Texas Instruments

TLV2460ID - 6V, 6.4MHz RRIO Op Amp with Shutdown | Texas Instruments

Référence : TLV2460ID ✓ Actif
6 V Vdss SOIC (D) Package
MOQ : 1 |

TLV2460ID Présentation

The Texas Instruments TLV2460ID is a single, 6 V, 6.4 MHz rail-to-rail input and output operational amplifier with shutdown capability, packaged in an 8-pin SOIC. It is designed for low-power, general-purpose signal conditioning and provides rail-to-rail input and output operation for portable instrumentation, sensor interfaces, audio signal paths, and embedded analog systems. The TLV2460ID supports an operating temperature range of -40°C to +125°C.

An operational amplifier is an analog active device that uses high open-loop gain to amplify the difference between two input voltages. Rail-to-rail input capability allows the input common-mode voltage to approach the supply rails, while rail-to-rail output capability improves output swing in low-voltage systems. The TLV2460 belongs to the broader hierarchy of integrated circuits, analog amplifiers, voltage amplifiers, and general-purpose operational amplifiers.

The main differentiating feature of the TLV2460ID is its shutdown function, which allows the circuit to reduce operating current when the analog section is not required. Its 6.4 MHz gain-bandwidth product supports applications that need higher signal bandwidth than a basic micropower amplifier. The device is identified as a single amplifier with one shutdown control, making it suitable for designs requiring one analog channel rather than a dual or quad amplifier.

The TLV2460ID is used where a designer needs a compact, low-power amplifier with flexible input and output range. It can interface with sensors, buffer voltage references, perform active filtering, amplify audio or control signals, and condition inputs for higher-resolution converters. Its rail-to-rail behavior is particularly useful in systems powered from a single low-voltage rail, where conventional input and output ranges would leave insufficient headroom.

When using the TLV2460ID, connect bypass capacitors close to the supply pins and keep feedback-resistor networks compact to minimize parasitic capacitance and instability risk. The shutdown pin should be driven with a defined logic level whenever the amplifier state matters. Verify input and output signal limits against the supply voltage, especially during startup, shutdown transitions, and transients. The 8-pin SOIC package supports standard surface-mount assembly and hand-soldering workflows.

This page combines manufacturer and distributor references with drop-in replacement guidance, parameter comparisons, application notes, and practical PCB considerations for engineers evaluating the TLV2460ID in low-voltage analog designs.

Alternatives de remplacement direct pour TLV2460ID — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

TLV2460CDR

✅ Remplacement direct
📦 SOIC-8
Same TLV2460 family and SOIC-8 footprint; primary performance ratings are reported as equivalent, with only ordering and qualification details requiring review

📋 Alternative de référence (hors catalogue)

TLV2460AQDRG4

✅ Remplacement direct
📦 SOIC-8
Same TLV2460 family and SOIC-8 footprint; automotive-grade ordering option versus the standard TLV2460ID

📋 Alternative de référence (hors catalogue)

TLV2460ID Valeurs maximales et caractéristiques électriques

Number of Amplifiers 1 amplifier
Tension d'alimentation 6 V
Gain-Bandwidth Product 6.4 MHz
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Shutdown Function Yes
Amplifier Type General-purpose operational amplifier
Plage de température de fonctionnement -40°C to +125°C
Package Type SOIC (D)
Nombre de broches 8 pins
Maximum Power Dissipation 710 mW
Minimum Dual Supply Voltage ±1.35 V
Maximum Dual Supply Voltage ±3 V
Type de montage Surface mount

Configuration des broches de TLV2460ID

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Broche 1 OUT — Amplifier output
Broche 2 IN- — Inverting input
Broche 3 IN+ — Non-inverting input
Broche 4 V- — Negative supply connection
Broche 5 SHDN — Shutdown control input
Broche 6 V+ — Positive supply connection
Broche 7 NC — Not connected (per datasheet)
Broche 8 OUT — Amplifier output

Applications typiques

TLV2460ID convient pour 6 applications: Low-Voltage Sensor Signal Conditioning, Active Filtering and Signal Conditioning, Portable Measurement and Test Equipment, Audio and Communication Interface Buffering, Battery-Powered IoT and Edge Sensing, Automotive and Industrial Analog Conditioning.

🧩

Low-Voltage Sensor Signal Conditioning

The TLV2460ID fits sensor front ends where the signal may occupy much of the available input range. Its rail-to-rail input characteristic allows the amplifier to accept signals near the supply rails, and the 6.4 MHz gain-bandwidth product provides headroom for moderate-bandwidth conditioning stages. Place the device close to the sensor or connector, use short input traces, and bypass the supply pins locally to reduce pickup. When the sensor is sampled intermittently, the shutdown function can reduce consumption between measurements.

