TLE62512G - 1 Mbaud CAN Transceiver | Infineon | Automotive
Référence : TLE62512G ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1 000 | $0 | $0,00 |
TLE62512G Présentation
A CAN transceiver is an interface IC that converts logic-level signals between a host controller and the physical CAN bus. It belongs to the automotive communication-interface hierarchy: CAN controller interface, CAN transceiver, interface IC, and semiconductor. The transceiver handles bus-line signaling, while a separate CAN controller normally handles frame generation, arbitration, error management, and higher-level communication.
Key verified features of the TLE6251-2G family include 1 Mbaud operation, ISO 11898-5 compliance, wake functionality, failure detection, a low-power sleep mode, and ESD protection. These features target automotive and mixed-power-supply HS-CAN systems where low quiescent consumption and defined behavior during power-down are useful. The target is a single 1/1 CAN transceiver rather than a multi-channel CAN controller.
The DSO-14 package supports compact PCB integration, while the electrical interface is intended to connect the transceiver's TX, RX, CANH, and CANL-related system connections to an external bus network. Exact pin names, absolute maximum ratings, supply-voltage limits, loop-delay limits, propagation-delay values, and thermal limits must be taken from the manufacturer datasheet rather than inferred from distributor listings.
Typical applications include automotive ECUs, body-control modules, powertrain controllers, gateway electronics, industrial automation equipment using CAN, and mixed-power HS-CAN networks. In these systems, the transceiver provides the physical-layer interface while the controller manages protocol frames. Select the TLE62512G when the design specifically requires the verified Infineon 1 Mbaud CAN interface and its listed wake, failure-detection, sleep, ESD, and ISO 11898-5 features.
Before layout is finalized, verify the complete pinout, recommended external components, bus termination, supply sequencing, and transceiver operating modes in the manufacturer documentation. Do not substitute a similar CAN device without checking pin compatibility, bus timing, standby behavior, failure reporting, and package details.
Alternatives de remplacement direct pour TLE62512G — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
TLE62512GXUMA1
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TLE62512GXUMA3
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TLE62512GS
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TLE6251-2G
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TLE62512G
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →TLE62512G Spécifications
| Product Type | High-speed CAN transceiver |
| CAN Data Rate | 1 Mbaud |
| CAN Interface | 1/1 CAN transceiver |
| Compliance | ISO 11898-5 compliant |
| Wake Function | Wake capability |
| Failure Detection | Failure detection capability |
| Sleep Mode | Low-power sleep mode |
| ESD Protection | ESD protection |
| Power-Down Behavior | Excellent passive behavior in power-down |
| Boîtier | DSO-14 |
| Package Type | Surface-mount DSO |
Guide de configuration des broches du TLE62512G surface-mount dso
Configuration des broches du TLE62512G (boîtier surface-mount dso). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour TLE62512G.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
TLE62512G convient pour 6 applications: Automotive Electronic Control Units, Vehicle Body-Control Modules, Industrial CAN Automation, CAN Gateway Modules, Mixed-Power-Supply HS-CAN Networks, Diagnostic and Test Equipment.
Automotive Electronic Control Units
The TLE62512G fits an automotive ECU that connects a CAN controller to a high-speed CAN bus. Its verified 1 Mbaud capability supports the physical layer used for body, comfort, gateway, and powertrain-related communication designs. The wake function helps a node react to bus activity, while failure detection gives the controller a diagnostic signal when the interface detects a bus-related problem. The DSO-14 package also keeps the physical interface compact. Before layout, confirm the exact pinout, external termination requirements, EMC layout, and supply values from the Infineon datasheet.
Recommandé
Vehicle Body-Control Modules
A body-control module can use the TLE62512G as the high-speed CAN physical interface for distributed vehicle functions such as centralized gateway communication, lighting control, door systems, and climate-control coordination. The 1 Mbaud rate and wake capability match the family’s intended HS-CAN use, while low-power sleep mode is valuable when the vehicle must reduce standby consumption. The interface does not replace the CAN protocol controller; it translates between controller I/O and CAN bus signaling. Verify transceiver timing, fault behavior, and all package pins before schematic release.
