STMicroelectronics

STM8S207RBT3TR - 24MHz 128KB 8-Bit MCU | STMicroelectronics (Tape & Reel)

Référence : STM8S207RBT3TR ✓ Actif
64-LQFP Package 24 MHz Speed 128 KB Memory
MOQ : 1 |

STM8S207RBT3TR Présentation

The STMicroelectronics STM8S207RBT3TR is an 8-bit STM8S performance-line microcontroller with a 24 MHz CPU, 128 KB of Flash program memory and a 64-LQFP package measuring 10 x 10 mm. It belongs to the STM8S207RB device family and is positioned for embedded control applications requiring embedded Flash memory, a broad peripheral set and an established 8-bit architecture.

A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, communication peripherals and general-purpose I/O. The STM8S family follows the hierarchy microcontroller > embedded controller > semiconductor. STM8 devices combine an 8-bit CPU with peripherals that can control motors, read sensors, operate communication interfaces and manage digital equipment without requiring a separate processor and supporting logic.

The STM8S207RBT3TR provides 128 KB of Flash organized as 128K x 8 and operates at up to 24 MHz. STMicroelectronics describes it as part of the STM8S20xxx performance line, whose devices offer program-memory configurations from 32 to 128 KB. Its 64-LQFP package provides 64 electrical contacts and is suitable for compact industrial, consumer, communications and automation equipment.

The STM8S207RB family is designed around an 8-bit CPU with dedicated peripheral resources for embedded control. The 24 MHz maximum operating frequency supports faster control loops and peripheral servicing than lower-frequency members of the STM8 family, while 128 KB of embedded Flash allows larger application code, bootloader logic and configuration data to be consolidated into one device.

Typical applications include industrial control modules, motor and actuator controllers, communications equipment, sensor interfaces, appliance controllers and compact embedded platforms. The device is especially relevant where 128 KB of embedded program memory simplifies firmware deployment while the 64-LQFP package provides a conventional surface-mount footprint suitable for PCB assembly.

PCB design should preserve the exact pin assignments, power requirements, decoupling and clock configuration defined in the STMicroelectronics DS5839 datasheet. Firmware migrations between orderable STM8S207RB variants should verify the temperature grade, package suffix and peripheral configuration before substitution.

This page combines the manufacturer’s STM8S207RB family information with exact STM8S207RBT3TR ordering data, package details, application guidance and engineering-focused design considerations. It helps buyers identify the correct MCU while making pin, memory, package and sourcing decisions with fewer document lookups.

Alternatives de remplacement direct pour STM8S207RBT3TR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec STM8S207RBT3TR (même facteur de forme et même empreinte) — différant par Series.

STMicroelectronics
Series: STM8S performance line
Comparer avec STM8S207RBT3TR →

STM8S207RBT6

✅ Remplacement direct ⚠️ Spécifications non vérifiées
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
8-bit RISC microcontroller · STM8S performance line · 24 MHz · 20 MIPS at 24 MHz · 128 KB · 128K x 8 bits · Harvard architecture with 3-stage pipeline

Contactez-nous pour le prix

Voir la fiche technique →

STM8S207RBT6

✅ Remplacement direct
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
8-bit RISC microcontroller · STM8S performance line · 24 MHz · 20 MIPS at 24 MHz · 128 KB · 128K x 8 bits · Harvard architecture with 3-stage pipeline

Contactez-nous pour le prix

Voir la fiche technique →

STM8S207RBT3TR Valeurs maximales et caractéristiques électriques

Product Type 8-bit microcontroller
Product Line STM8S performance line
Series STM8S20xxx
Device Family STM8S207RB
Maximum CPU Frequency 24 MHz
CPU Architecture 8-bit
Flash Program Memory 128 KB
Flash Memory Organization 128K x 8
Program Memory Range Across STM8S20xxx Family 32 KB to 128 KB
Device Density Classification High-density device
Package Type 64-LQFP
Package Dimensions 10 x 10 mm
Total Pin Count 64 pins
Type de montage Surface mount
Automotive Qualification Automotive
Program Memory Type Embedded Flash

Guide de configuration des broches du STM8S207RBT3TR 10 x 10 mm

Configuration des broches du STM8S207RBT3TR (boîtier 10 x 10 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 10 x 10 mm pour le STM8S207RBT3TR

Aucune donnée de brochage détaillée disponible pour STM8S207RBT3TR.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

STM8S207RBT3TR convient pour 6 applications: Industrial Equipment Controller, Motor and Actuator Control, Sensor Interface and Acquisition Module, Communications Equipment, Appliance and Embedded Control, Automotive Electronic Control Unit.

