STM32L162RET6 - Ultra-Low-Power ARM Cortex-M3 MCU | STMicroelectronics
Référence : STM32L162RET6 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $8.5 | $8,50 |
| 10 | $7.65 | $76,50 |
| 100 | $6.8 | $680,00 |
| 500 | $6.12 | $3 060,00 |
| 1 000 | $5.44 | $5 440,00 |
STM32L162RET6 Présentation
An ultra-low-power microcontroller (MCU) is a type of embedded processor optimized for minimal power consumption, often featuring multiple low-power modes, low supply voltages, and efficient clock management. These MCUs are essential in battery-operated devices, IoT sensors, and portable medical equipment where extending battery life is critical. The STM32L1 series sits within the broader STM32 family, which spans from low-power to high-performance Cortex-M based MCUs, and is part of the ARM Cortex-M ecosystem.
Key features of the STM32L162RET6 include a 32 MHz ARM Cortex-M3 core with memory protection unit (MPU), 512 KB Flash, 80 KB SRAM, and a comprehensive set of peripherals: USB 2.0 full-speed device, LCD controller supporting up to 8x40 segments, AES-128 hardware encryption, 12-bit ADC, 12-bit DAC, multiple timers, and communication interfaces (USART, SPI, I2C). It operates from 1.8V to 3.6V supply and features several low-power modes: Sleep, Low-power Run, Low-power Sleep, Stop with RTC, and Standby, with current consumption as low as 0.3 uA in Standby mode.
The STM32L162RET6 is built on ST's ultra-low-power technology, which combines a low-leakage process with dynamic voltage scaling and a flexible clock gating architecture. This enables the MCU to achieve industry-leading energy efficiency, with a typical active-mode current of 230 uA/MHz. The integrated AES-128 encryption engine provides hardware-accelerated security for data protection, making it suitable for secure communication and authentication applications.
Typical applications include smart meters, medical devices (e.g., glucose monitors, hearing aids), industrial sensors, IoT nodes, and portable consumer electronics. The LCD controller and USB interface make it ideal for human-machine interface (HMI) applications, while the AES engine supports secure data logging and communication.
When designing with this device, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF capacitor at the main supply. Use the low-power modes effectively by configuring the RTC and wake-up sources to minimize average current consumption. The STM32L162RET6 is available in LQFP64 package, which is pin-compatible with other STM32L1 series devices in the same package, allowing easy migration.
Alternatives de remplacement direct pour STM32L162RET6 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec STM32L162RET6 (même facteur de forme et même empreinte) — différant par Communication Interfaces, Flash Memory, Package, SRAM.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
STM32L162RCT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$2.8636 / unité
Voir la fiche technique →STM32L152RET6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32L151RET6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32L162RDT6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32L162R8T6
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
STM32L162RET6 Valeurs maximales et caractéristiques électriques
| Core | ARM Cortex-M3 |
| Max Clock Frequency | 32 MHz |
| Flash Memory | 512 KB |
| SRAM | 80 KB |
| Tension d'alimentation | 1.8 V to 3.6 V |
| Boîtier | LQFP64 (10x10 mm) |
| Température de fonctionnement | -40C to +85C |
| GPIO Pins | 51 |
| ADC | 12-bit, 16 channels |
| DAC | 12-bit, 2 channels |
| Timers | 8 (16-bit and 32-bit) |
| Communication Interfaces | USB 2.0 FS, 3x USART, 2x SPI, 2x I2C |
| LCD Controller | 8x40 segments |
| AES Encryption | 128-bit hardware |
| Standby Current | 0.3 uA |
| Active Current | 230 uA/MHz |
| Statut RoHS | Compliant |
Configuration des broches de STM32L162RET6
| Broche 1 | VBAT — Battery backup supply |
| Broche 2 | PC13 — GPIO / RTC tamper |
