Texas Instruments

TLV8544DT - Quad 3.6V 8kHz RRIO 500nA Op Amp | TI

部品番号: TLV8544DT ✓ 生産中
3.6 V Vdss 500 nA typical Id 14-pin SOIC Package
MOQ: 1 |

TLV8544DT 概要

The Texas Instruments TLV8544DT is a quad, rail-to-rail input and output operational amplifier with a 3.6 V supply rating, 8 kHz gain-bandwidth product, and 500 nA typical quiescent current per channel, housed in a 14-pin SOIC package. Its four independent amplifier channels combine low power consumption with input and output operation close to the supply rails.

An operational amplifier is a voltage-controlled differential amplifier used to amplify voltage differences, buffer analog signals, and implement feedback-based analog functions. The TLV8544 belongs to the RRIO operational-amplifier family within the broader amplifier IC and analog signal-processing hierarchy. RRIO describes amplifiers whose input and output voltage ranges can extend toward the positive and negative supply rails rather than remaining far from them.

The quad configuration provides four amplifiers in one package, making the TLV8544 useful when a design requires multiple low-frequency analog channels without allocating a separate package for each stage. Its 8 kHz bandwidth is appropriate for low-speed signal conditioning, sensor interfaces, and buffering rather than high-frequency precision work. The 500 nA typical quiescent current per channel also helps reduce the standing current required by continuously powered battery-operated systems.

Texas Instruments describes the TLV8544 as a nanopower RRIO amplifier intended for cost-optimized systems. The 3.6 V maximum supply rating supports low-voltage analog rails, while the rail-to-rail architecture improves usable signal range in compact, low-energy equipment. Its four-channel integration reduces component count and simplifies PCB routing when several amplifier functions are required.

Typical uses include low-power sensor conditioning, battery-powered instrumentation, portable measurement systems, current-loop signal conditioning, and general-purpose analog buffering. The device is also appropriate for threshold detection, low-frequency filtering, and amplifier stages in which low quiescent current is more important than high bandwidth.

When designing around the TLV8544, check input and output common-mode limits at the selected supply voltage and ensure the signal source can drive the amplifier input capacitance. Avoid relying on rail-to-rail behavior to permit inputs exactly at a supply rail unless the manufacturer specifications explicitly support that condition. Decoupling capacitors should be placed close to the supply pins to minimize supply disturbance and maintain predictable low-power operation.

This page combines the manufacturer's device characteristics with practical package, application, sourcing, and replacement guidance. It also distinguishes true same-footprint options from single-channel and dual-channel family members that cannot replace the four-channel TLV8544DT without changing the PCB footprint.

ドロップイン代替品: TLV8544DT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

TLV8544IDR

✅ ドロップイン ⚠️ 仕様未検証
📦 14-pin SOIC
Same four-channel 3.6 V RRIO architecture and 8 kHz bandwidth; ordering suffix may change temperature grade, marking, or shipment form

📋 参考代替品(カタログ未掲載)

TLV8544QDR

✅ ドロップイン ⚠️ 仕様未検証
📦 14-pin SOIC
Same four-channel 3.6 V RRIO architecture and 8 kHz bandwidth; ordering suffix may change qualification grade, marking, or tape-and-reel form

📋 参考代替品(カタログ未掲載)

TLV8544DT 最大定格&電気的特性

Number of Channels 4
Maximum Supply Voltage 3.6 V
Gain-Bandwidth Product 8 kHz
Quiescent Current per Channel 500 nA typical
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Amplifier Type Operational amplifier
Number of Circuits 4 circuits
Device Category General-purpose amplifier
パッケージ 14-pin SOIC
実装タイプ Surface mount
Power Class Nanopower

TLV8544DT 14-pin soic ピン配置ガイド

TLV8544DT (14-pin soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

TLV8544DT の 14-pin soic パッケージピン配置図

詳細なピン配置データはありません: TLV8544DT.

詳細は データシート をご参照ください。

主な用途

TLV8544DT の用途: 6 件s: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Current-Loop Signal Conditioning, Low-Power Threshold Detection, Portable Data-Acquisition Front End, Low-Power Audio and Control Buffering.

