Texas Instruments

THS1206IDA - 12-Bit 6 MSPS Quad ADC | Texas Instruments

Référence : THS1206IDA ✗ Fin de vie
Single-supply operation Vdss 32-pin TSSOP (DA) Package
MOQ : 1 |

THS1206IDA Présentation

The Texas Instruments THS1206IDA is a 12-bit, 6 MSPS, configurable four-channel pipelined analog-to-digital converter with simultaneous sampling, 16-word FIFO, automatic channel scan, and a 32-pin TSSOP package. The device accepts four single-ended inputs, two differential inputs, or a combination of differential and single-ended signals, providing flexible acquisition for industrial, communications, and DSP interface systems.

An ADC is an analog-to-digital converter, a data-conversion IC that transforms continuously varying voltage signals into numeric codes for processing, storage, or transmission. Within the broader hierarchy, the THS1206IDA is a high-speed sampling ADC, a data converter, and a signal-chain IC. Its pipeline architecture samples several analog inputs simultaneously, while the integrated FIFO helps isolate the converter from temporary bus or processor delays.

Key features include a resolution of 12 bits, a conversion rate of 6 MSPS, and four configurable analog inputs with simultaneous sampling. The converter includes a 16x FIFO, automatic channel scan, and an interface intended for DSP and microprocessor systems. The family documentation also identifies a single-supply operating mode and low-power operation, making the device suitable for compact acquisition systems where power and board area are constrained.

The pipelined conversion architecture supports sustained sampling rather than relying on a slow successive-approximation process. When all four single-ended channels are sampled, each conversion produces a corresponding 12-bit code for every input. The FIFO provides a finite buffer between sampling and data retrieval, allowing the host processor to service data in bursts. Differential inputs improve rejection of common-mode noise when the source can be arranged as a complementary pair.

Typical applications include four-channel sensor acquisition, vibration and condition monitoring, industrial process control, communications IF measurement, digital oscilloscope and data-logger front ends, and DSP-based signal processing. The four-channel architecture is particularly useful when several sensors must be observed at the same instant, since sequential multiplexing would not preserve phase and amplitude relationships between channels.

When laying out the board, treat the analog input, reference, and power connections as high-priority nets. Keep analog traces short, place input conditioning components close to the converter, and follow the pin-description table in the manufacturer datasheet when assigning package lands. Confirm reference accuracy and input range against the device configuration before setting the analog front-end scaling.

This page organizes the THS1206IDA specifications, replacement options, application guidance, and design considerations in one engineering-focused reference. It also distinguishes the device from broader functional equivalents by focusing on package, pinout, sampling architecture, and converter performance rather than presenting unrelated ADC families as drop-in replacements.

Alternatives de remplacement direct pour THS1206IDA — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec THS1206IDA (même facteur de forme et même empreinte) — différant par Digital Interface, Resolution.

Texas Instruments
Digital Interface: Parallel, DSP / microprocessor compatible
Resolution: 12 bits
Comparer avec THS1206IDA →

THS1206QDAR

✅ Remplacement direct
Texas Instruments
📦 TSSOP-32 (DA)
12 bits · 6 MSPS · 2 or 4 (configurable, simultaneous sampling) · Pipelined CMOS ADC · 4.75 V to 5.25 V (single 5V supply) · 1.5 Vp-p to 3 Vp-p (programmable, single-ended) · Internal 1.5 V or external (REFP/REFM)

Contactez-nous pour le prix

Voir la fiche technique →

THS1206IDAR

✅ Remplacement direct
📦 TSSOP-32 (DA)
Same THS1206 electrical configuration and 32-pin TSSOP land pattern; orderable suffix differs

📋 Alternative de référence (hors catalogue)

THS1206CDAR

✅ Remplacement direct
📦 TSSOP-32 (DA)
Same 32-pin TSSOP footprint and 12-bit 6 MSPS ADC function; commercial temperature-grade distinction requires verification

📋 Alternative de référence (hors catalogue)

