STM8S207RBT3TR - 24MHz 128KB 8-Bit MCU | STMicroelectronics (Tape & Reel)
MPN: STM8S207RBT3TR ✓ AktifSTM8S207RBT3TR Ringkasan
A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, communication peripherals and general-purpose I/O. The STM8S family follows the hierarchy microcontroller > embedded controller > semiconductor. STM8 devices combine an 8-bit CPU with peripherals that can control motors, read sensors, operate communication interfaces and manage digital equipment without requiring a separate processor and supporting logic.
The STM8S207RBT3TR provides 128 KB of Flash organized as 128K x 8 and operates at up to 24 MHz. STMicroelectronics describes it as part of the STM8S20xxx performance line, whose devices offer program-memory configurations from 32 to 128 KB. Its 64-LQFP package provides 64 electrical contacts and is suitable for compact industrial, consumer, communications and automation equipment.
The STM8S207RB family is designed around an 8-bit CPU with dedicated peripheral resources for embedded control. The 24 MHz maximum operating frequency supports faster control loops and peripheral servicing than lower-frequency members of the STM8 family, while 128 KB of embedded Flash allows larger application code, bootloader logic and configuration data to be consolidated into one device.
Typical applications include industrial control modules, motor and actuator controllers, communications equipment, sensor interfaces, appliance controllers and compact embedded platforms. The device is especially relevant where 128 KB of embedded program memory simplifies firmware deployment while the 64-LQFP package provides a conventional surface-mount footprint suitable for PCB assembly.
PCB design should preserve the exact pin assignments, power requirements, decoupling and clock configuration defined in the STMicroelectronics DS5839 datasheet. Firmware migrations between orderable STM8S207RB variants should verify the temperature grade, package suffix and peripheral configuration before substitution.
This page combines the manufacturer’s STM8S207RB family information with exact STM8S207RBT3TR ordering data, package details, application guidance and engineering-focused design considerations. It helps buyers identify the correct MCU while making pin, memory, package and sourcing decisions with fewer document lookups.
Pilihan pengganti yang segera untuk STM8S207RBT3TR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM8S207RBT3TR (sama faktor bentuk dan kaki) — berbeza dalam Series.
STM8S207RBT6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →STM8S207RBT6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM8S207RBT3TR Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit microcontroller |
| Product Line | STM8S performance line |
| Series | STM8S20xxx |
| Device Family | STM8S207RB |
| Maximum CPU Frequency | 24 MHz |
| CPU Architecture | 8-bit |
| Flash Program Memory | 128 KB |
| Flash Memory Organization | 128K x 8 |
| Program Memory Range Across STM8S20xxx Family | 32 KB to 128 KB |
| Device Density Classification | High-density device |
| Package Type | 64-LQFP |
| Package Dimensions | 10 x 10 mm |
| Total Pin Count | 64 pins |
| Jenis Pemasangan | Surface mount |
| Automotive Qualification | Automotive |
| Program Memory Type | Embedded Flash |
Panduan Konfigurasi Pin STM8S207RBT3TR 10 x 10 mm
Konfigurasi pin untuk STM8S207RBT3TR (10 x 10 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM8S207RBT3TR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM8S207RBT3TR patut untuk 6 aplikasis: Industrial Equipment Controller, Motor and Actuator Control, Sensor Interface and Acquisition Module, Communications Equipment, Appliance and Embedded Control, Automotive Electronic Control Unit.
Industrial Equipment Controller
The STM8S207RBT3TR fits compact industrial controllers that require deterministic control logic and more onboard program memory than entry-level STM8 devices provide. Its 24 MHz 8-bit CPU supports responsive state-machine execution, while 128 KB of embedded Flash consolidates application code, parameter handling, diagnostics and bootloader support into one package. The 64-LQFP format provides a conventional surface-mount footprint with 64 contacts for external sensors, actuators and communications. Before circuit release, assign every pin from the DS5839 pin-description table, route clean supply and ground connections, and validate the operating environment against the device’s specified voltage and temperature limits. The result is a compact control platform suited to machinery interfaces, distributed I/O modules and production equipment where firmware complexity exceeds very small microcontroller configurations.
Disebarkan
Motor and Actuator Control
The STM8S207RBT3TR is applicable to compact motor and actuator controllers where an 8-bit MCU must manage timing, sequencing and protection logic. Its maximum CPU frequency of 24 MHz allows faster execution of control tasks than lower-clock general-purpose 8-bit devices, while 128 KB of Flash provides room for motion tables, calibration data, fault handling and communication services. The MCU can serve as the supervisory controller alongside power switches, gate drivers, position sensors and current-sensing circuitry. The final design must map timer-capable pins, external interrupts and analog inputs from the manufacturer’s peripheral tables rather than infer their positions from the 64-pin count. Confirm the STMicroelectronics DS5839 timing limits and electrical characteristics, then validate thermal performance and fault behavior at the highest expected load.
