W78E051B40PL - 8-Bit 40MHz 8051 MCU | Nuvoton
Référence : W78E051B40PL ✓ ActifW78E051B40PL Présentation
A microcontroller is a semiconductor integrated circuit that integrates a processor core, program memory, data memory, and I/O ports into one component. It executes embedded firmware to monitor inputs and control outputs. The W78 family belongs to the broader microcontroller hierarchy, combining an 8-bit processor core with embedded flash and general-purpose I/O for compact control systems.
The W78E051B40PL provides 4KB of flash program memory, 128 bytes of RAM, and 36 I/O pins. Its 40MHz maximum speed supports faster instruction execution than lower-speed members of the 8-bit MCU class. The 44-pin PLCC package provides 36 externally accessible I/O functions together with power and control connections, while its J-lead geometry supports through-hole PCB assembly.
The W78E051B40PL is identified as an 8-bit W78 microcontroller with 4KB flash and 128 bytes of data memory. This combination is suitable for firmware whose code footprint fits within 4KB and whose working data requirements remain within the available 128-byte RAM. Its 36 I/O pins also provide more external signal connections than many compact 8-bit controllers.
Typical uses include small industrial controllers, appliance interfaces, keyboard or panel controllers, embedded timers, simple sequencers, and compact motor or relay control systems. The 36 available I/O pins can connect sensors, indicators, switches and control logic, while the embedded flash supports self-contained firmware execution without an external program-memory device.
Designers should verify oscillator, reset, programming, and clock requirements against the manufacturer datasheet before layout. Because the device is supplied in a 44-pin J-lead PLCC package, PCB hole spacing and lead orientation must match the package drawing exactly. Firmware development should also account for the limited 4KB program-memory capacity and 128-byte RAM allocation.
This product page consolidates the W78E051B40PL architecture, memory organization, package details, pin-compatible family candidates, application guidance, and design considerations into one engineering-focused reference. It also distinguishes confirmed device characteristics from parameters that require direct confirmation in the manufacturer documentation before schematic or PCB release.
Alternatives de remplacement direct pour W78E051B40PL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec W78E051B40PL (même facteur de forme et même empreinte) — différant par Mounting Type, Package.
W78E051A40PL
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
W78E051B40PG
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
W78E051C40PL
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →W78E051D40PL
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
W78E051E40PL
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
W78E051B40PL Valeurs maximales et caractéristiques électriques
| Product Type | 8-bit microcontroller |
| Product Series | W78 series |
| Processor Architecture | 8051-compatible, 8-bit |
| Program Memory Type | Flash |
| Program Memory Size | 4KB (4K x 8 bits) |
| RAM Size | 128 x 8 bits (128 bytes) |
| Number of I/O | 36 ports |
| Maximum Clock Speed | 40MHz |
| Tension d'alimentation | 5V |
| Boîtier | 44-pin PLCC, J-lead |
| Type de montage | Through-hole |
Guide de configuration des broches du W78E051B40PL 44-pin plcc, j-lead
Configuration des broches du W78E051B40PL (boîtier 44-pin plcc, j-lead). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour W78E051B40PL.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
W78E051B40PL convient pour 6 applications: Appliance Control Panels, Small Industrial Sequencers, Keypad and Human Interface Controllers, Embedded Timer and Counter Modules, Compact Relay and Motor Control, Battery-Powered Portable Instruments.
Appliance Control Panels
The W78E051B40PL suits appliance panels that combine button inputs, LEDs, displays, and simple sequencing. Its 36 I/O ports give the designer room to connect multiple controls and indicators without an external I/O expander, while the 8051-compatible 8-bit architecture supports a compact control program. The 4KB flash budget is appropriate for short firmware routines and a dedicated state machine. At 40MHz, timing and debounce logic can be handled with greater execution headroom than on a slower 8-bit controller. Confirm display-driver requirements, clocking, and reset behavior in the manufacturer datasheet before finalizing the panel schematic.
Recommandé
Small Industrial Sequencers
For a compact production-line sequencer, the W78E051B40PL can manage discrete sensors, relays, and status indicators through its 36 I/O ports. The 8-bit CPU and 40MHz operating speed are suitable for deterministic step sequencing, debounce, timeout handling, and simple interlocks. Its 4KB flash memory limits application complexity, making it most appropriate when firmware is structured and compact rather than feature-rich. Designers should isolate field wiring appropriately and verify the device's electrical and environmental limits for the installation before releasing production hardware.