THS1206CDARG4

✅ Remplacement direct
📦 TSSOP-32 (DA)
Same THS1206 family function and TSSOP-32 footprint, with commercial-grade and orderable-suffix differences

📋 Alternative de référence (hors catalogue)

THS1206IDA Valeurs maximales et caractéristiques électriques

Résolution 12 bit
Conversion Rate 6 MSPS
Analog Input Channels 4 configurable channels
Single-Ended Inputs 4
Differential Inputs 2
Input Configuration 4 single-ended, 2 differential, or a combination of both
Sampling Method Simultaneous sampling with sample-and-hold
Converter Architecture Pipelined
Integrated FIFO 16 words
Channel Scanning Automatic channel scan
Digital Interface DSP and microprocessor interface
Differential Nonlinearity Error +/-1 LSB
Integral Nonlinearity Error +/-1.5 LSB
Signal-to-Noise and Distortion Ratio 68 dB
Reference Input External reference supported through REFP and REFM
Supply Configuration Single-supply operation
Boîtier 32-pin TSSOP (DA)
Type de montage Surface mount

Guide de configuration des broches du THS1206IDA 32-pin tssop (da)

Configuration des broches du THS1206IDA (boîtier 32-pin tssop (da)). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 32-pin tssop (da) pour le THS1206IDA

Aucune donnée de brochage détaillée disponible pour THS1206IDA.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

THS1206IDA convient pour 6 applications: Multi-Channel Vibration Monitoring, Industrial Sensor Acquisition, Communications IF Measurement, Digital Oscilloscope Front End, DSP Interface and Real-Time Signal Processing, Process Control and Test Systems.

🏭

Multi-Channel Vibration Monitoring

The THS1206IDA fits vibration and condition-monitoring front ends that must compare several sensor channels at the same instant. Its four simultaneously sampled inputs preserve phase and amplitude relationships that would be altered by sequential multiplexing, while the 6 MSPS rate captures transient mechanical events. The 12-bit codes and integrated 16-word FIFO support buffered transfer to a DSP or microprocessor. Use matched input ranges, short analog traces, and the pin-description table in the manufacturer datasheet to maintain channel-to-channel consistency.

🏭

Industrial Sensor Acquisition

The THS1206IDA is suitable for industrial acquisition systems that need pressure, temperature, position, or level signals captured on a common time base. Four configurable channels can support single-ended sensors directly or be paired into two differential inputs where source noise and ground offsets require common-mode rejection. The 6 MSPS throughput provides margin above many sensor bandwidths, while the 16-word FIFO decouples sampling from processor access. Calibrate gain and offset against the external reference arrangement shown in the TI datasheet.

🌐

Communications IF Measurement

The THS1206IDA can serve as the conversion stage in a communications interface or IF measurement system where multiple receiver paths must be observed coherently. Simultaneous sampling helps align channels during modulation analysis, and the 6 MSPS rate supports intermediate-frequency signal capture. Its DSP and microprocessor interface, automatic channel scan, and 16-word FIFO are useful for burst data handling. The analog frontend must keep the IF level, bandwidth, and reference voltage within the selected converter configuration.

📺

Digital Oscilloscope Front End

The THS1206IDA is appropriate for entry-level digital oscilloscope and bench instrument channels that require simultaneous acquisition of two differential inputs or four single-ended inputs. A 6 MSPS sample rate and 12-bit resolution are suitable for repetitive waveform observation where bandwidth demand remains moderate. The automatic channel scan and integrated FIFO simplify deterministic data retrieval, while two differential pairs can simplify differential probing. Apply input attenuation, protection, and bandwidth limiting appropriate to the measured signal.

🖥️

DSP Interface and Real-Time Signal Processing

The THS1206IDA is designed to connect sampling data to DSP or microprocessor systems, making it suitable for real-time filtering, demodulation, or spectrum analysis. The converter supplies 12-bit codes at 6 MSPS, and the 16-word FIFO buffers samples during bursts of host activity. Simultaneous input sampling supports multichannel algorithms that depend on channel alignment. Firmware should account for the configured input mode, reference level, transfer timing, and any channel-scan ordering documented for the selected THS1206 variant.

