Microchip Technology

VSC8531XMW-01 - 1-Port Gigabit Copper PHY | Microchip

Référence : VSC8531XMW-01 ✓ Actif
48-QFN, 6 mm x 6 mm Package
MOQ : 1 |

VSC8531XMW-01 Présentation

The Microchip Technology VSC8531XMW-01 is a single-port Gigabit Ethernet copper PHY supporting 10/100/1000BASE-T operation through RGMII or RMII interfaces. It provides a 1 Gbps data rate, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN support, and broad LVCMOS interface-voltage compatibility in a 48-QFN package measuring 6 mm x 6 mm with a 0.4 mm terminal pitch.

A copper PHY is an interface integrated circuit that converts data between a digital network processor and physical copper wiring. It belongs to the Ethernet interface IC hierarchy: PHY transceiver, physical-layer device, network interface IC, and semiconductor. The VSC8531XMW-01 combines 10/100/1000BASE-T physical signaling with configurable MAC-facing interfaces, allowing a network processor, router, switch, or embedded system to communicate through standard twisted-pair Ethernet links.

Key features include one Gigabit copper port, RGMII and RMII support, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN operation, hardware-configured operating modes, and configurable MAC-interface drive strength. The broad I/O LVCMOS support is useful when the PHY must interface with systems using different logic levels. Hardware configuration is performed by sampling output pins on the rising edge of reset and holding selected pins high or low, reducing the need for complex register initialization in straightforward designs.

The device is designed for space-constrained equipment where a 6 mm x 6 mm surface-mount package is valuable. Its single-row 48-QFN construction supports compact routing while providing separate Ethernet and MAC-side interfaces. According to the Microchip VSC8531-01 datasheet, the device can also operate in systems that power terminal equipment through the twisted pair in accordance with the power-over-Ethernet arrangement described in IEEE 802.3af Clause 33. Exact operating limits, internal clock requirements, and recommended magnetics depend on the selected system configuration.

Typical applications include compact routers, Ethernet switches, industrial control equipment, set-top and network appliances, USB-to-Ethernet products, and embedded systems requiring 10/100/1000BASE-T connectivity. RGMII is appropriate for higher-throughput parallel processor interfaces, while RMII reduces pin count in cost- and power-sensitive embedded designs. Wake-on-LAN can support remote wake-up behavior in network equipment, and Energy Efficient Ethernet can reduce link activity when the traffic load is low.

PCB implementation should follow the manufacturer's hardware design checklist for magnetics, termination, clocking, decoupling, and differential pair routing. Keep the PHY, Ethernet magnetics, and high-speed copper traces close together, provide the specified decoupling capacitors close to their supply pins, and route each differential pair as a controlled-impedance pair with minimal vias. Do not infer the complete pin configuration from a marketplace summary; use the pin-description and layout sections in the manufacturer datasheet before releasing a PCB.

This page organizes the principal device identity, package information, application guidance, comparison points, and design considerations into one engineering-focused reference. It also distinguishes the exact VSC8531XMW-01 order code from related VSC8531 variants so procurement and PCB reuse decisions can be made against the appropriate Microchip ordering information.

Alternatives de remplacement direct pour VSC8531XMW-01 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec VSC8531XMW-01 (même facteur de forme et même empreinte) — différant par MAC Interface, Package, Product Type, Wake-on-LAN.

Microchip Technology
MAC Interface: RGMII and RMII
Package: 48-QFN, 6 mm x 6 mm, single-row
Comparer avec VSC8531XMW-01 →
Microchip Technology
MAC Interface: RGMII / RMII
Package: 48-QFN (6 mm x 6 mm)
Product Type: Ethernet PHY (10/100/1000BASE-T)
Comparer avec VSC8531XMW-01 →

VSC8531XMW-05

✅ Remplacement direct
Microchip Technology
📦 48-QFN (6 mm x 6 mm)
Ethernet PHY (10/100/1000BASE-T) · 1 · RGMII / RMII · 10/100/1000 Mbps · Copper (Cat 5e/6) · 3.3 V (single) · 1.0 V and 1.2 V LDO on-chip · -40 C to +85 C (Industrial)

