TAS5110ADAD - 50W Stereo Class-D Stage | Texas Instruments
Référence : TAS5110ADAD ✗ Fin de vieTAS5110ADAD Présentation
A true-digital audio amplifier power stage forms the output section of a digital audio system. Unlike a conventional analog Class-D amplifier, it receives digital audio commands and internally generates the switching signals needed to drive loudspeakers. Within the broader hierarchy, the TAS5110ADAD is a Class-D audio amplifier IC, a digital power amplifier, and a semiconductor power-management device. This architecture places signal processing and power-stage functions close to the speaker load while supporting efficient amplification.
The headline capability is 50 W × 2 continuous output into 6-ohm speakers. Its two-channel stereo configuration supports left and right amplification from one device, reducing the number of output ICs required in a multiway audio system. A 3 V to 3.6 V operating supply suits portable and space-constrained equipment, while the 32-pin HTSSOP package supports compact surface-mount layouts. The listed operating-temperature range is 0°C to 70°C.
Equibit and PurePath Digital technologies are central to the device’s operating concept. Equibit provides digital speaker-power management, while PurePath Digital provides the digital audio interface and modulation architecture. The TAS5110A is intended to work with a TAS50xx digital audio PWM processor, allowing digital commands and audio data to reach the output stage without a conventional analog input signal at the amplifier.
Typical uses include stereo wireless speakers, portable audio equipment, compact multimedia speakers, digital active loudspeakers, soundbars, and compact home-audio systems. Its 50 W per-channel capability is appropriate for room-filling consumer speakers when the system’s supply, thermal design, output filtering, and speaker impedance satisfy the manufacturer’s operating requirements. Two channels in one package also simplify balanced stereo layouts.
Thermal management is central because the exposed-pad HTSSOP must dissipate power efficiently into the printed circuit board. Place the device on a multilayer board with a continuous ground plane, use the manufacturer’s reference layout, and provide copper around the thermal pad. Input, digital-control, ground, and speaker connections should follow the recommended layout to control switching noise and maintain signal integrity.
This product page combines the core TAS5110ADAD specifications, package details, verified drop-in replacement analysis, application guidance, and design-focused comparisons. It is intended to help engineers evaluate digital speaker-drive architecture, confirm PCB compatibility, and distinguish the A-revision ordering from related TAS5110 family members before releasing a production design.
Alternatives de remplacement direct pour TAS5110ADAD — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec TAS5110ADAD (même facteur de forme et même empreinte) — différant par Maximum Output Power.
TAS5110DAD
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →TAS5110ADAD Valeurs maximales et caractéristiques électriques
| Product Type | Stereo digital audio amplifier power stage |
| Amplifier Class | Class D |
| Channel Configuration | 2 channels (stereo) |
| Maximum Output Power | 50 W per channel into 6 ohm |
| Total Output Power | 100 W for 2 channels into 6 ohm |
| Supply Voltage Range | 3 V to 3.6 V |
| Digital Audio Technology | PurePath Digital and Equibit |
| Boîtier | 32-pin HTSSOP |
| Type de montage | Surface mount |
| Package Width | 6.10 mm |
| Package Length | 0.240 inch |
| Plage de température de fonctionnement | 0°C to 70°C |
| Speaker Output Type | Differential class-D speaker output |
| Status | Obsolete |
Guide de configuration des broches du TAS5110ADAD 0.240 inch
Configuration des broches du TAS5110ADAD (boîtier 0.240 inch). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour TAS5110ADAD.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
TAS5110ADAD convient pour 6 applications: Compact Stereo Wireless Speakers, Portable Audio Equipment, Digital Active Loudspeakers, Multimedia Speaker Systems, Soundbar Speaker Modules, Digital Home-Audio Products.
Compact Stereo Wireless Speakers
The TAS5110ADAD fits compact stereo wireless speakers because it delivers 50 W per channel into 6-ohm drivers while operating from a 3 V to 3.6 V supply. According to the Texas Instruments datasheet, the device uses PurePath Digital and Equibit technology and is designed to operate with a compatible digital audio PWM processor. In a two-way enclosure, the power stage drives left and right channels through separate speaker outputs while digital controls manage gain and protection. The 32-HTSSOP package reduces board area, but the exposed thermal pad must connect to the recommended ground-plane copper and thermal structure. Designers should verify output-filter topology, speaker impedance, amplifier gain settings, and the continuous 50 W thermal condition before releasing the enclosure.
Recommandé
Portable Audio Equipment
The TAS5110ADAD is suitable for portable audio equipment where efficient digital amplification and limited board space are priorities. According to the Texas Instruments datasheet, the device combines two 50 W output channels with a 3 V to 3.6 V operating range in a 32-pin HTSSOP package. A compatible TAS50xx-class digital audio processor can provide audio data, modulation commands, and speaker-management functions without requiring a conventional analog audio input at the output stage. The principal trade-off is heat: two channels dissipating substantial power require a multilayer PCB, uninterrupted ground copper, and a carefully sized enclosure. Battery-powered designs must also account for the amplifier load during maximum output, including sustained playback rather than short acoustic peaks.