🔧

Process Control and Test Systems

The THS1206IDA can support automated test and process-control systems that compare several control or monitor signals during each measurement cycle. Simultaneous conversion improves the validity of timing-dependent decisions, and the FIFO prevents sampling activity from stopping while the controller processes an earlier block. The configurable input arrangement allows a board to combine single-ended sensors with differential measurements. For production equipment, protect every analog input against transients and verify the external reference behavior across the required temperature range.

What is the THS1206IDA?
The THS1206IDA is a 12-bit, 6 MSPS, four-channel pipelined ADC from Texas Instruments. It uses simultaneous sampling to capture four single-ended signals, two differential signals, or a combination of both, and includes a 16-word FIFO with automatic channel scanning. According to the TI THS1206 product page, the device also provides an interface for DSP and microprocessor systems and is packaged in a 32-pin TSSOP.
How many analog inputs can the THS1206IDA sample?
The THS1206IDA provides four configurable analog input channels. It can sample four single-ended signals, two differential signals, or a combination of single-ended and differential inputs simultaneously. The TI family description identifies simultaneous sampling as a core capability, which is useful when the relative timing of several sensors must be preserved rather than measured sequentially.
What is the sampling rate and resolution of THS1206IDA?
The THS1206IDA converts at 6 MSPS with 12-bit resolution. The manufacturer describes the THS1206 as a 12-bit, 6 MSPS quad-channel configurable ADC. These ratings make it appropriate for signal acquisition, communications interface, vibration monitoring, and other DSP or microprocessor systems that require multiple simultaneous samples at a moderate sample rate.
What is the best drop-in replacement for THS1206IDA?
THS1206QDA is the closest documented same-family replacement because it retains the 32-pin TSSOP architecture while extending the temperature range; however, its REFOUT tolerance is 8% compared with 1% for the THS1206IDA. Confirm the complete pin description, reference accuracy, temperature grade, and production status in the TI datasheet before treating it as a drop-in replacement.
Can THS1206IDAR replace THS1206IDA on the same PCB?
THS1206IDAR uses the same 32-pin TSSOP device configuration and electrical function as the THS1206IDA, with the suffix distinguishing the orderable packaging arrangement. Because tape-and-reel versus tube handling affects assembly logistics rather than the PCB land pattern, it can generally be used as a board-level alternative. Confirm the exact suffix, pinout, and ordering details in the TI part-details page.
What is the difference between THS1206IDA and THS1206QDA?
The primary documented difference is operating temperature range and reference-output accuracy. A TI E2E discussion states that THS1206QDA remains active with an extended operating-temperature range, but its REFOUT tolerance is 8%, while the THS1206IDA is specified at 1%. THS1206QDA is therefore preferable for wider-temperature systems only after checking reference-dependent measurement accuracy.
When should I choose THS1206IDA over a generic ADC replacement?
Choose the THS1206IDA when the design specifically needs simultaneous sampling of two or four inputs, a 16-word FIFO, automatic channel scan, and a 12-bit output at 6 MSPS. A generic ADC with the same sample rate may not preserve the four-channel simultaneous-sampling arrangement or the FIFO behavior, so a substitute should be evaluated at the pin and system-function level rather than by conversion speed alone.
Is THS1206IDA suitable for vibration and sensor monitoring?
Yes, the THS1206IDA is suitable for multi-sensor and vibration monitoring because its four inputs are sampled simultaneously. This preserves the timing relationship between channels better than sequential multiplexing. Its 6 MSPS rate and 12-bit resolution are appropriate for capturing transient mechanical signals, while the integrated 16-word FIFO helps buffer samples during processor servicing.
Where can I download the THS1206IDA datasheet PDF?
The official THS1206 data sheet is available from the Texas Instruments product document at https://www.ti.com/lit/gpn/THS1206. The manufacturer product page at https://www.ti.com/product/THS1206 provides the device overview, ordering information, and links to supporting documentation. Use the pin-description table and application information in those documents when assigning board lands.
Where is the THS1206IDA pinout located?
