TS391ILT - Low-Power Single Comparator | STMicroelectronics
Référence : TS391ILT ✓ ActifTS391ILT Présentation
A voltage comparator is an analog integrated circuit that compares two input voltages and produces a digital output indicating which input is higher. The TS391 belongs to the comparator hierarchy within analog and mixed-signal semiconductors. Its low-power design makes it useful where continuous monitoring is required, including industrial control, sensor interfaces, power-supply sequencing, battery monitoring, and portable equipment.
Key characteristics include very low supply-current consumption, low input bias current, low input-offset voltage, and an input common-mode range extending close to both supply rails. Operation from a single supply is supported, and split-supply operation is also possible. The open-collector output requires an external pull-up resistor and can be connected to a compatible logic supply when the open-drain node must rise above the comparator supply voltage.
The TS391/TS391A family uses an open-collector output architecture rather than a push-pull output. This allows the output to be pulled up to a selected logic voltage, supports wired-AND behavior with suitable arrangements, and provides a defined state when the output transistor is off. Input bias and offset characteristics determine the practical switching threshold accuracy, while propagation delay determines how quickly the circuit responds to an input crossing.
Typical uses include monitoring sensor outputs, detecting overvoltage or undervoltage conditions, comparing temperature-derived analog signals, and providing a simple control decision in battery-powered products. The SOT-23-5 format supports dense PCB layouts, although engineers should account for the package's limited thermal dissipation and the output pull-up component required by the open-collector architecture.
For reliable operation, use the pin-description table in the manufacturer datasheet when assigning PCB tracks because the comparator uses a specific five-terminal SOT-23 layout. Confirm input voltage, common-mode range, output pull-up voltage, and propagation-delay limits across the complete temperature range before committing the circuit to a safety- or timing-sensitive application.
This product overview consolidates the comparator's electrical limits, package details, replacement constraints, and practical design guidance into one engineering reference. It also distinguishes true pin-compatible alternatives from functionally similar devices with different pin assignments, helping prevent PCB rework and unintended board-level failures.
Alternatives de remplacement direct pour TS391ILT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
TS391IYLT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
TS391ILT Valeurs maximales et caractéristiques électriques
| Comparator Type | Single general-purpose voltage comparator |
| Supply Voltage Range | 2 V to 34 V |
| Maximum Supply Voltage | 36 V |
| Courant d'alimentation | 0.2 mA typical |
| Maximum Quiescent Current | 1.25 mA |
| Power Consumption | 1 mW per comparator at 5 V |
| Input Offset Voltage | ±1 mV typical |
| Maximum Input Offset Voltage | 5 mV at 5 V |
| Input Offset Current | ±5 nA typical |
| Input Bias Current | 25 nA typical |
| Maximum Input Bias Current | 0.25 µA at 5 V |
| Response Time | Approximately 1.3 µs |
| Alternate Response-Time Listing | Approximately 0.3 µs |
| Type de sortie | Open-collector |
| Common-Mode Input Range | Includes ground and extends close to the positive supply rail |
| Boîtier | SOT-23-5, 5 pins |
| Type de montage | SMD surface mount |
| Statut RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Configuration des broches de TS391ILT
| Broche 1 | OUT — Open-collector comparator output |
| Broche 2 | IN− — Inverting input |
| Broche 3 | IN+ — Noninverting input |
| Broche 4 | V− — Negative supply or ground connection |
| Broche 5 | V+ — Positive supply connection |
Applications typiques
TS391ILT convient pour 6 applications: Battery Voltage Monitoring, Industrial Sensor Threshold Detection, Power-Supply Sequencing, Portable Equipment, Temperature and Analog Signal Conditioning, Interface and Level Monitoring.
Battery Voltage Monitoring
The TS391ILT is appropriate for detecting when a battery-derived supply crosses a defined threshold. Its approximately 0.2 mA typical supply current limits continuous monitoring overhead, while 25 nA typical input-bias current reduces loading on high-impedance divider networks. Place the resistor divider at the noninverting input and reference the threshold at the inverting input. Because the output is open collector, add a pull-up resistor to the required logic level. This device is preferable where low standby consumption matters more than microsecond-scale switching speed.
Recommandé
Industrial Sensor Threshold Detection
The TS391ILT can translate an analog industrial-sensor signal into a binary decision for a controller input. Its ±1 mV typical input-offset voltage and 25 nA typical input-bias current are useful when preserving the accuracy of a high-impedance sensing node. Connect the sensor signal to one input and a precision reference to the other, then use the open-collector output with an appropriate pull-up. The SOT-23-5 package saves board area, although layout must keep the comparator and reference path away from switching-node noise.
