Texas Instruments

TAS5614APHD - 150W Stereo Class-D Power Stage | TI

Référence : TAS5614APHD ✓ Actif
18 V to 38 V Vdss HTQFP-64 (PHD), exposed pad Package
MOQ : 1 |

TAS5614APHD Présentation

The Texas Instruments TAS5614APHD is a digital-input Class-D audio power stage rated for 150 W stereo or 300 W mono operation, with an 18 V to 38 V power-stage supply and a 64-pin HTQFP (PHD) package. It uses PurePath HD closed-loop feedback to monitor the output during operation, combining high output power with integrated digital control and amplifier supervision.

A Class-D audio power stage is a switching amplifier topology that efficiently converts a supply rail into a high-current speaker output. Unlike a linear output stage, it dissipates less energy during normal power delivery and is commonly used where efficiency, thermal performance, and compactness matter. Within the power-amplifier hierarchy, this device is a digital-input audio power stage intended to drive passive loudspeakers from a regulated power supply.

The TAS5614APHD supports up to 150 W per channel in stereo or 300 W into a mono load from a 36 V supply. Its operating supply range extends from 18 V to 38 V, allowing use in 24 V and 36 V power systems. Digital input control supports programmable operation, while integrated feedback provides real-time output monitoring. The 14 mm by 14 mm exposed-pad package improves heat transfer through its bottom thermal pad.

Texas Instruments describes the device as a high-performance Class-D amplifier with integrated closed-loop feedback. The digital command interface allows a system controller to configure operating behavior rather than relying only on analog gain-setting components. For thermal and acoustic design, the key considerations are output-filter selection, speaker impedance, continuous versus peak power, copper heat spreading, and the stability of the 12 V logic and 36 V power-stage supplies.

Typical applications include powered speakers, sound bars, home-theater receivers, professional audio amplification, and compact multimedia systems. The stereo configuration supports two independently driven channels, while the mono configuration can provide higher output power to a single speaker or subwoofer. The integrated digital control also makes the device suitable for systems that require remote gain, status monitoring, or fault management.

Use the TAS5614A reference-layout guidance and the application diagrams in the manufacturer datasheet for high-current routing, grounding, decoupling, output filtering, and exposed-pad thermal management. The 36 V power-stage rail should have low output impedance and low noise, and the recommended 12 V supply should likewise come from a low-noise, low-output-impedance regulator.

This product overview combines the manufacturer power ratings, package information, supply limits, and application guidance with practical alternatives and selection criteria. It helps engineers identify whether the TAS5614APHD matches the required channel count, speaker impedance, output power, control interface, thermal envelope, and supply architecture of a new Class-D audio design.

Alternatives de remplacement direct pour TAS5614APHD — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec TAS5614APHD (même facteur de forme et même empreinte) — différant par Package, Product Type.

Texas Instruments
Package: 64-pin HTQFP, 14 mm x 14 mm
Product Type: Stereo Class-D analog-input audio power stage
Comparer avec TAS5614APHD →

TAS5612APHD

✅ Remplacement direct
📦 HTQFP-64 (PHD)
Lower output-power class than TAS5614APHD; 150 W stereo versus 100 W stereo for TAS5612APHD, a 33% reduction

📋 Alternative de référence (hors catalogue)

TAS5613PHD

✅ Remplacement direct
Texas Instruments
📦 HTQFP-64 (PHD)
Stereo Class-D analog-input audio power stage · 150 W · 300 W · 18 V to 38 V · 10.8 V to 13.2 V · Up to 80 kHz · 0.03% at 1 W into 4 ohms · 80 dB in BTL configuration without an input signal

Contactez-nous pour le prix

Voir la fiche technique →

TAS5614APHD Valeurs maximales et caractéristiques électriques

Product Type Digital-input Class-D audio power stage
Configuration de sortie 1-channel mono or 2-channel stereo
Stereo Output Power 150 W
Mono Output Power 300 W
Power-Stage Supply Range 18 V to 38 V
Nominal High-Voltage Supply 36 V
Logic Supply 12 V
Amplifier Topology Class-D
Input Type Digital input
Feedback Technology PurePath HD integrated closed-loop feedback
Supported Speaker Loads 4 ohm to 8 ohm
Boîtier HTQFP-64 (PHD), exposed pad
Package Body Size 14 mm x 14 mm
Nombre de broches 64 pins
Plage de température de fonctionnement 0 C to 70 C
Type de montage Surface mount

Guide de configuration des broches du TAS5614APHD 14 mm x 14 mm

Configuration des broches du TAS5614APHD (boîtier 14 mm x 14 mm). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 14 mm x 14 mm pour le TAS5614APHD

Aucune donnée de brochage détaillée disponible pour TAS5614APHD.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

TAS5614APHD convient pour 6 applications: Powered Speaker, Home-Theater Receiver, Professional Audio Amplifier, Soundbar, Digital-Input Speaker Amplifier, Multi-Way Speaker.

