Texas Instruments

TAS5110ADAD - 50W Stereo Class-D Stage | Texas Instruments

N.º de pieza: TAS5110ADAD ✗ Fin de vida
3 V to 3.6 V Vdss 32-pin HTSSOP Package
MOQ: 1 |

TAS5110ADAD Descripción general

The Texas Instruments TAS5110ADAD is a 50 W per-channel stereo Class-D digital audio power stage with a 3 V to 3.6 V supply range, designed for high-efficiency loudspeaker drive in a 32-pin HTSSOP package. It combines two audio output channels, Equibit modulation technology, and PurePath Digital technology in a surface-mount power-stage IC intended to operate with a compatible digital audio PWM processor.

A true-digital audio amplifier power stage forms the output section of a digital audio system. Unlike a conventional analog Class-D amplifier, it receives digital audio commands and internally generates the switching signals needed to drive loudspeakers. Within the broader hierarchy, the TAS5110ADAD is a Class-D audio amplifier IC, a digital power amplifier, and a semiconductor power-management device. This architecture places signal processing and power-stage functions close to the speaker load while supporting efficient amplification.

The headline capability is 50 W × 2 continuous output into 6-ohm speakers. Its two-channel stereo configuration supports left and right amplification from one device, reducing the number of output ICs required in a multiway audio system. A 3 V to 3.6 V operating supply suits portable and space-constrained equipment, while the 32-pin HTSSOP package supports compact surface-mount layouts. The listed operating-temperature range is 0°C to 70°C.

Equibit and PurePath Digital technologies are central to the device’s operating concept. Equibit provides digital speaker-power management, while PurePath Digital provides the digital audio interface and modulation architecture. The TAS5110A is intended to work with a TAS50xx digital audio PWM processor, allowing digital commands and audio data to reach the output stage without a conventional analog input signal at the amplifier.

Typical uses include stereo wireless speakers, portable audio equipment, compact multimedia speakers, digital active loudspeakers, soundbars, and compact home-audio systems. Its 50 W per-channel capability is appropriate for room-filling consumer speakers when the system’s supply, thermal design, output filtering, and speaker impedance satisfy the manufacturer’s operating requirements. Two channels in one package also simplify balanced stereo layouts.

Thermal management is central because the exposed-pad HTSSOP must dissipate power efficiently into the printed circuit board. Place the device on a multilayer board with a continuous ground plane, use the manufacturer’s reference layout, and provide copper around the thermal pad. Input, digital-control, ground, and speaker connections should follow the recommended layout to control switching noise and maintain signal integrity.

This product page combines the core TAS5110ADAD specifications, package details, verified drop-in replacement analysis, application guidance, and design-focused comparisons. It is intended to help engineers evaluate digital speaker-drive architecture, confirm PCB compatibility, and distinguish the A-revision ordering from related TAS5110 family members before releasing a production design.

Alternativas directas para TAS5110ADAD — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con TAS5110ADAD (mismo factor de forma y huella) — difiere en Maximum Output Power.

Texas Instruments
Maximum Output Power: 50 W RMS per channel at 10% THD
Comparar con TAS5110ADAD →

TAS5110DAD

✅ Sustitución directa
Texas Instruments
📦 32-HTSSOP
Stereo Class-D true digital audio amplifier power stage · 2 channels · 50 W RMS per channel at 10% THD · 40 W RMS per channel at 0.1% THD · <0.09% typical at 1 kHz input · 93 dB in a TDAA system · >90% · 3.3 V

Consulte el precio

Ver hoja de datos →

TAS5110ADAD Valores máximos y características eléctricas

Product Type Stereo digital audio amplifier power stage
Amplifier Class Class D
Channel Configuration 2 channels (stereo)
Maximum Output Power 50 W per channel into 6 ohm
Total Output Power 100 W for 2 channels into 6 ohm
Supply Voltage Range 3 V to 3.6 V
Digital Audio Technology PurePath Digital and Equibit
Encapsulado 32-pin HTSSOP
Tipo de montaje Surface mount
Package Width 6.10 mm
Package Length 0.240 inch
Rango de temperatura de funcionamiento 0°C to 70°C
Speaker Output Type Differential class-D speaker output
Status Obsolete