🧩

Battery-Powered Sensor Conditioning

The TLV8544DT fits low-speed sensor front ends where every microamp of standing current matters. Its 500 nA typical quiescent current per channel limits amplifier overhead to approximately 2.0 µA across four channels, while the 8 kHz bandwidth is more than adequate for many temperature, pressure, and position sensors. The four RRIO channels can buffer multiple sensor outputs or form gain stages without requiring separate amplifier packages. Before finalizing the interface, verify input bias current, offset voltage, common-mode limits, and output-current capability for the selected sensor.

💊

Portable Medical Monitoring

The TLV8544DT is suitable for low-frequency monitoring blocks that combine several amplified physiological or diagnostic signals in a compact instrument. Four rail-to-rail amplifiers can condition buffered sensor outputs while the 500 nA typical quiescent current per channel limits power demand between measurement events. Its 8 kHz bandwidth supports slow envelope and sensor signals but is not intended for wideband ECG or ultrasound acquisition. Confirm the input noise, offset behavior, output swing, and application-specific safety requirements before selecting it for a medical design.

🏭

Industrial Current-Loop Signal Conditioning

The TLV8544DT can buffer and condition low-bandwidth current-loop signals in industrial instrumentation when the loop bandwidth remains below the amplifier's 8 kHz capability. Its four independent RRIO channels support multiple transmitter inputs, active filters, or threshold stages on the same board. The 3.6 V maximum supply rating is appropriate for compact low-voltage systems, and 500 nA typical quiescent current per channel is useful when the instrument depends on limited-energy operation. Validate loop impedance, output-current requirements, transient protection, and grounding with the complete signal-chain design.

🔧

Low-Power Threshold Detection

The TLV8544DT can implement four low-speed comparator-like threshold functions using feedback around its low-noise amplifier cores. Its 8 kHz bandwidth provides useful response margin for slow voltage thresholds, while the 500 nA typical quiescent current per channel makes the part suitable for continuous monitoring. Rail-to-rail input and output operation can improve signal coverage in low-voltage systems. Because open-loop behavior depends on offset, noise, input bias current, and common-mode limits, those characteristics should be checked against the smallest threshold margin in the design.

📱

Portable Data-Acquisition Front End

The TLV8544DT fits portable, low-rate data-acquisition systems requiring several buffered analog inputs on a 3.6 V-class rail. Each channel combines an 8 kHz gain-bandwidth product with 500 nA typical quiescent current, allowing amplification without a high static power burden. The quad SOIC package reduces the number of amplifier packages needed for a multi-channel board and keeps routing manageable. Verify input capacitance, settling behavior, source impedance, and output drive against the selected sensor and sampling architecture.

🎧

Low-Power Audio and Control Buffering

The TLV8544DT can provide low-level audio or control-signal buffering when the required bandwidth is modest and power consumption must remain low. Four RRIO channels can handle several low-frequency control, detection, or auxiliary audio paths, while the 500 nA typical quiescent current per channel suits energy-limited systems. The 8 kHz bandwidth is appropriate for low-rate control signals and sub-audio-bandwidth conditioning rather than high-fidelity audio amplification. Confirm output-current capability, distortion, noise, and load stability before applying it to an audio path.