🎧

Powered Speaker

TAS5614APHD suits a powered speaker that must deliver up to 150 W per channel from a 36 V supply while retaining the efficiency benefits of Class-D amplification. The device can operate as two stereo channels or be configured for 300 W mono output, depending on the speaker system and thermal design. Its exposed thermal pad should be tied to a carefully sized copper area, while the output network and speaker return paths require low-inductance layout. Compared with a linear power stage, the switching architecture reduces dissipation during high-output operation and leaves more enclosure volume for the transformerless power supply and passive filtering.

📺

Home-Theater Receiver

TAS5614APHD provides a high-output solution for powered speakers and active subchannels in a home-theater receiver. Its 18 V to 38 V power-stage range accommodates a 24 V or 36 V internal rail, while digital control supports integration with an audio system controller. A mono arrangement offers up to 300 W output for a subwoofer, and the stereo arrangement supports 150 W per channel for left and right speakers. The design must reserve space for the exposed-pad heat path, output inductors and capacitors, input filtering, and a low-impedance 36 V supply capable of handling large audio transients.

🎚️

Professional Audio Amplifier

TAS5614APHD is appropriate for professional monitor, compact powered mixer, and rack-amplifier products requiring up to 150 W stereo or 300 W mono. The Class-D topology supports efficient conversion of the 36 V power-stage rail into low-impedance speaker drive, while PurePath HD closed-loop feedback helps the amplifier monitor its output. The 64-pin HTQFP package exposes its bottom pad for board-level heat removal, but sustained professional use still requires a thermal strategy based on worst-case music waveform rather than nominal resistor power. Output protection, standby behavior, channel muting, and ground-loop prevention should be evaluated at the system level.

🏠

Soundbar

TAS5614APHD can drive high-power left, right, and subwoofer channels in a soundbar when internal space and thermal capacity allow the 64-pin package. Its stereo mode supports 150 W per channel, and mono mode supports 300 W for a subwoofer, allowing flexible channel allocation from a common amplifier family. The digital command interface is useful for controlled startup, mute, and fault management in an audio system. Compact soundbars benefit from Class-D efficiency, but the design must minimize output-filter losses, separate sensitive input routing from high-current switching nodes, and maintain clearance around the exposed pad for heat spreading.

🧩

Digital-Input Speaker Amplifier

TAS5614APHD fits a digitally controlled speaker amplifier where the host processor manages gain, startup, diagnostics, and channel routing. Its digital input avoids relying solely on analog gain-control networks and supports a system architecture in which audio data and control commands are routed through digital interconnects. Power amplification still requires the manufacturer's recommended external networks and careful analog layout around the class-D outputs. A 36 V power-stage rail should be generated with low ripple and low impedance, while the 12 V logic rail should be clean enough to prevent control errors. Speaker impedance and minimum load must be validated against the application circuit.

🔊

Multi-Way Speaker

TAS5614APHD can serve as the main driver stage in a multi-way active speaker, while smaller companion stages handle less demanding channels. A 150 W stereo configuration provides useful output for full-range or low-frequency drivers, and a 300 W mono configuration suits a dedicated subwoofer. The amplifier must operate within the minimum supported speaker load, with output filters selected for the target impedance and crossover frequency. Because the PHD package has a bottom thermal pad, PCB copper and enclosure airflow must remove losses at the intended continuous level. System designers should also account for clipping, DC offset, speaker excursion, and thermal derating rather than sizing only from nominal peak power.