📡

Active Filtering and Signal Conditioning

Use the TLV2460ID for first- or second-order active filters in low-voltage instrumentation systems. Its rail-to-rail output capability helps preserve signal swing near the supply limits, while the 6.4 MHz gain-bandwidth product supports filter designs requiring reasonable closed-loop bandwidth. Keep the feedback resistors and capacitors close together to minimize parasitic capacitance, and verify phase margin with the amplifier’s datasheet models. Stable resistor values and adequate bypass capacitance are especially important at the higher end of the useful frequency range.

🔧

Portable Measurement and Test Equipment

The TLV2460ID is appropriate for handheld or bench measurement equipment powered from a low-voltage rail. Rail-to-rail input and output operation reduces headroom constraints, while the shutdown control allows the analog channel to be disabled when the instrument is idle. A 710 mW maximum power-dissipation rating provides a defined thermal limit for the package, although actual consumption is normally lower. Use the shutdown logic with care during power-up, and place local bypass capacitors at the supply pins.

🎧

Audio and Communication Interface Buffering

The TLV2460ID can buffer small-signal audio or communication nodes where rail-to-rail operation and a modest bandwidth are more important than very low distortion specifications. The 6.4 MHz gain-bandwidth product is sufficient for many low-frequency audio paths, but the application must remain within the amplifier’s output-current and capacitive-load limits. Keep feedback loops compact and isolate the output from long cable runs. The shutdown pin is useful in portable equipment where the channel is not continuously active.

🧩

Battery-Powered IoT and Edge Sensing

In battery-powered edge sensing, the TLV2460ID combines a single-amplifier configuration, rail-to-rail signal handling, and shutdown capability in a compact 8-pin SOIC package. The shutdown control can be asserted during idle periods to reduce system demand, while the amplifier provides a simple interface for resistive sensors, thermistors, or low-level analog nodes. The 6.4 MHz bandwidth is more than adequate for many sensor signals, but supply current and shutdown timing should be evaluated at the system level to maximize battery life.

🚗

Automotive and Industrial Analog Conditioning

The TLV2460AQDRG4 provides an automotive-qualified member of the same TLV2460 family for designs that require the SOIC-8 footprint and the family’s rail-to-rail amplifier characteristics. It is useful for low-level analog conditioning, actuator interfaces, and sensor buffering where temperature and qualification requirements are stricter. Verify the exact automotive qualification, temperature grade, and production requirements in the manufacturer documentation. For non-automotive industrial systems, TLV2460CDR is the closer same-family alternative identified.

