TPS26600RHFR - 60V eFuse with Reverse Polarity Protection | TI
Référence : TPS26600RHFR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $1.02 | $1,02 |
| 10 | $0.95 | $9,50 |
| 100 | $0.88 | $88,00 |
| 500 | $0.82 | $410,00 |
| 1 000 | $0.76 | $760,00 |
TPS26600RHFR Présentation
An eFuse (electronic fuse) is a semiconductor-based circuit protection device that replaces traditional fuses and hot-swap controllers. It integrates power MOSFETs, current sensing, and control logic to provide overcurrent, overvoltage, and reverse polarity protection. In the power management hierarchy, an eFuse falls under power management ICs, specifically within the category of hot-swap controllers and circuit protection devices. The TPS26600RHFR enhances system reliability by eliminating the need for external protection components and enabling precise, resettable protection.
Key features include integrated reverse input polarity protection down to -60V without additional components, adjustable current limit via an external resistor, and a full suite of protection features such as overvoltage, undervoltage, and thermal shutdown. The device also supports programmable startup delay and fault timer, enabling controlled inrush current during hot-swap events. Its wide input range makes it suitable for 12V, 24V, and 48V industrial buses.
Technically, the TPS26600RHFR uses a linear regulation scheme to limit current, with an internal charge pump driving the high-side MOSFET. The integrated back-to-back FETs provide reverse current blocking, preventing current flow from output to input during reverse polarity conditions. The device features a fault output (FLT) and enable input (EN) for system-level control, and its accuracy is maintained through a precision current-sense amplifier.
Typical applications include programmable logic controllers (PLCs), motor drives, battery protection, and power distribution in industrial automation. Its ability to handle up to 60V makes it ideal for 48V telecom and server power architectures. The device is also used in automotive body control modules and infotainment systems where reverse battery protection is critical.
When designing with the TPS26600RHFR, ensure proper PCB layout with adequate copper area for thermal dissipation, as the device can dissipate significant power during current limiting. Place the current-limit resistor close to the ILIM pin and use Kelvin connections for accurate sensing. The device's thermal shutdown protects against overtemperature, but thermal design should be verified for worst-case conditions.
Alternatives de remplacement direct pour TPS26600RHFR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
TPS26600RHFT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TPS26602RHFR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TPS26602RHFT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TPS26600RHFR Valeurs maximales et caractéristiques électriques
| Plage de tension d'entrée | 4.2 V to 60 V |
| Absolute Maximum Input Voltage | 62 V |
| Reverse Polarity Protection | -60 V |
| Total On-Resistance (RON) | 150 mΩ |
| Adjustable Current Limit Range | 0.1 A to 2.23 A |
| Maximum Continuous Current | 2.35 A |
| Boîtier | VQFN (RHF) 24-pin, 5x4 mm |
| Plage de température de fonctionnement | -40°C to 125°C |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Thermal Shutdown, Reverse Polarity |
| Programmable Startup Delay | Yes |
| Fault Timer | Programmable |
| Enable Input | Yes |
| Fault Output | Yes |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de TPS26600RHFR
| Broche 1 | IN — Input supply voltage |
| Broche 2 | IN — Input supply voltage |
| Broche 3 | IN — Input supply voltage |
| Broche 4 | IN — Input supply voltage |
| Broche 5 | EN — Enable input (active high) |
| Broche 6 | ILIM — Current limit set resistor connection |
| Broche 7 | GND — Ground |
| Broche 8 | GND — Ground |
| Broche 9 | FLT — Fault output (open-drain, active low) |
| Broche 10 | PG — Power good output |
| Broche 11 | OUT — Regulated output voltage |
| Broche 12 | OUT — Regulated output voltage |
| Broche 13 | OUT — Regulated output voltage |
| Broche 14 | OUT — Regulated output voltage |
| Broche 15 | OUT — Regulated output voltage |
| Broche 16 | OUT — Regulated output voltage |
| Broche 17 | OUT — Regulated output voltage |
| Broche 18 | OUT — Regulated output voltage |
| Broche 19 | OUT — Regulated output voltage |
| Broche 20 | OUT — Regulated output voltage |
| Broche 21 | OUT — Regulated output voltage |
| Broche 22 | OUT — Regulated output voltage |
| Broche 23 | OUT — Regulated output voltage |
| Broche 24 | OUT — Regulated output voltage |
Applications typiques
TPS26600RHFR convient pour 6 applications: Industrial Automation, Automotive Electronics, Telecom and Server Power, Battery Protection, Motor Drives, Test and Measurement.
Industrial Automation
The TPS26600RHFR provides robust power path protection for PLCs, motor drives, and industrial sensors. Its 4.2V to 60V input range covers 24V industrial buses, and the adjustable current limit (0.1A to 2.23A) allows precise protection for various loads. The integrated reverse polarity protection eliminates the need for external diodes, simplifying design and improving reliability. The device's programmable startup delay and fault timer enable controlled inrush current during hot-swap events, preventing system glitches. With a 150mΩ on-resistance, it minimizes power loss, making it suitable for high-efficiency industrial power distribution.
