Texas Instruments

TUSB1002RGER - 10Gbps Dual USB 3.1 Redriver | Texas Instruments

Артикул: TUSB1002RGER ✓ Активен
3.3 V Vdss 24-VQFN (4 x 4 mm) Package
MOQ: 1 |

TUSB1002RGER Обзор

The Texas Instruments TUSB1002RGER is a 10 Gbps dual-channel linear USB 3.1 redriver and signal conditioner in a 24-VQFN package measuring 4 x 4 mm. It operates from a 3.3 V supply, supports USB 3.1 SuperSpeedPlus signal rates, and can compensate for up to 16 dB of Inter-Symbol Interference loss. Its two-channel architecture allows one device to condition both sides of a USB link or two independent USB 3.1 paths.

A linear redriver is a type of USB signal conditioner that receives a degraded high-speed differential signal, restores its amplitude and timing margin, and retransmits the signal toward the next USB device. In the broader electronics hierarchy, a redriver belongs to the interface IC and signal-conditioning categories, where it complements controllers, hubs, transceivers, and retimers by recovering connectivity over cables, connectors, and printed circuit board traces.

The TUSB1002 uses a linear equalizer to address high-frequency attenuation. According to the Texas Instruments product information, it supports up to 16 dB of loss caused by Inter-Symbol Interference. The device also implements USB 3.1 low-power modes and an ultra-low-power architecture, helping reduce consumption during idle operation. Its 3.3 V supply requirement and 10 Gbps throughput suit equipment requiring long reaches between a USB host or hub and a peripheral.

The dual-channel arrangement gives designers flexibility for link-to-link signal conditioning. Each channel can be evaluated and configured for its own PCB or cable path, while common package placement simplifies routing around USB connectors. As a linear device, it preserves the signal waveform while improving amplitude; unlike a protocol-aware retimer, it does not need to recover and reconstruct USB timing at a data rate of 10 Gbps.

Typical uses include USB 3.1 docking stations, laptop and tablet accessories, external storage enclosures, industrial test equipment, servers, and data-acquisition systems. It is particularly useful when connector or PCB losses threaten eye closure between a USB host controller and an endpoint device.

Place the redriver close to the loss-producing connector or trace segment and follow the manufacturer datasheet's reference layout for high-speed differential routing. Decoupling, impedance control, return-path continuity, and the device's documented layout requirements are essential because an incorrectly positioned redriver can add loss rather than recover margin.

This page combines the manufacturer product description with engineering-oriented application analysis, design guidance, lifecycle considerations, and a strict review of drop-in replacement candidates. It is intended to help engineers determine whether the TUSB1002RGER fits a 10 Gbps USB 3.1 channel before committing it to a high-speed PCB layout.

Аналоги без доработки для TUSB1002RGER — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

TUSB1002RGER Характеристики

Product Type USB 3.1 dual-channel linear redriver
Maximum Data Rate 10 Gbps
USB Standard USB 3.1 SuperSpeedPlus
Channel Count 2 channels
Signal Conditioning Type Linear redriver
Supported Inter-Symbol Interference Loss Up to 16 dB
Напряжение питания 3.3 V
Minimum Supply Voltage 3.00 V
Low-Power Mode Support USB 3.1 low-power modes
Architecture Ultra-low-power architecture
Корпус 24-VQFN (4 x 4 mm)
Число выводов 24 pins
Тип монтажа Surface mount

Руководство по цоколевке TUSB1002RGER в корпусе 24-vqfn (4 x 4 mm)

Цоколевка для TUSB1002RGER (корпус 24-vqfn (4 x 4 mm)). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 24-vqfn (4 x 4 mm) для TUSB1002RGER

Нет подробных данных о распиновке для TUSB1002RGER.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TUSB1002RGER подходит для 6 применениеs: USB 3.1 Docking Stations, External Storage Enclosures, Industrial USB Test Equipment, Laptop and Tablet Accessories, USB Data-Acquisition Systems, Servers and High-Speed USB Expansion.

🔧

USB 3.1 Docking Stations

The TUSB1002RGER fits docking stations that must preserve 10 Gbps USB 3.1 SuperSpeedPlus links across connectors and internal printed circuit board transitions. Its two linear-redriver channels can condition two impaired paths in one 24-VQFN package, while equalization support for up to 16 dB of Inter-Symbol Interference loss can recover amplitude and eye margin. The 3.3 V supply and USB 3.1 low-power modes suit compact docks where standby power is important. Place each redriver near the associated high-speed connector or lossy trace segment, maintain continuous reference planes, and validate the completed channel with eye, jitter, and compliance measurements.

