Nuvoton Technology Corporation

W77L516A25DL - 8-Bit 25MHz 8051 MCU | Nuvoton | DIP-40

Référence : W77L516A25DL ✓ Actif
40-DIP through-hole package Package 25 MHz Speed 64 KB flash (64K x 8) Memory
MOQ : 1 |

W77L516A25DL Présentation

The Nuvoton Technology Corporation W77L516A25DL is an 8-bit W77 8051-compatible microcontroller with a 25 MHz clock, 64 KB of flash program memory, 1 KB of RAM, and 32 I/O pins in a 40-DIP through-hole package. The part combines the established 8051 programming model with a redesigned processor core that reduces wasted clock and memory cycles, allowing many instructions to execute faster than on a traditional 8051 at the same crystal frequency.

A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripheral interfaces on one device. The W77L516A belongs to the 8051-compatible MCU family within the broader embedded-controller and integrated-circuit hierarchy. This architecture is useful for industrial controllers, embedded I/O systems, and legacy-compatible products that benefit from an established instruction set and a broad selection of supporting software and peripheral devices.

The W77L516A25DL provides 64 KB of flash program memory, 1 KB of internal RAM, 32 general-purpose I/O lines, and operation up to 25 MHz. Its 40-DIP mechanical format supports through-hole assembly and is suited to industrial control boards, test fixtures, embedded instruments, and legacy peripheral-controller designs. Flash memory retains programmed instructions without power, while the available RAM supports working variables, stack operations, and data buffering.

The redesigned W77 processor core is the principal technical distinction from an original 8051 implementation. The manufacturer datasheet states that instruction execution is typically 1.5 to 3 times faster than a traditional 8051 at the same crystal speed, depending on the instruction type. This improvement can increase useful processing capacity without changing the nominal clock rate, although final application performance still depends on instruction mix, memory organization, interrupt handling, and peripheral timing.

Typical applications include industrial automation controllers, data-acquisition front ends, keypad and display interfaces, motor or relay supervisory logic, test and measurement equipment, and embedded communication modules. A system designer can use the 32 I/O pins for digital inputs, outputs, interrupt-capable signals, serial functions, and external memory or peripheral interfaces, subject to the port configuration and multiplexing described in the manufacturer datasheet.

The principal design consideration is hardware compatibility. Before replacing an original 8051 design, verify oscillator requirements, reset behavior, port pin functions, memory addressing, interrupt vectors, external-memory timing, and peripheral pin assignments. The 25 MHz clock rating also requires a suitable crystal or clock source, correct bypass capacitors, and a PCB layout that preserves signal integrity around the oscillator and reset circuitry.

This product overview combines the core architecture, memory configuration, package characteristics, replacement considerations, and application guidance with practical information for engineers evaluating the W77L516A25DL in new or legacy 8051-compatible designs.

Alternatives de remplacement direct pour W77L516A25DL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Aucune alternative de remplacement direct disponible pour ce produit.

Demander des alternatives

W77L516A25DL Valeurs maximales et caractéristiques électriques

Microcontroller Type 8-bit 8051-compatible W77 microcontroller
Processor Architecture W77 redesigned 8051-compatible core
Fréquence d'horloge maximale 25 MHz
Program Memory Size 64 KB flash (64K x 8)
RAM Size 1 KB (1K x 8)
Number of I/O Pins 32
Boîtier 40-DIP through-hole package
Type de montage Through-hole
Instruction Execution Performance Typically 1.5 to 3 times faster than a traditional 8051 at the same crystal speed
Program Memory Type Flash memory

Guide de configuration des broches du W77L516A25DL 40-dip through-hole package

Configuration des broches du W77L516A25DL (boîtier 40-dip through-hole package). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 40-dip through-hole package pour le W77L516A25DL

Aucune donnée de brochage détaillée disponible pour W77L516A25DL.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

W77L516A25DL convient pour 6 applications: Industrial Automation Controller, Data-Acquisition Front End, Test and Measurement Equipment, Embedded Communication Module, Motor and Relay Supervisory Logic, Legacy 8051 Embedded Product.

