settings, impedance, shielding, and connector return paths remain essential for reliable enumeration and data transfer.

Use the 1.65 V to 3.6 V operating range as a hard design constraint. Place local decoupling close to each supply pin, verify the voltage tolerance of every externally connected signal, and account for USB bus-powered current limits. For battery systems, disable unused clocks and peripherals between events, enter an appropriate low-power mode only after confirming wake sources and required USB behavior. Use the manufacturer power-management guidance to preserve the intended low-power performance.

Do not assume that identical UFQFPN dimensions guarantee functional interchangeability. The STM32L072, STM32L073, STM32L081, and STM32L083 variants can differ in Flash density, LCD resources, security peripherals, alternate functions, and device identification. Before substituting a part, update the STM32Cube device configuration, rebuild the boot and peripheral initialization code, verify USB descriptors and display timing, and perform boundary testing on the assembled PCB.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS compliance is identified in the exact-MPN distributor listing. The remaining environmental, automotive, lead-free, halogen-free, and conflict-minerals declarations are not stated and remain unknown.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

STM32L073CZU6 STM32L073CZU6 datasheet STM32L073CZU6 datasheet pdf STM32L073CZU6 pinout STM32L073CZU6 footprint STM32L073CZU6 equivalent STM32L073CZU6 replacement STM32L073CZU6 cross reference STM32L073CZU6 vs STM32L081CZU6 STM32L073CZU6 price STM32L073CZU6 stock STMicroelectronics STM32L073CZU6 STM32L073CZU6 USB LCD microcontroller STM32L073 48 UFQFPN pinout

Composants & termes associés

STMicroelectronics STM32L073CZU6 STM32L072CZU6 STM32L073CBU6 STM32L073CCU6 STM32L081CZU6 STM32L083CZU6 Arm Cortex-M0+ microcontroller ultra-low-power microcontroller embedded microcontroller 32-bit microcontroller USB 2.0 crystal-less LCD controller UFQFPN-48 QFN family surface mount semiconductor 192 KB Flash memory 20 KB SRAM 6 KB EEPROM 1.65 V to 3.6 V power supply STM32CubeMX STM32CubeIDE STM32CubeProgrammer industrial sensor node
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