🏭

Industrial Equipment Controller

The STM8S207RBT3TR fits compact industrial controllers that require deterministic control logic and more onboard program memory than entry-level STM8 devices provide. Its 24 MHz 8-bit CPU supports responsive state-machine execution, while 128 KB of embedded Flash consolidates application code, parameter handling, diagnostics and bootloader support into one package. The 64-LQFP format provides a conventional surface-mount footprint with 64 contacts for external sensors, actuators and communications. Before circuit release, assign every pin from the DS5839 pin-description table, route clean supply and ground connections, and validate the operating environment against the device’s specified voltage and temperature limits. The result is a compact control platform suited to machinery interfaces, distributed I/O modules and production equipment where firmware complexity exceeds very small microcontroller configurations.

🔧

Motor and Actuator Control

The STM8S207RBT3TR is applicable to compact motor and actuator controllers where an 8-bit MCU must manage timing, sequencing and protection logic. Its maximum CPU frequency of 24 MHz allows faster execution of control tasks than lower-clock general-purpose 8-bit devices, while 128 KB of Flash provides room for motion tables, calibration data, fault handling and communication services. The MCU can serve as the supervisory controller alongside power switches, gate drivers, position sensors and current-sensing circuitry. The final design must map timer-capable pins, external interrupts and analog inputs from the manufacturer’s peripheral tables rather than infer their positions from the 64-pin count. Confirm the STMicroelectronics DS5839 timing limits and electrical characteristics, then validate thermal performance and fault behavior at the highest expected load.

🧩

Sensor Interface and Acquisition Module

The STM8S207RBT3TR supports compact sensor-interface modules that combine acquisition, filtering, calibration and local control. The 24 MHz CPU provides sufficient execution bandwidth for structured sampling routines and communication handling, while 128 KB of embedded Flash can retain conversion parameters, calibration coefficients and diagnostic history. Its 64-LQFP package exposes a larger pin set than small-outline MCU options and can accommodate digital sensors, communication transceivers, status indicators and external memory. Engineering review should verify the required timer, serial-interface and analog resources in the DS5839 tables, then assign pins according to the package drawing. Use the application’s required voltage and temperature limits to confirm that the exact T3 suffix is appropriate for laboratory, industrial or automotive deployment.

🌐

Communications Equipment

The STM8S207RBT3TR can serve as the supervisory controller in communications equipment where local protocol handling, configuration storage and status reporting must be integrated into a compact board. The 8-bit STM8 core runs at up to 24 MHz, and the 128 KB Flash capacity supports protocol state machines, bootloaders, diagnostics and user-interface logic. The 64-LQFP footprint is practical for boards requiring multiple peripheral connections alongside a communications transceiver. Designers should verify the exact serial, timer, interrupt and DMA resources in the STMicroelectronics DS5839 documentation and observe the documented clock and pin multiplexing rules. Signal integrity of external interfaces, ground-return planning and power-supply sequencing are especially important when the MCU communicates with noisy power stages or long external lines.

📱

Appliance and Embedded Control

The STM8S207RBT3TR is suitable for appliance controllers and embedded products that combine user controls, sensors, relays or communication interfaces in a single embedded platform. Its 128 KB of Flash provides space for operating logic, product variants, calibration and field-update support, while the 24 MHz CPU supports responsive keypad, display and motor-control tasks. The 64-LQFP package in a 10 x 10 mm outline supports compact, high-density PCB layouts and automated assembly. During design, follow the DS5839 power-pin recommendations, decoupling guidance and clock requirements exactly, and do not assign peripheral signals until they have been cross-checked against the package pinout. The finished design should also undergo functional testing across reset, brownout, EMC and worst-case operating conditions relevant to the appliance.