🏭

Industrial Automation Controller

The W77L516A25DL is appropriate for a supervisory industrial controller that coordinates discrete inputs, output states, interlocks, and operator commands. Its 32 I/O pins provide a substantial digital interface for limit switches, status indicators, relays, and panel controls, while 64 KB of flash holds application firmware and 1 KB of RAM provides working storage. The 25 MHz W77 core executes typical instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same clock speed. A production design should add galvanic isolation, surge protection, and environmental filtering wherever the controller connects to industrial wiring.

📟

Data-Acquisition Front End

The W77L516A25DL can manage digital acquisition tasks that require sequencing, status tracking, local control, and communication buffering. Its 8051-compatible architecture is useful when an existing acquisition platform already uses 8051 firmware and peripheral conventions. The 32 I/O lines can support sensor enables, sample strobes, alarm inputs, and interface signals, while the 25 MHz core provides more useful instruction throughput than a traditional 8051 operating at the same clock speed. For analog measurement channels, add dedicated converters and interface circuitry rather than relying on the microcontroller pins for precision signal conditioning.

🧪

Test and Measurement Equipment

The W77L516A25DL is well suited to instrument-control and fixture-management functions where a deterministic 8051-compatible execution model is useful. Its 64 KB flash capacity accommodates control sequences, calibration tables, and test routines, while 32 I/O lines can operate front-panel controls, relay drivers, indicators, and instrument handshake signals. The redesigned processor core can complete many common instruction sequences 1.5 to 3 times faster than a traditional 8051 at the same crystal speed. Designers should follow the manufacturer’s oscillator and reset recommendations to prevent timing errors at the 25 MHz operating limit.

🌐

Embedded Communication Module

The W77L516A25DL can serve as the supervisory controller in an embedded communication module built around a separate network or serial transceiver. The microcontroller manages framing, status, configuration, timeout handling, and user-facing I/O while its 32 digital lines support control signals and diagnostics. Its 8051-compatible programming model eases migration of established protocol firmware, and the W77 core is typically 1.5 to 3 times faster than a traditional 8051 at the same crystal speed. The communication PHY remains a separate function, so interface voltage levels, termination, isolation, and protocol timing must be designed independently.

🔧

Motor and Relay Supervisory Logic

The W77L516A25DL is suitable for supervisory control of relays, solenoids, stepper systems, and interlock sequences where the MCU handles sequencing rather than directly driving high-current loads. Its 32 I/O pins allow input monitoring and output-command distribution, and its 1 KB RAM can support state tables and timing variables. The W77 processor improves instruction throughput relative to a traditional 8051 at the same crystal speed, which is useful in state-machine and debounce routines. Use external drivers, protection networks, and flyback components rated for the actual load and voltage.

🖥️

Legacy 8051 Embedded Product

The W77L516A25DL is a logical candidate when extending or rebuilding a product around an established 8051 instruction set and through-hole assembly process. Existing 8051 source code can benefit from the redesigned core, which typically executes instructions 1.5 to 3 times faster than a traditional 8051 at the same clock speed. The 40-DIP format simplifies inspection, prototyping, and repair of through-hole boards. Before making a direct substitution, verify every pin function, reset behavior, oscillator network, interrupt vector, memory address, and peripheral dependency against the manufacturer documentation.