Disebarkan
Sensor Interface and Acquisition Module
The STM8S207RBT3TR supports compact sensor-interface modules that combine acquisition, filtering, calibration and local control. The 24 MHz CPU provides sufficient execution bandwidth for structured sampling routines and communication handling, while 128 KB of embedded Flash can retain conversion parameters, calibration coefficients and diagnostic history. Its 64-LQFP package exposes a larger pin set than small-outline MCU options and can accommodate digital sensors, communication transceivers, status indicators and external memory. Engineering review should verify the required timer, serial-interface and analog resources in the DS5839 tables, then assign pins according to the package drawing. Use the application’s required voltage and temperature limits to confirm that the exact T3 suffix is appropriate for laboratory, industrial or automotive deployment.
Disebarkan
Communications Equipment
The STM8S207RBT3TR can serve as the supervisory controller in communications equipment where local protocol handling, configuration storage and status reporting must be integrated into a compact board. The 8-bit STM8 core runs at up to 24 MHz, and the 128 KB Flash capacity supports protocol state machines, bootloaders, diagnostics and user-interface logic. The 64-LQFP footprint is practical for boards requiring multiple peripheral connections alongside a communications transceiver. Designers should verify the exact serial, timer, interrupt and DMA resources in the STMicroelectronics DS5839 documentation and observe the documented clock and pin multiplexing rules. Signal integrity of external interfaces, ground-return planning and power-supply sequencing are especially important when the MCU communicates with noisy power stages or long external lines.
Disebarkan
Appliance and Embedded Control
The STM8S207RBT3TR is suitable for appliance controllers and embedded products that combine user controls, sensors, relays or communication interfaces in a single embedded platform. Its 128 KB of Flash provides space for operating logic, product variants, calibration and field-update support, while the 24 MHz CPU supports responsive keypad, display and motor-control tasks. The 64-LQFP package in a 10 x 10 mm outline supports compact, high-density PCB layouts and automated assembly. During design, follow the DS5839 power-pin recommendations, decoupling guidance and clock requirements exactly, and do not assign peripheral signals until they have been cross-checked against the package pinout. The finished design should also undergo functional testing across reset, brownout, EMC and worst-case operating conditions relevant to the appliance.
Disebarkan
Automotive Electronic Control Unit
The STM8S207RBT3TR is identified for automotive applications and is suitable for electronic control units that combine 8-bit processing with 128 KB of embedded Flash. The device can support body, accessory, sensor and actuator control functions where compact packaging, deterministic execution and embedded code storage are important. Its 64-LQFP package offers ample connectivity for switches, sensors, communications links and diagnostic interfaces. Automotive qualification must be established from the manufacturer documentation for the exact ordering code rather than inferred solely from the automotive descriptor. Engineering teams should also review the DS5839 electrical limits, pin assignments and peripheral constraints, implement suitable power protection, validate electromagnetic compatibility, and confirm that the production MCU suffix matches the vehicle program’s sourcing and traceability requirements.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM8S207RBT3TR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM8S207RBT3TRTR |
|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| CPU Architecture | 8-bit | 8-bit |
| Maximum CPU Frequency | 24 MHz | 24 MHz |
| Flash Program Memory | 128 KB | 128 KB |
| Flash Organization | 128K x 8 | 128K x 8 |
| Device Family | STM8S207RB | STM8S207RB |
Penyeberangsung Jelas
- Combines 24 MHz processing with 128 KB of embedded Flash (vsSTM8S207RBT3TRTR)
- Uses a compact 10 x 10 mm surface-mount package (vsSTM8S207RBT3TRTR)
- Exact T3 ordering configuration supports controlled BOM management (vsSTM8S207RBT3TRTR)
Catatan Desain
Assign signals directly from the STMicroelectronics DS5839 pinout and pin-description tables before placing the 64-LQFP footprint. Preserve the power and ground assignments exactly, including any analog or digital supply distinctions shown by the manufacturer. Keep oscillator components, decoupling capacitors and reset-network connections close to their associated pins. Because the T3 suffix includes a temperature-grade code, confirm that the PCB footprint and BOM ordering information match the selected package rather than relying only on the pin count.
Calculate the MCU rail and external load-current budget from the electrical limits in DS5839 and the worst-case operating condition. Place the required bypass capacitors at the supply pins using the manufacturer’s recommended layout, and account for voltage drop between the source and the device. Where switching converters or motor drivers share the board, separate sensitive return paths and verify startup, reset and brownout behavior. Do not select external component values without the exact pinout and electrical-characteristics information.
Avoid treating STM8S207RBT3TR and STM8S207RBT3TRTR as separate silicon replacements without checking the complete STMicroelectronics ordering table. The T3TR form denotes a different orderable packaging configuration even though both are identified as 64-LQFP devices with a 24 MHz CPU and 128 KB Flash. Verify reel orientation, temperature grade, packing quantity and assembly requirements. A similarly named part is not a qualified substitute unless its pinout, electrical limits, peripherals and qualification match the target design.
Maklumat Kesediaan
The target is identified as an automotive STM8S207RB configuration, but exact RoHS, REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals declarations for the STM8S207RBT3TR ordering code require confirmation from STMicroelectronics compliance documentation.