Récapitulatif des produits recommandés

TLV2460CDR Same-family SOIC-8 amplifier alternative Utilisé dans : Low-Voltage Sensor Signal Conditioning, Active Filtering and Signal Conditioning, Portable Measurement and Test Equipment, Audio and Communication Interface Buffering, Battery-Powered IoT and Edge Sensing, Automotive and Industrial Analog Conditioning TLV2460AQDRG4 Automotive-grade same-family alternative Utilisé dans : Low-Voltage Sensor Signal Conditioning, Portable Measurement and Test Equipment, Battery-Powered IoT and Edge Sensing, Automotive and Industrial Analog Conditioning
What is the operating voltage of TLV2460ID?
The TLV2460ID operates from a 6 V nominal supply configuration and is designed for low-voltage analog systems. The device is also described as supporting dual-supply operation from ±1.35 V to ±3 V. According to the Texas Instruments TLV2460 product documentation, the amplifier is a single rail-to-rail input/output operational amplifier with a 6.4 MHz gain-bandwidth product and a shutdown function. Confirm the exact supply limits and input/output headroom in the manufacturer datasheet before finalizing the power rails.
What is the gain-bandwidth product of TLV2460ID?
The TLV2460ID has a 6.4 MHz gain-bandwidth product, as specified on the Texas Instruments product page. This bandwidth allows the amplifier to provide useful closed-loop performance in applications such as active filtering, sensor buffering, and low-frequency signal conditioning. The actual operating bandwidth depends on the gain configuration, feedback network, load, output amplitude, and supply voltage. For precision filter designs, evaluate the closed-loop response and stability margin using the datasheet models rather than relying only on the gain-bandwidth value.
Does TLV2460ID have rail-to-rail input and output?
Yes. The TLV2460ID is identified by Texas Instruments as a rail-to-rail input and rail-to-rail output operational amplifier. Rail-to-rail input operation is useful when the signal can approach either supply rail, while rail-to-rail output capability provides improved output swing in low-voltage designs. The practical output range still depends on load current and output amplitude, so use the manufacturer datasheet limits when sizing headroom for distortion-sensitive or load-step applications.
What is the shutdown function on the TLV2460ID?
The TLV2460ID includes a shutdown function that allows the amplifier to be placed into a low-power state when it is not needed. This can reduce system power consumption in battery-powered instruments, sensor nodes, and intermittently sampled measurement circuits. The shutdown control should be driven to a defined logic level rather than left floating. Check the shutdown logic levels and timing requirements in the Texas Instruments datasheet, especially when the amplifier state changes during startup or calibration.
Where can I download the TLV2460ID datasheet PDF?
The official Texas Instruments product page for the TLV2460 provides the manufacturer datasheet and ordering information at https://www.ti.com/product/TLV2460. The TLV2460ID ordering page is available at https://www.ti.com/product/TLV2460/part-details/TLV2460ID and identifies the device as an 8-pin SOIC part rated for -40°C to +125°C. Use the manufacturer document for the authoritative pinout, electrical characteristics, recommended operating conditions, and application guidance.
Where can I find the TLV2460ID pinout?
The TLV2460ID pinout is documented in the Texas Instruments TLV2460 datasheet, which covers the 8-pin SOIC (D) package. Use the pin-description table in that document when assigning input, output, supply, shutdown, and no-connect functions to PCB tracks. The package is identified as SOIC with eight pins, so a standard soic-8 footprint and pin-1 orientation convention apply. Confirm the exact orientation against the manufacturer land pattern and the physical package marking on incoming material.
What can replace the TLV2460ID?
The closest drop-in candidates identified for the TLV2460ID are the Texas Instruments TLV2460CDR and TLV2460AQDRG4, both associated with the same family and SOIC-8 device class. TLV2460CDR is a packaging/orderable variant with the same general performance profile, while TLV2460AQDRG4 is the automotive-grade variant. Because suffix codes can affect temperature grade, qualification, or shipping format, verify the full ordering details and pin-level functions before treating either part as a substitute.
Is the TLV2460CDR a drop-in replacement for TLV2460ID?
TLV2460CDR is a strong same-family replacement candidate for TLV2460ID because it uses the same SOIC-8 device family and is reported to have an equivalent performance profile in cross-reference data. The comparison indicates identical primary technical parameters for most designs. Pin compatibility still depends on the specific shutdown-control implementation and the exact ordering option, so confirm the datasheet pin descriptions, temperature grade, and required production qualifications before substitution.
When should I choose TLV2460ID instead of TLV2460CDR?
Choose the TLV2460ID when your design requires the specific original ordering configuration and you want to avoid changing supplier qualification or part-number documentation. Choose TLV2460CDR when sourcing continuity is more important and the design has been checked against the family datasheet and cross-reference data. Both are associated with the same SOIC-8 amplifier family, so the practical decision usually depends on lifecycle continuity, temperature grade, automotive qualification requirements, and approved BOM policy.
Is TLV2460ID suitable for low-voltage sensor interfaces?
Yes. The TLV2460ID is well suited to low-voltage sensor interfaces because it combines rail-to-rail input and output operation with a 6.4 MHz gain-bandwidth product and a shutdown function. A rail-to-rail input stage helps accept sensor signals near the supply rails, while shutdown can reduce consumption during inactive measurement intervals. Place input and supply bypass capacitors close to the device and verify source impedance, noise, bias current, and settling time against the sensor bandwidth.
How much power does the TLV2460ID dissipate?
The maximum power dissipation listed for the TLV2460ID is 710 mW under the specified test conditions. Actual dissipation depends on the supply voltage, output voltage, load current, and operating state, and it is normally lower than the maximum rating in normal use. For a simple estimate, use P = VIN × IQUIESCENT + (VIN - VOUT) × ILOAD, then check the result against the package thermal limits. The manufacturer datasheet should control the final thermal design.
What is the best Texas Instruments equivalent for TLV2460ID?
The best Texas Instruments equivalent depends on the required qualification and supply strategy. TLV2460CDR is the closest non-automotive same-family choice identified, and TLV2460AQDRG4 is the automotive-qualified alternative in the same SOIC-8 family. Both should be compared against the original datasheet for shutdown logic, temperature range, and production qualification. If the replacement must preserve the exact original MPN for traceability, retain TLV2460ID and qualify TLV2460CDR as a second source.
Can TLV2460ID be used in active filters and audio circuits?
Yes. The TLV2460ID can be used in active filters and small-signal audio circuits because it is a general-purpose rail-to-rail amplifier with 6.4 MHz gain-bandwidth product. In filters, select resistor and capacitor values with attention to noise, gain error, and closed-loop stability. In audio designs, verify output swing into the actual load and keep the signal path short to reduce parasitic pickup. Its shutdown feature can also help reduce power use when an audio section is inactive.
What are the key specifications of TLV2460ID?
The key TLV2460ID specifications are single-amplifier configuration, 6 V supply operation, 6.4 MHz gain-bandwidth product, rail-to-rail input and output, shutdown support, an 8-pin SOIC package, and a -40°C to +125°C operating-temperature range. The amplifier is intended for general-purpose low-voltage analog applications. Its 710 mW maximum power-dissipation figure and ±1.35 V to ±3 V dual-supply range are also listed in the product comparison references.
Where to buy TLV2460ID and what is its lead time?
Use the Request a Quote form on this page to request the current TLV2460ID price, stock position, and lead time. The product is listed by Texas Instruments as TLV2460ID, an 8-pin SOIC amplifier with a -40°C to +125°C temperature range. Lead time depends on the manufacturer’s current inventory and your order quantity, so confirm the required quantity, date code, and packaging details when submitting the request.
Is TLV2460ID in stock?
Inventory for TLV2460ID changes with regional demand and supplier activity, so the current availability should be confirmed through the Request a Quote form on this page. Provide the required quantity, target date, and acceptable date-code policy when requesting supply. The Texas Instruments product page remains the authoritative source for lifecycle and ordering information, while the quotation request provides the current commercial answer for your specific order.