Recommandé
Industrial CAN Automation
The TLE62512G can serve as the CAN physical-layer device in industrial automation equipment that uses a CAN controller to connect sensors, drives, remote I/O, or service equipment. Its 1 Mbaud rate supports high-speed CAN communication, while wake and sleep functions can help manage inactive network periods. The interface should be placed according to the manufacturer’s bus-layout recommendations, with attention to termination, common-mode behavior, ESD protection, and grounding. Because industrial systems may use different bus lengths and fault conditions, verify the full electrical limits before selecting the device.
Recommandé
CAN Gateway Modules
A gateway module can use the TLE62512G as a single CAN transceiver interface when it needs a high-speed CAN physical connection alongside another communication or processing section. The family’s 1 Mbaud specification, wake capability, failure detection, and sleep operation are useful for gateways that may remain connected to a mixed-power HS-CAN network. The transceiver should be paired with a controller whose timing and termination expectations match the bus. Keep the CAN traces short and controlled, provide the specified bus protection and bypass components, and confirm that the exact DSO-14 variant is used.
Recommandé
Mixed-Power-Supply HS-CAN Networks
The TLE62512G is specifically associated by Infineon documentation with mixed-power-supply high-speed CAN networks. The family listing highlights excellent passive behavior during power-down, which helps a node avoid inappropriate bus activity while its local supply is transitioning or unavailable. That behavior is important when different portions of a vehicle or industrial system use separate supply domains. The design still requires correct enable/standby sequencing, bus termination, supply decoupling, and EMC layout. Confirm the exact operating-mode truth table and power-down electrical limits in the manufacturer documentation.
Recommandé
Diagnostic and Test Equipment
The TLE62512G can be used in CAN diagnostic equipment or test fixtures that need a deterministic physical interface to a high-speed CAN network. The 1 Mbaud rate supports standard HS-CAN test traffic, while wake and failure detection help the fixture exercise low-power and error-related operating conditions. The device is only the physical interface, so the test system also needs a CAN controller, bus termination, instrumentation, and software that generates and validates frames. Use isolated test arrangements when the target network can have ground-potential differences.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TLE62512G — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TLE62512GXUMA1 | TLE62512GXUMA3 | TLE6251-2G | TLE62512GS |
|---|---|---|---|---|---|
| Product Type | High-speed CAN transceiver | High-speed CAN transceiver | High-speed CAN transceiver | High-speed CAN transceiver | High-speed CAN transceiver family reference |
| Package | DSO-14 | PG-DSO-14-24 | PG-DSO-14 | DSO-14 family package | DSO-14 family reference |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
Principaux différenciateurs
- Verified high-speed CAN rate (vs Generic CAN transceiver with unspecified rate)
- Power-down behavior (vs Generic transceiver without verified passive power-down)
- Diagnostic and low-power features (vs Basic CAN transceiver without verified wake or failure detection)
- Package-family continuity (vs Cross-package CAN transceiver)
Notes de conception
Place the TLE62512G close to the CANH and CANL connector or bus entry, and keep the CAN bus traces short, symmetrical, and continuous. Follow the Infineon recommended CAN transceiver layout for termination, common-mode return, and protection components. Do not route high-current power paths between the bus connector and transceiver because inductive spikes can degrade communication margin.
Use the exact supply and decoupling values from the manufacturer datasheet; the verified search excerpts do not provide them. Confirm the transceiver’s normal, sleep, and power-down sequencing so the CAN bus remains passive when the local supply is unavailable. This is particularly important in mixed-power-supply HS-CAN networks, where multiple nodes can be powered from different domains.
Do not treat a related distributor suffix as automatically interchangeable with TLE62512G. Before PCB release, compare the exact ordering code against the Infineon package drawing and pinout, then verify supply voltage, timing, sleep current, wake behavior, failure-detection signaling, and ESD ratings. A package-compatible appearance alone does not establish pin-to-pin or system-level compatibility.
Informations de conformité
The verified data confirms ISO 11898-5 compliance and ESD protection for the Infineon TLE6251-2G family, but it does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Confirm these items in the current manufacturer documentation.
