XC4VLX15-10FF676C - Virtex-4 LX 13,824-Cell FPGA | AMD
Référence : XC4VLX15-10FF676C ✗ Fin de vieXC4VLX15-10FF676C Présentation
A field-programmable gate array, or FPGA, is a programmable semiconductor in which digital logic and interconnect are configured after fabrication. An FPGA belongs to the parallel programmable-logic hierarchy, where configurable logic blocks, programmable I/O, embedded resources, and memory are connected by routing fabric. This capability allows one physical device to implement different control, arithmetic, communications, or signal-processing functions through a configuration bitstream.
The XC4VLX15 combines 13,824 logic cells with 320 I/O, providing substantial parallelism for embedded control, industrial automation, communications, signal processing, and test equipment. Its 884,736-bit configuration memory stores the programmable logic definition and configuration data. The -10 speed grade supports higher clocking performance than slower members of the same Virtex-4 LX family while retaining the same 676-BBGA FCBGA mechanical format.
The XC4VLX15-10FF676C is a discrete, non-volatile FPGA whose configuration is loaded from an external source. Unlike mask-programmable logic devices, an FPGA can be reconfigured for multiple firmware images or board-level functional variations. Engineering reuse is therefore achieved through configuration bitstreams and tool-supported constraints rather than changing the physical IC. Designers must preserve the exact device identifier, package, speed grade, and supported configuration-memory requirements across the board design and production configuration.
Typical applications include industrial control systems, communications infrastructure, instrumentation, embedded video, aerospace-support equipment, and high-performance digital signal processing. The 320-I/O count is particularly useful when a design needs numerous differential or single-ended interfaces alongside substantial parallel processing. Compared with a smaller FPGA in the same family, the LX15 provides additional logic and I/O without moving to a larger package.
Place the XC4VL15-10FF676C on a multilayer PCB with a continuous ground plane, short point-of-load supply connections, and controlled-length routes for high-speed differential pairs. Follow the AMD package pinout and configuration guidance when assigning power, ground, configuration, clock, and user I/O pins. Verify thermal performance at the highest expected junction temperature because a 676-BBGA device can concentrate power dissipation beneath its central package area.
This page combines the exact catalog identifiers, package details, source links, design guidance, and carefully qualified drop-in alternatives to support faster engineering review. It also distinguishes genuine same-package drop-ins from similarly named devices that require a different package or design migration.
Alternatives de remplacement direct pour XC4VLX15-10FF676C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec XC4VLX15-10FF676C (même facteur de forme et même empreinte) — différant par Device Type, Package, Package Type, Programmable Logic, Speed Grade.
XC4VLX15-8FF676C
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC4VLX15-12FF676C
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC4VLX15-10FF676I
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC4VLX15-10FFG676C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC4VLX15-10FFG676I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC4VLX15-10FF676C Valeurs maximales et caractéristiques électriques
| Device Family | Virtex-4 LX |
| Device Type | Field Programmable Gate Array (FPGA) |
| Logic Cells | 13,824 cells |
| Configuration Memory | 884,736 bits |
| Input/Output Count | 320 I/O |
| Boîtier | 676-BBGA |
| Package Technology | FCBGA |
| Speed Grade | -10 |
| Device Suffix | C |
| Programmability | User-programmable FPGA |
| Type de montage | Surface Mount |
Guide de configuration des broches du XC4VLX15-10FF676C fcbga
Configuration des broches du XC4VLX15-10FF676C (boîtier fcbga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC4VLX15-10FF676C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC4VLX15-10FF676C convient pour 6 applications: Industrial Automation and Machine Control, Communications and Packet Processing, High-Speed Instrumentation, Digital Signal Processing, Aerospace and Defense Support Electronics, Embedded Video and Image Processing.
Industrial Automation and Machine Control
The XC4VLX15-10FF676C is well suited to industrial controllers that combine machine sequencing with multiple peripheral interfaces. Its 13,824 logic cells can implement motion sequencing, interlocks, state machines, diagnostics, and protocol engines in parallel, while 320 I/O provide substantial connectivity for encoders, discrete sensors, actuators, and communications. In this application, the FPGA sits between field-level I/O and the supervisory controller, reducing reliance on a processor for time-critical tasks. The -10 speed grade supports demanding clock domains, but timing closure, I/O standards, and the C environmental suffix must match the machine's operating requirements. The 676-BBGA FCBGA also requires careful PCB thermal and escape-routing design around its high pin count.
Recommandé
Communications and Packet Processing
The XC4VLX15-10FF676C can implement parallel communication functions where sustained logic throughput and numerous external connections are important. Its 13,824 logic cells can support framing, CRC generation, filtering, buffering, and protocol conversion, while 320 I/O can connect parallel or differential data interfaces. The -10 speed class is useful for clocked datapaths requiring more performance than slower Virtex-4 LX options. Designers should assign dedicated clock regions, constrain high-speed interfaces, and verify I/O timing for the selected package. Because configuration data must be loaded correctly, production programming and bitstream validation should be included in the hardware bring-up plan before the device is used in production communication equipment.
