STM32L151C8T6 - 32-bit ARM Cortex-M3 MCU, 64KB Flash | STMicroelectronics
Référence : STM32L151C8T6 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $5.5369 | $5,54 |
STM32L151C8T6 Présentation
What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. The STM32L151C8T6 belongs to the STM32L1 family, which is part of the broader STM32 portfolio of 32-bit ARM Cortex-M microcontrollers. This hierarchy places it within the ARM Cortex-M3 core category, known for its balance of performance and power efficiency, and ultimately within the semiconductor industry's embedded processing segment.
Key features include multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop with RTC, Standby with RTC), a 12-bit ADC with 16 channels, two 12-bit DACs, and a rich set of communication interfaces including I2C, SPI, USART, and USB 2.0. The device also integrates a real-time clock (RTC) with backup registers, and a variety of timers including advanced-control, general-purpose, and basic timers. Its ultra-low-power design achieves typical current consumption as low as 230 µA in Run mode at 32 MHz and 1.1 µA in Standby mode with RTC, enabling extended battery life.
Technically, the STM32L151C8T6 is built on a 130 nm process technology, which contributes to its low leakage and power efficiency. The Cortex-M3 core includes a hardware divider and single-cycle multiply, and supports Thumb-2 instruction set for code density. The device features a nested vectored interrupt controller (NVIC) for deterministic interrupt handling, and a memory protection unit (MPU) for enhanced application robustness. The embedded Flash supports read-while-write, allowing firmware updates without halting execution.
Typical applications include portable medical devices (e.g., glucose meters, pulse oximeters), smart sensors for IoT nodes, industrial process control, and consumer electronics such as fitness trackers and smartwatches. Its low-power modes and rich analog peripherals make it particularly suited for applications requiring long battery life and precise analog measurements.
When designing with this MCU, pay careful attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 µF capacitor on the main supply. Also, configure the clock source appropriately—using the internal 16 MHz HSI oscillator can save cost, but for accurate timing, an external 32.768 kHz crystal for the RTC is recommended.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32L151C8T6.
Alternatives de remplacement direct pour STM32L151C8T6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32L151C8T6A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32L151CBT6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32L151C6T6
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
STM32L151C8T6 Valeurs maximales et caractéristiques électriques
| Core | ARM Cortex-M3 |
| Max Clock Frequency | 32 MHz |
| Flash Memory | 64 KB |
| SRAM | 16 KB |
| Tension d'alimentation | 1.8 V to 3.6 V |
| Boîtier | LQFP-48 (7x7 mm) |
| Température de fonctionnement | -40C to +85C |
| ADC | 12-bit, 16 channels |
| DAC | 12-bit, 2 channels |
| Communication Interfaces | I2C, SPI, USART, USB 2.0 |
| Timers | Advanced, general-purpose, basic |
| RTC | Yes, with backup registers |
| Low-power Modes | Sleep, Low-power Run, Low-power Sleep, Stop, Standby |
| Standby Current | 1.1 µA (with RTC) |
| Statut RoHS | Compliant |
Configuration des broches de STM32L151C8T6
| Broche 1 | VBAT — Backup battery supply |
| Broche 2 | PC13 — GPIO / RTC tamper |
| Broche 3 | PC14 — GPIO / OSC32_IN |
| Broche 4 | PC15 — GPIO / OSC32_OUT |
| Broche 5 | OSC_IN — External clock input |
| Broche 6 | OSC_OUT — External clock output |
| Broche 7 | NRST — Reset (active low) |
| Broche 8 | VSSA — Analog ground |
| Broche 9 | VDDA — Analog power supply |
| Broche 10 | PA0 — GPIO / ADC_IN0 |
| Broche 11 | PA1 — GPIO / ADC_IN1 |
| Broche 12 | PA2 — GPIO / ADC_IN2 / USART2_TX |
| Broche 13 | PA3 — GPIO / ADC_IN3 / USART2_RX |
| Broche 14 | PA4 — GPIO / ADC_IN4 / DAC_OUT1 |
| Broche 15 | PA5 — GPIO / ADC_IN5 / DAC_OUT2 |
| Broche 16 | PA6 — GPIO / ADC_IN6 / SPI1_MISO |
| Broche 17 | PA7 — GPIO / ADC_IN7 / SPI1_MOSI |
| Broche 18 | PB0 — GPIO / ADC_IN8 |
| Broche 19 | PB1 — GPIO / ADC_IN9 |
| Broche 20 | PB2 — GPIO / BOOT1 |
| Broche 21 | PB10 — GPIO / I2C2_SCL |
| Broche 22 | PB11 — GPIO / I2C2_SDA |
| Broche 23 | PB12 — GPIO / SPI2_NSS |
| Broche 24 | PB13 — GPIO / SPI2_SCK |