Contactez-nous pour le prix

Voir la fiche technique →

VSC8531XMW

✅ Remplacement direct
Microchip Technology
📦 48-QFN (6 mm x 6 mm)
Single-port Gigabit Ethernet copper PHY · 10/100/1000BASE-T · RGMII and RMII · 1 port · 48-QFN, 6 mm x 6 mm, single-row · Yes · RGMII version 2.0 standard timing compliant compensation · Eliminated by integrated RGMII timing compensation

Contactez-nous pour le prix

Voir la fiche technique →

VSC8531XMW-01 Spécifications

Product Type Single-port Gigabit Ethernet copper PHY
Ethernet Port Count 1 port
Maximum Data Rate 1000 Mbps
Supported Ethernet Rates 10/100/1000BASE-T
MAC Interface RGMII or RMII
Energy Efficient Ethernet IEEE 802.3az EEE
Power over Ethernet Support IEEE 802.3af Clause 33 system compatibility
Wake-on-LAN Supported
Interface Logic LVCMOS
Boîtier 48-QFN, 6 mm x 6 mm
Package Construction Single-row QFN
Terminal Pitch 0.4 mm
Type de montage Surface mount
Configuration Method Hardware strap configuration sampled on rising edge of reset
MAC Drive Strength Configurable

Guide de configuration des broches du VSC8531XMW-01 single-row qfn

Configuration des broches du VSC8531XMW-01 (boîtier single-row qfn). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier single-row qfn pour le VSC8531XMW-01

Aucune donnée de brochage détaillée disponible pour VSC8531XMW-01.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

VSC8531XMW-01 convient pour 6 applications: Compact Ethernet Router, Industrial Ethernet Control, USB-to-Ethernet Adapter, Network Appliance, Low-Power IoT Gateway, Set-Top and Media Device.

🌐

Compact Ethernet Router

The VSC8531XMW-01 fits a compact router requiring one 10/100/1000BASE-T copper port. Its RGMII interface supports a parallel MAC connection to a network processor at a maximum 1 Gbps physical rate, while RMII can reduce host-interface pin count in lower-complexity designs. The 6 mm x 6 mm 48-QFN package also conserves board area compared with larger Ethernet PHY packages. A practical implementation places the PHY near the RJ45 connector and Ethernet magnetics, then routes the copper pairs as short differential pairs. Configuration straps must be assigned according to the manufacturer reset-sampling requirements, and the clock source must satisfy the selected MAC-interface mode.

🏭

Industrial Ethernet Control

The VSC8531XMW-01 can support an industrial Ethernet control endpoint with one copper network connection. Its 10/100/1000BASE-T support allows interoperability across common industrial and office network speeds, and hardware-configured operating modes help simplify systems that do not need extensive software initialization. The device should be paired with magnetics and isolation components appropriate to the installation's isolation and surge requirements. Engineers should verify the exact operating-temperature limits, creepage requirements, grounding strategy, and conducted-emissions performance for the final enclosure and power architecture before using the PHY in a safety- or mission-critical installation.

🔗

USB-to-Ethernet Adapter

The VSC8531XMW-01 is suitable for a USB-to-Ethernet adapter that needs one gigabit copper port. Its configurable parallel MAC interface can accommodate suitable USB-to-Ethernet controller arrangements, while the 6 mm x 6 mm package helps maintain a compact dongle or USB card form factor. The RGMII path can support higher-throughput traffic, whereas RMII may be preferable for a lower-cost or lower-power host connection. Because adapter boards often rely on a shared USB and Ethernet power source, the implementation must maintain clean PHY, magnetics, and digital supplies with local decoupling close to the relevant pins.

🖥️

Network Appliance

The VSC8531XMW-01 is appropriate for a compact network appliance that requires a single wired network connection. The PHY handles copper physical signaling at rates up to 1000 Mbps and offers RGMII or RMII host connectivity, allowing the system architect to match the interface to the application processor. Its single-row 48-QFN package supports dense board layouts, although careful magnetics placement and controlled-impedance routing remain necessary. IEEE 802.3az Energy Efficient Ethernet can reduce activity during low-traffic periods, while Wake-on-LAN supports compatible remote-wakeup functions. The exact power-management behavior should be validated through the manufacturer's register and application guidance.

