TLV8544DT - Quad 3.6V 8kHz RRIO 500nA Op Amp | TI
Référence : TLV8544DT ✓ ActifTLV8544DT Présentation
An operational amplifier is a voltage-controlled differential amplifier used to amplify voltage differences, buffer analog signals, and implement feedback-based analog functions. The TLV8544 belongs to the RRIO operational-amplifier family within the broader amplifier IC and analog signal-processing hierarchy. RRIO describes amplifiers whose input and output voltage ranges can extend toward the positive and negative supply rails rather than remaining far from them.
The quad configuration provides four amplifiers in one package, making the TLV8544 useful when a design requires multiple low-frequency analog channels without allocating a separate package for each stage. Its 8 kHz bandwidth is appropriate for low-speed signal conditioning, sensor interfaces, and buffering rather than high-frequency precision work. The 500 nA typical quiescent current per channel also helps reduce the standing current required by continuously powered battery-operated systems.
Texas Instruments describes the TLV8544 as a nanopower RRIO amplifier intended for cost-optimized systems. The 3.6 V maximum supply rating supports low-voltage analog rails, while the rail-to-rail architecture improves usable signal range in compact, low-energy equipment. Its four-channel integration reduces component count and simplifies PCB routing when several amplifier functions are required.
Typical uses include low-power sensor conditioning, battery-powered instrumentation, portable measurement systems, current-loop signal conditioning, and general-purpose analog buffering. The device is also appropriate for threshold detection, low-frequency filtering, and amplifier stages in which low quiescent current is more important than high bandwidth.
When designing around the TLV8544, check input and output common-mode limits at the selected supply voltage and ensure the signal source can drive the amplifier input capacitance. Avoid relying on rail-to-rail behavior to permit inputs exactly at a supply rail unless the manufacturer specifications explicitly support that condition. Decoupling capacitors should be placed close to the supply pins to minimize supply disturbance and maintain predictable low-power operation.
This page combines the manufacturer's device characteristics with practical package, application, sourcing, and replacement guidance. It also distinguishes true same-footprint options from single-channel and dual-channel family members that cannot replace the four-channel TLV8544DT without changing the PCB footprint.
Alternatives de remplacement direct pour TLV8544DT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
TLV8544IDR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
TLV8544QDR
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
TLV8544DT Valeurs maximales et caractéristiques électriques
| Number of Channels | 4 |
| Maximum Supply Voltage | 3.6 V |
| Gain-Bandwidth Product | 8 kHz |
| Quiescent Current per Channel | 500 nA typical |
| Input Common-Mode Range | Rail-to-rail input |
| Output Swing | Rail-to-rail output |
| Amplifier Type | Operational amplifier |
| Number of Circuits | 4 circuits |
| Device Category | General-purpose amplifier |
| Boîtier | 14-pin SOIC |
| Type de montage | Surface mount |
| Power Class | Nanopower |
Guide de configuration des broches du TLV8544DT 14-pin soic
Configuration des broches du TLV8544DT (boîtier 14-pin soic). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour TLV8544DT.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
TLV8544DT convient pour 6 applications: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Current-Loop Signal Conditioning, Low-Power Threshold Detection, Portable Data-Acquisition Front End, Low-Power Audio and Control Buffering.
Battery-Powered Sensor Conditioning
The TLV8544DT fits low-speed sensor front ends where every microamp of standing current matters. Its 500 nA typical quiescent current per channel limits amplifier overhead to approximately 2.0 µA across four channels, while the 8 kHz bandwidth is more than adequate for many temperature, pressure, and position sensors. The four RRIO channels can buffer multiple sensor outputs or form gain stages without requiring separate amplifier packages. Before finalizing the interface, verify input bias current, offset voltage, common-mode limits, and output-current capability for the selected sensor.
Recommandé
Portable Medical Monitoring
The TLV8544DT is suitable for low-frequency monitoring blocks that combine several amplified physiological or diagnostic signals in a compact instrument. Four rail-to-rail amplifiers can condition buffered sensor outputs while the 500 nA typical quiescent current per channel limits power demand between measurement events. Its 8 kHz bandwidth supports slow envelope and sensor signals but is not intended for wideband ECG or ultrasound acquisition. Confirm the input noise, offset behavior, output swing, and application-specific safety requirements before selecting it for a medical design.