Guía de configuración de pines de TAS5110ADAD 0.240 inch

Configuración de pines para TAS5110ADAD (encapsulado 0.240 inch). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 0.240 inch para TAS5110ADAD

No hay datos detallados de patillaje disponibles para TAS5110ADAD.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

TAS5110ADAD es adecuado para 6 aplicacións: Compact Stereo Wireless Speakers, Portable Audio Equipment, Digital Active Loudspeakers, Multimedia Speaker Systems, Soundbar Speaker Modules, Digital Home-Audio Products.

📱

Compact Stereo Wireless Speakers

The TAS5110ADAD fits compact stereo wireless speakers because it delivers 50 W per channel into 6-ohm drivers while operating from a 3 V to 3.6 V supply. According to the Texas Instruments datasheet, the device uses PurePath Digital and Equibit technology and is designed to operate with a compatible digital audio PWM processor. In a two-way enclosure, the power stage drives left and right channels through separate speaker outputs while digital controls manage gain and protection. The 32-HTSSOP package reduces board area, but the exposed thermal pad must connect to the recommended ground-plane copper and thermal structure. Designers should verify output-filter topology, speaker impedance, amplifier gain settings, and the continuous 50 W thermal condition before releasing the enclosure.

📱

Portable Audio Equipment

The TAS5110ADAD is suitable for portable audio equipment where efficient digital amplification and limited board space are priorities. According to the Texas Instruments datasheet, the device combines two 50 W output channels with a 3 V to 3.6 V operating range in a 32-pin HTSSOP package. A compatible TAS50xx-class digital audio processor can provide audio data, modulation commands, and speaker-management functions without requiring a conventional analog audio input at the output stage. The principal trade-off is heat: two channels dissipating substantial power require a multilayer PCB, uninterrupted ground copper, and a carefully sized enclosure. Battery-powered designs must also account for the amplifier load during maximum output, including sustained playback rather than short acoustic peaks.

🔊

Digital Active Loudspeakers

The TAS5110ADAD can serve as the power-processing section of an active loudspeaker because it receives digital audio information and drives two speaker channels directly. According to the Texas Instruments datasheet, its 50 W-per-channel capability into 6 ohms and Equibit digital speaker-management features suit digitally controlled speaker systems. The digital control path allows gain, protection, and other speaker functions to be coordinated with a compatible PWM audio processor. The implementation must include the specified LC output filtering between the Class-D outputs and the speaker connectors, with component values selected from the manufacturer reference design. Thermal validation should cover both channels operating simultaneously at the intended load, while EMI testing should examine switching-node radiation and supply-ripple coupling into adjacent analog circuitry.

🖥️

Multimedia Speaker Systems

The TAS5110ADAD supports multimedia speaker systems requiring high stereo output power from a compact surface-mount device. According to the Texas Instruments datasheet, it provides two Class-D channels rated at 50 W each into 6-ohm loads and uses a 3 V to 3.6 V supply range. A digital audio processor can pass the required audio and control data while the power stage handles loudspeaker drive. Compared with two separate mono amplifiers, the integrated stereo device simplifies channel symmetry and reduces duplicated control infrastructure. Layout quality remains decisive because exposed-pad heat spreading and return-current control influence both thermal performance and switching-noise behavior. Use short power connections, adequate supply bypassing, a continuous ground reference, and the manufacturer’s output-filter arrangement to preserve signal integrity.

🎧

Soundbar Speaker Modules

The TAS5110ADAD is applicable to powered soundbar modules that use a compact digital audio architecture for left and right channel amplification. According to the Texas Instruments datasheet, the device combines 50 W × 2 Class-D output with PurePath Digital and Equibit control in a 32-pin HTSSOP package. This allows a system controller to coordinate speaker volume and protection digitally while the TAS5110ADAD handles the power conversion and loudspeaker drive. In a soundbar, channel imbalance, thermal coupling, and output-filter matching can affect sound quality, so the amplifier should be mounted on a multilayer board with balanced thermal paths and routed away from sensitive microphone or wireless-processing areas. Validate startup behavior, mute sequencing, thermal rise, and full-power simultaneous playback before mechanical enclosure approval.

