TAS5614APHD - 150W Stereo Class-D Power Stage | TI
MPN: TAS5614APHD ✓ Hoạt độngTAS5614APHD Tóm tắt
A Class-D audio power stage is a switching amplifier topology that efficiently converts a supply rail into a high-current speaker output. Unlike a linear output stage, it dissipates less energy during normal power delivery and is commonly used where efficiency, thermal performance, and compactness matter. Within the power-amplifier hierarchy, this device is a digital-input audio power stage intended to drive passive loudspeakers from a regulated power supply.
The TAS5614APHD supports up to 150 W per channel in stereo or 300 W into a mono load from a 36 V supply. Its operating supply range extends from 18 V to 38 V, allowing use in 24 V and 36 V power systems. Digital input control supports programmable operation, while integrated feedback provides real-time output monitoring. The 14 mm by 14 mm exposed-pad package improves heat transfer through its bottom thermal pad.
Texas Instruments describes the device as a high-performance Class-D amplifier with integrated closed-loop feedback. The digital command interface allows a system controller to configure operating behavior rather than relying only on analog gain-setting components. For thermal and acoustic design, the key considerations are output-filter selection, speaker impedance, continuous versus peak power, copper heat spreading, and the stability of the 12 V logic and 36 V power-stage supplies.
Typical applications include powered speakers, sound bars, home-theater receivers, professional audio amplification, and compact multimedia systems. The stereo configuration supports two independently driven channels, while the mono configuration can provide higher output power to a single speaker or subwoofer. The integrated digital control also makes the device suitable for systems that require remote gain, status monitoring, or fault management.
Use the TAS5614A reference-layout guidance and the application diagrams in the manufacturer datasheet for high-current routing, grounding, decoupling, output filtering, and exposed-pad thermal management. The 36 V power-stage rail should have low output impedance and low noise, and the recommended 12 V supply should likewise come from a low-noise, low-output-impedance regulator.
This product overview combines the manufacturer power ratings, package information, supply limits, and application guidance with practical alternatives and selection criteria. It helps engineers identify whether the TAS5614APHD matches the required channel count, speaker impedance, output power, control interface, thermal envelope, and supply architecture of a new Class-D audio design.
Bộ thay thế dễ dàng lắp đặt cho TAS5614APHD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TAS5614APHD (cùng hình factor và footprint) — khác nhau ở Package, Product Type.
TAS5612APHD
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TAS5613PHD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TAS5614APHD Tỷ lệ tối đa & tính chất điện
| Product Type | Digital-input Class-D audio power stage |
| Cấu hình đầu ra | 1-channel mono or 2-channel stereo |
| Stereo Output Power | 150 W |
| Mono Output Power | 300 W |
| Power-Stage Supply Range | 18 V to 38 V |
| Nominal High-Voltage Supply | 36 V |
| Logic Supply | 12 V |
| Amplifier Topology | Class-D |
| Input Type | Digital input |
| Feedback Technology | PurePath HD integrated closed-loop feedback |
| Supported Speaker Loads | 4 ohm to 8 ohm |
| Hộp | HTQFP-64 (PHD), exposed pad |
| Package Body Size | 14 mm x 14 mm |
| Số chân | 64 pins |
| Khoảng nhiệt độ hoạt động | 0 C to 70 C |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân TAS5614APHD 14 mm x 14 mm
Cấu hình chân cho TAS5614APHD (14 mm x 14 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TAS5614APHD.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TAS5614APHD phù hợp cho 6 Áp dụngs: Powered Speaker, Home-Theater Receiver, Professional Audio Amplifier, Soundbar, Digital-Input Speaker Amplifier, Multi-Way Speaker.
Powered Speaker
TAS5614APHD suits a powered speaker that must deliver up to 150 W per channel from a 36 V supply while retaining the efficiency benefits of Class-D amplification. The device can operate as two stereo channels or be configured for 300 W mono output, depending on the speaker system and thermal design. Its exposed thermal pad should be tied to a carefully sized copper area, while the output network and speaker return paths require low-inductance layout. Compared with a linear power stage, the switching architecture reduces dissipation during high-output operation and leaves more enclosure volume for the transformerless power supply and passive filtering.
Được đề xuất
Home-Theater Receiver
TAS5614APHD provides a high-output solution for powered speakers and active subchannels in a home-theater receiver. Its 18 V to 38 V power-stage range accommodates a 24 V or 36 V internal rail, while digital control supports integration with an audio system controller. A mono arrangement offers up to 300 W output for a subwoofer, and the stereo arrangement supports 150 W per channel for left and right speakers. The design must reserve space for the exposed-pad heat path, output inductors and capacitors, input filtering, and a low-impedance 36 V supply capable of handling large audio transients.
