Texas Instruments

TAS5634DDV - 300W Stereo Class-D Power Stage | TI

料号: TAS5634DDV ✓ 量产中
12 V to 62 V Vdss 44-pin HTSSOP with exposed pad Package
最小起订量: 1 |

TAS5634DDV 概述

Texas Instruments TAS5634DDV is a high-power Class-D audio amplifier power stage with PWM input, delivering 300 W stereo at 6 ohms or 600 W mono at 3 ohms from a nominal 58 V supply. It supports a 12 V to 62 V supply range and is packaged in a 44-pin HTSSOP with an exposed pad.

A Class-D power stage is an audio power amplifier that uses pulse-width modulation to deliver energy to loudspeakers efficiently. Within the amplifier hierarchy, it is a power-management IC and semiconductor designed for high-current audio output. Unlike a linear audio amplifier, it reduces power dissipation by switching the output stage between supply rails, making it suitable for high-output home-theater, professional-audio, and multichannel audio systems.

The TAS5634 supports two-channel stereo or single-channel mono operation, giving designers flexibility for multichannel amplification. Its 300 W stereo configuration and 600 W mono configuration operate from a nominal 58 V supply, while the 12 V to 62 V input range accommodates industrial power architectures. The exposed pad beneath the 44-pin HTSSOP package provides the primary thermal path for the high-power switching stage.

The architecture is based on high-efficiency Class-D technology with a PWM signal input. The PWM interface requires a suitable upstream audio processor or PWM-generating modulator rather than a conventional analog line input. Differential PWM inputs allow the device to operate as a bridge-tied output stage, reducing common-mode concerns and supporting transformerless speaker connection when the system design and safety requirements permit it.

Typical uses include powered home-theater speakers, professional monitor speakers, multiway cinema amplifiers, subwoofer amplifiers, and compact high-power audio systems. The stereo configuration serves two full-range or satellite speaker channels, while the mono configuration provides substantially higher output into a lower-impedance subwoofer. A thermal and acoustic design remains essential because high continuous output concentrates heat in the exposed-pad region.

Use the exposed-pad land pattern and thermal via array exactly as shown in the manufacturer datasheet, and place the input, output, supply, and decoupling connections to minimize loop area. The high switching current requires short, wide copper paths, careful supply decoupling, and thermal design that keeps the device within its rated junction-temperature limits. Follow the datasheet guidance for filtering, grounding, and speaker protection.

This product page consolidates the key electrical ratings, package details, application guidance, verified drop-in family options, and practical thermal-layout considerations needed to evaluate the TAS5634DDV before schematic capture and prototype assembly.

直接替换替代料: TAS5634DDV ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

TAS5612LA

✅ 直接替换
📦 44-pin HTSSOP with exposed pad
Same manufacturer pin-compatible PWM-input Class-D family, but rated output power differs; TAS5634 is specified for 300 W stereo and 600 W mono versus the lower-power TAS5612LA configuration.

📋 参考替代料(不在目录中)

TAS5614LA

✅ 直接替换
📦 44-pin HTSSOP with exposed pad
Same manufacturer pin-compatible PWM-input Class-D family and 44-pin exposed-pad format, but output-power capability is lower than the 300 W stereo and 600 W mono TAS5634 ratings.

📋 参考替代料(不在目录中)

TAS5624A

✅ 直接替换
📦 44-pin HTSSOP with exposed pad
Same manufacturer pin-compatible PWM-input Class-D family, while the output-power rating is lower than the TAS5634's 300 W stereo and 600 W mono specification.