| Broche 25 | PB14 — GPIO / SPI2_MISO |
| Broche 26 | PB15 — GPIO / SPI2_MOSI |
| Broche 27 | PA8 — GPIO / MCO |
| Broche 28 | PA9 — GPIO / USART1_TX |
| Broche 29 | PA10 — GPIO / USART1_RX |
| Broche 30 | PA11 — GPIO / USB_DM |
| Broche 31 | PA12 — GPIO / USB_DP |
| Broche 32 | PA13 — GPIO / SWDIO |
| Broche 33 | PA14 — GPIO / SWCLK |
| Broche 34 | PA15 — GPIO / JTDI |
| Broche 35 | PB3 — GPIO / JTDO |
| Broche 36 | PB4 — GPIO / NJTRST |
| Broche 37 | PB5 — GPIO / I2C1_SMBA |
| Broche 38 | PB6 — GPIO / I2C1_SCL |
| Broche 39 | PB7 — GPIO / I2C1_SDA |
| Broche 40 | BOOT0 — Boot mode selection |
| Broche 41 | PB8 — GPIO / I2C1_SCL |
| Broche 42 | PB9 — GPIO / I2C1_SDA |
| Broche 43 | VSS — Ground |
| Broche 44 | VDD — Power supply |
| Broche 45 | PC0 — GPIO / ADC_IN10 |
| Broche 46 | PC1 — GPIO / ADC_IN11 |
| Broche 47 | PC2 — GPIO / ADC_IN12 |
| Broche 48 | PC3 — GPIO / ADC_IN13 |
Applications typiques
STM32L151C8T6 convient pour 6 applications: Portable Medical Devices, Smart Sensors for IoT, Industrial Process Control, Consumer Electronics, Smart Home Automation, Test and Measurement Equipment.
Portable Medical Devices
The STM32L151C8T6 is ideal for portable medical devices such as glucose meters, pulse oximeters, and blood pressure monitors. Its ultra-low-power operation (230 µA in Run mode, 1.1 µA in Standby) extends battery life, critical for patient convenience. The integrated 12-bit ADC with 16 channels enables precise sensor readings, while the 12-bit DAC can generate analog control signals for actuators. The device's multiple low-power modes allow the system to sleep between measurements, conserving energy. Communication interfaces like I2C and USART facilitate data transfer to displays or external storage. The Cortex-M3 core provides sufficient processing power for signal filtering and algorithms, while the MPU enhances reliability in medical applications. Designers can leverage the RTC for timestamping and the backup registers for storing calibration data. The wide supply voltage range (1.8V to 3.6V) accommodates various battery chemistries, including lithium-ion and alkaline. Overall, the STM32L151C8T6 balances performance, power, and analog integration, making it a strong choice for battery-powered medical devices.
Recommandé
Smart Sensors for IoT
In IoT applications, the STM32L151C8T6 serves as the central controller for smart sensors, aggregating data from temperature, humidity, and motion sensors. Its low-power modes enable battery-powered operation for years, with standby current of 1.1 µA. The device's multiple communication interfaces (I2C, SPI, USART) allow seamless connection to various sensor modules and wireless transceivers (e.g., LoRa, BLE). The 12-bit ADC with 16 channels can directly interface with analog sensors, while the DAC can output analog control signals. The Cortex-M3 core efficiently runs sensor fusion algorithms, and the MPU provides memory protection for robust operation. The RTC with backup registers enables scheduled wake-ups and data logging. The wide supply voltage range (1.8V to 3.6V) supports battery and energy-harvesting sources. The STM32L151C8T6's rich peripheral set and low power consumption make it an excellent choice for edge nodes in IoT networks, where energy efficiency and connectivity are paramount.
Recommandé
Industrial Process Control
The STM32L151C8T6 is well-suited for industrial process control applications such as PLCs, motor controllers, and monitoring systems. Its robust design operates over -40C to +85C, suitable for harsh environments. The device's multiple timers, including advanced-control timers, enable precise PWM generation for motor control. The 12-bit ADC with 16 channels can monitor multiple analog signals (e.g., temperature, pressure, current) simultaneously. Communication interfaces like USART and SPI allow interfacing with industrial fieldbuses (e.g., RS-485, CAN via external transceiver). The Cortex-M3 core provides deterministic interrupt handling via the NVIC, essential for real-time control. The MPU enhances system reliability by preventing memory corruption. The low-power modes are beneficial for energy-efficient operation in remote or battery-backed systems. The wide supply voltage range (1.8V to 3.6V) allows direct connection to 3.3V logic and sensors. Overall, the STM32L151C8T6 offers a balanced combination of performance, peripherals, and reliability for industrial applications.
