Microchip Technology

SY87725LHY - 4-Bit 2.5G ONU SerDes | Microchip

Référence : SY87725LHY ✓ Actif
3.15 V to 3.45 V Vdss 64-lead TQFP with exposed pad Package
MOQ : 1 |

SY87725LHY Présentation

The Microchip Technology SY87725LHY is a 3.3 V single-chip LVDS transceiver integrating a four-bit serializer and deserializer for optical access networks. It supports downstream rates of 2.5 Gbit/s, 1.25 Gbit/s, and 625 Mbit/s, along with upstream rates of 1.25 Gbit/s, 625 Mbit/s, and 156 Mbit/s. The device is packaged in a 64-lead TQFP with exposed pad measuring 10 mm by 10 mm.

A SerDes transceiver is an interface IC that converts parallel data into a high-speed serial stream and converts a received serial stream back into parallel data. In the broader semiconductor hierarchy, the SY87725LHY belongs to the interface transceiver class, then to high-speed communications ICs, and ultimately to the semiconductor category. Optical network units use this type of interface to connect a processor or network controller to a PON signal path while reducing parallel data-bus pin requirements.

The device's principal functions include four-bit parallel-to-serial and serial-to-parallel conversion, LVDS signaling, downstream-channel rate selection, and upstream-channel rate support. Its listed 3.3 V operating range spans 3.15 V to 3.45 V. The available technical information identifies the SY87725LHY specifically for PON and optical access applications rather than general-purpose board-to-board LVDS links.

The four-bit interface provides a practical balance between host throughput and package complexity. At the highest listed downstream rate of 2.5 Gbit/s, the serial output supports substantially greater line-rate capability than the 1.25 Gbit/s downstream mode. Upstream operation is listed from 156 Mbit/s through 1.25 Gbit/s, allowing a network design to accommodate different service directions according to PON architecture and link requirements.

Typical uses include GPON-class ONU signal paths, XGS-PON-oriented downstream links, PON media-conversion assemblies, optical network terminal equipment, and central-office line-card interfaces where a compact four-bit SerDes connects parallel PHY logic to high-speed serial channels. The single-chip integration reduces the number of separate conversion and interface functions required around the system controller.

Layout is especially important because LVDS and multi-gigabit SerDes interfaces can be sensitive to return-path discontinuities, imperfect reference-clock distribution, and uncontrolled differential impedance. Place decoupling capacitors close to the supply pins, maintain a continuous ground plane, and follow the manufacturer's recommended reference design for differential routing and exposed-pad connection. Confirm all rate modes with the clocking, I/O, and channel requirements of the selected PON system.

This page combines the manufacturer-derived operating details, PON rate coverage, package information, sourcing workflow, and engineering guidance needed to evaluate the SY87725LHY. It also distinguishes the exact ordered MPN from related catalog identifiers and provides explicit selection criteria for designing a new optical access interface or assessing an existing board revision.

Alternatives de remplacement direct pour SY87725LHY — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

SY87725LHY Spécifications

Device Type Single-chip LVDS transceiver
Serializer/Deserializer Width 4 bit
Supply Voltage Range 3.15 V to 3.45 V
Nominal Supply Voltage 3.3 V
Maximum Downstream Data Rate 2.5 Gbit/s
Supported Downstream Data Rates 2.5 Gbit/s, 1.25 Gbit/s, and 625 Mbit/s
Maximum Upstream Data Rate 1.25 Gbit/s
Supported Upstream Data Rates 1.25 Gbit/s, 625 Mbit/s, and 156 Mbit/s
Signal Protocol LVDS
Primary Application Passive optical network and optical access
Boîtier 64-lead TQFP with exposed pad
Package Dimensions 10 mm x 10 mm
Plage de température de fonctionnement -40 °C to +85 °C
Type de montage Surface mount

Guide de configuration des broches du SY87725LHY 10 mm x 10 mm

Configuration des broches du SY87725LHY (boîtier 10 mm x 10 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 10 mm x 10 mm pour le SY87725LHY

Aucune donnée de brochage détaillée disponible pour SY87725LHY.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

SY87725LHY convient pour 6 applications: GPON Optical Network Terminal, XGS-PON Downstream Interface, PON Media Converter, Optical Line-Card Interface, High-Speed Parallel-to-Serial Bridge, Optical Access Test Equipment.