🏠

Digital Home-Audio Products

The TAS5110ADAD fits digital home-audio products that combine network audio decoding with efficient speaker amplification. According to the Texas Instruments datasheet, the power stage accepts digital audio and control information through the PurePath Digital architecture rather than requiring an analog signal at its input. Its two 50 W channels can drive left and right speakers in a compact powered-speaker or integrated entertainment enclosure. The design advantage is a direct digital signal path from the audio processor, while the main implementation burden is careful integration of power, filtering, and thermal management. The 3 V to 3.6 V supply range must be coordinated with the processor and any regulators in the signal chain. Grounding and output-filter placement should follow the reference design to minimize digital switching energy from reaching audio outputs or radio-frequency sections.

What is the Texas Instruments TAS5110ADAD?
The Texas Instruments TAS5110ADAD is a two-channel, stereo Class-D digital audio amplifier power stage rated for 50 W per channel into a 6-ohm load. According to the Texas Instruments datasheet, it uses PurePath Digital and Equibit technology and is packaged in a 32-pin HTSSOP. The device operates from a 3 V to 3.6 V supply and is intended for use with a compatible digital audio PWM processor.
How much power can the TAS5110ADAD deliver per channel?
The TAS5110ADAD can deliver 50 W per channel into a 6-ohm speaker, corresponding to 100 W total for its two output channels. According to the Texas Instruments datasheet, the device is a Class-D digital power stage rather than a low-power analog output amplifier. Actual continuous capability depends on supply voltage, PCB thermal design, output filtering, speaker impedance, and the manufacturer’s operating limits.
What is the operating voltage of TAS5110ADAD?
The TAS5110ADAD operates from 3 V to 3.6 V. According to the Texas Instruments datasheet, this low-voltage supply range is intended for compact digital audio systems using a dedicated audio processor and external Class-D output stage. Designers should preserve adequate bypass capacitance at the supply pins and follow the recommended layout to minimize switching noise and supply disturbance.
Where can I find the TAS5110ADAD datasheet and pinout?
The TAS5110ADAD datasheet is available through the Texas Instruments document listed in the technical-document section, while a manufacturer-hosted copy can also be located through the official product support path. According to the manufacturer datasheet, the device uses a 32-pin HTSSOP with an exposed thermal pad. Use the datasheet’s pin-description table and package drawing when assigning PCB nets and verifying exposed-pad connections.
Is the TAS5110ADAD a stereo Class-D amplifier?
The TAS5110ADAD is a stereo Class-D digital amplifier power stage with two independent output channels. According to the Texas Instruments datasheet, it is designed to drive 50 W per channel into 6-ohm loads and uses PurePath Digital technology with Equibit digital speaker-power management. It therefore differs from a conventional analog-input Class-D amplifier and requires a compatible digital audio signal chain.
What is the best drop-in replacement for TAS5110ADAD?
The TAS5110DAD is the closest identified same-package drop-in alternative for the TAS5110ADAD. According to the Texas Instruments product information, both are two-channel Class-D power stages in 32-pin HTSSOP packages. The TAS5110ADAD carries the A-revision ordering, while the exact electrical differences and production-status conditions should be checked in the manufacturer datasheet before substitution.
Can TAS5110DAD replace TAS5110ADAD on the same PCB?
The TAS5110DAD can be considered a footprint-compatible candidate for the TAS5110ADAD because both use the 32-pin HTSSOP format and implement the same two-channel Class-D power-stage function. According to the Texas Instruments product descriptions, each is rated for stereo operation at 50 W per channel into 6 ohms. Confirm control-interface timing, exposed-pad implementation, supply sequencing, and lifecycle requirements before production release.
TAS5110ADAD vs TAS5110DAD: which is better for a stereo speaker system?