🚗

Automotive Electronic Control Unit

The STM8S207RBT3TR is identified for automotive applications and is suitable for electronic control units that combine 8-bit processing with 128 KB of embedded Flash. The device can support body, accessory, sensor and actuator control functions where compact packaging, deterministic execution and embedded code storage are important. Its 64-LQFP package offers ample connectivity for switches, sensors, communications links and diagnostic interfaces. Automotive qualification must be established from the manufacturer documentation for the exact ordering code rather than inferred solely from the automotive descriptor. Engineering teams should also review the DS5839 electrical limits, pin assignments and peripheral constraints, implement suitable power protection, validate electromagnetic compatibility, and confirm that the production MCU suffix matches the vehicle program’s sourcing and traceability requirements.

Récapitulatif des produits recommandés

STM8S207RB Manufacturer product family for the target MCU Utilisé dans : Industrial Equipment Controller, Motor and Actuator Control, Sensor Interface and Acquisition Module, Communications Equipment, Appliance and Embedded Control, Automotive Electronic Control Unit STM8S207RBT3TR STMicroelectronics Utilisé dans : Industrial Equipment Controller, Motor and Actuator Control, Sensor Interface and Acquisition Module, Communications Equipment, Appliance and Embedded Control, Automotive Electronic Control Unit
What is the STM8S207RBT3TR?
The STM8S207RBT3TR is an STMicroelectronics 8-bit STM8S performance-line microcontroller rated for up to 24 MHz, with 128 KB of embedded Flash and a 64-LQFP package. According to the STMicroelectronics DS5839 datasheet, the STM8S20xxx family spans 32 KB to 128 KB of Flash and includes high-density devices such as the STM8S207RB family.
What are the key specifications of STM8S207RBT3TR?
The STM8S207RBT3TR combines a 24 MHz maximum CPU frequency, 128 KB of 128K x 8 Flash, an 8-bit CPU and a 64-LQFP package measuring 10 x 10 mm. These figures place it in STMicroelectronics’ STM8S20xxx performance line. The manufacturer describes STM8S207RB as a high-density member of the STM8S family reference manual.
Where can I download the STM8S207RBT3TR datasheet PDF?
The official STM8S207RBT3TR datasheet PDF is available from STMicroelectronics through the DS5839 document linked on this page. It contains the STM8S20xxx features, pinout, electrical characteristics, mechanical data and ordering information. The manufacturer product page for STM8S207RB provides a second route to the same family documentation.
Where can I find the STM8S207RBT3TR pinout?
The STM8S207RBT3TR pinout is located in the pinout section of the STMicroelectronics DS5839 datasheet for the STM8S20xxx family. The device uses a 64-LQFP package, so the package drawing and pin-description table must be read together before assigning power, ground, reset, clock and I/O connections on the PCB.
What is the difference between STM8S207RBT3TR and STM8S207RBT3TRTR?
Both STM8S207RBT3TR and STM8S207RBT3TRTR are identified as STMicroelectronics 8-bit, 24 MHz, 128 KB Flash devices in 64-LQFP packages. The T3TR ordering code denotes a tape-and-reel orderable form, whereas the target T3 ordering code requires attention to the manufacturer ordering table. Confirm the exact suffix and reel presentation before procurement.
Is STM8S207RBT3TR suitable for industrial control applications?
The STM8S207RBT3TR is suitable for many embedded-control designs because it combines a 24 MHz 8-bit CPU with 128 KB of embedded Flash in a 64-LQFP package. Its 10 x 10 mm footprint supports compact controller boards. Industrial suitability still depends on the device’s specified temperature range, EMC environment, power requirements and qualification for the deployed equipment.
What can replace the STM8S207RBT3TR?
No drop-in replacement can be confirmed from the available cross-reference information. A valid replacement must match the 64-LQFP footprint, pin assignments, 24 MHz class operation, 128 KB Flash organization, memory map, peripherals, voltage limits and temperature grade. Packaging-only order codes do not establish a different silicon alternative.
