STM32L073CZU6 - 32MHz Cortex-M0+ 192KB MCU | STMicroelectronics
MPN: STM32L073CZU6 ✓ AktifSTM32L073CZU6 Genel Bakış
An ultra-low-power microcontroller is an energy-efficient embedded processing device designed to operate from a restricted power budget while providing real-time control, communications, and data acquisition. The STM32L0 family belongs to the Arm Cortex-M0+ microcontroller hierarchy, combining a compact 32-bit processor with peripherals and low-power modes for battery-powered and always-connected equipment.
The STM32L073CZU6 provides 192 KB of Flash for firmware and 20 KB of SRAM for working data, while its 6 KB of EEPROM supports nonvolatile parameter storage. Its 32 MHz Cortex-M0+ core balances processing capability with low power consumption. USB 2.0 crystal-less operation reduces external clock requirements, while the integrated LCD controller enables direct control of compatible segment or graphical displays.
The 1.65 V to 3.6 V supply range supports low-voltage embedded systems. A 48-pin UFQFPN package with an exposed pad provides a compact surface-mount footprint and a thermal connection to the PCB. This combination is useful when a design requires more peripheral connectivity and memory than a smaller STM32L0 package provides without moving to a higher-performance Cortex-M3 or Cortex-M4 architecture.
Typical uses include USB-connected portable instruments, low-power industrial data loggers, battery-powered medical peripherals, compact human-machine interfaces, environmental sensors, and USB-to-serial or USB-to-control adapters. The USB and LCD capabilities are particularly valuable where external USB transceivers or dedicated display controllers would otherwise increase board area.
PCB design should follow the manufacturer pin-definition and land-pattern guidance exactly, including the exposed-pad connection and all supply pins. Place decoupling capacitors close to the appropriate VDD pins, route USB data as a controlled 90-ohm differential pair, and connect the exposed pad to the ground plane. Firmware should also enable clock, USB, and peripheral settings only when needed to maximize low-power performance.
This page combines the manufacturer product information with application-oriented design guidance, drop-in same-family alternatives, and a parameter comparison. It helps engineers distinguish the STM32L073CZU6 from lower-memory, higher-memory, LCD, and security-oriented members of the STM32L0 family before committing the device to a PCB design.
Drop-in alternatifler için STM32L073CZU6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
STM32L072CZU6
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L073CBU6
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L073CCU6
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L081CZU6
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L083CZU6
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
STM32L073CZU6 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M0+ |
| CPU Architecture | 32-bit single-core |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 192 KB |
| Flash Organization | 192K x 8 bits |
| SRAM | 20 KB |
| EEPROM | 6 KB |
| İşletim Besleme Gerilimi | 1.65 V to 3.6 V |
| USB Interface | USB 2.0 crystal-less |
| Display Support | Integrated LCD controller |
| GPIO Count | 37 I/O ports |
| Paket | 48-pin UFQFPN, 7 x 7 mm |
| Montaj Türü | Surface mount |
| RoHS Durumu | RoHS compliant |
STM32L073CZU6 48-pin ufqfpn, 7 x 7 mm Pin Yapısı Kılavuzu
STM32L073CZU6 (48-pin ufqfpn, 7 x 7 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: STM32L073CZU6.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
STM32L073CZU6 için uygundur 6 uygulamas: USB-connected industrial sensor node, Battery-powered environmental monitor, Compact medical data-acquisition device, USB-to-control and configuration adapter, Low-power human-machine interface, Portable test and measurement instrument.
USB-connected industrial sensor node
The STM32L073CZU6 fits an industrial sensor node that must collect measurements and expose them through a USB interface without adding a separate communications processor. Its 32 MHz Arm Cortex-M0+ core provides control capability, while 192 KB of Flash accommodates drivers, protocol handling, and application logic. The 20 KB of SRAM supports buffering and the 6 KB of EEPROM can retain calibration data. Its 1.65 V to 3.6 V operating range simplifies integration with low-voltage sensor circuits. Crystal-less USB support can also reduce clock-component count, although USB signal routing, power budgeting, and industrial temperature requirements still need verification.
Önerilen
Battery-powered environmental monitor
The STM32L073CZU6 is appropriate for a battery-powered environmental monitor because its ultra-low-power STM32L0 architecture combines a 32 MHz Cortex-M0+ core with a 1.65 V to 3.6 V supply range. The MCU can supervise humidity, temperature, and gas sensors, store configuration in its 6 KB EEPROM, and use the 20 KB SRAM for active measurements. Run the core and unused peripherals between sampling intervals to reduce energy use. The 192 KB Flash capacity is useful for calibration tables and local logging logic, while the 48-pin UFQFPN package leaves sufficient I/O for sensors, indicators, and a low-power display.