Recommandé
Automotive Electronics
In automotive systems, the TPS26600RHFR protects ECUs, infotainment, and body control modules from reverse battery and overcurrent faults. Its -60V reverse polarity protection is critical for 12V and 24V vehicle electrical systems. The wide operating temperature range (-40°C to 125°C) meets automotive requirements. The device's thermal shutdown and overvoltage protection safeguard sensitive electronics during load dump and other transients. Its small VQFN-24 package saves board space in space-constrained automotive modules. The adjustable current limit allows tailoring protection to specific loads, from sensors to actuators.
Recommandé
Telecom and Server Power
The TPS26600RHFR is ideal for 48V telecom and server power distribution, providing hot-swap protection for line cards and server blades. Its 60V input rating handles 48V buses with margin, and the integrated back-to-back FETs block reverse current during fault conditions. The programmable current limit and fault timer enable controlled inrush during board insertion, preventing voltage droops. The device's low 150mΩ on-resistance minimizes power loss, improving system efficiency. Its compact package allows dense board layouts in high-availability systems. The fault output (FLT) can trigger system alerts for rapid diagnostics.
Recommandé
Battery Protection
The TPS26600RHFR protects battery-powered systems from overcurrent, overvoltage, and reverse polarity faults. Its wide input range supports various battery chemistries, from 2-cell Li-ion (7.4V) to 48V lead-acid. The adjustable current limit allows setting precise thresholds for charging and discharging. The device's low quiescent current and 150mΩ on-resistance minimize battery drain. The integrated reverse polarity protection prevents damage from incorrect battery connection. Its thermal shutdown protects the system during high-current faults. The enable pin allows system-level power gating for low-power standby modes.
Recommandé
Motor Drives
The TPS26600RHFR provides overcurrent and overvoltage protection for motor drive power stages. Its 60V rating covers 24V and 48V motor buses, and the adjustable current limit protects against stall and short-circuit conditions. The device's fast response time limits fault energy, protecting MOSFETs and motor windings. The integrated reverse polarity protection is useful in battery-powered tools and robotics. The programmable fault timer allows temporary overcurrent during motor startup without tripping. Its compact package fits in motor controllers with limited PCB space. The fault output can trigger a microcontroller for diagnostics.
Recommandé
Test and Measurement
The TPS26600RHFR protects test equipment power inputs from overcurrent and reverse polarity faults. Its wide input range (4.2V to 60V) accommodates various bench supplies and industrial test systems. The adjustable current limit allows precise protection for sensitive measurement circuits. The device's low noise and high accuracy ensure minimal impact on measurement integrity. The integrated reverse polarity protection prevents damage from miswired test leads. Its small package is ideal for portable instruments. The fault output can be used to log protection events for analysis.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TPS26600RHFR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TPS26600RHFT | TPS26602RHFR | TPS26602RHFT | TPS26600PWP |
|---|---|---|---|---|---|
| Package | VQFN (RHF) 24-pin | VQFN (RHF) 24-pin | VQFN (RHF) 24-pin | VQFN (RHF) 24-pin | HTSSOP-20 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Input Voltage Range | 4.2V to 60V | 4.2V to 60V | 4.2V to 60V | 4.2V to 60V | 4.2V to 60V |
| Current Limit Range | 0.1A to 2.23A | 0.1A to 2.23A | 2A fixed | 2A fixed | 0.1A to 2.23A |
| On-Resistance | 150mΩ | 150mΩ | 150mΩ | 150mΩ | 150mΩ |
| Reverse Polarity Protection | -60V | -60V | -60V | -60V | -60V |
| Operating Temperature | -40°C to 125°C | -40°C to 125°C | -40°C to 125°C | -40°C to 125°C | -40°C to 125°C |
| Enable Pin | Yes | Yes | Yes | Yes | Yes |
Principaux différenciateurs
- Integrated reverse polarity protection down to -60V (vs TPS26600PWP)
- Adjustable current limit from 0.1A to 2.23A (vs TPS26602RHFR)
- Compact VQFN-24 package (vs TPS26600PWP)
Notes de conception
During current limiting, the TPS26600RHFR can dissipate significant power. For example, at 24V input and 2A limit, power dissipation can reach 48W. The VQFN-24 package has a thermal resistance of approximately 30°C/W, so ensure adequate copper area and thermal vias to keep junction temperature below 125°C. Use the exposed pad for heat sinking.
Place the current-limit resistor (RILIM) close to the ILIM pin and use Kelvin connections to avoid parasitic resistance. Input and output capacitors should be placed as close as possible to the IN and OUT pins. Use a 0.1µF ceramic capacitor on the EN pin for noise filtering. Follow the layout guidelines in the TI datasheet (SLVSD08) for optimal performance.
Do not exceed the absolute maximum input voltage of 62V. Ensure the current-limit resistor is properly sized for the desired current; an incorrect value can cause nuisance trips or inadequate protection. The FLT pin is open-drain and requires a pull-up resistor. Verify the startup delay and fault timer settings to avoid unintended shutdowns during inrush.
Informations de conformité
RoHS compliant per TI product page. Not AEC-Q100 qualified; for automotive, verify with TI.