🖥️

External Storage Enclosures

External storage enclosures often connect a host controller to a removable storage device through a connector and several PCB transitions that can attenuate USB 3.1 SuperSpeedPlus signals. The TUSB1002RGER can condition links operating up to 10 Gbps and can offset as much as 16 dB of Inter-Symbol Interference loss. Its dual-channel architecture provides flexibility when two host-to-device paths must be recovered. A linear redriver avoids protocol-aware timing reconstruction, but successful deployment still depends on the equalization setting, impedance-controlled differential routing, solid ground references, and measured receiver eye closure under the intended cable and enclosure conditions.

🏭

Industrial USB Test Equipment

Industrial USB test equipment benefits from a conditioned 10 Gbps link when stimulus and measurement points are separated by long traces, cables, or rugged connectors. The TUSB1002RGER supports two channels in a compact 4 x 4 mm VQFN, allowing a single device to condition both directions or two separate test lanes. Its linear equalizer can address up to 16 dB of Inter-Symbol Interference loss, and its 3.3 V operation integrates with many test systems. Engineers should characterize insertion loss, jitter, and crosstalk before adjustment, then preserve symmetry and controlled impedance around both channels.

📱

Laptop and Tablet Accessories

The TUSB1002RGER is appropriate for compact laptop and tablet accessories that need robust USB 3.1 SuperSpeedPlus connectivity near high-loss connector transitions. Its 3.3 V supply, USB 3.1 low-power-mode support, and two-channel architecture support space-constrained portable designs. Compensation for up to 16 dB of Inter-Symbol Interference loss can help maintain link margin when internal routing or cable interfaces introduce attenuation. Placement remains decisive: put the redriver at the signal-loss boundary, avoid unnecessary stubs, maintain differential impedance, and confirm that low-power transitions do not disturb the configured equalization or receiver termination.

📊

USB Data-Acquisition Systems

Data-acquisition systems can use the TUSB1002RGER to maintain 10 Gbps USB 3.1 signal integrity between a controller and remote acquisition hardware. Conditioning two channels permits recovery of independent links, which is useful when a system combines measurement data with a control or service connection. The redriver's linear equalization handles up to 16 dB of Inter-Symbol Interference loss without requiring a protocol-aware retimer. For laboratory-grade performance, characterize the complete path from controller through cable and adapter, verify common-mode and differential compliance, and validate eye closure over temperature rather than relying only on bench measurements at room temperature.

🖥️

Servers and High-Speed USB Expansion

Servers and high-speed USB expansion systems can benefit from the TUSB1002RGER when a 10 Gbps USB 3.1 route includes connector or PCB losses that erode receiver margin. Two channels in one 24-VQFN permit efficient conditioning of separate SuperSpeedPlus paths, while the 3.3 V supply and low-power-mode support align with compact expansion hardware. The design must preserve hot-plug behavior, USB power-state transitions, reference-plane continuity, and controlled differential impedance. Because the device is a linear signal conditioner rather than a controller, firmware and enumeration remain the responsibility of the USB host or hub implementation.