📋 参考替代料(不在目录中)

TAS5634DDV 最大额定值与电气特性

Amplifier Type Class-D audio amplifier power stage
Channel Configuration 1-channel mono or 2-channel stereo
Input Signal Type PWM input
Stereo Output Power 300 W at 6 ohms
Mono Output Power 600 W at 3 ohms
Supply Voltage Range 12 V to 62 V
Nominal Supply Voltage 58 V
Output Topology Differential bridge-tied Class-D output
Technology High-efficiency Class-D
封装 44-pin HTSSOP with exposed pad
Package Width 6.20 mm
安装类型 Surface mount
工作温度范围 0 C to 70 C
Evaluation Module TAS5634EVM

TAS5634DDV 6.20 mm 引脚配置指南

TAS5634DDV(6.20 mm 封装)的引脚配置。 该功率器件具有栅极、漏极和源极端子。对于无极性封装,请参阅制造商数据手册以了解确切的引脚 1 方向和封装尺寸细节。常见应用包括电源设计、电机驱动和负载开关。

TAS5634DDV 的 6.20 mm 封装引脚图

暂无详细引脚数据: TAS5634DDV.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TAS5634DDV 适用于 6 应用s: High-Power Home Theater Amplifier, Professional Monitor Speaker, Subwoofer Power Amplifier, Multichannel Cinema Amplifier, Powered DJ Speaker, Industrial Audio Power System.

🎧

High-Power Home Theater Amplifier

The TAS5634DDV fits a high-power home-theater amplifier requiring up to 300 W per stereo channel at 6 ohms with a nominal 58 V supply. Its PWM-input Class-D architecture allows the upstream audio processor to generate the required differential modulation signals directly, while the power stage handles the high-current loudspeaker drive. This integration reduces the need for a separate analog output stage and supports efficient amplification of multiple theater channels. The 12 V to 62 V operating range accommodates suitable industrial-style power rails. Thermal design must support sustained 300 W channel output: place a robust via array beneath the exposed pad, use short and wide supply paths, and select capacitors and output-filter components for the switching current specified by the manufacturer reference design.

🔊

Professional Monitor Speaker

TAS5634DDV is suitable for a professional monitor speaker designed around a 300 W stereo power stage or a bridged mono output approaching 600 W at 3 ohms. Its high-efficiency Class-D topology is useful when low heat dissipation and substantial continuous output are required in a compact enclosure. The PWM input path should be driven by a modulator capable of delivering the required differential signal and timing accuracy. Speaker crossover networks, protection devices, and the passive output filter must be designed for the selected impedance and bandwidth. Because the exposed pad is the primary thermal exit, its PCB land pattern and via field should be modeled for the worst-case amplifier temperature rather than only short-duration audition levels.

🎵

Subwoofer Power Amplifier

The TAS5634DDV can be used as a mono subwoofer power stage, where its 600 W output capability at 3 ohms provides substantial headroom for a high-impact low-frequency driver. The differential bridge-tied Class-D output should be paired with a filter appropriate for the subwoofer crossover and a speaker-protection network selected for the actual voice-coil impedance. A nominal 58 V supply falls within the device's 12 V to 62 V operating range, but the power supply must also handle transient current demanded by bass reproduction. Thermal copper area and the exposed-pad via array are especially important at low frequencies because sustained bass energy can keep the amplifier dissipating at high levels for extended periods.

🎬

Multichannel Cinema Amplifier

TAS5634DDV supports multichannel cinema amplifier architectures where each device can drive a pair of 300 W speakers or one 600 W mono channel. The PWM-input interface is suitable for cinema audio processors that include compatible digital audio decoding and PWM modulation, reducing the need for conventional analog-to-analog power amplification stages. Multiple power stages can be synchronized from a common modulator, although channel-to-channel timing, grounding, and filtering must be evaluated carefully. A 12 V to 62 V supply range offers flexibility in industrial power environments, but every channel requires adequate supply distribution and decoupling. The design should follow the manufacturer layout guidance for exposed-pad cooling, high-current output routing, and input filtering to preserve low distortion across several simultaneous channels.

🎤

Powered DJ Speaker

A TAS5634DDV-based powered DJ speaker can use the device in a 300 W stereo configuration for full-range drivers or in a high-power mono configuration for a subwoofer. High-efficiency Class-D operation is advantageous when the speaker must provide high output power without the heat and power consumption associated with a linear amplifier. The system needs a PWM-capable audio source or modulator, balanced input routing to reduce noise pickup, and output filtering matched to the loudspeaker topology. Speaker excursion, sustained thermal load, and the amplifier's 58 V nominal operating point should be considered together because a compact cabinet can limit both heat dissipation and low-frequency cone travel. Use the exposed-pad land pattern and high-current supply layout from the manufacturer design without modification.