| Broche 3 | PC14 — GPIO / OSC32_IN |
| Broche 4 | PC15 — GPIO / OSC32_OUT |
| Broche 5 | PF0 — GPIO / OSC_IN |
| Broche 6 | PF1 — GPIO / OSC_OUT |
| Broche 7 | NRST — Reset (active low) |
| Broche 8 | VSSA — Analog ground |
| Broche 9 | VDDA — Analog power supply |
| Broche 10 | PA0 — GPIO / ADC_IN0 |
| Broche 11 | PA1 — GPIO / ADC_IN1 |
| Broche 12 | PA2 — GPIO / USART2_TX |
| Broche 13 | PA3 — GPIO / USART2_RX |
| Broche 14 | PA4 — GPIO / SPI1_NSS |
| Broche 15 | PA5 — GPIO / SPI1_SCK |
| Broche 16 | PA6 — GPIO / SPI1_MISO |
| Broche 17 | PA7 — GPIO / SPI1_MOSI |
| Broche 18 | PB0 — GPIO / ADC_IN8 |
| Broche 19 | PB1 — GPIO / ADC_IN9 |
| Broche 20 | PB2 — GPIO / BOOT1 |
| Broche 21 | PB10 — GPIO / I2C2_SCL |
| Broche 22 | PB11 — GPIO / I2C2_SDA |
| Broche 23 | PB12 — GPIO / SPI2_NSS |
| Broche 24 | PB13 — GPIO / SPI2_SCK |
| Broche 25 | PB14 — GPIO / SPI2_MISO |
| Broche 26 | PB15 — GPIO / SPI2_MOSI |
| Broche 27 | PC6 — GPIO / USART6_TX |
| Broche 28 | PC7 — GPIO / USART6_RX |
| Broche 29 | PC8 — GPIO / USART6_CK |
| Broche 30 | PC9 — GPIO / USB_DM |
| Broche 31 | PA8 — GPIO / USB_DP |
| Broche 32 | PA9 — GPIO / USART1_TX |
| Broche 33 | PA10 — GPIO / USART1_RX |
| Broche 34 | PA11 — GPIO / USART1_CTS |
| Broche 35 | PA12 — GPIO / USART1_RTS |
| Broche 36 | PA13 — GPIO / SWDIO |
| Broche 37 | PA14 — GPIO / SWCLK |
| Broche 38 | PA15 — GPIO / JTDI |
| Broche 39 | PB3 — GPIO / JTDO |
| Broche 40 | PB4 — GPIO / NJTRST |
| Broche 41 | PB5 — GPIO / I2C1_SMBA |
| Broche 42 | PB6 — GPIO / I2C1_SCL |
| Broche 43 | PB7 — GPIO / I2C1_SDA |
| Broche 44 | PB8 — GPIO / I2C1_SCL |
| Broche 45 | PB9 — GPIO / I2C1_SDA |
| Broche 46 | VSS — Ground |
| Broche 47 | VDD — Power supply |
| Broche 48 | PC10 — GPIO / USART4_TX |
| Broche 49 | PC11 — GPIO / USART4_RX |
| Broche 50 | PC12 — GPIO / USART5_TX |
| Broche 51 | PD2 — GPIO / USART5_RX |
| Broche 52 | VSS — Ground |
| Broche 53 | VDD — Power supply |
| Broche 54 | PC0 — GPIO / ADC_IN10 |
| Broche 55 | PC1 — GPIO / ADC_IN11 |
| Broche 56 | PC2 — GPIO / ADC_IN12 |
| Broche 57 | PC3 — GPIO / ADC_IN13 |
| Broche 58 | PC4 — GPIO / ADC_IN14 |
| Broche 59 | PC5 — GPIO / ADC_IN15 |
| Broche 60 | PB8 — GPIO / I2C1_SCL |
| Broche 61 | PB9 — GPIO / I2C1_SDA |
| Broche 62 | VSS — Ground |
| Broche 63 | VDD — Power supply |
| Broche 64 | VDD — Power supply |
Applications typiques
STM32L162RET6 convient pour 6 applications: Smart Meters, Medical Devices, Industrial Sensors, IoT Nodes, Portable Consumer Electronics, Human-Machine Interface (HMI).
Smart Meters
The STM32L162RET6 is ideal for smart meters due to its ultra-low power consumption, integrated LCD controller for display, and AES encryption for secure data transmission. In a typical smart meter, the MCU reads sensor data, processes it, and communicates via wireless or wired interfaces. The low standby current (0.3 uA) ensures long battery life, while the 32 MHz Cortex-M3 core handles complex metering algorithms. The LCD controller directly drives the display, reducing external components. The AES engine secures communication with the utility network, protecting against tampering. Compared to other MCUs, the STM32L162RET6 offers a balance of performance, power, and security, making it a preferred choice for metering applications.
Recommandé
Medical Devices
The STM32L162RET6 is well-suited for portable medical devices such as glucose monitors and pulse oximeters. Its ultra-low power consumption extends battery life, critical for wearable health monitors. The integrated 12-bit ADC accurately samples sensor signals, while the USB interface enables data transfer to a host for analysis. The AES encryption ensures patient data security. In a glucose monitor, the MCU reads the sensor, processes the reading, and displays it on an LCD. The low-power modes allow the device to run for months on a coin cell battery. The STM32L162RET6's small LQFP64 package fits compact designs, and its wide supply voltage range accommodates battery voltage variations.