Recommandé
High-Speed Instrumentation
The XC4VLX15-10FF676C is applicable to measurement and test systems that acquire, filter, count, or transform multiple data channels. The FPGA's parallel architecture allows independent channels to be sampled, conditioned, and processed concurrently, and its 320 I/O provide extensive connectivity for sensors, trigger signals, counters, and data-capture devices. The -10 speed grade can support demanding clock rates, although actual channel rate remains constrained by I/O standards, timing closure, memory resources, and system architecture. Engineers should isolate analog inputs appropriately, use controlled-impedance routing for high-speed interfaces, and validate configuration repeatability. These practices make the device useful in programmable logic analyzers, automated test equipment, waveform processors, and laboratory acquisition systems.
Recommandé
Digital Signal Processing
The XC4VLX15-10FF676C can support parallel digital signal-processing pipelines in applications such as filtering, modulation, correlation, and digital waveform conversion. Its 13,824 logic cells provide configurable parallel arithmetic and control resources, while the -10 speed grade supports clocked datapaths that need moderate-to-high throughput. A practical design should map DSP operations onto the available Virtex-4 resources, check internal routing delays, and account for configuration memory use as the design grows. The 320-I/O device also allows the FPGA to interface directly with converters, memory, and parallel processing blocks, reducing external component count. Designers should preserve timing margins and verify post-route simulation results before treating the implementation as production-ready.
Recommandé
Aerospace and Defense Support Electronics
The XC4VLX15-10FF676C can serve as the programmable core in mission-support and test electronics where deterministic parallel logic is valuable. Its 13,824 logic cells can implement command decoding, telemetry processing, interface conversion, and built-in monitoring, while 320 I/O supports dense connectivity with converters and aerospace electronics modules. Selection for an aerospace program requires more than package compatibility: the environmental class, qualification evidence, radiation assumptions, configuration controls, and documentation must satisfy the system requirement. The -10 speed grade should be checked against clock and timing budgets, and the 676-BBGA footprint needs a multilayer PCB with robust power delivery. Program-control and configuration-data procedures should also be incorporated into the safety and verification plan.
Recommandé
Embedded Video and Image Processing
The XC4VLX15-10FF676C can be used in embedded image systems that combine parallel pixel processing with extensive board connectivity. Its programmable logic can perform pixel formatting, thresholding, region detection, color conversion, or interface timing, while 320 I/O provide numerous connections to image sensors, memory, and display-control components. The -10 speed grade is useful where clocked pixel pipelines must meet demanding throughput targets. The design should use vendor-supported memory and interface constraints, verify clock-domain crossings, and account for the routing cost of wide data paths. Because the package is a 676-BBGA FCBGA, high-density escape routing, via-in-pad construction, solder-assembly process control, and underside thermal performance are important for reliable implementation in compact embedded systems.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC4VLX15-10FF676C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC4VLX15-8FF676C | XC4VLX15-12FF676C | XC4VLX15-10FF676I | XC4VLX15-10FFG676C | XC4VLX15-10FFG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-BBGA (FCBGA) | 676-BBGA (FCBGA) - same | 676-BBGA (FCBGA) - same | 676-BBGA (FCBGA) - same | 676-BBGA (FCBGA) - same | 676-BBGA (FCBGA) - same |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells |
| Configuration Memory | 884,736 bits | 884,736 bits | 884,736 bits | 884,736 bits | 884,736 bits | 884,736 bits |
| Input/Output Count | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O |
| Speed Grade | -10 | -8 | -12 | -10 | -10 | -10 |
| Ordering Suffix | C | C | C | I | G C | G I |
Principaux différenciateurs
- Higher -10 speed class than the -8 family alternative (vs XC4VLX15-8FF676C)
- Lower speed designation than the -12 family alternative (vs XC4VLX15-12FF676C)
- Commercial-temperature ordering option relative to the I suffix (vs XC4VLX15-10FF676I)
- Directly documented catalog relationship (vs XC4VLX15-10FFG676C)
Notes de conception
Assign the 676-BBGA footprint from the AMD package documentation rather than a generic BGA library entry. Confirm every power, ground, configuration, clock, and user I/O ball against the exact device identifier. Use a multilayer board with a continuous ground plane, short power-plane connections, and symmetrical escape routing for the high-pin-count package.
Estimate worst-case junction temperature using the actual FPGA utilization, configured clock rate, core activity factor, package thermal data, board copper, and enclosure airflow. Do not assume that a large BGA footprint dissipates heat uniformly. Validate the final assembly because internal power density can create localized hot spots even when the board has generous exposed copper.
Apply AMD's recommended clock and I/O layout guidance before assigning high-speed pins. Keep sensitive configuration, clock, and differential interfaces away from noisy sources, use controlled-impedance routing where required, and verify external timing against the selected -10, -8, or -12 speed grade. Configuration pins must remain stable during startup and normal operation.
Do not treat a shared 676-BBGA package as proof of automatic interchangeability. Verify speed grade, temperature suffix, ordering code, supported I/O standards, configuration requirements, and bitstream compatibility. For legacy production builds, preserve the exact device identifier in BOMs and approved-vendor lists to prevent unintended substitution.
Informations de conformité
The device is an FPGA rather than an automotive-qualified component, so AEC-Q100 is not applicable. Specific environmental, material, and finish declarations require the applicable AMD product documentation or declaration of conformity.