What is the TAS5614APHD?
The TAS5614APHD is a Texas Instruments digital-input Class-D audio power stage that delivers up to 150 W per channel in stereo or 300 W into a mono load. According to the Texas Instruments product page, it operates from an 18 V to 38 V power-stage supply and is packaged in a 64-pin HTQFP (PHD) package with an exposed thermal pad.
What power can TAS5614APHD deliver to a speaker?
TAS5614APHD can deliver up to 150 W per channel in a stereo configuration or 300 W in mono operation. According to the Texas Instruments product page, the 150 W stereo and 300 W mono ratings are based on a 36 V supply. Actual continuous output depends on speaker impedance, thermal conditions, supply capability, output filtering, and the power rating of the connected loudspeaker.
What is the operating voltage range of TAS5614APHD?
The TAS5614APHD power-stage supply operates from 18 V to 38 V. Texas Instruments specifies a nominal 36 V rail for the highest headline output ratings and also identifies a 12 V supply for the control section. The 36 V rail should have low output impedance and low noise because supply disturbances can affect the class-D output stage.
Where can I download the TAS5614APHD datasheet PDF?
The official TAS5614A datasheet is available from Texas Instruments at the manufacturer link listed on this page. It contains the electrical characteristics, pin descriptions, application diagrams, recommended external components, and reference-layout guidance. Use the pin-description table and application schematics rather than third-party pinout drawings when assigning PCB connections.
Where can I find the TAS5614APHD pinout?
The TAS5614APHD pinout is published in the Texas Instruments TAS5614A datasheet, whose official PDF is linked on this page. The device uses a 64-pin HTQFP (PHD) package. Assign pins by their manufacturer names and functions, including supply, ground, digital-control, feedback, and power-stage connections, and preserve the exposed pad as the package thermal interface.
What are the key specifications of TAS5614APHD that engineers should know?
The key TAS5614APHD specifications are 150 W stereo or 300 W mono output, an 18 V to 38 V power-stage supply range, digital input control, PurePath HD closed-loop feedback, and a 64-pin HTQFP package. Texas Instruments also identifies 12 V logic operation and a recommended operating temperature range of 0 C to 70 C for this ordering variant.
Where to buy TAS5614APHD online?
Use the Request a Quote form on this page to request TAS5614APHD availability, order quantity, and current commercial terms for the exact tray-packaged MPN. The request should identify TAS5614APHD, the desired quantity, and the production destination. Current stock and lead time are confirmed during quotation rather than assumed from a historical catalog listing.
What is the price of TAS5614APHD?
The current price of TAS5614APHD depends on order quantity, packaging, availability, and destination. Request a quote through the Request a Quote form on this page using the exact MPN TAS5614APHD. The platform handles currency conversion and commercial pricing separately so that the quote reflects current purchasing conditions.
What is the lead time for TAS5614APHD?
The current lead time for TAS5614APHD should be confirmed through the Request a Quote form on this page. Include your required quantity, date code preference, and manufacturing destination in the request. Texas Instruments' product page identifies the TAS5614APHD ordering configuration, while transaction-specific scheduling is established during quotation.
Is TAS5614APHD in stock?
TAS5614APHD availability is confirmed through the Request a Quote form on this page. Submit the exact MPN and required quantity, and the platform will return current stock and delivery information for that order. Because inventory changes by quantity and region, availability should not be inferred from a general product-page listing.
TAS5614APHD vs TAS5612APHD: which is better for a powered speaker?
TAS5614APHD is the stronger choice when a powered speaker must exceed the output capacity associated with TAS5612APHD. Texas Instruments identifies TAS5614APHD as a 150 W stereo or 300 W mono device, while the comparison must also account for the lower-class family's ratings. Choose by continuous output, speaker impedance, thermal margin, supply voltage, control interface, and verified pin compatibility.
What is the difference between TAS5614APHD and TAS5613PHD?
TAS5614APHD is rated by Texas Instruments for up to 150 W stereo or 300 W mono, making it the higher-output selection in a comparison with TAS5613PHD. The lower-output family may be appropriate when the loudspeaker and thermal design require less power. Confirm both input architecture, supply range, control functions, and footprint before treating either part as a replacement.
When should I choose TAS5614APHD over a lower-power Class-D stage?
Choose TAS5614APHD when the design target is 150 W stereo or 300 W mono output, a 4 ohm to 8 ohm loudspeaker load, and a 36 V power-stage supply. Its 18 V to 38 V operating range also supports lower-voltage deployments, but rated output still depends on the actual supply. Select a lower-power stage when its continuous rating covers the speaker and preserves thermal margin.
Is TAS5614APHD suitable for a compact powered speaker?
TAS5614APHD is suitable for a compact powered speaker when the enclosure can dissipate the losses associated with the selected output level. Its 300 W mono or 150 W stereo capability is useful for high-output designs, but exposed-pad cooling, copper area, output-filter heating, and speaker sensitivity determine practical acoustic output. Do not equate the headline wattage directly with continuous acoustic power.
What can replace TAS5614APHD?
A true TAS5614APHD replacement must use the same 64-pin HTQFP (PHD) footprint, preserve pin assignments, and provide comparable supply, control, and output characteristics. A same-category amplifier in a different package is not a drop-in replacement and requires PCB redesign. Use the manufacturer ordering information and pin tables to qualify a candidate before treating it as interchangeable.
What is the best cross-brand equivalent for TAS5614APHD?
No cross-brand drop-in equivalent is established for TAS5614APHD by the available manufacturer and distributor information. A suitable alternative would need the same HTQFP-64 footprint, compatible digital-control interface, equivalent closed-loop feedback, and comparable 18 V to 38 V power-stage operation. Treat any proposed substitute as a new design until pin-by-pin and electrical qualification is completed.