Recommandé
Keypad and Human Interface Controllers
The W78E051B40PL can serve as the controller for a matrix keypad, LED feedback, and a small display interface. With 36 I/O ports, the 8-bit device can support multiple scanned inputs and outputs while keeping external logic concentrated. Its 40MHz clock rate provides useful timing margin for debounce and display updates, and the 4KB flash capacity is workable for concise interface firmware. Confirm the required display communication method and pin multiplexing in the manufacturer documentation. The PLCC package also allows leaded assembly where a through-hole mechanical connection is preferred.
Recommandé
Embedded Timer and Counter Modules
The W78E051B40PL is appropriate for compact timer, counter, and event-logging modules because it combines a 40MHz 8-bit processor with 36 I/O ports. Timers can capture pulses, implement elapsed-time measurement, or drive scheduled outputs while the remaining I/O handles start, stop, reset, status, and alarm functions. Its 128-byte RAM is adequate for small working sets but should be monitored closely in applications that queue multiple events. Use the timer and oscillator details in the manufacturer datasheet to establish timing tolerance and avoid relying on an uncharacterized internal clock source.
Recommandé
Compact Relay and Motor Control
The W78E051B40PL can implement simple relay-control, step-command, or low-complexity motor-control logic where discrete outputs and status inputs are more important than advanced motion algorithms. The 36 I/O ports allow direct connection to drivers, limit sensors, and feedback switches, while the 40MHz processor supports interlock and debounce routines. The device is best suited to low-complexity control because program memory is limited to 4KB and RAM to 128 bytes. External protection, driver circuitry, and appropriate fault handling must be designed separately rather than assumed from the microcontroller specifications.
Recommandé
Battery-Powered Portable Instruments
The W78E051B40PL can serve as the control core of a compact portable instrument when the design requires modest local processing and several sensor connections. Its 8-bit architecture, 36 I/O ports, and 40MHz clock are adequate for low-rate measurement sequencing, threshold evaluation, and user-interface control. The 4KB flash and 128-byte RAM encourage efficient firmware design, while the 44-pin PLCC package supports leaded assembly in a compact enclosure. For battery operation, evaluate active current, sleep behavior, and analog front-end requirements directly in the manufacturer documentation because those operating details were not included in the product listing.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour W78E051B40PL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | W78E051A40PL | W78E051B40PG | W78E051C40PL |
|---|---|---|---|---|
| Brand | Nuvoton Technology Corporation | Nuvoton Technology Corporation | Nuvoton Technology Corporation | Nuvoton Technology Corporation |
| Package | 44-pin PLCC, J-lead | 44-pin PLCC, J-lead | 44-pin PLCC, J-lead | 44-pin PLCC, J-lead |
| Product Type | 8-bit microcontroller | 8-bit W78-family microcontroller | 8-bit W78-family microcontroller | 8-bit W78-family microcontroller |
| Maximum Speed | 40MHz | 40MHz | 40MHz | 40MHz |
Principaux différenciateurs
- High I/O availability in an 8-bit embedded controller (vs W78E051A40PL)
- Larger confirmed program-memory footprint (vs W78E051A40PL)
- Exact package match with same-family upgrade options (vs W78E051C40PL)
Notes de conception
Treat the 44-pin PLCC outline as a controlled mechanical interface. Confirm pin-1 orientation, lead pitch, body dimensions, and J-lead clearance from the manufacturer package drawing before creating the footprint. Allow adequate spacing for insertion and removal because the component is leaded rather than a leadless surface-mount package.
Plan the 5V supply rail and decoupling around the pin assignments and electrical limits in the manufacturer datasheet. Keep the supply return path short and place input and ground capacitors close to their associated device pins. Confirm startup, quiescent-current, and clock-source requirements before selecting the power architecture.
Do not assume that every W78E051 suffix is interchangeable. Firmware that fits 4KB of flash may exceed a candidate with less program memory, and alternate-family parts can differ in oscillator, reset, peripheral, and pin functions. Compare the complete pin table, electrical characteristics, memory map, and programming procedure before releasing a substitute.
Route oscillator and reset-related signals away from noisy switching nodes and keep critical traces short. For exposed I/O connected to switches, relays, or long wiring, use appropriate input conditioning and external protection. The controller should not be treated as a substitute for surge protection, current limiting, isolation, or relay-driver circuitry.
Informations de conformité
No explicit environmental, hazardous-substance, automotive-qualification, or conflict-minerals declarations were found for this exact MPN. Confirm the current manufacturer declaration and product-change notices before regulated production use.