Recommandé
Digital Active Loudspeakers
The TAS5110ADAD can serve as the power-processing section of an active loudspeaker because it receives digital audio information and drives two speaker channels directly. According to the Texas Instruments datasheet, its 50 W-per-channel capability into 6 ohms and Equibit digital speaker-management features suit digitally controlled speaker systems. The digital control path allows gain, protection, and other speaker functions to be coordinated with a compatible PWM audio processor. The implementation must include the specified LC output filtering between the Class-D outputs and the speaker connectors, with component values selected from the manufacturer reference design. Thermal validation should cover both channels operating simultaneously at the intended load, while EMI testing should examine switching-node radiation and supply-ripple coupling into adjacent analog circuitry.
Recommandé
Multimedia Speaker Systems
The TAS5110ADAD supports multimedia speaker systems requiring high stereo output power from a compact surface-mount device. According to the Texas Instruments datasheet, it provides two Class-D channels rated at 50 W each into 6-ohm loads and uses a 3 V to 3.6 V supply range. A digital audio processor can pass the required audio and control data while the power stage handles loudspeaker drive. Compared with two separate mono amplifiers, the integrated stereo device simplifies channel symmetry and reduces duplicated control infrastructure. Layout quality remains decisive because exposed-pad heat spreading and return-current control influence both thermal performance and switching-noise behavior. Use short power connections, adequate supply bypassing, a continuous ground reference, and the manufacturer’s output-filter arrangement to preserve signal integrity.
Recommandé
Soundbar Speaker Modules
The TAS5110ADAD is applicable to powered soundbar modules that use a compact digital audio architecture for left and right channel amplification. According to the Texas Instruments datasheet, the device combines 50 W × 2 Class-D output with PurePath Digital and Equibit control in a 32-pin HTSSOP package. This allows a system controller to coordinate speaker volume and protection digitally while the TAS5110ADAD handles the power conversion and loudspeaker drive. In a soundbar, channel imbalance, thermal coupling, and output-filter matching can affect sound quality, so the amplifier should be mounted on a multilayer board with balanced thermal paths and routed away from sensitive microphone or wireless-processing areas. Validate startup behavior, mute sequencing, thermal rise, and full-power simultaneous playback before mechanical enclosure approval.
Recommandé
Digital Home-Audio Products
The TAS5110ADAD fits digital home-audio products that combine network audio decoding with efficient speaker amplification. According to the Texas Instruments datasheet, the power stage accepts digital audio and control information through the PurePath Digital architecture rather than requiring an analog signal at its input. Its two 50 W channels can drive left and right speakers in a compact powered-speaker or integrated entertainment enclosure. The design advantage is a direct digital signal path from the audio processor, while the main implementation burden is careful integration of power, filtering, and thermal management. The 3 V to 3.6 V supply range must be coordinated with the processor and any regulators in the signal chain. Grounding and output-filter placement should follow the reference design to minimize digital switching energy from reaching audio outputs or radio-frequency sections.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TAS5110ADAD — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TAS5110DAD |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 32-HTSSOP | 32-HTSSOP |
| Channel Configuration | 2 channels (stereo) | 2 channels (stereo) |
| Amplifier Class | Class D | Class D |
| Output Power per Channel | 50 W into 6 ohm | 50 W into 6 ohm |
| Total Stereo Output Power | 100 W into 6 ohm per channel | 100 W into 6 ohm per channel |
| Digital Audio Technology | PurePath Digital and Equibit | PurePath Digital and Equibit |
| Mounting Type | Surface mount | Surface mount |
Principaux différenciateurs
- A-revision TAS5110A ordering retains the full stereo power rating (vs TAS5110DAD)
- One package provides complete left and right amplification (vs TAS5110DAD)
- Digital loudspeaker control is integrated into the output stage (vs TAS5110DAD)
Notes de conception
Treat the exposed thermal pad as the primary heat path for the TAS5110ADAD. Place the 32-HTSSOP on a multilayer PCB with uninterrupted ground-plane copper beneath and around the pad, then connect the pad electrically as specified by the manufacturer. Verify junction temperature with both channels operating at the intended continuous output rather than relying only on a one-channel test. Add thermal coupling to an enclosure or heat spreader when the board area and natural convection cannot dissipate the worst-case Class-D output loss.
Use the manufacturer’s recommended PCB stack-up, component placement, output-filter geometry, and exposed-pad layout. Keep the Class-D switching-node copper compact and away from microphone, antenna, and low-level analog inputs. Route supply current through a low-impedance plane with local high-frequency bypass capacitance at the device. Maintain a continuous return path beneath digital-control and power interfaces so switching-current loops do not introduce common-mode noise into adjacent circuitry.
Do not substitute the TAS5110DAD solely because both use a 32-HTSSOP package. Before replacement, compare the digital-control timing, processor interface requirements, output-filter recommendations, protection behavior, thermal limits, and revision-specific notes in the Texas Instruments datasheet. For a new design, confirm that the full TAS50xx signal chain supports the intended sample rate, modulation commands, and speaker-management configuration. An electrically similar footprint does not by itself guarantee system compatibility.
Use a 3 V to 3.6 V supply that remains within tolerance under both idle and maximum audio load conditions. Place the required bypass capacitors close to their designated power and ground pins, and size the supply path for the combined demand of two 50 W output channels after accounting for amplifier efficiency. Avoid adding large supply-path inductance that could increase switching ripple or disturb the digital audio processor sharing the same power system.
Informations de conformité
The device is identified as obsolete. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or current compliance documentation.