Recommandé
Industrial Sensors
The STM32L162RET6 is used in industrial sensors for monitoring temperature, pressure, and flow. Its robust operating temperature range (-40C to +85C) and low power consumption make it suitable for remote and battery-powered sensors. The multiple communication interfaces (USART, SPI, I2C) allow easy integration with industrial networks. The 12-bit ADC provides accurate sensor readings, and the AES encryption secures data in critical infrastructure. In a typical industrial sensor node, the MCU periodically wakes from sleep, reads the sensor, and transmits data via a wireless module. The low standby current ensures long battery life, reducing maintenance costs. The STM32L162RET6's performance is sufficient for real-time processing, while its power efficiency is a key advantage.
Recommandé
IoT Nodes
The STM32L162RET6 is a popular choice for IoT nodes due to its ultra-low power consumption and integrated security features. In an IoT node, the MCU collects data from sensors, processes it, and transmits it to a gateway via wireless protocols like LoRa, Zigbee, or BLE. The AES encryption ensures secure communication, and the low-power modes enable battery-powered operation for years. The STM32L162RET6's 512 KB Flash provides ample space for firmware and data logging. Its multiple communication interfaces allow connection to various sensors and radios. Compared to other MCUs, the STM32L162RET6 offers a good balance of performance, power, and security, making it ideal for edge devices in smart agriculture, smart city, and industrial IoT.
Recommandé
Portable Consumer Electronics
The STM32L162RET6 is used in portable consumer electronics such as fitness trackers, smartwatches, and remote controls. Its ultra-low power consumption is essential for battery-powered devices that need to last weeks or months. The integrated LCD controller can drive small displays, and the USB interface allows charging and data transfer. The AES encryption protects user data. In a fitness tracker, the MCU reads accelerometer data, processes steps, and displays them on an LCD. The low-power modes allow the device to run for weeks on a small battery. The STM32L162RET6's small package and rich peripheral set make it a versatile choice for consumer devices.
Recommandé
Human-Machine Interface (HMI)
The STM32L162RET6 is suitable for HMI applications such as control panels and smart home displays. Its integrated LCD controller supports up to 8x40 segments, enabling direct drive of alphanumeric displays without external drivers. The USB interface allows connection to a host for configuration. The AES encryption secures communication in smart home systems. In a typical HMI, the MCU reads user inputs from buttons or touch sensors, updates the display, and communicates with other devices. The low-power modes allow the device to remain in standby when not in use, saving energy. The STM32L162RET6's rich peripheral set and low power consumption make it an excellent choice for HMI applications.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour STM32L162RET6 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | STM32L162RCT6 | STM32L152RET6 | STM32L151RET6 | STM32L162RDT6 | STM32L162R8T6 |
|---|---|---|---|---|---|---|
| Package | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 | LQFP64 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Flash Memory | 512 KB | 256 KB | 512 KB | 512 KB | 384 KB | 128 KB |
| SRAM | 80 KB | 32 KB | 80 KB | 80 KB | 48 KB | 16 KB |
| AES Encryption | Yes | Yes | No | No | Yes | Yes |
| LCD Controller | Yes | Yes | Yes | No | Yes | Yes |
| Max Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Standby Current | 0.3 uA | 0.3 uA | 0.3 uA | 0.3 uA | 0.3 uA | 0.3 uA |
Principaux différenciateurs
- Hardware AES-128 encryption (vs STM32L152RET6)
- 512 KB Flash memory (vs STM32L162RCT6)
- Integrated LCD controller (vs STM32L151RET6)
Notes de conception
For ultra-low-power operation, use the low-power modes effectively. In Standby mode, the STM32L162RET6 consumes only 0.3 uA. To achieve this, disable the RTC and all peripherals, and configure the wake-up sources properly. Use the Low-power Run mode for tasks that require the CPU but at reduced clock speed to minimize current. Ensure the supply voltage is within 1.8V to 3.6V and decouple each VDD pin with a 100 nF capacitor and a 4.7 uF bulk capacitor.
Place decoupling capacitors close to the power pins. For the LQFP64 package, place a 100 nF capacitor near each VDD/VSS pair and a 4.7 uF capacitor at the main supply entry. Keep the analog supply (VDDA) separate from digital supply with a ferrite bead to reduce noise. Ensure the ground plane is continuous under the MCU to minimize EMI and provide a low-impedance return path.
Do not exceed the absolute maximum ratings, especially the supply voltage (3.6V) and the voltage on any pin (VDD+0.3V). When using the ADC, ensure the analog reference voltage is stable and filtered. For USB operation, use a 1.5 kOhm pull-up on the D+ line and ensure the VBUS is within spec. Also, configure the clock source correctly; the internal HSI RC oscillator is less accurate than an external crystal, which may be required for USB or precise timing.
Informations de conformité
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; for automotive, consider STM32L1 series with AEC-Q100 option.