Recommandé
Industrial Current-Loop Signal Conditioning
The TLV8544DT can buffer and condition low-bandwidth current-loop signals in industrial instrumentation when the loop bandwidth remains below the amplifier's 8 kHz capability. Its four independent RRIO channels support multiple transmitter inputs, active filters, or threshold stages on the same board. The 3.6 V maximum supply rating is appropriate for compact low-voltage systems, and 500 nA typical quiescent current per channel is useful when the instrument depends on limited-energy operation. Validate loop impedance, output-current requirements, transient protection, and grounding with the complete signal-chain design.
Recommandé
Low-Power Threshold Detection
The TLV8544DT can implement four low-speed comparator-like threshold functions using feedback around its low-noise amplifier cores. Its 8 kHz bandwidth provides useful response margin for slow voltage thresholds, while the 500 nA typical quiescent current per channel makes the part suitable for continuous monitoring. Rail-to-rail input and output operation can improve signal coverage in low-voltage systems. Because open-loop behavior depends on offset, noise, input bias current, and common-mode limits, those characteristics should be checked against the smallest threshold margin in the design.
Recommandé
Portable Data-Acquisition Front End
The TLV8544DT fits portable, low-rate data-acquisition systems requiring several buffered analog inputs on a 3.6 V-class rail. Each channel combines an 8 kHz gain-bandwidth product with 500 nA typical quiescent current, allowing amplification without a high static power burden. The quad SOIC package reduces the number of amplifier packages needed for a multi-channel board and keeps routing manageable. Verify input capacitance, settling behavior, source impedance, and output drive against the selected sensor and sampling architecture.
Recommandé
Low-Power Audio and Control Buffering
The TLV8544DT can provide low-level audio or control-signal buffering when the required bandwidth is modest and power consumption must remain low. Four RRIO channels can handle several low-frequency control, detection, or auxiliary audio paths, while the 500 nA typical quiescent current per channel suits energy-limited systems. The 8 kHz bandwidth is appropriate for low-rate control signals and sub-audio-bandwidth conditioning rather than high-fidelity audio amplification. Confirm output-current capability, distortion, noise, and load stability before applying it to an audio path.
Recommandé
Données de référence d'ingénierie pour TLV8544DT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TLV8544IDR | TLV8544QDR |
|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Number of Channels | 4 | 4 | 4 |
| Maximum Supply Voltage | 3.6 V | 3.6 V | 3.6 V |
| Gain-Bandwidth Product | 8 kHz | 8 kHz | 8 kHz |
| Quiescent Current per Channel | 500 nA typical | 500 nA typical | 500 nA typical |
| Input Common-Mode Range | Rail-to-rail input | Rail-to-rail input | Rail-to-rail input |
| Output Swing | Rail-to-rail output | Rail-to-rail output | Rail-to-rail output |
Principaux différenciateurs
- Four low-power amplifier channels in one package (vs TLV8544IDR)
- Same core low-power RRIO performance (vs TLV8544QDR)
- Rail-to-rail signal-headroom strategy (vs TLV8544IDR)
Notes de conception
Estimate the amplifier's standing-power contribution using the typical quiescent current of 500 nA per channel. Four active channels therefore represent approximately 2.0 µA of typical quiescent current before load current, bias current, leakage, and switching losses are included. This calculation is an estimate based on the published typical value, not a worst-case specification. For battery-life decisions, use the manufacturer's maximum values over the intended temperature range and include the complete analog signal chain.
Place the device's supply bypass capacitor close to the positive and ground pins, and route the connection with minimal loop area. Because the TLV8544DT is designed for nanopower operation, excessive leakage through long copper tracks, contaminated boards, or unsuitable adjacent materials can become significant relative to the amplifier's current draw. Keep sensitive input traces away from switching nodes and maintain a quiet ground reference beneath the analog section.
Treat the 8 kHz gain-bandwidth product as the principal bandwidth constraint when selecting feedback resistors and compensation values. Higher closed-loop gain reduces bandwidth, while capacitive loading can add phase shift and reduce stability. Check the source impedance and the manufacturer's recommended feedback and output-capacitance limits. The rail-to-rail input and output labels do not remove the need to verify common-mode and output-swing limits at the actual 3.6 V-class supply voltage.
Do not substitute a single-channel or dual-channel TLV854x member as a direct replacement for the four-channel TLV8544DT; those variants use different packages and cannot retain all four channels without PCB changes. Also do not assume that all same-family suffix variants are interchangeable across temperature grades or shipment forms. Compare the exact ordering table, pin description, electrical limits, and package drawing before approving a substitution.
Informations de conformité
Compliance attributes require confirmation from the manufacturer product page or the exact ordering documentation.