🏭

Industrial Audio Power System

TAS5634DDV can serve in an industrial audio power system where robust loudspeaker drive, efficient conversion, and a 12 V to 62 V supply range are useful. The device is appropriate for distributed audio, public-address reinforcement, or industrial monitoring systems that require substantially more output than a conventional analog amplifier can deliver efficiently. A system designer must select a modulator and output-filter implementation that meet the required audio bandwidth, distortion, and electromagnetic-emission limits. The 300 W stereo or 600 W mono headline ratings should not be treated as unconditional continuous-output guarantees; actual capability depends on load, supply voltage, thermal design, and the operating mode. The 44-pin exposed-pad package therefore needs a PCB land pattern and heat path designed for the product enclosure and ambient environment.

推荐产品汇总

TAS5634EVM Evaluation module demonstrating the TAS5634DDV power stage 用于: High-Power Home Theater Amplifier, Professional Monitor Speaker, Subwoofer Power Amplifier, Multichannel Cinema Amplifier, Powered DJ Speaker, Industrial Audio Power System TAS5624A Pin-compatible Texas Instruments Class-D family alternative 用于: High-Power Home Theater Amplifier, Multichannel Cinema Amplifier, Industrial Audio Power System TAS5614LA Pin-compatible Class-D family candidate for lower-power designs 用于: Professional Monitor Speaker, Powered DJ Speaker TAS5612LA Pin-compatible Texas Instruments power-stage family candidate 用于: Subwoofer Power Amplifier
Where can I buy TAS5634DDV online?
TAS5634DDV can be requested through the Request a Quote form on this XAIPART page. The part is a Texas Instruments 44-pin HTSSOP Class-D power stage rated for 300 W stereo or 600 W mono operation. The quote request should include the required quantity, shipment destination, target delivery date, and whether factory reels, cut tape, or another packing format is required.
What is the price of TAS5634DDV?
The current commercial terms for TAS5634DDV are available through the Request a Quote form on this page. Its 300 W stereo and 600 W mono capability makes quantity, packing format, and shipment destination important quotation variables. Request a quote using the exact MPN TAS5634DDV so the manufacturer part, 44-pin HTSSOP package, and associated order details can be confirmed.
What is the lead time for TAS5634DDV?
The current lead time and minimum order quantity for TAS5634DDV should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, factory packing, and the requested delivery schedule. The confirmed order line should identify TAS5634DDV and the 44-pin HTSSOP package because the orderable suffix is significant for procurement.
Is TAS5634DDV in stock?
TAS5634DDV availability should be confirmed through the Request a Quote form on this XAIPART page. The request can state the required quantity and packing method, enabling the current factory position and expected shipment timing to be established for the exact 44-pin HTSSOP orderable part. The device is presented as a Texas Instruments Class-D audio power stage with a 12 V to 62 V operating supply range.
What are the key specifications of TAS5634DDV that engineers should know?
TAS5634DDV is a PWM-input Class-D audio power stage delivering 300 W stereo at 6 ohms or 600 W mono at 3 ohms. According to the Texas Instruments datasheet, its nominal supply voltage is 58 V, its operating supply range is 12 V to 62 V, and it is offered in a 44-pin HTSSOP package with an exposed pad for high-power thermal conduction.
What is the operating voltage of TAS5634DDV?
TAS5634DDV operates from 12 V to 62 V, with 58 V specified as the nominal supply for its headline power ratings. According to the Texas Instruments datasheet, the device supports 300 W stereo output at 6 ohms and 600 W mono output at 3 ohms. The supply design must also accommodate high peak current and the switching losses associated with Class-D operation.
Where can I download the TAS5634DDV datasheet PDF?