Được đề xuất
Professional Audio Amplifier
TAS5614APHD is appropriate for professional monitor, compact powered mixer, and rack-amplifier products requiring up to 150 W stereo or 300 W mono. The Class-D topology supports efficient conversion of the 36 V power-stage rail into low-impedance speaker drive, while PurePath HD closed-loop feedback helps the amplifier monitor its output. The 64-pin HTQFP package exposes its bottom pad for board-level heat removal, but sustained professional use still requires a thermal strategy based on worst-case music waveform rather than nominal resistor power. Output protection, standby behavior, channel muting, and ground-loop prevention should be evaluated at the system level.
Được đề xuất
Soundbar
TAS5614APHD can drive high-power left, right, and subwoofer channels in a soundbar when internal space and thermal capacity allow the 64-pin package. Its stereo mode supports 150 W per channel, and mono mode supports 300 W for a subwoofer, allowing flexible channel allocation from a common amplifier family. The digital command interface is useful for controlled startup, mute, and fault management in an audio system. Compact soundbars benefit from Class-D efficiency, but the design must minimize output-filter losses, separate sensitive input routing from high-current switching nodes, and maintain clearance around the exposed pad for heat spreading.
Được đề xuất
Digital-Input Speaker Amplifier
TAS5614APHD fits a digitally controlled speaker amplifier where the host processor manages gain, startup, diagnostics, and channel routing. Its digital input avoids relying solely on analog gain-control networks and supports a system architecture in which audio data and control commands are routed through digital interconnects. Power amplification still requires the manufacturer's recommended external networks and careful analog layout around the class-D outputs. A 36 V power-stage rail should be generated with low ripple and low impedance, while the 12 V logic rail should be clean enough to prevent control errors. Speaker impedance and minimum load must be validated against the application circuit.
Được đề xuất
Multi-Way Speaker
TAS5614APHD can serve as the main driver stage in a multi-way active speaker, while smaller companion stages handle less demanding channels. A 150 W stereo configuration provides useful output for full-range or low-frequency drivers, and a 300 W mono configuration suits a dedicated subwoofer. The amplifier must operate within the minimum supported speaker load, with output filters selected for the target impedance and crossover frequency. Because the PHD package has a bottom thermal pad, PCB copper and enclosure airflow must remove losses at the intended continuous level. System designers should also account for clipping, DC offset, speaker excursion, and thermal derating rather than sizing only from nominal peak power.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TAS5614APHD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TAS5612APHD | TAS5613PHD |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | HTQFP-64 (PHD) | HTQFP-64 (PHD) | HTQFP-64 (PHD) |
| Stereo Output Power | 150 W | 100 W | 100 W |
| Mono Output Power | 300 W | 200 W | 200 W |
| Amplifier Class | Class-D | Class-D | Class-D |
Bảo phân biệt quan trọng
- Higher stereo output class (vsTAS5612APHD)
- Higher mono output class (vsTAS5613PHD)
- Integrated digital control and feedback (vsTAS5612APHD)
Ghi chú thiết kế
Use the exposed pad as the primary thermal path and follow the TAS5614A reference-layout guidance. Keep the PHD thermal pad free of unintended thermal isolation, provide uninterrupted ground-plane copper beneath the package, and connect the pad to the amplifier ground according to the datasheet. Thermal sizing must use sustained output power and the actual music waveform; the 150 W stereo and 300 W mono ratings should not be treated as continuous thermal design points without enclosure verification.
Route class-D switching outputs as short, compact loops and place the recommended output-filter components close to the amplifier pins. Keep sensitive digital and feedback connections away from high-current switching nodes and the exposed pad. Use a continuous ground reference, minimize vias in power paths, and follow the manufacturer's application diagrams. The 36 V power-stage rail should originate from a low-noise, low-output-impedance supply, while the 12 V logic rail requires similarly stable routing.
Design the 36 V supply and local decoupling for the amplifier's transient current rather than its average power. Class-D output current rises sharply with low-impedance speakers and can disturb the logic rail during musical peaks. Follow the datasheet's recommended supply components and application diagrams, verify regulator current margin, and test startup, mute, and overload behavior with the intended speaker load.
Do not substitute parts solely because they are described as Class-D amplifiers. Confirm the 64-pin HTQFP footprint, exact pin assignments, digital-control protocol, supply rails, speaker-load limits, and output-filter requirements before treating a device as a replacement. Also avoid operating below the specified 18 V power-stage supply or above the 38 V maximum, and include protection appropriate to the exposed high-power speaker outputs.
Thông tin tuân thủ
Compliance declarations are not stated in the available product information. The ordering page specifies a 0 C to 70 C commercial temperature range; AEC-Q100 status therefore requires confirmation before automotive use.