🧩

Low-Power IoT Gateway

The VSC8531XMW-01 can serve as the wired Ethernet interface in a low-power IoT gateway. The device combines one Gigabit copper port with IEEE 802.3az Energy Efficient Ethernet, allowing the link to reduce signaling activity when traffic is light. Wake-on-LAN can support remote activation when the remote endpoint is configured for that function. The 6 mm x 6 mm 48-QFN package is useful in gateways where connector placement and board area are constrained. Designers should still evaluate total board power, magnetics loss, thermal behavior, and the PHY's clocking configuration, because low-power link operation does not remove the need for correct high-speed layout and supply decoupling.

📺

Set-Top and Media Device

The VSC8531XMW-01 suits a set-top or media device that needs one Ethernet port for network services and content delivery. A 1 Gbps copper PHY provides a high-bandwidth link for local-network media, while RGMII or RMII lets the design match a selected host processor. The compact 48-QFN package supports space-constrained consumer electronics, and Energy Efficient Ethernet can benefit intermittent-traffic networks. Engineering teams should confirm operating-temperature limits for the enclosure environment and follow the manufacturer hardware checklist for transformer selection, center-tap capacitance, reference-clock routing, and differential-pair geometry to maintain reliable link performance.

What is the VSC8531XMW-01?
The VSC8531XMW-01 is a single-port Gigabit Ethernet copper PHY from Microchip Technology. According to the Microchip VSC8531-01 datasheet, it supports 10/100/1000BASE-T operation with RGMII or RMII MAC interfaces. The device is packaged in a 6 mm x 6 mm 48-QFN package with a 0.4 mm terminal pitch and is intended for compact Ethernet equipment.
What Ethernet speeds does VSC8531XMW-01 support?
The VSC8531XMW-01 supports 10 Mb/s, 100 Mb/s, and 1 Gb/s operation over copper cabling. According to the Microchip VSC8531-01 datasheet, the PHY is designed for 10/100/1000BASE-T networks and provides a fully compliant parallel MAC interface. Its maximum advertised data rate is 1000 Mbps through one copper port.
Where can I download the VSC8531XMW-01 datasheet PDF?
The official VSC8531-01 datasheet PDF is available from Microchip Technology through the VMDS-10494 download link. It covers the VSC8531 family used by the VSC8531XMW-01 order code, including electrical operation, configuration pins, interfaces, and application information. Use the manufacturer PDF when assigning pins or designing the PCB.
Where can I find the VSC8531XMW-01 pinout?
The VSC8531XMW-01 pinout is documented in the pin-description section of the Microchip VSC8531-01 datasheet and the associated VSC8531 Hardware Design Checklist. The device uses a 48-QFN package. Assign every signal from those documents because configuration strapping, reset behavior, clocking, and supply connections determine whether the PHY operates correctly.
Does VSC8531XMW-01 support RGMII and RMII?
Yes, the VSC8531XMW-01 supports both RGMII and RMII through its parallel MAC interface. According to the Microchip VSC8531-01 datasheet, hardware configuration determines the operating mode by sampling output pins on the rising edge of reset. RGMII supports higher-throughput parallel signaling, while RMII is useful when a lower-pin-count interface is preferred.
What is the difference between VSC8531XMW-01 and VSC8531XMW-05?
Both are VSC8531-family single-port Gigabit copper PHYs offered in the 48-QFN 6 mm x 6 mm package, and both support 1000 Mbps operation. Their exact configuration and ordering characteristics must be checked against their respective Microchip product documentation. The VSC8531XMW-05 appears in manufacturer distribution results, but the snippets do not establish every electrical difference.
Can VSC8531XMW-01 be used in an industrial Ethernet device?
The VSC8531XMW-01 can be used in industrial Ethernet equipment when its specified electrical, temperature, isolation, and environmental requirements are met. According to the Microchip VSC8531-01 datasheet, it is a low-power copper PHY for 10/100/1000BASE-T systems. Confirm the operating-temperature limits and applicable EMC design requirements before production release.
What is the best drop-in replacement for VSC8531XMW-01?
The VSC8531XMW and VSC8531XMW-05 are the closest identified same-family options, but a true drop-in decision requires confirmation of package pinout, configuration straps, clocking, supply sequencing, and temperature grade. Microchip's VSC8531 family uses the same 48-QFN 6 mm x 6 mm outline, yet suffix-specific behavior can prevent unconditional substitution.