The official TAS5634 datasheet is available through the Texas Instruments product and datasheet links on this page. The document covers the TAS5634DDV PWM-input Class-D power stage, including its 44-pin HTSSOP package, 12 V to 62 V supply range, 300 W stereo capability, and 600 W mono capability. Use the manufacturer PDF for the authoritative pin descriptions, application circuit, thermal data, and layout requirements.
Where can I find the TAS5634DDV pinout?
The TAS5634DDV pinout is documented in the pin-description and package-drawing sections of the Texas Instruments manufacturer datasheet. The device uses a 44-pin HTSSOP with an exposed pad, and the exposed pad is a thermal and electrical land feature that must not be left unconnected. Use the datasheet pin table to assign PWM inputs, power rails, grounds, outputs, and exposed-pad connections during schematic capture.
How do I use TAS5634DDV for stereo and mono amplification?
Use TAS5634DDV as a bridge-tied Class-D output stage with PWM inputs, configured for two 300 W channels at 6 ohms in stereo or one 600 W channel at 3 ohms in mono. According to the Texas Instruments datasheet, its nominal operating supply is 58 V within a 12 V to 62 V range. The output filter, differential PWM routing, exposed-pad thermal path, and speaker protection must follow the manufacturer reference design.
TAS5634DDV vs TAS5624A - which is better for a high-power amplifier?
Choose TAS5634DDV when the design specifically requires its 300 W stereo or 600 W mono capability at a nominal 58 V supply. The Texas Instruments material identifies TAS5634 as part of a pin-compatible PWM-input Class-D family that includes TAS5624A, but it does not establish that every electrical rating is identical. Confirm output power, supply limits, protection behavior, and thermal limits in the selected device datasheet before substitution.
What is the difference between TAS5634 and TAS5612LA?
TAS5634 is the 300 W stereo and 600 W mono member of a Texas Instruments PWM-input Class-D power-stage family, while TAS5612LA is a different member of that family. The available manufacturer information establishes family-level pin compatibility but does not provide matching detailed ratings for every parameter. Treat TAS5612LA as a family candidate only until its package, supply range, output power, and thermal limits match the target design.
When should I choose TAS5634DDV over TAS5614LA?
Choose TAS5634DDV when the target system needs the 300 W stereo or 600 W mono capability specified for the TAS5634. The TAS5614LA belongs to the same manufacturer pin-compatible PWM-input Class-D family, but its lower-family output configuration may not satisfy the same power target. Confirm channel count, load impedance, supply voltage, thermal constraints, and exposed-pad layout in the applicable manufacturer datasheet.
Is TAS5634DDV suitable for a professional monitor speaker?
TAS5634DDV is suitable for a professional monitor speaker when its 300 W stereo capability, 6-ohm loading, 58 V nominal supply, and thermal limits fit the design. The manufacturer describes it as a high-power, high-efficiency Class-D power stage. It still requires a suitable PWM modulator, output filtering, loudspeaker protection, stable supply rails, and a PCB thermal design based on continuous output and ambient temperature.
What can replace TAS5634DDV?
TAS5612LA, TAS5614LA, and TAS5624A are the manufacturer-identified drop-in family candidates for TAS5634DDV, and they are listed on this page because they use the same pin-compatible PWM-input Class-D architecture. Their suitability as exact replacements still depends on matching output power, supply range, channel configuration, protection, thermal limits, and exposed-pad layout. Use the Request a Quote form to identify the required orderable suffix and commercial availability.
What is the best cross-brand equivalent for TAS5634DDV?
No verified cross-brand, pin-to-pin equivalent was identified for the TAS5634DDV. Its 44-pin HTSSOP exposed-pad footprint, high-voltage Class-D power stage, PWM input, and 300 W stereo or 600 W mono rating must be matched together before a different manufacturer can be considered a drop-in replacement. Without verified compatibility data, changing brands requires PCB and electrical review rather than a simple substitution.