Données de référence d'ingénierie pour TAS5614APHD — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose TAS5614APHD for powered speakers, soundbars, professional audio equipment, and home-theater products requiring up to 150 W stereo or 300 W mono from an 18 V to 38 V supply. Its digital input, PurePath HD feedback, and exposed-pad HTQFP package suit digitally controlled, thermally managed Class-D designs. TAS5612APHD is appropriate when its lower 100 W stereo or 200 W mono class provides enough headroom and may simplify thermal requirements. TAS5613PHD offers another lower-output alternative in the same 64-pin PHD package. Do not choose solely by wattage: verify pin compatibility, control protocol, output-filter values, supply limits, speaker impedance, and thermal performance. For new designs, a different manufacturer should be considered only after its footprint, electrical behavior, and digital interface have been validated against the Texas Instruments reference design.

Comparaison avec les alternatives

Paramètre Ce produit TAS5612APHD TAS5613PHD
Brand Texas Instruments Texas Instruments Texas Instruments
Package HTQFP-64 (PHD) HTQFP-64 (PHD) HTQFP-64 (PHD)
Stereo Output Power 150 W 100 W 100 W
Mono Output Power 300 W 200 W 200 W
Amplifier Class Class-D Class-D Class-D

Principaux différenciateurs

  • Higher stereo output class (vs TAS5612APHD)
  • Higher mono output class (vs TAS5613PHD)
  • Integrated digital control and feedback (vs TAS5612APHD)

Notes de conception

Use the exposed pad as the primary thermal path and follow the TAS5614A reference-layout guidance. Keep the PHD thermal pad free of unintended thermal isolation, provide uninterrupted ground-plane copper beneath the package, and connect the pad to the amplifier ground according to the datasheet. Thermal sizing must use sustained output power and the actual music waveform; the 150 W stereo and 300 W mono ratings should not be treated as continuous thermal design points without enclosure verification.

Route class-D switching outputs as short, compact loops and place the recommended output-filter components close to the amplifier pins. Keep sensitive digital and feedback connections away from high-current switching nodes and the exposed pad. Use a continuous ground reference, minimize vias in power paths, and follow the manufacturer's application diagrams. The 36 V power-stage rail should originate from a low-noise, low-output-impedance supply, while the 12 V logic rail requires similarly stable routing.

Design the 36 V supply and local decoupling for the amplifier's transient current rather than its average power. Class-D output current rises sharply with low-impedance speakers and can disturb the logic rail during musical peaks. Follow the datasheet's recommended supply components and application diagrams, verify regulator current margin, and test startup, mute, and overload behavior with the intended speaker load.

Do not substitute parts solely because they are described as Class-D amplifiers. Confirm the 64-pin HTQFP footprint, exact pin assignments, digital-control protocol, supply rails, speaker-load limits, and output-filter requirements before treating a device as a replacement. Also avoid operating below the specified 18 V power-stage supply or above the 38 V maximum, and include protection appropriate to the exposed high-power speaker outputs.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance declarations are not stated in the available product information. The ordering page specifies a 0 C to 70 C commercial temperature range; AEC-Q100 status therefore requires confirmation before automotive use.

Données vérifiées le : 2026-11-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

TAS5614APHD datasheet TAS5614APHD pinout TAS5614APHD datasheet pdf TAS5614APHD schematic TAS5614APHD equivalent TAS5614APHD replacement TAS5614APHD footprint TAS5614APHD price TAS5614APHD stock Texas Instruments TAS5614APHD TAS5614APHD 150W stereo TAS5614APHD 300W mono TAS5614APHD vs TAS5612APHD TAS5614APHD powered speaker application TAS5614APHD HTQFP-64 pinout

Composants & termes associés

Texas Instruments TAS5614APHD TAS5612APHD TAS5613PHD PurePath HD Class-D amplifier digital-input power stage audio amplifier IC power management IC semiconductor HTQFP-64 PHD package TQFN family surface-mount package exposed thermal pad 150 W stereo output 300 W mono output 18 V to 38 V supply closed-loop feedback 4 ohm speaker 8 ohm speaker powered speaker home-theater receiver professional audio amplifier soundbar
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