What is the Texas Instruments TUSB1002RGER?
The TUSB1002RGER is a dual-channel linear redriver and signal conditioner for USB 3.1 SuperSpeedPlus links operating at up to 10 Gbps. According to the Texas Instruments product page, it uses a 3.3 V supply, supports USB 3.1 low-power modes, and can compensate for up to 16 dB of Inter-Symbol Interference loss. Its two channels can condition independent high-speed paths, making it useful in docking stations, hubs, test systems, and peripheral connections.
What are the key specifications of TUSB1002RGER that engineers should know?
The TUSB1002RGER combines two USB 3.1 linear-redriver channels, a maximum data rate of 10 Gbps, a 3.3 V supply, and compensation for as much as 16 dB of Inter-Symbol Interference loss. Texas Instruments describes it as the industry's first dual-channel USB 3.1 SuperSpeedPlus redriver with an ultra-low-power architecture and support for USB 3.1 low-power modes. The device is packaged in a 24-VQFN measuring 4 x 4 mm.
Where can I download the TUSB1002RGER datasheet PDF?
The official TUSB1002 datasheet is available through the Texas Instruments product page linked on this listing, with a dedicated part-details page also provided for TUSB1002RGER. The manufacturer datasheet is the appropriate document for the complete pin descriptions, recommended application circuit, electrical characteristics, and layout requirements. A third-party PDF index also identifies the TUSB1002RGER document as 28 pages, but the manufacturer-hosted document should be used for design decisions.
Where can I find the TUSB1002RGER pinout and package information?
The TUSB1002RGER uses a 24-pin VQFN package measuring 4 x 4 mm, as identified by the manufacturer and distributor listings. The exact pin names, exposed-pad connection, and package drawing should be taken from the pin-configuration section of the Texas Instruments datasheet. Do not infer the pinout from the TUSB1002A because Texas Instruments notes differences involving terminal 14, equalizer gain, DC gain, and receiver termination.
When should I choose the TUSB1002RGER over another USB redriver?
Choose the TUSB1002RGER when the design requires two independent 10 Gbps USB 3.1 channels in one 4 x 4 mm VQFN package. Its linear equalization can recover up to 16 dB of Inter-Symbol Interference loss, while the 3.3 V architecture and USB 3.1 low-power support suit power-conscious portable and docked systems. Choose another redriver only when its data rate, channel count, protocol coverage, or equalization range better matches the target link.
Is TUSB1002RGER suitable for a 10 Gbps docking station?
The TUSB1002RGER is suitable for many 10 Gbps docking-station links because it conditions USB 3.1 SuperSpeedPlus signals across up to 16 dB of Inter-Symbol Interference loss. Its dual-channel architecture can address two impaired paths while operating from a 3.3 V supply. The designer must still verify connector insertion loss, PCB impedance, return-path continuity, and the host-to-device electrical budget before treating the redriver as a guaranteed solution.
What is the difference between a linear redriver and a USB retimer?
A linear redriver amplifies and equalizes a differential signal without taking ownership of the protocol timing, while a protocol-aware retimer recovers timing and retransmits the data using a clocking architecture. The TUSB1002RGER uses a 10 Gbps linear equalizer and is intended to restore signal amplitude and margin. It therefore suits links whose main problem is attenuation, provided the designer completes the datasheet-prescribed layout and channel validation.
Can the TUSB1002ARGER replace the TUSB1002RGER?
The TUSB1002ARGER should not be treated as a confirmed drop-in replacement for the TUSB1002RGER without a detailed board-level review. Texas Instruments support information states that terminal 14 is different, equalizer gain and DC gain settings change, and receiver termination behavior changes. Those differences affect the footprint or circuit configuration even though both devices use a 24-VQFN package. A PCB redesign and channel-level validation are required rather than simple component substitution.
What is the best drop-in replacement for TUSB1002RGER?
No verified drop-in replacement is established for the TUSB1002RGER from the available manufacturer and cross-reference information. The TUSB1002ARGER is functionally related and uses the same 24-VQFN package, but Texas Instruments identifies material configuration differences at terminal 14 and in gain and termination. The TUSB1002RGET is the same device with a different ordering option rather than a distinct replacement. Use the Request a Quote form on this page to discuss sourcing the exact ordered MPN.
Is TUSB1002RGER the same as TUSB1002RGET?
TUSB1002RGER and TUSB1002RGET both identify the TUSB1002 device in a 24-pin VQFN package, but their ordering codes correspond to different orderable configurations. They should not be treated as distinct functional alternatives because the suffix change alone does not add a new redriver design. Confirm the exact orderable code, transport configuration, and manufacturer documentation for the finished assembly through the Request a Quote form on this page.
How does TUSB1002RGER help recover a degraded USB 3.1 link?
The TUSB1002RGER recovers degraded USB 3.1 SuperSpeedPlus links by applying linear equalization to signals attenuated by PCB traces, connectors, and cables. Texas Instruments specifies support for up to 16 dB of Inter-Symbol Interference loss at a maximum data rate of 10 Gbps. Recovery depends on the actual channel response and layout, so engineers should measure eye width, jitter, amplitude, and compliance at the receiver rather than relying only on the nominal 16 dB figure.
Where can I buy TUSB1002RGER online?
Use the Request a Quote form on this page to request the TUSB1002RGER, current availability, minimum order quantity, and lead time from XAIPART. The form avoids publishing a static commercial answer that can become stale between inventory refreshes. The exact TUSB1002RGER ordering code should be retained because related TUSB1002A and TUSB1002RGET configurations may have different board-level requirements.
What is the lead time for TUSB1002RGER?
The current lead time for TUSB1002RGER should be requested through the Request a Quote form on this page. Lead time can change with order quantity, inventory position, and the requested transport configuration, so it should not be inferred from general marketplace presence. When requesting a quotation, state the required quantity, date code, shipment destination, and whether reel presentation, dry-pack treatment, or other handling requirements apply.
Is TUSB1002RGER in stock?
Current TUSB1002RGER stock should be confirmed through the Request a Quote form on this page. Distributor listing presence does not guarantee an immediately shippable quantity, and a valid quotation should reflect the exact MPN rather than the broader TUSB1002 family. Provide your required quantity and delivery schedule so the response can reflect the appropriate fulfillment and logistics constraints.
What power-management design considerations apply to TUSB1002RGER?
The TUSB1002RGER operates from a 3.3 V supply and supports USB 3.1 low-power modes through its ultra-low-power architecture. Place the supply decoupling capacitance close to the device and use the manufacturer datasheet's recommended values and layout. Avoid routing noisy return currents beneath the signal-conditioning section, preserve a continuous ground reference beneath the 10 Gbps differential pair, and verify the power source can support both active and idle operation.
Is the TUSB1002RGER RoHS compliant and automotive qualified?
RoHS and REACH status, as well as AEC-Q100 qualification, must be confirmed from the current Texas Instruments product documentation and material declarations for the specific orderable MPN. The TUSB1002RGER is primarily identified as an industrial or commercial USB interface IC in the available product information, but automotive qualification cannot be assumed from the family name. Request the current compliance documents before using the device in a regulated or automotive design.