The THS1206IDA pinout is published in the pin-configuration section of the manufacturer THS1206 data sheet. The part uses a 32-pin TSSOP package, and the device-specific data should be consulted for exact signal assignments, analog input pairing, reference pins, power pins, and digital interface signals. Do not infer assignments from a generic ADC pinout.
Where can I buy THS1206IDA and check current availability?
Use the Request a Quote form on this page to request current THS1206IDA pricing, stock status, and lead time. The TI part-details page also identifies the device and its orderable variants. Because lifecycle availability can change, request a written confirmation of stock, date code, and obsolete-part handling before scheduling production.
What is the price of THS1206IDA?
Current THS1206IDA pricing is handled through the Request a Quote form on this page rather than through static price text. The form allows quantity, target date, and packaging requirements to be entered so an order confirmation can reflect the appropriate supply channel and any obsolete-part allocation process.
What is the lead time for THS1206IDA?
The current lead time for THS1206IDA should be requested through the Request a Quote form on this page. TI lists the device as part of the THS1206 family, while lifecycle information indicates that the exact IDA ordering option has approached obsolescence. Confirm availability, lot traceability, and delivery timing in the quote response before releasing the production schedule.
Is THS1206IDA currently in stock?
Stock status for THS1206IDA changes by region, quantity, and lifecycle status, so the current answer should come from the Request a Quote form on this page. The part was listed by authorized suppliers with stock, but a distributor listing does not by itself guarantee allocation for a production quantity. Submit the required quantity and target date for confirmation.
What can replace the THS1206IDA?
THS1206QDA is the closest same-family replacement identified for the THS1206IDA because it keeps the 32-pin TSSOP format and extends the operating-temperature range. Its REFOUT tolerance is less favorable, however, so it is not interchangeable in every measurement chain. Other THS1206 orderable suffixes can cover different temperature grades or packing arrangements, subject to footprint and electrical verification.
Is THS1206IDA the same as THS1206IDAR?
THS1206IDAR and THS1206IDA represent closely related orderable versions of the same THS1206 device family in the 32-pin TSSOP package. The main practical difference is the packaging or orderable suffix rather than the conversion function. For a PCB already designed for the DA package, verify the suffix-specific ordering information and obtain the exact pin configuration before placing the purchase order.
What are the key specifications of THS1206IDA that engineers should know?
The key THS1206IDA specifications are 12-bit resolution, a 6 MSPS conversion rate, four configurable analog inputs, simultaneous sampling, and a 16-word FIFO. The device accepts four single-ended or two differential signals, supports automatic channel scan, and uses a 32-pin TSSOP package. TI also lists differential nonlinear error at +/-1 LSB, integral nonlinear error at +/-1.5 LSB, and a 68 dB signal-to-noise and distortion ratio for the device family.
Is there an Analog Devices or Microchip equivalent for THS1206IDA?
Functional equivalents exist in the broader market, but they are not automatically drop-in replacements for the THS1206IDA. The THS1206IDA requires compatibility in the 32-pin TSSOP land pattern, simultaneous four-channel sampling, 12-bit conversion, reference arrangement, digital interface, and FIFO behavior. Parts such as the ADS7042 or MCP3461 may serve similar acquisition functions, but they should not be selected as pin-compatible substitutes without a complete interface and footprint comparison.

Données de référence d'ingénierie pour THS1206IDA — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the THS1206IDA when an existing THS1206IDA board needs a like-for-like component and reference accuracy around 1% is important. The closest same-family production alternative is THS1206QDA, which retains the 32-pin TSSOP format and extends the operating-temperature range, but its 8% REFOUT tolerance can reduce measurement accuracy in reference-dependent designs. THS1206IDAR is appropriate when the suffix and orderable packaging arrangement fit the procurement plan without changing the electrical design. THS1206CDAR and THS1206CDARG4 suit assemblies where the commercial temperature grade and ordering suffix satisfy the environmental requirement. Do not select ADS7042, MCP3461, AD9215, MAX11616, or other functional converters as drop-in options solely from sample rate; their packages, channel counts, resolutions, references, and digital interfaces differ.