工程参考数据: TAS5634DDV ——对比、设计指导和合规信息。

选型指南

Choose TAS5634DDV when the design requires a high-efficiency PWM-input Class-D stage capable of 300 W stereo at 6 ohms or 600 W mono at 3 ohms from a nominal 58 V supply. It is appropriate for home-theater, professional monitor, cinema, subwoofer, and industrial audio systems that can use the same pin-compatible power-stage footprint. TAS5612LA is appropriate when its lower output-power capability still satisfies the load and amplifier plan; TAS5614LA fits designs that need less output while retaining the pin-compatible family architecture. TAS5624A is another family option when its specific ratings meet the channel count, supply, thermal, and protection requirements. Before finalizing any substitution, compare the selected device datasheet for load impedance, continuous output, supply range, protection behavior, exposed-pad layout, and operating temperature. The original TAS5634DDV is the clearest choice when the full 300 W stereo or 600 W mono capability is required.

与替代料对比

参数 本产品 TAS5612LA TAS5614LA TAS5624A
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 44-pin HTSSOP with exposed pad 44-pin HTSSOP with exposed pad - same pin-compatible family package 44-pin HTSSOP with exposed pad - same pin-compatible family package 44-pin HTSSOP with exposed pad - same pin-compatible family package
Amplifier Class Class-D Class-D Class-D Class-D
Input Type PWM input PWM input PWM input PWM input

关键差异点

  • Higher specified output-power capability than the lower members of the same pin-compatible family (对比 TAS5612LA)
  • Mono and stereo flexibility in one high-power power stage (对比 TAS5614LA)
  • High-efficiency PWM-input Class-D implementation (对比 TAS5624A)

设计说明

Treat the exposed pad as the principal thermal path for the high-power Class-D output stage. Implement the datasheet land pattern with a dense array of thermal vias into the power and ground planes, keep the via field free of signal routing, and minimize the thermal resistance from the exposed pad to the enclosure heat sink. Validate the hottest expected ambient condition and sustained output level rather than relying on a short-duration test. Exact thermal limits and via dimensions must be taken from the manufacturer datasheet.

Use short, wide copper paths for the 12 V to 62 V supply rails, output connections, and power-ground returns because the Class-D switching stage can demand high transient current. Place input and output components according to the manufacturer reference circuit and keep switching-current loops compact. The PWM inputs should be routed away from the exposed pad and power-current paths to reduce susceptibility to differential switching noise. Confirm creepage, clearance, and exposed-pad connections against the manufacturer layout guidance.

Do not assume that the headline 300 W stereo or 600 W mono rating applies to every supply voltage, load, channel configuration, or cooling condition. The nominal point is 58 V, while the permitted supply range is 12 V to 62 V. Likewise, the 6-ohm stereo and 3-ohm mono ratings must be respected because lower loads may change thermal or protection behavior. Before layout release, verify output-filter component ratings, speaker protection, amplifier thermal margins, and every absolute maximum limit in the manufacturer datasheet.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance attributes were not identified in the available manufacturer, distributor, or evaluation-module information. No assumption has been made about RoHS, REACH, AEC-Q100, lead-free construction, halogen-free status, or conflict-mineral compliance.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

TAS5634DDV datasheet TAS5634DDV pinout TAS5634DDV datasheet pdf TAS5634DDV specifications Texas Instruments TAS5634DDV TAS5634DDV 300W stereo amplifier TAS5634DDV 600W mono TAS5634DDV 12V to 62V supply TAS5634DDV 44-pin HTSSOP TAS5634DDV PWM input TAS5634DDV home theater amplifier TAS5634DDV subwoofer amplifier TAS5634DDV vs TAS5624A TAS5634DDV drop-in replacement TAS5634DDV price

相关元器件 & 术语

Texas Instruments TAS5634DDV TAS5634 TAS5634EVM TAS5612LA TAS5614LA TAS5624A Class-D amplifier audio power amplifier PWM input power stage power-management IC semiconductor bridge-tied output HTSSOP-44 exposed pad surface mount high-efficiency switching 300 W stereo 600 W mono 12 V to 62 V supply 58 V nominal supply audio amplifier loudspeaker drive
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情