What Microchip equivalent can replace VSC8531XMW-01?
Microchip's VSC8531XMW and VSC8531XMW-05 are the relevant same-family candidates for the VSC8531XMW-01. Both use the VSC8531 single-port Gigabit copper PHY architecture and the 48-QFN 6 mm x 6 mm package. Use Microchip's cross-reference and ordering documentation to verify that the selected suffix matches the required reset, clock, strap, and temperature requirements.
Is VSC8531XMW-01 suitable for a compact router?
The VSC8531XMW-01 is suitable for a compact router that requires one 10/100/1000BASE-T copper port. According to the Microchip VSC8531-01 datasheet, the 6 mm x 6 mm 48-QFN package supports space-constrained networking equipment, while RGMII or RMII provides flexibility for different host processors. The final design must also meet EMC, thermal, and isolation requirements.
How do I request the price and lead time for VSC8531XMW-01?
Use the Request a Quote form on this page to request current pricing, stock confirmation, minimum order quantity, and lead time for VSC8531XMW-01. Quote requests should include the exact order code, target quantity, and required date. Avoid substituting the related VSC8531XMW-05 or VSC8531XMW without confirming their suffix-specific configuration requirements.
Where can I buy VSC8531XMW-01 online?
The Request a Quote form on this page is the purchasing route for VSC8531XMW-01. Enter the exact quantity, packaging preference, ship-to region, and required delivery date to obtain a current quotation. Because the device includes suffix-specific order information, the quote should identify VSC8531XMW-01 rather than the broader VSC8531 family name.
Is VSC8531XMW-01 in stock?
Current inventory for VSC8531XMW-01 should be confirmed through the Request a Quote form on this page. The form allows buyers to request current stock, allocation, minimum order quantity, and lead time for the exact MPN. For production planning, include a safety margin because component inventory and lifecycle conditions can change.
Does VSC8531XMW-01 support Energy Efficient Ethernet and Wake-on-LAN?
The VSC8531XMW-01 supports IEEE 802.3az Energy Efficient Ethernet and Wake-on-LAN operation. According to the Microchip product page, these functions complement the device's single-port 10/100/1000BASE-T copper operation. EEE can lower link energy use during low traffic, while WoL supports remote network activity in compatible equipment.
What are the key specifications of VSC8531XMW-01 that engineers should know?
The principal specifications are one copper port, a maximum 1000 Mbps data rate, 10/100/1000BASE-T support, RGMII or RMII MAC connectivity, IEEE 802.3az EEE, and Wake-on-LAN. The Microchip VSC8531-01 datasheet also describes hardware configuration through reset-edge strap sampling, while the device uses a 6 mm x 6 mm 48-QFN package with 0.4 mm pitch.
What can replace VSC8531XMW-01?
VSC8531XMW and VSC8531XMW-05 are the same-family replacement candidates identified for VSC8531XMW-01. Both retain the VSC8531 single-port Gigabit copper PHY architecture and 48-QFN 6 mm x 6 mm package, but engineers should verify the pin behavior, configuration straps, clock source, temperature grade, and lifecycle status before treating either candidate as a drop-in substitute.

Données de référence d'ingénierie pour VSC8531XMW-01 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose VSC8531XMW-01 for a single-port 10/100/1000BASE-T design that needs RGMII or RMII, IEEE 802.3az Energy Efficient Ethernet, or Wake-on-LAN in a compact 48-QFN implementation. VSC8531XMW-05 is the closest identified same-family order code and retains the same package and Gigabit copper-PHY architecture, making it the first candidate to investigate when availability or lifecycle planning requires a change. VSC8531XMW is another same-family candidate without the -01 or -05 suffix. Treat all three as conditional drop-ins: verify pin behavior, configuration straps, clocking, temperature grade, supply limits, and qualification for the exact suffix before changing a released PCB. No cross-brand alternative is recommended without a manufacturer-specific cross-reference and verified pin compatibility. For new mixed-signal products, prioritize the VSC8531 hardware design checklist, magnetics selection, and controlled-impedance layout over nominal feature matching alone.