🌐

GPON Optical Network Terminal

The SY87725LHY fits the SerDes section of a GPON-oriented optical network terminal because it supports downstream rates of 1.25 Gbit/s and 625 Mbit/s as well as upstream operation through 1.25 Gbit/s. The four-bit conversion interface connects parallel network-controller logic to a high-speed differential channel without requiring separate serializer and deserializer packages. Its 3.15 V to 3.45 V supply range is centered on 3.3 V optical-access equipment. Confirm the selected PON mode, reference-clock architecture, and controller pin assignment against the manufacturer datasheet before finalizing the schematic.

⚡

XGS-PON Downstream Interface

For an XGS-PON-class downstream path, the SY87725LHY can use its 2.5 Gbit/s downstream mode to move high-rate serialized traffic between parallel logic and the optical-transceiver signal chain. The four-bit internal interface provides a structured division of data between parallel and serial domains, while the 3.3 V supply operation suits compact line-card electronics. The implementation must preserve the manufacturer reference design's differential impedance, clocking, decoupling, and exposed-pad grounding to maintain signal integrity at the highest listed rate.

🔧

PON Media Converter

A PON media converter can place the SY87725LHY between a parallel FPGA or network controller and a high-speed differential PHY stage. The converter benefits from the device's 2.5 Gbit/s downstream rate, 1.25 Gbit/s maximum upstream rate, and four-bit parallel interface. Because the same package supports multiple line rates, one board architecture may cover several PON service modes. Validate each supported rate with the intended reference clock and magnetics or optical-interface circuitry rather than treating all rate settings as interchangeable.

🖥️

Optical Line-Card Interface

The SY87725LHY is applicable to central-office and access-network line cards that convert parallel control or traffic data into LVDS serial channels. Its highest downstream rate of 2.5 Gbit/s supports high-throughput downstream traffic, while the 625 Mbit/s and 156 Mbit/s upstream options accommodate lower-rate return paths. Integration in a 64-lead TQFP exposed-pad package supports compact multilayer PCB designs, provided the thermal pad receives uninterrupted ground-plane connection and the high-speed nets follow controlled impedance routing.

📡

High-Speed Parallel-to-Serial Bridge

The SY87725LHY can serve as the conversion stage in a high-speed parallel-to-serial bridge when a controller exposes four parallel data bits but requires a differential serial link. Its LVDS interface and selectable PON-oriented rates make it relevant to optical-access equipment rather than an arbitrary general-purpose communications link. System designers should verify the serializer's parallel clocking, coding, control pins, and channel polarity in the manufacturer datasheet, then implement controlled-length differential routing and a low-noise reference-clock network.

🧰

Optical Access Test Equipment

The SY87725LHY can be incorporated into optical access test equipment that must generate or analyze PON-compatible downstream and upstream traffic. Its defined rates of 2.5 Gbit/s, 1.25 Gbit/s, 625 Mbit/s, and 156 Mbit/s allow the same platform to exercise several link modes. The 3.3 V operating range and compact 10 mm by 10 mm TQFP package facilitate instrumentation, but accurate measurements still depend on a clean reference clock, controlled impedance, solid ground return paths, and calibration of the external optical and electrical test paths.

