Texas Instruments

TLV2334IN - 525 kHz Quad CMOS Op Amp | Texas Instruments

Référence : TLV2334IN ✓ Actif
5 V Vdss 2.0 µA Id 14-pin plastic DIP Package
MOQ : 1 |

TLV2334IN Présentation

The Texas Instruments TLV2334IN is a quad, general-purpose CMOS operational amplifier with a 525 kHz gain-bandwidth product, 0.4 V/µs slew rate, 60 dB CMRR, and approximately 2.0 µA input bias current. The device is packaged in a 14-pin plastic DIP and provides four amplifiers per package, making it suitable for compact analog signal-processing systems.

A CMOS operational amplifier is a voltage-amplifying semiconductor device that uses complementary metal-oxide-semiconductor circuitry to process differential signals. Operational amplifiers form the basic building blocks of analog signal chains, where they perform functions such as buffering, amplification, filtering, level shifting, and active feedback control. A quad package consolidates four amplifiers while sharing common supply and ground connections.

The TLV2334IN combines a 525 kHz gain-bandwidth product with a 0.4 V/µs slew rate, allowing moderate-frequency small-signal amplification without the bandwidth of a high-speed precision amplifier. Its approximately 2.0 µA input bias current is suitable for many battery-powered and high-impedance sensing circuits. The 60 dB CMRR specification supports rejection of common-mode interference when signal levels are small relative to the supply rails.

According to the manufacturer’s LinCMOS documentation, the family is characterized for 3 V and 5 V single-supply operation and supports supply ranges extending to 8 V over the specified temperature range. The common-mode input range extends below the negative supply rail, while the output range includes negative voltage operation. These rail-related characteristics make the device useful in single-supply circuits that process signals centered near ground.

Typical uses include low-frequency sensor conditioning, active audio paths, sample-and-hold circuitry, transducers, and general instrumentation. Four amplifiers in one package reduce board area when a design needs several similar signal-conditioning channels. For applications requiring greater precision or substantially higher bandwidth, the selection should be revisited because the 525 kHz gain-bandwidth product and 60 dB CMRR define a general-purpose rather than precision or high-speed role.

When designing a board around this device, bypass each supply connection with local high-frequency decoupling and route sensitive input and feedback paths away from switching nodes. Because the common-mode and output ranges are rail-dependent, verify the actual signal excursion against the chosen supply voltage before relying on near-rail input or output operation.

This page combines the exact ordering information, electrical characteristics, package details, application guidance, and drop-in replacement assessment for the TLV2334IN. It is intended to help engineers distinguish genuine footprint-compatible options from functionally similar amplifiers that would require board or schematic changes.

Alternatives de remplacement direct pour TLV2334IN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

TLV2334INE4

✅ Remplacement direct
📦 14-PDIP
Same TLV2334 family and 14-pin plastic-DIP footprint; no verified numeric electrical difference was stated, so the match is rated conservatively at 90% rather than 100%.

📋 Alternative de référence (hors catalogue)

TLV2334IN Valeurs maximales et caractéristiques électriques

Amplifier Type General-purpose operational amplifier
Number of Amplifiers 4 circuits
Technology LinCMOS
Gain-Bandwidth Product 525 kHz
Slew Rate 0.4 V/µs
Common-Mode Rejection Ratio 60 dB
Input Bias Current 2.0 µA
Nominal Supply Voltage 5 V
Fully Characterized Single-Supply Operation 3 V and 5 V
Maximum Stated Supply Range 8 V
Plage de température de fonctionnement -40 °C to +85 °C
Boîtier 14-pin plastic DIP
Nombre de broches 14 pins
Type de montage Through-hole
Lead Spacing 7.62 mm
Common-Mode Input Voltage Range Extends below the negative rail and up to VDD
Plage de tension de sortie Includes negative output voltage

Guide de configuration des broches du TLV2334IN 14-pin plastic dip

Configuration des broches du TLV2334IN (boîtier 14-pin plastic dip). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 14-pin plastic dip pour le TLV2334IN

Aucune donnée de brochage détaillée disponible pour TLV2334IN.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

TLV2334IN convient pour 6 applications: Low-Frequency Sensor Conditioning, Portable Audio Input Path, Industrial Control Signal Interface, Active Filter and Oscillator, Data Acquisition Front End, Power Supply Feedback and Monitoring.