Recommandé
Power-Supply Sequencing
The TS391ILT can supervise a generated rail and provide an open-collector signal when the monitored voltage changes state. With a resistor divider at the input and a reference at the other input, the comparator supports simple undervoltage or overvoltage indication without a complex controller. Its response time of approximately 1.3 µs is short enough for many sequencing and fault-response paths. The open-collector architecture permits a pull-up to the logic rail used by the supervisor, making the output adaptable to different system voltage domains.
Recommandé
Portable Equipment
The TS391ILT suits portable equipment that must continuously evaluate a slow-changing analog condition without consuming substantial current. Its approximately 1 mW power consumption at 5 V, 25 nA typical input-bias current, and compact SOT-23-5 package help preserve battery life and board area. It can monitor a sensor rail, charger state, or divided battery voltage and report the result through an open-collector logic signal. Select the pull-up supply carefully to avoid backfeeding an unpowered section or exceeding the output ratings.
Recommandé
Temperature and Analog Signal Conditioning
The TS391ILT can compare a temperature-dependent analog voltage against a stable threshold, producing a clean control signal for a fan, heater, or alarm. Its low input-bias current minimizes disturbance to high-impedance sensor and divider networks, while the open-collector output can directly pull down a suitably rated digital control line. The approximately 0.3 µs to 1.3 µs response specifications cover fast threshold events without requiring a high-speed comparator. Thermal placement and resistor accuracy will determine the practical switching accuracy.
Recommandé
Interface and Level Monitoring
The TS391ILT is useful for monitoring a logic or interface voltage and asserting an alert when the level becomes invalid. Connect the signal through a divider if it exceeds the common-mode range, compare it with a reference, and use the open-collector output to drive an enable, reset, or fault input through a pull-up. Low typical input-bias current of 25 nA limits disturbance to high-impedance digital buses. The SOT-23-5 footprint simplifies placement beside the monitored circuit, but signal traces should remain short and isolated from high-current switching paths.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour TS391ILT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TS391IYLT |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | SOT-23-5, 5 pins | SOT-23-5, 5 pins - same |
| Comparator Configuration | Single voltage comparator | Single voltage comparator |
| Supply Voltage Range | 2 V to 34 V | 2 V to 34 V |
| Supply Current | 0.2 mA typical | 0.2 mA typical |
| Input Offset Voltage | ±1 mV typical | ±1 mV typical |
| Input Bias Current | 25 nA typical | 25 nA typical |
| Output Type | Open collector | Open collector |
| Response Time | Approximately 1.3 µs | Approximately 1.3 µs |
Principaux différenciateurs
- Maintains the TS391-specific input arrangement (vs TLV331)
- Lower typical power consumption for continuous monitoring (vs TS391IYLT)
- Wide single-supply operating range (vs TS391IYLT)
Notes de conception
Do not treat TLV331 or another low-power comparator as a direct replacement merely because its specifications appear similar. The TS391ILT has a northwest SOT-23-5 pin arrangement with reversed inputs, so changing comparator families can place OUT, an input, or a supply pin on the wrong PCB node. TS391IYLT is the identified same-footprint family alternative; otherwise, redesign the footprint and revalidate the routing.
The open-collector output needs an external pull-up resistor. Choose its resistance from the output sink-current limit, required logic rise time, and available output capacitance, using the characteristic curves in the STMicroelectronics TS391/TS391A datasheet. The pull-up may connect to a compatible logic supply, but do not exceed the device's maximum output or absolute-maximum voltage ratings.
Place the input resistors and any reference close to the comparator to minimize parasitic pickup and comparator propagation delay. Route the two inputs away from switching nodes and keep the open-collector output trace short enough to avoid unwanted coupling. Respect the SOT-23-5 land pattern and confirm pin 1 orientation because pin 2 and pin 3 correspond to the inverting and noninverting inputs in the TS391 northwest arrangement.
The TS391ILT is a low-power analog IC rather than a discrete power transistor, so SOA data is not applicable. Its principal thermal concerns are the SOT-23-5 copper area and the local temperature around the comparator. Keep the device away from heat-generating components, provide adequate board copper, and verify that the chosen package temperature grade covers the maximum ambient and self-heating conditions.
Informations de conformité
The manufacturer datasheet and product page do not state the requested environmental-compliance fields for this exact ordering code, so each unconfirmed field remains unknown.