What is the W77L516A25DL?
The W77L516A25DL is an 8-bit W77 8051-compatible microcontroller from Nuvoton Technology Corporation operating at up to 25 MHz. According to the manufacturer datasheet, it provides 64 KB of flash program memory, 1 KB of RAM, 32 I/O pins, and a redesigned processor core. The component is supplied in a 40-DIP through-hole package, making it particularly relevant to established 8051-style embedded control systems.
What are the key specifications of W77L516A25DL that engineers should know?
The W77L516A25DL combines a 25 MHz maximum clock, 64 KB of flash memory, 1 KB of RAM, and 32 I/O pins in a 40-DIP package. According to the manufacturer datasheet, its redesigned processor executes instructions approximately 1.5 to 3 times faster than a traditional 8051 at the same crystal speed, depending on the instruction type. These characteristics make it suitable for embedded control, acquisition, and legacy-compatible industrial products.
How much program memory does W77L516A25DL have?
The W77L516A25DL contains 64 KB, or 64K x 8 bits, of flash program memory. According to the manufacturer datasheet, flash memory retains the programmed firmware when power is removed, allowing a controller to restart without a separate program-memory loader. Designers should still verify the code-size limits, memory-address map, and bootloader arrangement against the detailed register and memory documentation before finalizing firmware.
What is the RAM size of W77L516A25DL?
The W77L516A25DL includes 1 KB, or 1K x 8 bits, of internal RAM. According to the manufacturer datasheet, this memory supports variables, stack operations, and working data in the standard 8051 address space. The 1 KB figure should be considered when sizing buffers, communication frames, or task state, and external memory requirements should be confirmed against the device memory map.
How fast is the W77L516A25DL compared with a traditional 8051?
The W77L516A25DL is typically 1.5 to 3 times faster than a traditional 8051 at the same crystal speed, depending on the instruction type. According to the manufacturer datasheet, the redesigned core avoids wasted clock and memory cycles. Actual application throughput depends on the instruction mix, interrupt structure, memory access pattern, and peripheral timing, so representative firmware should be measured on the intended hardware.
What package does W77L516A25DL use?
The W77L516A25DL uses a 40-DIP through-hole package and provides 32 I/O pins. According to the manufacturer datasheet and product listings, this mechanical format supports conventional through-hole PCB assembly rather than surface-mount placement. Board designers should use the package drawing for hole locations, row spacing, and pin orientation, and should account for the larger board area compared with modern surface-mount microcontrollers.
Where can I find the W77L516A25DL pinout?
Use the pin-description and package-drawing sections of the W77L516A datasheet to assign PCB tracks. The W77L516A25DL is a 40-DIP device with 32 I/O pins, but several remaining package positions can carry power, ground, clock, reset, and dedicated control functions. Because individual pin names are not reproduced on this page, consult the manufacturer pin table before making connections or planning the schematic.
Where can I download the W77L516A25DL datasheet PDF?
The W77L516A25DL datasheet PDF can be accessed through the document linked on this product page. According to the manufacturer datasheet, the document describes the W77L516A 8051-compatible core, flash program memory, RAM, I/O resources, package, and electrical characteristics. Use the pin-description table, electrical limits, clock requirements, and application information when completing the hardware and firmware design.
Can W77L516A25DL be used for industrial control systems?
Yes, the W77L516A25DL is suitable for many industrial control, embedded I/O, and test-equipment applications. Its 25 MHz W77 8051-compatible core, 64 KB flash memory, 1 KB RAM, and 32 I/O pins provide a practical combination for supervisory logic and peripheral control. Industrial designs should still validate operating limits, isolation requirements, environmental conditions, and long-term component availability for the target system.
Is W77L516A25DL suitable for a legacy 8051 PCB replacement?
The W77L516A25DL can be considered for a legacy 8051 PCB when its package, pin functions, reset circuit, oscillator arrangement, memory map, and peripheral assignments match the original device. According to the manufacturer datasheet, the W77 core is instruction-cycle optimized, but that performance improvement does not by itself establish pin compatibility. Review the schematic and manufacturer pin table before replacing the incumbent MCU.
What is the best drop-in replacement for W77L516A25DL?
No drop-in replacement can be designated without checking the original schematic, 40-DIP pin map, clock configuration, memory interface, and peripheral functions. The W77L516A25DL is available in a 40-DIP package with 25 MHz operation, 64 KB flash, 1 KB RAM, and 32 I/O pins. Request a quote through the form on this page for the exact MPN, and validate any proposed substitute against the manufacturer pin descriptions before committing it to a redesign.
When should I choose W77L516A25DL over a smaller 8-bit MCU?
Choose the W77L516A25DL when an established 8051 software model, 32 I/O lines, 64 KB of flash program space, and a through-hole 40-DIP package are important design constraints. Its processor core is typically 1.5 to 3 times faster than a traditional 8051 at the same clock speed. Choose a smaller MCU instead when board area, power consumption, modern peripherals, or cost requirements outweigh compatibility benefits.
Is W77L516A25DL the same as W77L516A25?
W77L516A25DL identifies the complete orderable W77L516A configuration with a 25 MHz rating and 40-DIP package designation. The family base name W77L516A alone does not establish the same ordering code, temperature grade, or suffix-specific package. Compare the complete markings, package drawing, and electrical specifications rather than treating the shortened family name as a confirmed drop-in ordering equivalent.
What is the price of W77L516A25DL?
The current commercial terms for W77L516A25DL are handled through the Request a Quote form on this page. Submit the required quantity, target package quantity, and shipment destination to obtain current pricing, availability confirmation, and lead time. The structured pricing fields are intentionally left empty when a listing does not publish an explicit quantity-break table for this exact MPN.
Is W77L516A25DL in stock and what is its lead time?
Current stock and lead time for W77L516A25DL should be confirmed through the Request a Quote form on this page. Provide the quantity, reel or tube requirements, and destination so the order can be matched to the exact 40-DIP ordering code. Do not infer availability from an aggregator or from a different W77L516A package suffix, because separate suffixes and quantities can have different supply conditions.