🧩

Low-Frequency Sensor Conditioning

The TLV2334IN is appropriate for conditioning outputs from moderate-impedance sensors because its approximately 2.0 µA input bias current limits the bias-related voltage error in many sensor interfaces. Four amplifiers can support buffering, gain, active filtering, and output offset stages within one 14-pin plastic DIP. The 525 kHz gain-bandwidth product and 0.4 V/µs slew rate are adequate for low-frequency signals, while 3 V and 5 V single-supply operation simplifies portable instrumentation. Confirm the sensor output range, permissible common-mode voltage, and required noise performance before finalizing the circuit.

🎧

Portable Audio Input Path

The TLV2334IN can support low-frequency audio buffering, tone shaping, and active filtering in portable equipment powered from a 3 V or 5 V rail. Its four amplifiers provide separate channels or multiple gain and filtering stages, while the approximately 2.0 µA input bias current is useful with high-impedance audio sources. The 0.4 V/µs slew rate and 525 kHz gain-bandwidth product favor general audio conditioning rather than wideband audio amplification. Validate output swing, capacitive-load stability, and channel-to-channel matching against the intended headphone or line-level interface.

🏭

Industrial Control Signal Interface

The TLV2334IN is suitable for low-bandwidth industrial control interfaces that require multiple buffered channels, single-supply operation, and through-hole assembly. A quad amplifier can implement input conditioning, error amplification, active filtering, and output buffering while sharing one 14-pin package. Its 60 dB CMRR helps reject common-mode noise on modest-signal sensor and control paths, while the common-mode range extending below the negative rail supports systems whose signals sit near ground. The design must still account for supply transients, grounding, and the difference between signal bandwidth and the amplifier’s 525 kHz gain-bandwidth product.

🔧

Active Filter and Oscillator

The TLV2334IN can implement active low-pass filters, integrators, and quadrature oscillators because four amplifiers are available in one package. Its 0.4 V/µs slew rate and 525 kHz gain-bandwidth product permit operation at frequencies below the amplifier’s small-signal bandwidth, with practical limits determined by component tolerances, output loading, and loop stability. The approximately 2.0 µA input bias current is helpful when high-value timing resistors are used, although it may require bias-current compensation for precision waveforms. Evaluate resistor accuracy and capacitor stability when the oscillator frequency or filter response must remain tightly controlled.

📺

Data Acquisition Front End

The TLV2334IN can form the analog front end of a moderate-speed data-acquisition system by providing channel buffering, gain, and active filtering for sensors or dividers. Its four amplifiers reduce the number of packages needed for four similar conditioning paths, and the 14-pin plastic DIP supports through-hole prototypes and industrial-style assemblies. The 525 kHz gain-bandwidth product gives substantial margin over many slow sensor-bandwidth signals, while 60 dB CMRR improves common-mode rejection. Designers should account for settling behavior, source impedance, ADC input capacitance, and any required conversion-time headroom.

⚡

Power Supply Feedback and Monitoring

The TLV2334IN can monitor multiple power rails or amplify error signals in a low-voltage supervisory system. Four amplifiers may implement differential sensing, gain stages, filters, and threshold amplifiers while operating from 3 V or 5 V. The common-mode input capability near or below the negative rail is useful for low-side sensing, although each input must remain within the device’s permitted common-mode range. The approximately 2.0 µA input bias current can create offsets in high-impedance dividers, so resistor values should be selected accordingly, and the 525 kHz gain-bandwidth product should not be confused with a guaranteed transient response.