Recommandé
Consumer Electronics
In consumer electronics like fitness trackers, smartwatches, and remote controls, the STM32L151C8T6 provides the processing power and low energy consumption required for always-on devices. Its standby current of 1.1 µA ensures minimal battery drain during idle periods. The device's rich peripheral set includes USB 2.0 for charging and data transfer, I2C for connecting to displays and sensors, and SPI for external memory. The 12-bit ADC can read battery voltage and sensor inputs, while the DAC can generate audio tones or haptic feedback signals. The Cortex-M3 core efficiently handles user interface logic and sensor data processing. The RTC enables timekeeping and alarms, and the backup registers preserve user settings during power loss. The compact LQFP-48 package fits into space-constrained designs. The wide supply voltage range (1.8V to 3.6V) supports single-cell batteries. The STM32L151C8T6's combination of low power, connectivity, and analog features makes it a popular choice for consumer electronics.
Recommandé
Smart Home Automation
The STM32L151C8T6 is an excellent choice for smart home devices such as thermostats, smart locks, and lighting controllers. Its low-power modes enable battery-powered operation for months or years. The device's multiple communication interfaces (I2C, SPI, USART) allow integration with various wireless modules (e.g., Zigbee, Z-Wave, BLE) for home automation networks. The 12-bit ADC can read temperature sensors and light sensors, while the DAC can control dimming levels for LED lighting. The Cortex-M3 core runs control algorithms and user interface logic. The RTC with backup registers enables scheduling and event logging. The wide supply voltage range (1.8V to 3.6V) supports battery and mains-powered designs. The STM32L151C8T6's rich peripheral set and low power consumption make it ideal for smart home devices that require reliable, energy-efficient operation.
Recommandé
Test and Measurement Equipment
The STM32L151C8T6 is used in portable test and measurement equipment such as multimeters, data loggers, and signal generators. Its high-resolution 12-bit ADC and DAC enable accurate analog measurements and signal generation. The device's multiple timers can generate precise timing signals for frequency measurement and PWM output. Communication interfaces like USART and USB allow data transfer to a PC for analysis. The Cortex-M3 core provides sufficient processing power for digital signal processing and calibration algorithms. The low-power modes are beneficial for battery-operated field instruments. The wide supply voltage range (1.8V to 3.6V) accommodates various power sources. The STM32L151C8T6's combination of analog peripherals, timers, and low power makes it well-suited for portable test equipment.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32L151C8T6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32L151C8T6A | STM32L151CBT6 | STM32L151C6T6 |
|---|---|---|---|---|
| Package | LQFP-48 | LQFP-48 (same) | LQFP-48 (same) | LQFP-48 (same) |
| Flash Memory | 64 KB | 64 KB | 128 KB | 32 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 8 KB |
| Max Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Supply Voltage | 1.8V to 3.6V | 1.8V to 3.6V | 1.8V to 3.6V | 1.8V to 3.6V |
| ADC Channels | 16 | 16 | 16 | 16 |
| DAC Channels | 2 | 2 | 2 | 2 |
| Standby Current | 1.1 µA | 1.1 µA | 1.1 µA | 1.1 µA |
Principaux différenciateurs
- Ultra-low-power operation with 1.1 µA standby current (vs STM32F103C8T6)
- Integrated 12-bit DAC with 2 channels (vs STM32L151C6T6)
- Larger Flash memory (64 KB) vs 32 KB (vs STM32L151C6T6)
Notes de conception
Decouple each VDD pin with a 100 nF ceramic capacitor placed as close as possible to the pin. Additionally, place a 4.7 µF capacitor on the main VDD rail. For VDDA, use a 1 µF capacitor and a ferrite bead to isolate analog noise. Ensure VBAT is connected to a backup battery or tied to VDD if not used.
For the LQFP-48 package, ensure proper solder paste stencil design to avoid bridging. Use a 0.5 mm pitch land pattern. Provide a solid ground plane under the MCU to reduce EMI. Keep high-speed signals (SPI, USB) away from the crystal oscillator to prevent interference.
Do not leave the BOOT0 pin floating; tie it to ground through a 10 kΩ resistor for normal boot from Flash. Ensure the NRST pin has a 100 nF capacitor to ground for reliable reset. When using the RTC, connect a 32.768 kHz crystal with 6 pF load capacitors to OSC32_IN/OSC32_OUT.
Informations de conformité
RoHS compliant per STMicroelectronics product page. AEC-Q100 not applicable for this commercial-grade MCU.