Données de référence d'ingénierie pour TLV2460ID — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the TLV2460ID when your low-voltage analog design needs a single rail-to-rail amplifier with 6.4 MHz bandwidth, shutdown control, and an 8-pin SOIC footprint. Choose TLV2460CDR when it provides a more practical sourcing path and your quality review confirms that the family pinout, shutdown behavior, and qualification requirements remain acceptable. Choose TLV2460AQDRG4 for applications that require the automotive-oriented version of the family. All three candidates use the SOIC-8 footprint, so the mechanical change is minimal, but the final substitution should be based on the complete ordering information and manufacturer documentation. TLV2460ID remains the safest choice when the BOM must retain the exact original MPN and approved qualification status.

Comparaison avec les alternatives

Paramètre Ce produit TLV2460CDR TLV2460AQDRG4
Package SOIC-8 SOIC-8 - same SOIC-8 - same
Brand Texas Instruments Texas Instruments Texas Instruments
Number of Amplifiers 1 1 1
Supply Voltage 6 V 6 V family rating 6 V family rating
Gain-Bandwidth Product 6.4 MHz Equivalent primary performance rating Equivalent primary performance rating
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail
Shutdown Function Yes Yes Yes

Principaux différenciateurs

  • Same-family drop-in sourcing path (vs TLV2460CDR)
  • Automotive-grade family option (vs TLV2460AQDRG4)
  • Rail-to-rail signal range (vs TLV2460CDR)

Notes de conception

The TLV2460ID includes a shutdown control, so use it as an explicit power-management feature rather than leaving the control pin undefined. Assert shutdown during inactive periods in battery-powered systems, but account for startup and settling time before the first valid measurement. For a simple dissipation estimate, use P = VIN × IQUIESCENT + (VIN - VOUT) × ILOAD. The listed maximum power dissipation is 710 mW; actual operating dissipation depends on the supply, load, and output state.

Place the supply bypass capacitor as close as practical to the V+ and V- pins, and route input and feedback traces away from switching nodes and high-current paths. Keep the amplifier’s feedback network compact because parasitic capacitance can change the closed-loop response, particularly in gain configurations that approach the device’s 6.4 MHz gain-bandwidth product. Check the manufacturer land pattern for the SOIC-8 (D) package and confirm pin-1 orientation against the physical device marking.

Rail-to-rail input and output does not remove all design constraints. Verify that input signals, output swing, and shutdown-control levels remain valid during supply ramp-up and shutdown transitions. Do not drive the output into a heavy capacitive load unless the load and stability conditions are covered by the datasheet. For sensor interfaces, also account for source impedance, bias-current error, noise, and settling time rather than relying on bandwidth alone.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The TLV2460 family is available from Texas Instruments, but the verified references for this record do not state the specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status of the TLV2460ID ordering option. Check the current manufacturer product and compliance documentation before release.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

TLV2460ID datasheet TLV2460ID pinout TLV2460ID datasheet pdf TLV2460ID equivalent TLV2460ID replacement TLV2460ID vs TLV2460CDR TLV2460ID shutdown amplifier TLV2460ID 6.4 MHz TLV2460ID SOIC-8 TLV2460ID sensor interface TLV2460ID price TLV2460ID stock Texas Instruments TLV2460ID TLV2460ID application circuit

Composants & termes associés

Texas Instruments TLV2460ID TLV2460CDR TLV2460AQDRG4 TLV2460 operational amplifier rail-to-rail input/output amplifier general-purpose amplifier low-power analog IC integrated circuit analog amplifier gain-bandwidth product shutdown control SOIC-8 surface mount sensor signal conditioning active filter audio buffering battery-powered IoT 6.4 MHz 710 mW RoHS REACH
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