What is the TLV2334IN?
The TLV2334IN is a Texas Instruments quad CMOS operational amplifier with four general-purpose amplifiers in one 14-pin plastic DIP. According to the manufacturer documentation, it combines a 525 kHz gain-bandwidth product, a 0.4 V/µs slew rate, approximately 2.0 µA input bias current, and 60 dB CMRR. It is intended for low-frequency signal buffering, amplification, filtering, and general instrumentation.
What are the key specifications of TLV2334IN that engineers should know?
The TLV2334IN provides four amplifiers, a 525 kHz gain-bandwidth product, 0.4 V/µs slew rate, 60 dB CMRR, and approximately 2.0 µA input bias current. The manufacturer describes 3 V and 5 V single-supply operation as fully characterized and states that the supply range extends to 8 V over the specified temperature range. The device is packaged in a 14-pin plastic DIP for through-hole assembly.
What is the operating voltage of TLV2334IN?
The TLV2334IN is fully characterized for 3 V and 5 V single-supply operation. According to the LinCMOS family documentation, the supported supply range extends to 8 V over the specified temperature range, with 3 V and 5 V explicitly characterized. The nominal operating point commonly associated with this device is 5 V, but a circuit should not assume 5 V is the only usable supply condition.
What is the gain-bandwidth product and slew rate of TLV2334IN?
The TLV2334IN has a 525 kHz gain-bandwidth product and a 0.4 V/µs slew rate. According to the manufacturer datasheet, these values place it in the general-purpose, low-to-moderate-frequency class rather than the high-speed precision class. At a closed-loop gain of 10, the gain-bandwidth product indicates approximately 52.5 kHz of small-signal bandwidth before other circuit limitations are evaluated.
Is TLV2334IN suitable for single-supply battery applications?
Yes, the TLV2334IN can suit single-supply battery-powered designs because the family supports 3 V and 5 V single-supply operation and has approximately 2.0 µA input bias current. Its common-mode input range extends below the negative rail, which is useful when signals remain near ground. The complete operating current, output-load capability, and battery-life impact should still be checked against the system load.
Where can I download the TLV2334IN datasheet PDF?
The TLV2334IN datasheet can be obtained through the linked manufacturer-document reference or the datasheet landing page shown in the product sources. The document is titled “LinCMOS Low-Voltage Medium-Power Operational Amplifiers.” Use the pin-description table, typical-characteristics plots, and recommended operating conditions in that document when assigning PCB functions and validating the final design.
Where can I find the TLV2334IN pinout?
The TLV2334IN uses a 14-pin plastic DIP, and its authoritative pin descriptions are located in the pin-configuration section of the manufacturer datasheet. Use that table when numbering the through-hole footprint and assigning inputs, outputs, supply rails, and no-connect positions. The online package diagram associated with this page provides the physical 14-pin outline, while the manufacturer document remains the controlling source for individual pin names.
What is the difference between TLV2334IN and TLV2334INE4?
The TLV2334IN is the standard 14-pin plastic-DIP ordering code, while TLV2334INE4 is a separately listed ordering variant. Both are associated with the same quad low-voltage operational-amplifier family and the same through-hole footprint, making the INE4 device the supported drop-in candidate identified for comparison. Final procurement should confirm the exact temperature grade, marking, and lifecycle requirements against the manufacturer ordering information.
What can replace TLV2334IN on the same PCB?
The TLV2334INE4 is the clearest drop-in replacement candidate identified for the TLV2334IN because it belongs to the same TLV2334 family and retains the 14-pin plastic-DIP footprint. It can therefore preserve the existing through-hole layout, but engineers should verify the exact electrical grade and temperature qualification before substitution. A functionally equivalent amplifier in a different package is not a PCB drop-in replacement.
When should I choose TLV2334IN over another quad op amp?
Choose the TLV2334IN when the design needs four general-purpose amplifiers, approximately 2.0 µA input bias current, operation from a 3 V or 5 V single supply, and a 14-pin plastic DIP assembly. Its 525 kHz gain-bandwidth product and 60 dB CMRR are appropriate for modest-bandwidth conditioning tasks. Select a different amplifier when the circuit requires substantially higher bandwidth, tighter offset accuracy, lower noise, or rail-to-rail output capability.
Is TLV2334IN suitable for sensor-conditioning applications?
The TLV2334IN is suitable for many low-frequency sensor-conditioning applications because it combines approximately 2.0 µA input bias current with single-supply operation and a common-mode input range extending below the negative rail. A high-impedance sensor may interact with input bias current and input capacitance, so verify the sensor’s source impedance and required settling time. The amplifier is best suited to bandwidth and accuracy needs compatible with 525 kHz gain-bandwidth product.
Does TLV2334IN need protection for dual-supply operation?
The TLV2334IN is intended primarily for low-voltage single-supply operation, with 3 V and 5 V explicitly characterized and the documented supply range extending to 8 V. A dual ±5 V arrangement would place substantially more voltage across the device than the low-voltage family is characterized for. Do not infer ±5 V suitability from the negative common-mode capability; derive the operating rails from the manufacturer’s absolute-maximum and recommended conditions.
How should I decouple the TLV2334IN power supply?
Place a small ceramic bypass capacitor close to the positive supply and ground pins, and provide effective bulk capacitance near the device. Keep the high-frequency bypass path short because lead inductance can convert switching current into supply voltage spikes at the amplifier pins. A single package contains four amplifiers sharing common power connections, so one carefully positioned bypass capacitor generally serves the package better than several widely separated capacitors.
What is the TLV2334IN price?
Pricing for the TLV2334IN changes with quantity, market conditions, and supplier inventory, so a static price figure can become inaccurate quickly. Use the Request a Quote form on this page to request current pricing for the exact 14-pin plastic-DIP ordering code. Provide the required quantity, target delivery date, and acceptable packaging details so the quotation reflects the intended production requirement.
Where can I buy TLV2334IN and check its lead time?
Use the Request a Quote form on this page to request current TLV2334IN availability, quantity breaks, and lead time for the exact ordering code. The request should identify the required quantity and whether production needs a 14-pin plastic-DIP reel, tube, or other approved shipping configuration. Current lifecycle and shipment timing should be confirmed with the quote response because both can change after a page is published.