Données de référence d'ingénierie pour W77L516A25DL — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the W77L516A25DL when a project benefits from 8051-compatible software, a 25 MHz redesigned core, 64 KB of flash, 1 KB of RAM, 32 I/O pins, and through-hole 40-DIP assembly. It is particularly attractive for industrial control, embedded instrumentation, data-acquisition control, and legacy 8051 modernization where established code and through-hole repairability matter. The processor is typically 1.5 to 3 times faster than a traditional 8051 at the same crystal speed, depending on instruction type. Choose a modern surface-mount MCU instead when minimum board area, lowest power consumption, advanced mixed-signal peripherals, or broad current availability are more important than compatibility. No alternative is designated as a drop-in substitute because the available cross-reference results do not establish a different MPN with the same 40-DIP pin assignments and required electrical behavior. Validate any proposed replacement against the manufacturer pin table, oscillator requirements, reset behavior, memory map, and peripheral multiplexing before modifying a PCB.

Notes de conception

Do not assume that W77L516A family naming guarantees an exact replacement. Compare the complete ordering code, 40-DIP outline, pin descriptions, oscillator circuit, reset requirements, memory map, interrupt sources, and peripheral multiplexing with the incumbent device. The redesigned core is instruction-cycle optimized, but performance improvements do not resolve a pin-function or timing mismatch. Prototype the candidate on the target board and verify startup, interrupts, port states, and external-memory behavior before production.

Place the oscillator network and decoupling capacitors close to the corresponding device pins, with the shortest practical return path to the ground reference. Because this is a 40-DIP through-hole device, preserve adequate clearance around the socket or package and route high-current or high-voltage nets away from the oscillator and reset area. Check the manufacturer package drawing for pin-one orientation and verify the PCB drill pattern against the physical W77L516A25DL rather than a generic DIP footprint.

Design the power rail to meet the device’s electrical limits and provide local bypass at the supply pins. Separate sensitive signal returns from relay, display, and power-conversion currents where possible, and use controlled power-up for attached peripherals if reset-state port behavior matters. Confirm the operating voltage, current consumption, and absolute maximum ratings in the manufacturer datasheet before selecting regulators, ferrites, or protection components.

At the maximum 25 MHz clock, route oscillator and reset nets away from high-current switching nodes and noisy digital outputs. Keep crystal or clock traces short, observe the manufacturer’s grounding guidance, and avoid long stub branches. For external bus or peripheral signals, account for capacitance, propagation delay, and any required bus-stretching behavior. Validate timing with the intended peripheral devices rather than relying only on nominal clock frequency.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Request the current manufacturer declaration or material-compliance documentation for the exact W77L516A25DL ordering code. Do not infer automotive qualification or environmental compliance from the family name.

Données vérifiées le : 2026-11-11 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

W77L516A25DL datasheet W77L516A25DL pinout W77L516A25DL datasheet pdf W77L516A25DL specifications W77L516A25DL 40-DIP footprint W77L516A25DL equivalent W77L516A25DL replacement W77L516A25DL price W77L516A25DL stock Nuvoton W77L516A25DL W77L516A25DL 25MHz MCU W77L516A25DL industrial controller

Composants & termes associés

Nuvoton Technology Corporation W77L516A25DL W77L516A 8051-compatible microcontroller 8-bit microcontroller W77 processor core embedded controller microcontroller integrated circuit semiconductor 25 MHz clock 64 KB flash program memory 1 KB RAM 32 I/O pins 40-DIP package DIP package family through-hole assembly industrial automation data acquisition test and measurement legacy 8051 flash memory instruction cycle clock oscillator
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