What is the SY87725LHY?
The SY87725LHY is a 3.3 V single-chip SerDes transceiver from Microchip Technology for passive optical network and optical access equipment. It integrates a four-bit serializer and deserializer, supports LVDS signaling, and operates from 3.15 V to 3.45 V. According to the manufacturer product information, the device handles downstream rates of 2.5 Gbit/s, 1.25 Gbit/s, and 625 Mbit/s plus upstream rates up to 1.25 Gbit/s.
What data rates does SY87725LHY support?
The SY87725LHY supports three downstream rates—2.5 Gbit/s, 1.25 Gbit/s, and 625 Mbit/s—and three upstream rates—1.25 Gbit/s, 625 Mbit/s, and 156 Mbit/s. According to the Microchip product description, the highest downstream mode is suitable for high-rate PON downstream channels, while the upstream modes support the lower and intermediate rates required by bidirectional optical access architectures.
What package does the SY87725LHY use?
The SY87725LHY uses a 64-lead TQFP package with an exposed pad, measuring 10 mm by 10 mm. The exposed pad is part of the thermal and electrical design and must be connected according to the manufacturer layout instructions. The package is a surface-mount format intended for compact optical network terminal and line-card equipment rather than through-hole industrial systems.
What is the operating voltage of SY87725LHY?
The SY87725LHY operates from 3.15 V to 3.45 V and is identified as a 3.3 V device. The manufacturer product information identifies this supply range for the complete transceiver. A board design should regulate the rail near 3.3 V, confirm the current drawn in each operating mode, and provide suitable local decoupling close to the device's supply pins.
Where can I download the SY87725LHY datasheet?
The SY87725LHY datasheet can be reached through the linked Microchip product listing and its associated documents tab. Use the manufacturer datasheet for the authoritative pin descriptions, reference clock requirements, electrical characteristics, timing diagrams, and recommended application circuit. The product listing identifies the IC as a single-chip LVDS transceiver in a 64-TQFP exposed-pad package for optical access and PON equipment.
Where can I find the SY87725LHY pinout?
The SY87725LHY pinout is located in the pin-description table and package drawing in the Microchip manufacturer datasheet. Use that table when assigning the 64 TQFP leads and connecting the exposed thermal pad. The public product description confirms the 64-TQFP exposed-pad format, but it does not provide a reliable lead-by-lead description, so the schematic and PCB layout should be checked directly against the datasheet.
Is the SY87725LHY suitable for PON equipment?
Yes, the SY87725LHY is specifically designed for passive optical network and optical access applications. Its four-bit SerDes supports downstream rates through 2.5 Gbit/s and upstream rates through 1.25 Gbit/s. According to the manufacturer description, this makes the device suitable for ONU and related optical interface circuitry when the system's reference clock, line coding, and signal-integrity requirements match the supported modes.
What can replace the SY87725LHY?
A drop-in replacement must use the same 64-lead TQFP exposed-pad footprint and preserve the four-bit SerDes, LVDS interface, 3.15 V to 3.45 V supply range, and required PON data rates. No additional pin-compatible replacement can be identified confidently from the manufacturer and cross-reference records reviewed. The related SY87725LHY-TR identifier represents a different catalog order code and should not be treated as a separate electrical substitute.
Is the SY87725LHY the same as SY87725LHY-TR?
The SY87725LHY and SY87725LHY-TR identify the same underlying SY87725LHY device within different order-code listings, but they should not be treated as separate drop-in alternatives. Their electrical function is tied to the same four-bit 3.3 V LVDS SerDes design. When purchasing, use the exact approved ordering code specified by the bill of materials and confirm the package, shipping form, and traceability requirements with the manufacturer.
Where can I buy the SY87725LHY online?
Use the Request a Quote form on this page to request the exact SY87725LHY, current availability, and delivery terms. The form avoids static or potentially inaccurate price information and allows the requested package and order quantity to be confirmed. Engineers should specify the complete manufacturer part number rather than relying on a shortened base designation or the related SY87725LHY-TR order code.
What is the price of the SY87725LHY?
The current commercial price for the SY87725LHY depends on quantity, package form, and supply conditions and should be requested through the Request a Quote form on this page. The form provides a current sourcing response rather than embedding a price that may quickly become stale. Include the required quantity, target delivery date, and whether the exact 64-lead TQFP exposed-pad order code is approved for the assembly.
What is the lead time and stock status for SY87725LHY?
Current lead time and stock status should be confirmed through the Request a Quote form on this page using the exact SY87725LHY order code. A catalog listing may show substantial inventory, but available stock can change rapidly and does not confirm allocation for a production schedule. Provide the requested quantity, forecast horizon, and assembly date so the sourcing response can reflect the actual build plan.
How does the SY87725LHY compare with a generic LVDS transceiver?
The SY87725LHY differs from a generic LVDS transceiver through its integration for optical access applications and its defined PON rate set. It combines four-bit parallel and serial conversion, supports downstream operation through 2.5 Gbit/s, and supports upstream rates from 156 Mbit/s to 1.25 Gbit/s. A generic LVDS device may meet the signaling requirement while differing in width, rate coverage, pin assignment, clocking, or firmware control.
When should I choose the SY87725LHY instead of a generic transceiver?
Choose the SY87725LHY when the design specifically requires a four-bit, 3.3 V LVDS SerDes with defined PON downstream and upstream rates. Its 2.5 Gbit/s maximum downstream mode and 1.25 Gbit/s maximum upstream mode provide a clear fit for optical access links. A generic transceiver is more appropriate only when its pinout, reference clock, serialization width, rate table, and control interface fully match the complete system design.
What are the key specifications of SY87725LHY that engineers should know?
The key SY87725LHY specifications are a four-bit SerDes architecture, 3.15 V to 3.45 V supply operation, LVDS signaling, and a 64-lead TQFP exposed-pad package measuring 10 mm by 10 mm. The device supports downstream rates of 2.5 Gbit/s, 1.25 Gbit/s, and 625 Mbit/s and upstream rates of 1.25 Gbit/s, 625 Mbit/s, and 156 Mbit/s for optical access and PON equipment.