Données de référence d'ingénierie pour TLV2334IN — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the TLV2334IN for through-hole designs that need four general-purpose, low-power CMOS amplifiers operating from 3 V or 5 V. It is particularly useful when the signal source can be moderately high impedance, the common-mode signal sits near ground, and approximately 2.0 µA input bias current is desirable. Its 525 kHz gain-bandwidth product and 0.4 V/µs slew rate suit low-frequency conditioning rather than precision measurement or wideband acquisition. TLV2334INE4 is the closest identified drop-in candidate because it retains the same family and 14-pin plastic-DIP footprint, but confirm its grade-specific electrical and temperature limits before substitution. If the design needs rail-to-rail output, substantially lower offset, greater CMRR, lower noise, or more bandwidth, choose a more specialized amplifier rather than forcing the TLV2334IN beyond its intended performance class.

Comparaison avec les alternatives

Paramètre Ce produit TLV2334INE4
Package 14-PDIP 14-PDIP
Brand Texas Instruments Texas Instruments
Number of Amplifiers 4 circuits 4 circuits
Amplifier Type General-purpose operational amplifier General-purpose operational amplifier
Mounting Type Through-hole Through-hole
Number of Pins 14 pins 14 pins

Principaux différenciateurs

  • Four integrated amplifiers in one through-hole package (vs TLV2334INE4)
  • Low input bias current for general-purpose signal conditioning (vs TLV2334INE4)
  • Single-supply operation with near-ground input capability (vs TLV2334INE4)

Notes de conception

Place the primary bypass capacitor directly between the positive supply and ground pins, with its ground return connected to the same quiet ground region. Keep this loop short because package and trace inductance can create supply spikes at the operating amplifier. A larger bulk capacitor near the power entry point can support lower-frequency transients, while the local ceramic capacitor handles higher-frequency demand from the four internal amplifiers.

Route each non-inverting input directly to its source and each inverting feedback path close to the corresponding amplifier pins. Avoid sharing narrow feedback traces between channels because capacitive coupling through the board can create crosstalk. Where the TLV2334IN conditions low-level signals, maintain a continuous ground reference under the DIP and keep switching-regulator traces, inductors, and high-current outputs away from the input and feedback nodes.

Do not assume that the ability to accept input signals below the negative rail permits a dual ±5 V supply. The documented supply range extends to 8 V, with 3 V and 5 V single-supply operation explicitly characterized. Check the absolute-maximum supply rating, input and output excursions, and power-up sequence in the manufacturer datasheet before applying a ±5 V rail or driving an input beyond the linear common-mode region.

Calculate the usable closed-loop bandwidth from the 525 kHz gain-bandwidth product rather than treating that value as a guaranteed flat-bandwidth specification. For a noise-gain setting of 10, the theoretical small-signal bandwidth is approximately 52.5 kHz before noise gain, stability, and loading effects are considered. Check source impedance, feedback resistance, capacitive loading, and output-swing requirements when the signal bandwidth approaches that range.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for TLV2334IN in the cited product information.

Recherches associées

TLV2334IN datasheet TLV2334IN pinout TLV2334IN datasheet pdf TLV2334IN specifications TLV2334IN 14-PDIP TLV2334IN 525 kHz TLV2334IN 0.4 V/us TLV2334IN equivalent TLV2334IN replacement TLV2334IN vs TLV2334INE4 TLV2334IN price TLV2334IN stock Texas Instruments TLV2334IN TLV2334IN application circuit

Composants & termes associés

Texas Instruments TLV2334IN TLV2334INE4 quad operational amplifier CMOS operational amplifier LinCMOS general-purpose amplifier analog signal chain gain-bandwidth product slew rate common-mode rejection ratio CMRR input bias current single-supply operation common-mode input voltage range 3 V power supply 5 V power supply 14-PDIP 14-pin plastic DIP through-hole package surface-mount sensor conditioning active filter data acquisition portable audio
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