Comparaison avec les alternatives

Paramètre Ce produit THS1206QDA THS1206IDAR THS1206CDAR THS1206CDARG4
Package TSSOP-32 (DA) TSSOP-32 (DA) TSSOP-32 (DA) TSSOP-32 (DA) TSSOP-32 (DA)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit
Conversion Rate 6 MSPS 6 MSPS 6 MSPS 6 MSPS 6 MSPS
Analog Inputs 4 single-ended, 2 differential, or combination 4 single-ended, 2 differential, or combination 4 single-ended, 2 differential, or combination 4 single-ended, 2 differential, or combination 4 single-ended, 2 differential, or combination
Integrated FIFO 16 words 16 words 16 words 16 words 16 words
Channel Scan Automatic Automatic Automatic Automatic Automatic

Principaux différenciateurs

  • Simultaneous sampling preserves channel timing relationships (vs THS1206QDA)
  • Closer reference-output tolerance for measurement accuracy (vs THS1206QDA)
  • Integrated buffering reduces host-processing pressure (vs THS1206CDAR)
  • Higher sampling throughput than basic multiplexed converters (vs THS1206CDAR)

Notes de conception

Route each analog input directly to its intended converter pin and keep the input-conditioning network close to the package. When using differential inputs, bring the complementary signals through geometrically similar paths to limit timing and amplitude mismatch. Avoid placing fast digital interface traces beneath the analog inputs or reference connections. Use the pin-configuration diagram in the manufacturer datasheet to confirm analog, reference, supply, ground, and digital-signal assignments on the 32-pin TSSOP land pattern.

Treat the reference as a precision signal rather than a general supply rail. Route REFP and REFM using the topology shown in the TI application information, decouple reference-related nodes locally, and keep switching regulators and fast digital clocks away from the reference network. Differential-input measurements are especially sensitive to common-mode range and source impedance, so verify both conditions before using a higher-gain front end to compensate for a weak source.

Do not substitute on sample rate alone. A candidate must preserve the 32-pin TSSOP footprint, input pairing, reference arrangement, digital interface, and simultaneous-sampling behavior. The THS1206QDA has a documented REFOUT tolerance of 8% compared with 1% for the THS1206IDA, so it can introduce calibration error in reference-dependent measurements. Validate power sequencing, input overvoltage protection, and the FIFO interrupt or data-transfer timing in the system firmware.

Use separate analog and digital supply paths where the board architecture permits, with local high-frequency bypass capacitors at the converter supply pins. Account for the converter's dynamic current while the sampling pipeline and output interface are active, rather than sizing the rail only from standby current. Verify supply ripple, startup sequencing, and the power configuration listed for the exact THS1206 orderable suffix before enabling the analog section.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Compliance declarations were not stated in the available manufacturer or distributor records. AEC-Q100 qualification is not applicable because THS1206IDA is an industrial data-converter IC rather than an automotive-qualified device.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

THS1206IDA datasheet THS1206IDA datasheet pdf THS1206IDA pinout THS1206IDA specifications Texas Instruments THS1206IDA THS1206IDA 32 pin TSSOP THS1206IDA drop-in replacement THS1206IDA vs THS1206QDA THS1206IDA price THS1206IDA buy THS1206IDA lead time THS1206IDA equivalent ADC THS1206 6 MSPS ADC application

Composants & termes associés

Texas Instruments THS1206IDA THS1206 THS1206QDA THS1206IDAR THS1206CDAR THS1206CDARG4 analog-to-digital converter ADC pipelined ADC simultaneous sampling sample-and-hold single-ended input differential input 12-bit resolution 6 MSPS 16-word FIFO automatic channel scan DSP interface microprocessor interface external reference REFP REFM TSSOP-32 surface-mount package
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