TAS5634DDV - 300W Stereo Class-D Power Stage | TI
Référence : TAS5634DDV ✓ ActifTAS5634DDV Présentation
A Class-D power stage is an audio power amplifier that uses pulse-width modulation to deliver energy to loudspeakers efficiently. Within the amplifier hierarchy, it is a power-management IC and semiconductor designed for high-current audio output. Unlike a linear audio amplifier, it reduces power dissipation by switching the output stage between supply rails, making it suitable for high-output home-theater, professional-audio, and multichannel audio systems.
The TAS5634 supports two-channel stereo or single-channel mono operation, giving designers flexibility for multichannel amplification. Its 300 W stereo configuration and 600 W mono configuration operate from a nominal 58 V supply, while the 12 V to 62 V input range accommodates industrial power architectures. The exposed pad beneath the 44-pin HTSSOP package provides the primary thermal path for the high-power switching stage.
The architecture is based on high-efficiency Class-D technology with a PWM signal input. The PWM interface requires a suitable upstream audio processor or PWM-generating modulator rather than a conventional analog line input. Differential PWM inputs allow the device to operate as a bridge-tied output stage, reducing common-mode concerns and supporting transformerless speaker connection when the system design and safety requirements permit it.
Typical uses include powered home-theater speakers, professional monitor speakers, multiway cinema amplifiers, subwoofer amplifiers, and compact high-power audio systems. The stereo configuration serves two full-range or satellite speaker channels, while the mono configuration provides substantially higher output into a lower-impedance subwoofer. A thermal and acoustic design remains essential because high continuous output concentrates heat in the exposed-pad region.
Use the exposed-pad land pattern and thermal via array exactly as shown in the manufacturer datasheet, and place the input, output, supply, and decoupling connections to minimize loop area. The high switching current requires short, wide copper paths, careful supply decoupling, and thermal design that keeps the device within its rated junction-temperature limits. Follow the datasheet guidance for filtering, grounding, and speaker protection.
This product page consolidates the key electrical ratings, package details, application guidance, verified drop-in family options, and practical thermal-layout considerations needed to evaluate the TAS5634DDV before schematic capture and prototype assembly.
Alternatives de remplacement direct pour TAS5634DDV — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
TAS5612LA
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TAS5614LA
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TAS5624A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TAS5634DDV Valeurs maximales et caractéristiques électriques
| Amplifier Type | Class-D audio amplifier power stage |
| Channel Configuration | 1-channel mono or 2-channel stereo |
| Input Signal Type | PWM input |
| Stereo Output Power | 300 W at 6 ohms |
| Mono Output Power | 600 W at 3 ohms |
| Supply Voltage Range | 12 V to 62 V |
| Nominal Supply Voltage | 58 V |
| Output Topology | Differential bridge-tied Class-D output |
| Technology | High-efficiency Class-D |
| Boîtier | 44-pin HTSSOP with exposed pad |
| Package Width | 6.20 mm |
| Type de montage | Surface mount |
| Plage de température de fonctionnement | 0 C to 70 C |
| Evaluation Module | TAS5634EVM |
Guide de configuration des broches du TAS5634DDV 6.20 mm
Configuration des broches du TAS5634DDV (boîtier 6.20 mm). Ce composant de puissance comporte des bornes de grille, de drain et de source. Pour les boîtiers non polarisés, consultez la fiche technique du fabricant pour l'orientation exacte de la broche 1 et les détails de l'empreinte. Les applications courantes incluent la conception d'alimentations, la commande de moteurs et la commutation de charges.
Aucune donnée de brochage détaillée disponible pour TAS5634DDV.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
TAS5634DDV convient pour 6 applications: High-Power Home Theater Amplifier, Professional Monitor Speaker, Subwoofer Power Amplifier, Multichannel Cinema Amplifier, Powered DJ Speaker, Industrial Audio Power System.
High-Power Home Theater Amplifier
The TAS5634DDV fits a high-power home-theater amplifier requiring up to 300 W per stereo channel at 6 ohms with a nominal 58 V supply. Its PWM-input Class-D architecture allows the upstream audio processor to generate the required differential modulation signals directly, while the power stage handles the high-current loudspeaker drive. This integration reduces the need for a separate analog output stage and supports efficient amplification of multiple theater channels. The 12 V to 62 V operating range accommodates suitable industrial-style power rails. Thermal design must support sustained 300 W channel output: place a robust via array beneath the exposed pad, use short and wide supply paths, and select capacitors and output-filter components for the switching current specified by the manufacturer reference design.
Recommandé
Professional Monitor Speaker
TAS5634DDV is suitable for a professional monitor speaker designed around a 300 W stereo power stage or a bridged mono output approaching 600 W at 3 ohms. Its high-efficiency Class-D topology is useful when low heat dissipation and substantial continuous output are required in a compact enclosure. The PWM input path should be driven by a modulator capable of delivering the required differential signal and timing accuracy. Speaker crossover networks, protection devices, and the passive output filter must be designed for the selected impedance and bandwidth. Because the exposed pad is the primary thermal exit, its PCB land pattern and via field should be modeled for the worst-case amplifier temperature rather than only short-duration audition levels.
