TUSB9260PVP - USB 3.0 to SATA Bridge | TI Storage
Référence : TUSB9260PVP ✗ Fin de vieTUSB9260PVP Présentation
A USB-to-SATA bridge is an interface controller that translates commands and data between a USB host and a Serial ATA drive. This USB 3.0-to-SATA bridge sits within the interface-controller and storage-connectivity hierarchy, allowing compatible storage equipment to use USB connectivity while retaining a SATA device interface. Its microcontroller-based implementation supports the command, data, and power-management functions needed for USB-attached storage.
The TUSB9260PVP provides SuperSpeed USB 3.0 operation together with USB 2.0 support, enabling it to serve as the storage interface in systems that need backward compatibility with slower USB links. The manufacturer identifies the product as a USB 3.0-to-Serial ATA bridge, while the component listing identifies the interface as an SPI serial interface with 1.1 V, 1.8 V, and 3.3 V supply options.
The TUSB9260 architecture combines an ARM Cortex-M3 microcontroller with dedicated USB-to-SATA bridge hardware and firmware support. This implementation is intended to provide the necessary protocol translation for USB-attached storage devices. Designers should allocate separate routing for high-speed USB and SATA signals, maintain continuous return-path references, and observe the exposed-pad requirements of the HTQFP package.
Typical uses include external storage enclosures, USB-to-SATA adapters, backup appliances, and industrial data-acquisition systems that require an established USB 3.0 host connection to a SATA drive. The device can also serve in equipment where a legacy SATA storage interface must remain accessible through a newer USB-facing system architecture.
Layout quality is central to reliable SuperSpeed operation. Place differential USB and SATA pairs over continuous ground planes, use short matched routing, minimize stub lengths, and provide low-impedance power distribution for 1.1 V, 1.8 V, and 3.3 V rails. Follow the manufacturer pin-description table and layout guidance when assigning tracks and connecting the exposed thermal pad.
This product page combines the exact package, supply, interface, and lifecycle characteristics with a design-focused comparison against TUSB9261PVP. It also identifies practical implementation considerations for USB 3.0-to-SATA storage products and distinguishes documented pin-compatible upgrades from alternatives requiring broader hardware validation.
Alternatives de remplacement direct pour TUSB9260PVP — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec TUSB9260PVP (même facteur de forme et même empreinte) — différant par Product Type.
TUSB9261PVP
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →TUSB9260PVP Spécifications
| Product Type | SuperSpeed USB 3.0 to Serial ATA bridge |
| Controller Core | ARM Cortex-M3 microcontroller |
| USB Interface | USB 3.0 SuperSpeed with USB 2.0 support |
| Storage Interface | Serial ATA bridge |
| SPI Serial Interface | Supported |
| Low Supply Voltage | 1.1 V |
| Intermediate Supply Voltage | 1.8 V |
| High Supply Voltage | 3.3 V |
| Boîtier | 64-pin HTQFP with exposed pad, 7 mm x 7 mm |
| Type de montage | Surface mount |
| Packaging | Tray |
| Product Status | Not for new designs |
| Primary Application | Hard drive interface and USB-attached storage |
Guide de configuration des broches du TUSB9260PVP 64-pin htqfp with exposed pad, 7 mm x 7 mm
Configuration des broches du TUSB9260PVP (boîtier 64-pin htqfp with exposed pad, 7 mm x 7 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour TUSB9260PVP.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
TUSB9260PVP convient pour 6 applications: USB-to-SATA External Storage Enclosures, USB 3.0 Hard Drive Adapters, Portable Backup Appliances, Industrial Storage Gateways, Secure Data Acquisition Systems, Legacy SATA Equipment Refresh.
USB-to-SATA External Storage Enclosures
The TUSB9260PVP is a USB 3.0-to-SATA bridge.
USB 3.0 Hard Drive Adapters
The TUSB9260PVP translates between USB 3.0 and Serial ATA.
Portable Backup Appliances
The TUSB9260PVP supports portable USB storage systems.
Industrial Storage Gateways
The TUSB9260PVP bridges industrial USB hosts and SATA storage.
Secure Data Acquisition Systems
The TUSB9260PVP links USB acquisition hosts with SATA media.
Legacy SATA Equipment Refresh
The TUSB9260PVP adds a USB-facing path for SATA equipment.
Données de référence d'ingénierie pour TUSB9260PVP — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | TUSB9261PVP |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 64-HTQFP (7x7) with exposed pad | 64-HTQFP (7x7) |
| Product Function | SuperSpeed USB 3.0 to Serial ATA bridge | USB-to-SATA bridge with newer USB specification compliance |
| USB Version Support | USB 3.0 and USB 2.0 | Newer USB specification compliance |
| Mounting Type | Surface mount | Surface mount |
Principaux différenciateurs
- Direct pin-to-pin upgrade path (vs TUSB9261PVP)
- Integrated USB 2.0 and USB 3.0 support (vs TUSB9261PVP)
- Microcontroller-based protocol conversion (vs TUSB9261PVP)
Notes de conception
Route USB and SATA differential pairs over continuous ground references, maintain length matching where the interface specification requires it, and remove unnecessary pads, test points, and stubs. Place decoupling and interface-support components close to their associated pins. SuperSpeed links are sensitive to discontinuities and reference-plane changes, so validate the final stack-up and controlled-impedance geometry with the PCB fabricator.
Design the power tree for 1.1 V, 1.8 V, and 3.3 V rails with low-impedance planes or wide traces and local bulk and high-frequency decoupling at the bridge. Use the manufacturer power-supply sequence and voltage tolerances to determine startup order and capacitor selection. Avoid sharing narrow supply paths with unrelated noisy loads, particularly when the enclosure contains motor, fan, or display circuitry.
Connect the exposed pad through the package land pattern to a ground plane using the thermal-via arrangement specified by the manufacturer. Estimate junction temperature from ambient temperature, package dissipation, and the board-dependent thermal resistance rather than assuming an unlimited heat path. Check the exposed-pad soldering process and coplanarity because voiding beneath the pad can increase junction temperature and reduce long-term reliability.
Informations de conformité
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is stated in the cited product records. Confirm the applicable declarations with Texas Instruments for the ordered device and package.