Önerilen
Compact medical data-acquisition device
The STM32L073CZU6 can serve as the control MCU in a compact medical data-acquisition device that combines sensing, local storage, and USB connectivity. Its 192 KB of Flash supports protocol and control firmware, while 20 KB of SRAM handles buffered samples and 6 KB of EEPROM preserves device configuration. The 48-pin UFQFPN package reduces board footprint, and the 1.65 V to 3.6 V range supports low-voltage system rails. USB 2.0 crystal-less connectivity is useful for a simplified host interface. Medical designs still require appropriate isolation, protection, validation, and regulatory controls; the MCU qualification alone does not establish compliance for the finished instrument.
Önerilen
USB-to-control and configuration adapter
The STM32L073CZU6 is a practical MCU for a USB-to-control adapter because it integrates a 32 MHz Cortex-M0+ processor, USB 2.0 crystal-less connectivity, and enough memory for configuration and command handling. Firmware can expose relays, GPIO, instrumentation, or programmable controls to a computer without requiring a separate USB controller. The 37 I/O ports provide more interface options than smaller packages, while 192 KB of Flash allows device-specific command sets and USB descriptors to be stored on-chip. Use a supported USB connector protection arrangement, maintain controlled impedance routing, and verify the selected USB power source against the device’s complete load current.
Önerilen
Low-power human-machine interface
The STM32L073CZU6 supports a compact human-machine interface because its LCD controller can drive a compatible display while the Cortex-M0+ core processes keypad, status, and configuration functions. The 48-pin package provides 37 I/O ports, leaving control signals for buttons, indicators, and interface peripherals while the LCD signals occupy dedicated resources. With 192 KB of Flash and 20 KB of SRAM, the MCU can host menu logic, graphics control, and communication firmware without an external display controller. The 1.65 V to 3.6 V supply range helps simplify shared-rail designs. Confirm the selected display’s electrical interface, timing requirements, and pin assignment before committing the board layout.
Önerilen
Portable test and measurement instrument
The STM32L073CZU6 can serve as the control and communications MCU in a portable test instrument. Its 32 MHz Cortex-M0+ core handles measurement sequencing and user interaction, while 192 KB of Flash stores firmware, calibration constants, and instrument commands. The USB interface supports data transfer to a host computer, and the LCD controller enables an integrated display. With a 1.65 V to 3.6 V supply range, the device can operate from compact power systems. Use the 20 KB of SRAM for measurement buffers, the 6 KB of EEPROM for persistent configuration, and careful analog/digital partitioning to prevent switching or display signals from disturbing sensitive measurements.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: STM32L073CZU6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | STM32L072CZU6 | STM32L073CBU6 | STM32L073CCU6 | STM32L081CZU6 | STM32L083CZU6 |
|---|---|---|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm | 48-pin UFQFPN, 7 x 7 mm |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
Ana Farklılayıcılar
- Higher Flash density within the STM32L073 family (karşılaştırma:STM32L073CBU6)
- Lower memory demand without changing package family (karşılaştırma:STM32L073CCU6)
- Security-focused family alternatives add specialized peripherals (karşılaştırma:STM32L081CZU6)
- USB and LCD integration supports compact control products (karşılaştırma:STM32L072CZU6)
Tasarım Notları
Assign every MCU net from the manufacturer’s STM32L073CZ pin-definition table rather than from a generic 48-pin UFQFPN footprint. Confirm every power, ground, reset, boot, debug, USB, LCD, and exposed-pad connection for the exact UFQFPN ordering option. Place the required supply capacitors adjacent to their associated VDD and VSS pins, and provide a continuous ground reference beneath the device so return currents have a low-impedance path.
Route the USB D+ and D- conductors as a short, tightly coupled 90-ohm differential pair with a continuous reference plane and minimal vias. Keep the USB connector, protection devices, and MCU interface in the same signal region, and avoid placing switching-regulator high-current paths beneath the differential pair. Crystal-less USB support reduces the clock-component burden, but correct USB clock recovery settings, impedance, shielding, and connector return paths remain essential for reliable enumeration and data transfer.
Use the 1.65 V to 3.6 V operating range as a hard design constraint. Place local decoupling close to each supply pin, verify the voltage tolerance of every externally connected signal, and account for USB bus-powered current limits. For battery systems, disable unused clocks and peripherals between events, enter an appropriate low-power mode only after confirming wake sources and required USB behavior. Use the manufacturer power-management guidance to preserve the intended low-power performance.
Do not assume that identical UFQFPN dimensions guarantee functional interchangeability. The STM32L072, STM32L073, STM32L081, and STM32L083 variants can differ in Flash density, LCD resources, security peripherals, alternate functions, and device identification. Before substituting a part, update the STM32Cube device configuration, rebuild the boot and peripheral initialization code, verify USB descriptors and display timing, and perform boundary testing on the assembled PCB.
Uyumluluk Bilgisi
RoHS compliance is identified in the exact-MPN distributor listing. The remaining environmental, automotive, lead-free, halogen-free, and conflict-minerals declarations are not stated and remain unknown.