Recommandé
Subwoofer Power Amplifier
The TAS5634DDV can be used as a mono subwoofer power stage, where its 600 W output capability at 3 ohms provides substantial headroom for a high-impact low-frequency driver. The differential bridge-tied Class-D output should be paired with a filter appropriate for the subwoofer crossover and a speaker-protection network selected for the actual voice-coil impedance. A nominal 58 V supply falls within the device's 12 V to 62 V operating range, but the power supply must also handle transient current demanded by bass reproduction. Thermal copper area and the exposed-pad via array are especially important at low frequencies because sustained bass energy can keep the amplifier dissipating at high levels for extended periods.
Recommandé
Multichannel Cinema Amplifier
TAS5634DDV supports multichannel cinema amplifier architectures where each device can drive a pair of 300 W speakers or one 600 W mono channel. The PWM-input interface is suitable for cinema audio processors that include compatible digital audio decoding and PWM modulation, reducing the need for conventional analog-to-analog power amplification stages. Multiple power stages can be synchronized from a common modulator, although channel-to-channel timing, grounding, and filtering must be evaluated carefully. A 12 V to 62 V supply range offers flexibility in industrial power environments, but every channel requires adequate supply distribution and decoupling. The design should follow the manufacturer layout guidance for exposed-pad cooling, high-current output routing, and input filtering to preserve low distortion across several simultaneous channels.
Recommandé
Powered DJ Speaker
A TAS5634DDV-based powered DJ speaker can use the device in a 300 W stereo configuration for full-range drivers or in a high-power mono configuration for a subwoofer. High-efficiency Class-D operation is advantageous when the speaker must provide high output power without the heat and power consumption associated with a linear amplifier. The system needs a PWM-capable audio source or modulator, balanced input routing to reduce noise pickup, and output filtering matched to the loudspeaker topology. Speaker excursion, sustained thermal load, and the amplifier's 58 V nominal operating point should be considered together because a compact cabinet can limit both heat dissipation and low-frequency cone travel. Use the exposed-pad land pattern and high-current supply layout from the manufacturer design without modification.
Recommandé
Industrial Audio Power System
TAS5634DDV can serve in an industrial audio power system where robust loudspeaker drive, efficient conversion, and a 12 V to 62 V supply range are useful. The device is appropriate for distributed audio, public-address reinforcement, or industrial monitoring systems that require substantially more output than a conventional analog amplifier can deliver efficiently. A system designer must select a modulator and output-filter implementation that meet the required audio bandwidth, distortion, and electromagnetic-emission limits. The 300 W stereo or 600 W mono headline ratings should not be treated as unconditional continuous-output guarantees; actual capability depends on load, supply voltage, thermal design, and the operating mode. The 44-pin exposed-pad package therefore needs a PCB land pattern and heat path designed for the product enclosure and ambient environment.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TAS5634DDV — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TAS5612LA | TAS5614LA | TAS5624A |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 44-pin HTSSOP with exposed pad | 44-pin HTSSOP with exposed pad - same pin-compatible family package | 44-pin HTSSOP with exposed pad - same pin-compatible family package | 44-pin HTSSOP with exposed pad - same pin-compatible family package |
| Amplifier Class | Class-D | Class-D | Class-D | Class-D |
| Input Type | PWM input | PWM input | PWM input | PWM input |
Principaux différenciateurs
- Higher specified output-power capability than the lower members of the same pin-compatible family (vs TAS5612LA)
- Mono and stereo flexibility in one high-power power stage (vs TAS5614LA)
- High-efficiency PWM-input Class-D implementation (vs TAS5624A)
Notes de conception
Treat the exposed pad as the principal thermal path for the high-power Class-D output stage. Implement the datasheet land pattern with a dense array of thermal vias into the power and ground planes, keep the via field free of signal routing, and minimize the thermal resistance from the exposed pad to the enclosure heat sink. Validate the hottest expected ambient condition and sustained output level rather than relying on a short-duration test. Exact thermal limits and via dimensions must be taken from the manufacturer datasheet.
Use short, wide copper paths for the 12 V to 62 V supply rails, output connections, and power-ground returns because the Class-D switching stage can demand high transient current. Place input and output components according to the manufacturer reference circuit and keep switching-current loops compact. The PWM inputs should be routed away from the exposed pad and power-current paths to reduce susceptibility to differential switching noise. Confirm creepage, clearance, and exposed-pad connections against the manufacturer layout guidance.
Do not assume that the headline 300 W stereo or 600 W mono rating applies to every supply voltage, load, channel configuration, or cooling condition. The nominal point is 58 V, while the permitted supply range is 12 V to 62 V. Likewise, the 6-ohm stereo and 3-ohm mono ratings must be respected because lower loads may change thermal or protection behavior. Before layout release, verify output-filter component ratings, speaker protection, amplifier thermal margins, and every absolute maximum limit in the manufacturer datasheet.
Informations de conformité
Compliance attributes were not identified in the available manufacturer, distributor, or evaluation-module information. No assumption has been made about RoHS, REACH, AEC-Q100, lead-free construction, halogen-free status, or conflict-mineral compliance.