What is the TLV8544DT?
The TLV8544DT is a Texas Instruments quad operational amplifier designed for low-voltage, low-power analog signal processing. According to the TLV8544 product page, it provides four channels, operates from a supply rated up to 3.6 V, offers an 8 kHz gain-bandwidth product, and consumes 500 nA typical quiescent current per channel. Its rail-to-rail input and rail-to-rail output architecture is intended to maximize signal range in compact, cost-sensitive systems.
What is the TLV8544DT pinout?
The TLV8544DT uses a 14-pin SOIC footprint containing four operational amplifiers and their supply connections. Use the pin-description table and package drawing in the manufacturer datasheet when assigning individual amplifier inputs, outputs, and supply pins. The product page identifies the device as a 14-pin SOIC quad amplifier, but the exact numbered pin names must be taken from the manufacturer drawing before PCB routing or schematic capture.
Where can I download the TLV8544DT datasheet PDF?
The official TLV8544 datasheet is available from Texas Instruments through the product page and the TLV854x technical documentation link. The product page provides ordering information, quality information, and links to the manufacturer documentation. Engineers should use the TI-hosted datasheet for the authoritative pinout, electrical characteristics, application guidance, and package drawings for the exact TLV8544DT ordering code.
What are the key specifications of TLV8544DT that engineers should know?
The key TLV8544DT specifications are four amplifier channels, a 3.6 V maximum supply rating, an 8 kHz gain-bandwidth product, and 500 nA typical quiescent current per channel. Texas Instruments classifies it as a nanopower, rail-to-rail input and output amplifier for cost-optimized systems. These figures position the device for low-frequency buffering, sensor conditioning, thresholding, and portable analog systems rather than high-speed signal processing.
What can replace the TLV8544DT?
A valid replacement for the TLV8544DT must provide four amplifiers in the same 14-pin SOIC footprint and remain compatible with the required supply voltage and signal range. The TLV8544IDR is the closest same-family SOIC option identified, while other single- and dual-channel TLV854x versions are not drop-in replacements because their packages and channel counts differ. Verify the exact pinout and temperature grade against the manufacturer datasheet before substituting any part.
Is the TLV8544DT the same as the TLV8544IDR?
The TLV8544DT and TLV8544IDR belong to the same TLV8544 four-channel family and use the same 14-pin SOIC class of package, but their ordering codes can specify different commercial, packaging, or temperature options. According to the manufacturer product documentation, both provide 3.6 V, 8 kHz, 500 nA-per-channel RRIO operation. Confirm the specific suffix, grade, tape-and-reel status, and temperature range before using one as a drop-in replacement.
TLV8544DT versus TLV8544IDR: which is better for a low-power design?
Both devices target the same low-power amplifier role, so the better choice depends on the required ordering grade and temperature range rather than on bandwidth or quiescent current. The TLV8544DT is listed as a standard general-purpose 14-SOIC quad amplifier, while the TLV8544IDR is an ordering variant in the same family. Review the suffix-specific temperature rating, marking, and shipment form in the manufacturer ordering information before deciding.
When should I choose the TLV8544DT over a single-channel amplifier?
Choose the TLV8544DT when the design needs four low-frequency analog functions and can use a common 14-pin SOIC footprint. Four integrated channels can reduce board area and simplify routing compared with separate single-channel packages. Select a single-channel amplifier instead when only one stage is required, when the channel count would otherwise remain unused, or when a smaller package offers a better mechanical fit.
Is the TLV8544DT suitable for battery-powered sensor conditioning?
The TLV8544DT is suitable for many battery-powered sensor-conditioning applications because each channel consumes 500 nA typical quiescent current. Its 8 kHz bandwidth is adequate for slow sensor signals, while the rail-to-rail input and output stages can improve signal utilization at low supply voltages. Confirm input bias current, output-current capability, noise, and common-mode limits before selecting it for a specific sensor or electrode interface.
What are the thermal and power considerations for the TLV8544DT?
The primary power concern for the TLV8544DT is total channel quiescent current rather than package heating. At the 500 nA typical quiescent-current value per channel, four channels draw 2.0 µA typical quiescent current under the stated conditions. Actual system consumption also includes load current, bias current, leakage, and switching activity. Use the manufacturer supply-current limits when calculating battery life.
Where can I buy the TLV8544DT online?
Use the Request a Quote form on this page to request current availability, minimum order quantity, lead time, and a delivered quotation for TLV8544DT. The manufacturer lists the TLV8544DT in a 14-pin SOIC package, and current channel inventory can change quickly. Quote requests allow the exact suffix, quantity, and shipment requirements to be checked before an order is placed.
What is the price of the TLV8544DT?
The TLV8544DT quotation depends on quantity, package form, current inventory, and market conditions. Submit a Request a Quote on this page with the required quantity and delivery location to obtain the current price and availability. The structured pricing area and quoting workflow are intended to prevent stale price information from being shown as an unconditional current commitment.
What is the lead time for the TLV8544DT?
The current lead time for TLV8544DT should be confirmed through the Request a Quote form on this page. Lead time can vary with the selected package form, order quantity, production schedule, and destination. Texas Instruments identifies TLV8544DT as a 4-circuit, rail-to-rail, 14-SOIC amplifier, but those product characteristics do not establish a guaranteed inventory date for every order.
Is the TLV8544DT currently in stock?
Current TLV8544DT stock should be checked through the Request a Quote form on this page because channel inventory and package-form availability can change rapidly. The quantity-break offer form asks distributors to confirm the exact manufacturer part number and required order quantity. No stock conclusion should be based only on an index page or a general distributor search result.
What is the best cross-brand equivalent for the TLV8544DT?
No cross-brand drop-in equivalent can be confirmed from the available component records because the cross-reference results provide only search tools rather than a pin-compatible part with verified electrical characteristics. A suitable competitor must combine four channels, a 14-pin SOIC footprint, operation within a 3.6 V supply, rail-to-rail input and output behavior, and comparable low-power characteristics. Do not treat a merely similar low-power amplifier as a drop-in replacement without checking its pinout.