Справочные инженерные данные для TUSB1002RGER — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the TUSB1002RGER for a compact 10 Gbps USB 3.1 design that needs two linear signal-conditioning channels, a 3.3 V supply, and recovery from up to 16 dB of Inter-Symbol Interference loss. It is especially appropriate when the main impairment comes from connectors, cables, or PCB routing and protocol timing remains recoverable. Do not select the TUSB1002ARGER as a simple drop-in part: terminal 14, gain settings, and receiver termination differ, requiring board-level review. Do not select the TUSB1002RGET as a distinct functional alternative because it represents another ordering option for the same device family rather than a new redriver design. A protocol-aware retimer is preferable when timing recovery, not only amplitude, has failed, while a different redriver family should be considered when only one channel, a different protocol generation, or a different package is required.

Сравнение с аналогами

Параметр Этот товар
Brand Texas Instruments
Package 24-VQFN (4 x 4 mm)
Product Type USB 3.1 dual-channel linear redriver
Maximum Data Rate 10 Gbps
Channel Count 2 channels
Supply Voltage 3.3 V
Minimum Supply Voltage 3.00 V
Supported Inter-Symbol Interference Loss Up to 16 dB
Low-Power Mode Support USB 3.1 low-power modes

Ключевые отличия

  • Two independently usable SuperSpeedPlus channels in one package (против Single-channel USB 3.1 redrivers)
  • Linear equalization for substantial channel loss (против Protocol-aware USB retimers)
  • USB 3.1 power-state support in a compact package (против Higher-power legacy SuperSpeed redrivers)

Заметки по проектированию

Follow the Texas Instruments datasheet layout for the 24-VQFN device and preserve continuous ground beneath the 10 Gbps differential traces. Place each redriver close to the connector or trace section where attenuation occurs, keep input and output routes short, remove unused test pads that create stubs, and maintain the specified differential impedance through layer transitions. A redriver cannot recover a channel whose routing violates return-path continuity or impedance control.

Use the manufacturer's recommended 3.3 V supply and decoupling arrangement, placing the bypass capacitor close to the device's supply and ground connections. Keep switching-regulator and digital return currents out of the redriver's quiet reference paths. The TUSB1002RGER supports USB 3.1 low-power modes, but power-state transitions should be tested with the complete host, hub, and peripheral combination to confirm that signal integrity remains compliant during entry into and exit from low-power states.

Do not substitute the TUSB1002ARGER without redesigning and revalidating the board. Texas Instruments support information identifies a changed terminal 14, different equalizer and DC gain settings, and changed receiver termination. These differences can make a package-compatible device electrically incompatible. For the TUSB1002RGER itself, avoid changing equalization or termination assumptions without comparing the actual channel response across production cable, adapter, and temperature conditions.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The available product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact TUSB1002RGER ordering code. Confirm current declarations with Texas Instruments before regulatory release.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

TUSB1002RGER datasheet TUSB1002RGER pinout TUSB1002RGER datasheet pdf TUSB1002 datasheet TUSB1002 10Gbps redriver TUSB1002 VQFN-24 TUSB1002RGER equivalent TUSB1002RGER replacement TUSB1002RGER price Texas Instruments TUSB1002RGER TUSB1002RGER USB 3.1 application TUSB1002 vs TUSB1002A

Связанные компоненты & термины

Texas Instruments TUSB1002RGER TUSB1002 TUSB1002A TUSB1002RGET USB 3.1 USB 3.1 SuperSpeedPlus linear redriver signal conditioner USB interface IC linear equalizer Inter-Symbol Interference 10 Gbps 3.3 V power supply USB low-power mode 24-VQFN package surface-mount package docking station external storage enclosure industrial test equipment data-acquisition system differential signal RoHS REACH AEC-Q100
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