TUSB1002RGER - 10Gbps Dual USB 3.1 Redriver | Texas Instruments
Référence : TUSB1002RGER ✓ ActifTUSB1002RGER Présentation
A linear redriver is a type of USB signal conditioner that receives a degraded high-speed differential signal, restores its amplitude and timing margin, and retransmits the signal toward the next USB device. In the broader electronics hierarchy, a redriver belongs to the interface IC and signal-conditioning categories, where it complements controllers, hubs, transceivers, and retimers by recovering connectivity over cables, connectors, and printed circuit board traces.
The TUSB1002 uses a linear equalizer to address high-frequency attenuation. According to the Texas Instruments product information, it supports up to 16 dB of loss caused by Inter-Symbol Interference. The device also implements USB 3.1 low-power modes and an ultra-low-power architecture, helping reduce consumption during idle operation. Its 3.3 V supply requirement and 10 Gbps throughput suit equipment requiring long reaches between a USB host or hub and a peripheral.
The dual-channel arrangement gives designers flexibility for link-to-link signal conditioning. Each channel can be evaluated and configured for its own PCB or cable path, while common package placement simplifies routing around USB connectors. As a linear device, it preserves the signal waveform while improving amplitude; unlike a protocol-aware retimer, it does not need to recover and reconstruct USB timing at a data rate of 10 Gbps.
Typical uses include USB 3.1 docking stations, laptop and tablet accessories, external storage enclosures, industrial test equipment, servers, and data-acquisition systems. It is particularly useful when connector or PCB losses threaten eye closure between a USB host controller and an endpoint device.
Place the redriver close to the loss-producing connector or trace segment and follow the manufacturer datasheet's reference layout for high-speed differential routing. Decoupling, impedance control, return-path continuity, and the device's documented layout requirements are essential because an incorrectly positioned redriver can add loss rather than recover margin.
This page combines the manufacturer product description with engineering-oriented application analysis, design guidance, lifecycle considerations, and a strict review of drop-in replacement candidates. It is intended to help engineers determine whether the TUSB1002RGER fits a 10 Gbps USB 3.1 channel before committing it to a high-speed PCB layout.
Alternatives de remplacement direct pour TUSB1002RGER — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Aucune alternative de remplacement direct disponible pour ce produit.
Demander des alternativesTUSB1002RGER Spécifications
| Product Type | USB 3.1 dual-channel linear redriver |
| Maximum Data Rate | 10 Gbps |
| USB Standard | USB 3.1 SuperSpeedPlus |
| Channel Count | 2 channels |
| Signal Conditioning Type | Linear redriver |
| Supported Inter-Symbol Interference Loss | Up to 16 dB |
| Tension d'alimentation | 3.3 V |
| Minimum Supply Voltage | 3.00 V |
| Low-Power Mode Support | USB 3.1 low-power modes |
| Architecture | Ultra-low-power architecture |
| Boîtier | 24-VQFN (4 x 4 mm) |
| Nombre de broches | 24 pins |
| Type de montage | Surface mount |
Guide de configuration des broches du TUSB1002RGER 24-vqfn (4 x 4 mm)
Configuration des broches du TUSB1002RGER (boîtier 24-vqfn (4 x 4 mm)). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour TUSB1002RGER.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
TUSB1002RGER convient pour 6 applications: USB 3.1 Docking Stations, External Storage Enclosures, Industrial USB Test Equipment, Laptop and Tablet Accessories, USB Data-Acquisition Systems, Servers and High-Speed USB Expansion.
USB 3.1 Docking Stations
The TUSB1002RGER fits docking stations that must preserve 10 Gbps USB 3.1 SuperSpeedPlus links across connectors and internal printed circuit board transitions. Its two linear-redriver channels can condition two impaired paths in one 24-VQFN package, while equalization support for up to 16 dB of Inter-Symbol Interference loss can recover amplitude and eye margin. The 3.3 V supply and USB 3.1 low-power modes suit compact docks where standby power is important. Place each redriver near the associated high-speed connector or lossy trace segment, maintain continuous reference planes, and validate the completed channel with eye, jitter, and compliance measurements.
External Storage Enclosures
External storage enclosures often connect a host controller to a removable storage device through a connector and several PCB transitions that can attenuate USB 3.1 SuperSpeedPlus signals. The TUSB1002RGER can condition links operating up to 10 Gbps and can offset as much as 16 dB of Inter-Symbol Interference loss. Its dual-channel architecture provides flexibility when two host-to-device paths must be recovered. A linear redriver avoids protocol-aware timing reconstruction, but successful deployment still depends on the equalization setting, impedance-controlled differential routing, solid ground references, and measured receiver eye closure under the intended cable and enclosure conditions.