The TAS5110ADAD is preferable when the system is intended to use the A revision of the TAS5110 family, while the TAS5110DAD remains the direct footprint-oriented alternative. According to the Texas Instruments datasheet, both are stereo Class-D stages rated for 50 W per channel into 6 ohms. Their common HTSSOP footprint simplifies replacement, but firmware and timing compatibility must be confirmed for the selected digital audio processor.
When should I choose TAS5110ADAD instead of TAS5110DAD?
Choose TAS5110ADAD when an A-revision TAS5110A power stage is required by the product specification, qualification record, or control-interface design. According to the Texas Instruments family documentation, both devices provide 2-channel Class-D amplification at 50 W per channel into 6 ohms. If the original design used the D revision without revision-specific behavior, the TAS5110DAD may provide a lower-risk continuity option after compatibility review.
Is TAS5110ADAD suitable for portable and compact stereo speakers?
The TAS5110ADAD is suitable for compact stereo speakers because it combines two 50 W output channels with a 3 V to 3.6 V supply range in a surface-mount HTSSOP package. According to the Texas Instruments datasheet, its digital architecture is intended for portable and space-constrained audio products. Use the exposed thermal pad and manufacturer-recommended PCB layout to maintain safe operating temperature.
What thermal design is required for the TAS5110ADAD?
The TAS5110ADAD requires an exposed-pad PCB design that transfers output-stage heat into the board and, when necessary, a thermal interface to a suitable heat spreader. According to the Texas Instruments application guidance, the exposed pad must be electrically connected as specified and surrounded by uninterrupted ground-plane copper. Follow the manufacturer’s reference layout and verify junction temperature under worst-case channel loading.
Does the TAS5110ADAD require a digital audio processor?
The TAS5110ADAD is designed to operate with a compatible digital audio PWM processor such as a device in the TAS50xx family. According to the Texas Instruments datasheet, PurePath Digital carries digital audio and control information into the power stage rather than accepting a conventional analog audio input. The processor and power stage must therefore be evaluated together for command timing, clocking, data format, and speaker management.
What can replace TAS5110ADAD in a legacy audio design?
The TAS5110DAD is the most direct identified replacement candidate because it retains the 32-pin HTSSOP footprint and the same 2-channel, 50 W-per-channel Class-D role. According to the Texas Instruments product descriptions, both parts belong to the TAS5110 family. Treat the substitution as a drop-in hardware candidate, but verify digital-control compatibility, thermal performance, lifecycle status, and any revision-specific behavior before production use.
Is TAS5110ADAD the same as TAS5110DAD?
The TAS5110ADAD is the A-revision ordering of the TAS5110A family, whereas TAS5110DAD identifies the earlier D revision. According to the Texas Instruments datasheet, both use a 32-pin HTSSOP package and provide two-channel Class-D output rated at 50 W per channel into 6 ohms. They are closely related, but firmware timing and revision-specific electrical details must be checked before interchangeability is assumed.
What are the key specifications of TAS5110ADAD that engineers should know?
The key TAS5110ADAD specifications are 2 stereo channels, 50 W per channel into 6 ohms, a 3 V to 3.6 V operating supply, and a 32-pin HTSSOP package. According to the Texas Instruments datasheet, the device also provides PurePath Digital and Equibit technology and is intended for use with a digital audio PWM processor. The primary design constraints are PCB heat spreading, exposed-pad grounding, supply bypassing, and digital-interface compatibility.
Where to buy TAS5110ADAD, and what is its price and lead time?
The TAS5110ADAD can be requested through the “Request a Quote” form on this XAIPART product page. The form is the appropriate route for current unit availability, MOQ, order quantity, lead time, and a quotation for the exact 32-pin HTSSOP ordering code. Because this part is marked obsolete, include the target quantity and required delivery date in the request so the supply response can reflect a realistic lifecycle plan.