エンジニアリング参考データ: TLV8544DT — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TLV8544DT when a design requires four low-frequency, low-power amplifier channels, a maximum 3.6 V supply, rail-to-rail input and output behavior, and a 14-pin SOIC footprint. Its 500 nA typical quiescent current per channel and 8 kHz bandwidth make it most appropriate for sensor buffering, portable instrumentation, threshold detection, and low-rate acquisition rather than high-speed or high-current work. Consider the TLV8544IDR when its specific temperature and ordering attributes match the design more closely, and consider the TLV8544QDR when its qualification, marking, or tape-and-reel configuration is required. These are same-family choices rather than broad performance upgrades, so verify suffix-specific electrical limits and availability. A single- or dual-channel amplifier is preferable when fewer channels are needed or a smaller package is essential. Do not select a different package or channel count as a drop-in replacement without redesigning the PCB.

代替品との比較

パラメータ この製品 TLV8544IDR TLV8544QDR
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Number of Channels 4 4 4
Maximum Supply Voltage 3.6 V 3.6 V 3.6 V
Gain-Bandwidth Product 8 kHz 8 kHz 8 kHz
Quiescent Current per Channel 500 nA typical 500 nA typical 500 nA typical
Input Common-Mode Range Rail-to-rail input Rail-to-rail input Rail-to-rail input
Output Swing Rail-to-rail output Rail-to-rail output Rail-to-rail output

主な差別化要因

  • Four low-power amplifier channels in one package (vs TLV8544IDR)
  • Same core low-power RRIO performance (vs TLV8544QDR)
  • Rail-to-rail signal-headroom strategy (vs TLV8544IDR)

設計ノート

Estimate the amplifier's standing-power contribution using the typical quiescent current of 500 nA per channel. Four active channels therefore represent approximately 2.0 µA of typical quiescent current before load current, bias current, leakage, and switching losses are included. This calculation is an estimate based on the published typical value, not a worst-case specification. For battery-life decisions, use the manufacturer's maximum values over the intended temperature range and include the complete analog signal chain.

Place the device's supply bypass capacitor close to the positive and ground pins, and route the connection with minimal loop area. Because the TLV8544DT is designed for nanopower operation, excessive leakage through long copper tracks, contaminated boards, or unsuitable adjacent materials can become significant relative to the amplifier's current draw. Keep sensitive input traces away from switching nodes and maintain a quiet ground reference beneath the analog section.

Treat the 8 kHz gain-bandwidth product as the principal bandwidth constraint when selecting feedback resistors and compensation values. Higher closed-loop gain reduces bandwidth, while capacitive loading can add phase shift and reduce stability. Check the source impedance and the manufacturer's recommended feedback and output-capacitance limits. The rail-to-rail input and output labels do not remove the need to verify common-mode and output-swing limits at the actual 3.6 V-class supply voltage.

Do not substitute a single-channel or dual-channel TLV854x member as a direct replacement for the four-channel TLV8544DT; those variants use different packages and cannot retain all four channels without PCB changes. Also do not assume that all same-family suffix variants are interchangeable across temperature grades or shipment forms. Compare the exact ordering table, pin description, electrical limits, and package drawing before approving a substitution.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance attributes require confirmation from the manufacturer product page or the exact ordering documentation.

関連検索

TLV8544DT datasheet TLV8544DT pinout TLV8544DT datasheet pdf TLV8544DT equivalent TLV8544DT replacement TLV8544DT price TLV8544DT stock Texas Instruments TLV8544DT TLV8544 3.6V quad op amp TLV8544 8kHz 500nA amplifier TLV8544DT 14-SOIC pinout TLV8544DT sensor conditioning TLV8544DT vs TLV8544IDR TLV8544DT application circuit

関連部品&用語

Texas Instruments TLV8544DT TLV8544 TLV8544IDR TLV8544QDR operational amplifier quad amplifier rail-to-rail input and output amplifier RRIO nanopower amplifier analog IC signal conditioner buffer amplifier 3.6 V power supply 8 kHz gain-bandwidth product 500 nA quiescent current 14-pin SOIC SOIC package surface-mount package sensor conditioning battery-powered instrumentation industrial current loop low-power data acquisition
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示