Comparaison avec les alternatives

Paramètre Ce produit VSC8531XMW-05 VSC8531XMW
Brand Microchip Technology Microchip Technology Microchip Technology
Package 48-QFN (6 mm x 6 mm) 48-QFN (6 mm x 6 mm) 48-QFN (6 mm x 6 mm)
Port Count 1 copper port 1 copper port 1 copper port
Maximum Data Rate 1000 Mbps 1000 Mbps 1000 Mbps
Supported Ethernet Rates 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T
Order Code VSC8531XMW-01 VSC8531XMW-05 VSC8531XMW

Principaux différenciateurs

  • Combines one Gigabit copper port with both RGMII and RMII host options (vs VSC8531XMW-05)
  • Adds IEEE 802.3az Energy Efficient Ethernet for link-power control (vs VSC8531XMW)
  • Uses a compact single-row surface-mount package (vs VSC8531XMW-05)

Notes de conception

Follow the VSC8531 Hardware Design Checklist when placing the PHY, magnetics, and RJ45 interface. Position the Ethernet transformer close to the PHY and keep the four copper pairs short, symmetric, and routed as controlled-impedance differential pairs. Minimize vias and keep switching nodes and unrelated high-current paths away from the PHY and magnetics region. The checklist also addresses Auto-MDIX magnetics requirements, which should be resolved before schematic release.

Assign the hardware configuration straps using the datasheet's reset-sampling method and validate every pulled-high or pulled-low state against the intended operating mode. Resistor values, nearby return paths, and the reset transition sequence can determine the final configuration. Check the selected strap against the VSC8531XMW-01 datasheet rather than copying a layout from a different VSC8531 suffix without comparing its ordering information.

Use the manufacturer-recommended supply network and place the required bypass capacitors immediately adjacent to the corresponding VSC8531XMW-01 supply pins. Keep the switching supply, PHY, magnetics, and digital circuitry separated to limit coupling into the Ethernet signal path. Because exact supply-voltage limits and capacitor values are not stated in the accessible product summaries, the final schematic and layout must use the values in the manufacturer datasheet.

Treat the RGMII or RMII interface as a timing-critical parallel bus. Route MAC signals over a continuous reference plane, minimize stubs, and follow the source-synchronous timing requirements in the datasheet. Confirm the required reference clock and its jitter margin with the host controller. Auto-MDIX operation also requires suitable magnetics, so validate the complete PHY-magnetics combination instead of treating the copper interface as a generic digital port.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The accessible product information does not state the device's RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. IEEE 802.3az and IEEE 802.3af Clause 33 are functional Ethernet references, not product-compliance certifications.

Données vérifiées le : 2026-11-16 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

vsc8531xmw 05 datasheet VSC8531XMW-01 datasheet VSC8531XMW-01 datasheet pdf VSC8531XMW-01 pinout VSC8531XMW-01 equivalent VSC8531XMW-01 replacement VSC8531XMW-01 vs VSC8531XMW-05 VSC8531XMW-01 footprint VSC8531XMW-01 RGMII RMII VSC8531XMW-01 Ethernet PHY VSC8531XMW-01 price VSC8531XMW-01 stock Microchip VSC8531XMW-01 48-QFN Gigabit Ethernet PHY

Composants & termes associés

Microchip Technology VSC8531XMW-01 VSC8531XMW-05 VSC8531XMW Gigabit Ethernet PHY Copper PHY Physical-layer device Ethernet interface IC Network interface IC RGMII RMII 10/100/1000BASE-T IEEE 802.3az Energy Efficient Ethernet IEEE 802.3af Wake-on-LAN LVCMOS 48-QFN 6 mm x 6 mm QFN Surface mount Ethernet magnetics Auto-MDIX Hardware strap configuration Single-port Gigabit Ethernet
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