Datos de referencia de ingeniería para TAS5110ADAD — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the TAS5110ADAD when a legacy digital audio design explicitly calls for the A revision and requires two 50 W-per-channel Class-D outputs in a 32-HTSSOP package. It is particularly appropriate for portable speakers, active loudspeakers, multimedia systems, and soundbars designed around a compatible TAS50xx digital audio processor. The TAS5110DAD is the closest identified hardware alternative when that revision can satisfy the system requirements, but interface timing and revision-specific behavior still require comparison with the manufacturer datasheet. Neither device should be selected merely because another amplifier also uses HTSSOP packaging. Confirm supply range, exposed-pad implementation, control protocol, output filters, thermal performance, and production availability. For new designs, evaluate current amplifier families when longevity and availability are more important than reproducing an obsolete TAS5110 platform.

Comparación con alternativas

Parámetro Este producto TAS5110DAD
Brand Texas Instruments Texas Instruments
Package 32-HTSSOP 32-HTSSOP
Channel Configuration 2 channels (stereo) 2 channels (stereo)
Amplifier Class Class D Class D
Output Power per Channel 50 W into 6 ohm 50 W into 6 ohm
Total Stereo Output Power 100 W into 6 ohm per channel 100 W into 6 ohm per channel
Digital Audio Technology PurePath Digital and Equibit PurePath Digital and Equibit
Mounting Type Surface mount Surface mount

Diferenciadores clave

  • A-revision TAS5110A ordering retains the full stereo power rating (frente a TAS5110DAD)
  • One package provides complete left and right amplification (frente a TAS5110DAD)
  • Digital loudspeaker control is integrated into the output stage (frente a TAS5110DAD)

Notas de diseño

Treat the exposed thermal pad as the primary heat path for the TAS5110ADAD. Place the 32-HTSSOP on a multilayer PCB with uninterrupted ground-plane copper beneath and around the pad, then connect the pad electrically as specified by the manufacturer. Verify junction temperature with both channels operating at the intended continuous output rather than relying only on a one-channel test. Add thermal coupling to an enclosure or heat spreader when the board area and natural convection cannot dissipate the worst-case Class-D output loss.

Use the manufacturer’s recommended PCB stack-up, component placement, output-filter geometry, and exposed-pad layout. Keep the Class-D switching-node copper compact and away from microphone, antenna, and low-level analog inputs. Route supply current through a low-impedance plane with local high-frequency bypass capacitance at the device. Maintain a continuous return path beneath digital-control and power interfaces so switching-current loops do not introduce common-mode noise into adjacent circuitry.

Do not substitute the TAS5110DAD solely because both use a 32-HTSSOP package. Before replacement, compare the digital-control timing, processor interface requirements, output-filter recommendations, protection behavior, thermal limits, and revision-specific notes in the Texas Instruments datasheet. For a new design, confirm that the full TAS50xx signal chain supports the intended sample rate, modulation commands, and speaker-management configuration. An electrically similar footprint does not by itself guarantee system compatibility.

Use a 3 V to 3.6 V supply that remains within tolerance under both idle and maximum audio load conditions. Place the required bypass capacitors close to their designated power and ground pins, and size the supply path for the combined demand of two 50 W output channels after accounting for amplifier efficiency. Avoid adding large supply-path inductance that could increase switching ripple or disturb the digital audio processor sharing the same power system.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The device is identified as obsolete. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or current compliance documentation.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

TAS5110ADAD datasheet TAS5110ADAD pinout TAS5110ADAD datasheet pdf TAS5110ADAD equivalent TAS5110ADAD replacement TAS5110ADAD vs TAS5110DAD TAS5110ADAD HTSSOP pinout TAS5110ADAD 50W stereo amplifier TAS5110ADAD application circuit TAS5110ADAD price Texas Instruments TAS5110ADAD TAS5110ADAD stock

Componentes & términos relacionados

Texas Instruments TAS5110ADAD TAS5110DAD TAS5110A TAS50xx Class-D amplifier digital audio amplifier true-digital audio amplifier stereo amplifier audio power stage PurePath Digital Equibit digital speaker management PWM audio processor HTSSOP-32 TSSOP package family surface-mount package exposed thermal pad 50 W per channel 3 V to 3.6 V supply Class-D output filter speaker impedance semiconductor power amplifier digital audio system
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