Is STM8S207RBT3TR the same as STM8S207RBT3TRTR?
The STM8S207RBT3TR and STM8S207RBT3TRTR describe closely related 64-LQFP orderable configurations with an 8-bit CPU, 24 MHz maximum frequency and 128 KB Flash. They are not automatically identical at purchasing level because the final ordering code controls the packing form. Review the STMicroelectronics ordering information for the exact mechanical presentation.
STM8S207RBT3TR vs STM8S207RBT3TRTR - which is better for production?
Choose the suffix that matches the PCB assembly and incoming process rather than treating the two codes as interchangeable purchasing labels. Both listings identify a 64-LQFP STM8S207RB configuration with a 24 MHz CPU and 128 KB Flash. For high-volume reel-fed assembly, STM8S207RBT3TRTR is generally the relevant tape-and-reel ordering option, subject to manufacturer confirmation.
When should I choose STM8S207RBT3TR over a different STM8S207RB order code?
Choose STM8S207RBT3TR when its exact T3 ordering code matches the required temperature grade, package, and delivery configuration. Compare the complete ordering suffix and reel orientation before releasing a BOM. The MCU family shares core hardware in many cases, but packaging, grade, and lot-control requirements can make the ordering suffix decision-critical.
Is STM8S207RBT3TR suitable for motor control and actuator systems?
The STM8S207RBT3TR can serve as the control processor in motor-control and actuator systems because it operates at up to 24 MHz and includes 128 KB of embedded Flash for control and sequencing firmware. Its exact timer outputs, analog functions and external-interface capabilities must be assigned from the DS5839 pin and peripheral tables before the architecture is approved.
Where can I buy STM8S207RBT3TR online?
Use the Request a Quote form on this page to request STM8S207RBT3TR pricing, current inventory, lead time and delivery options from XAIPART. The component is specified as an STMicroelectronics 64-LQFP MCU with a 24 MHz CPU and 128 KB Flash. A firm quote should reflect the requested quantity, packing form and date.
What is the price of STM8S207RBT3TR?
Current STM8S207RBT3TR pricing depends on quantity, inventory, order form and requested delivery date. Submit the required quantity and packing preference through the Request a Quote form on this page for a current offer. The structured quote process avoids presenting a stale or ambiguous amount for this orderable device configuration.
What is the lead time for STM8S207RBT3TR?
The current lead time for STM8S207RBT3TR should be confirmed through the Request a Quote form on this page using the required order quantity and delivery date. Lead time can change with manufacturer and distributor inventory, component allocation, and assembly packaging. The form provides a current sourcing response instead of an outdated scheduling estimate.
Is STM8S207RBT3TR in stock?
Check current STM8S207RBT3TR availability by submitting the requested quantity through the Request a Quote form on this page. Stock status is quantity-dependent and should be confirmed at the time of quotation. Include the desired package and delivery conditions so the response reflects the exact T3 orderable configuration.
What programming tools are compatible with STM8S207RBT3TR?
The STM8S207RBT3TR is compatible with an STM8-compatible programming and debugging toolchain that supports the STM8S20xxx family. According to STMicroelectronics DS5839, this device belongs to the high-density STM8S family. Confirm debugger connection signals, boot mode, programming voltage and driver support against the selected tool’s compatibility list before production use.
Does STM8S207RBT3TR meet RoHS and automotive qualification requirements?
STM8S207RBT3TR is identified as an automotive STM8S207RB configuration, but the manufacturer’s complete ordering table and product documentation must be consulted for the exact qualification statement. RoHS, REACH and AEC-Q100 status for this precise suffix are not stated in the available product summaries, so compliance should be confirmed from the manufacturer’s declaration or material-compliance documentation.