Industrial USB Test Equipment
Industrial USB test equipment benefits from a conditioned 10 Gbps link when stimulus and measurement points are separated by long traces, cables, or rugged connectors. The TUSB1002RGER supports two channels in a compact 4 x 4 mm VQFN, allowing a single device to condition both directions or two separate test lanes. Its linear equalizer can address up to 16 dB of Inter-Symbol Interference loss, and its 3.3 V operation integrates with many test systems. Engineers should characterize insertion loss, jitter, and crosstalk before adjustment, then preserve symmetry and controlled impedance around both channels.
Laptop and Tablet Accessories
The TUSB1002RGER is appropriate for compact laptop and tablet accessories that need robust USB 3.1 SuperSpeedPlus connectivity near high-loss connector transitions. Its 3.3 V supply, USB 3.1 low-power-mode support, and two-channel architecture support space-constrained portable designs. Compensation for up to 16 dB of Inter-Symbol Interference loss can help maintain link margin when internal routing or cable interfaces introduce attenuation. Placement remains decisive: put the redriver at the signal-loss boundary, avoid unnecessary stubs, maintain differential impedance, and confirm that low-power transitions do not disturb the configured equalization or receiver termination.
USB Data-Acquisition Systems
Data-acquisition systems can use the TUSB1002RGER to maintain 10 Gbps USB 3.1 signal integrity between a controller and remote acquisition hardware. Conditioning two channels permits recovery of independent links, which is useful when a system combines measurement data with a control or service connection. The redriver's linear equalization handles up to 16 dB of Inter-Symbol Interference loss without requiring a protocol-aware retimer. For laboratory-grade performance, characterize the complete path from controller through cable and adapter, verify common-mode and differential compliance, and validate eye closure over temperature rather than relying only on bench measurements at room temperature.
Servers and High-Speed USB Expansion
Servers and high-speed USB expansion systems can benefit from the TUSB1002RGER when a 10 Gbps USB 3.1 route includes connector or PCB losses that erode receiver margin. Two channels in one 24-VQFN permit efficient conditioning of separate SuperSpeedPlus paths, while the 3.3 V supply and low-power-mode support align with compact expansion hardware. The design must preserve hot-plug behavior, USB power-state transitions, reference-plane continuity, and controlled differential impedance. Because the device is a linear signal conditioner rather than a controller, firmware and enumeration remain the responsibility of the USB host or hub implementation.
Données de référence d'ingénierie pour TUSB1002RGER — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit |
|---|---|
| Brand | Texas Instruments |
| Package | 24-VQFN (4 x 4 mm) |
| Product Type | USB 3.1 dual-channel linear redriver |
| Maximum Data Rate | 10 Gbps |
| Channel Count | 2 channels |
| Supply Voltage | 3.3 V |
| Minimum Supply Voltage | 3.00 V |
| Supported Inter-Symbol Interference Loss | Up to 16 dB |
| Low-Power Mode Support | USB 3.1 low-power modes |
Principaux différenciateurs
- Two independently usable SuperSpeedPlus channels in one package (vs Single-channel USB 3.1 redrivers)
- Linear equalization for substantial channel loss (vs Protocol-aware USB retimers)
- USB 3.1 power-state support in a compact package (vs Higher-power legacy SuperSpeed redrivers)
Notes de conception
Follow the Texas Instruments datasheet layout for the 24-VQFN device and preserve continuous ground beneath the 10 Gbps differential traces. Place each redriver close to the connector or trace section where attenuation occurs, keep input and output routes short, remove unused test pads that create stubs, and maintain the specified differential impedance through layer transitions. A redriver cannot recover a channel whose routing violates return-path continuity or impedance control.
Use the manufacturer's recommended 3.3 V supply and decoupling arrangement, placing the bypass capacitor close to the device's supply and ground connections. Keep switching-regulator and digital return currents out of the redriver's quiet reference paths. The TUSB1002RGER supports USB 3.1 low-power modes, but power-state transitions should be tested with the complete host, hub, and peripheral combination to confirm that signal integrity remains compliant during entry into and exit from low-power states.
Do not substitute the TUSB1002ARGER without redesigning and revalidating the board. Texas Instruments support information identifies a changed terminal 14, different equalizer and DC gain settings, and changed receiver termination. These differences can make a package-compatible device electrically incompatible. For the TUSB1002RGER itself, avoid changing equalization or termination assumptions without comparing the actual channel response across production cable, adapter, and temperature conditions.
Informations de conformité
The available product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact TUSB1002RGER ordering code. Confirm current declarations with Texas Instruments before regulatory release.