Données de référence d'ingénierie pour SY87725LHY — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the SY87725LHY when an optical-access design needs a four-bit SerDes with defined PON rate support, LVDS signaling, and 3.15 V to 3.45 V operation. Its 2.5 Gbit/s maximum downstream rate is appropriate for high-rate downstream paths, while 1.25 Gbit/s, 625 Mbit/s, and 156 Mbit/s upstream options support several service directions. A generic LVDS transceiver may be considered only after confirming an identical four-bit interface, compatible pin assignment, reference clock, control protocol, and complete rate table. No separate pin-compatible replacement is identified, so second sourcing should depend on a manufacturer-approved cross-reference rather than a similar package number. For new layouts, use the exposed-pad connection, clocking, decoupling, and differential-routing recommendations from the manufacturer datasheet. For an existing board, verify the exact MPN, package, operating modes, and firmware or control configuration before replacing any related order code.

Comparaison avec les alternatives

Paramètre Ce produit
Package 64-lead TQFP with exposed pad, 10 mm x 10 mm
Brand Microchip Technology
Device Type Single-chip 4-bit SerDes transceiver
Supply Voltage Range 3.15 V to 3.45 V
Signal Protocol LVDS
Maximum Downstream Rate 2.5 Gbit/s
Maximum Upstream Rate 1.25 Gbit/s
Operating Temperature Range -40 °C to +85 °C
Primary Application PON and optical access

Principaux différenciateurs

  • Integrated four-bit SerDes optimized for optical access (vs Generic LVDS transceiver)
  • Multiple downstream operating rates (vs Single-rate generic transceiver)
  • Multiple upstream operating rates (vs Fixed-rate upstream interface)

Notes de conception

Treat the high-speed differential nets as controlled-impedance routed structures and follow the manufacturer reference layout. Keep return paths continuous beneath the pairs, avoid discontinuities across plane transitions, and match the two conductors of each differential pair as closely as practical. Place the exposed-pad connection directly into the ground plane with minimal thermal-pad impedance, and keep unrelated switching or digital return currents away from the SerDes and reference-clock regions.

Decouple the 3.3 V supply locally at the transceiver's supply pins using the capacitance and placement specified by the manufacturer. Confirm current draw in every supported downstream and upstream rate mode before sizing the regulator and copper area. Maintain short, wide supply and ground connections so switching resistance and loop inductance do not degrade signal integrity during simultaneous high-speed activity.

The 2.5 Gbit/s downstream mode is the most demanding timing condition and should be evaluated with realistic reference-clock quality, package parasitics, PCB stack-up, and downstream loading. Use the manufacturer's recommended clock-generation and termination arrangements, and verify rise time, jitter, eye opening, and differential voltage through simulation or measurement. Do not infer signal margin from a successful link at a lower supported rate.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer's current product documentation or declaration.

Recherches associées

SY87725LHY datasheet SY87725LHY specifications SY87725LHY pinout SY87725LHY datasheet pdf SY87725LHY 64-TQFP SY87725LHY 3.3V SY87725LHY 2.5Gbps SY87725LHY PON SY87725LHY LVDS transceiver SY87725LHY replacement SY87725LHY equivalent SY87725LHY price Microchip SY87725LHY SY87725LHY application circuit

Composants & termes associés

Microchip Technology SY87725LHY SY87725LHY-TR SerDes serializer deserializer LVDS interface transceiver interface IC semiconductor PON passive optical network optical access optical network unit 3.3 V 2.5 Gbit/s 1.25 Gbit/s 625 Mbit/s 156 Mbit/s 64-lead TQFP exposed pad surface mount differential signaling reference clock SerDes transceiver
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