Données de référence d'ingénierie pour STM8S207RBT3TR — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the STM8S207RBT3TR when the design requires STMicroelectronics’ STM8S207RB 8-bit MCU, a 24 MHz maximum CPU frequency, 128 KB of embedded Flash and a 64-LQFP footprint. It is particularly suitable for compact industrial, appliance, sensor-interface, communications and automotive control products where embedded Flash and a conventional high-pin-count package are useful. Select STM8S207RBT3TRTR when the manufacturer’s ordering table confirms that the tape-and-reel form matches the production process; it retains the same stated 8-bit, 24 MHz and 128 KB configuration. Do not choose either ordering code solely from its pin count. Verify temperature grade, supply limits, peripheral availability, memory organization, qualification status and packaging against DS5839 and the current manufacturer product page. No distinct drop-in silicon alternative is confirmed by the available cross-reference information, so an engineering substitution should not be made without complete pin, electrical, peripheral and qualification equivalence.

Comparaison avec les alternatives

Paramètre Ce produit STM8S207RBT3TRTR
Manufacturer STMicroelectronics STMicroelectronics
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
CPU Architecture 8-bit 8-bit
Maximum CPU Frequency 24 MHz 24 MHz
Flash Program Memory 128 KB 128 KB
Flash Organization 128K x 8 128K x 8
Device Family STM8S207RB STM8S207RB

Principaux différenciateurs

  • Combines 24 MHz processing with 128 KB of embedded Flash (vs STM8S207RBT3TRTR)
  • Uses a compact 10 x 10 mm surface-mount package (vs STM8S207RBT3TRTR)
  • Exact T3 ordering configuration supports controlled BOM management (vs STM8S207RBT3TRTR)

Notes de conception

Assign signals directly from the STMicroelectronics DS5839 pinout and pin-description tables before placing the 64-LQFP footprint. Preserve the power and ground assignments exactly, including any analog or digital supply distinctions shown by the manufacturer. Keep oscillator components, decoupling capacitors and reset-network connections close to their associated pins. Because the T3 suffix includes a temperature-grade code, confirm that the PCB footprint and BOM ordering information match the selected package rather than relying only on the pin count.

Calculate the MCU rail and external load-current budget from the electrical limits in DS5839 and the worst-case operating condition. Place the required bypass capacitors at the supply pins using the manufacturer’s recommended layout, and account for voltage drop between the source and the device. Where switching converters or motor drivers share the board, separate sensitive return paths and verify startup, reset and brownout behavior. Do not select external component values without the exact pinout and electrical-characteristics information.

Avoid treating STM8S207RBT3TR and STM8S207RBT3TRTR as separate silicon replacements without checking the complete STMicroelectronics ordering table. The T3TR form denotes a different orderable packaging configuration even though both are identified as 64-LQFP devices with a 24 MHz CPU and 128 KB Flash. Verify reel orientation, temperature grade, packing quantity and assembly requirements. A similarly named part is not a qualified substitute unless its pinout, electrical limits, peripherals and qualification match the target design.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The target is identified as an automotive STM8S207RB configuration, but exact RoHS, REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals declarations for the STM8S207RBT3TR ordering code require confirmation from STMicroelectronics compliance documentation.

Recherches associées

STM8S207RBT3TR datasheet STM8S207RBT3TR pinout STM8S207RBT3TR datasheet pdf STM8S207RBT3TR specifications STM8S207RBT3TR 64 LQFP STM8S207RBT3TR 24MHz 128KB STM8S207RBT3TR equivalent STM8S207RBT3TR replacement STM8S207RBT3TR vs STM8S207RBT3TRTR STM8S207RBT3TR price STM8S207RBT3TR stock STMicroelectronics STM8S207RBT3TR

Composants & termes associés

STMicroelectronics STM8S207RBT3TR STM8S207RB STM8S20xxx STM8S family 8-bit microcontroller embedded controller semiconductor 24 MHz CPU 128 KB Flash 128K x 8 memory organization 64-LQFP LQFP package family surface-mount package automotive microcontroller embedded Flash memory high-density STM8 device DS5839 datasheet industrial control motor control sensor interface communications equipment appliance control RoHS REACH AEC-Q100
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