XC4VLX15-10FF676C - Virtex-4 LX 13,824-Cell FPGA | AMD
MPN: XC4VLX15-10FF676C ✗ 停產XC4VLX15-10FF676C 概覽
A field-programmable gate array, or FPGA, is a programmable semiconductor in which digital logic and interconnect are configured after fabrication. An FPGA belongs to the parallel programmable-logic hierarchy, where configurable logic blocks, programmable I/O, embedded resources, and memory are connected by routing fabric. This capability allows one physical device to implement different control, arithmetic, communications, or signal-processing functions through a configuration bitstream.
The XC4VLX15 combines 13,824 logic cells with 320 I/O, providing substantial parallelism for embedded control, industrial automation, communications, signal processing, and test equipment. Its 884,736-bit configuration memory stores the programmable logic definition and configuration data. The -10 speed grade supports higher clocking performance than slower members of the same Virtex-4 LX family while retaining the same 676-BBGA FCBGA mechanical format.
The XC4VLX15-10FF676C is a discrete, non-volatile FPGA whose configuration is loaded from an external source. Unlike mask-programmable logic devices, an FPGA can be reconfigured for multiple firmware images or board-level functional variations. Engineering reuse is therefore achieved through configuration bitstreams and tool-supported constraints rather than changing the physical IC. Designers must preserve the exact device identifier, package, speed grade, and supported configuration-memory requirements across the board design and production configuration.
Typical applications include industrial control systems, communications infrastructure, instrumentation, embedded video, aerospace-support equipment, and high-performance digital signal processing. The 320-I/O count is particularly useful when a design needs numerous differential or single-ended interfaces alongside substantial parallel processing. Compared with a smaller FPGA in the same family, the LX15 provides additional logic and I/O without moving to a larger package.
Place the XC4VL15-10FF676C on a multilayer PCB with a continuous ground plane, short point-of-load supply connections, and controlled-length routes for high-speed differential pairs. Follow the AMD package pinout and configuration guidance when assigning power, ground, configuration, clock, and user I/O pins. Verify thermal performance at the highest expected junction temperature because a 676-BBGA device can concentrate power dissipation beneath its central package area.
This page combines the exact catalog identifiers, package details, source links, design guidance, and carefully qualified drop-in alternatives to support faster engineering review. It also distinguishes genuine same-package drop-ins from similarly named devices that require a different package or design migration.
直接替換替代品,適用於 XC4VLX15-10FF676C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC4VLX15-10FF676C (相同外形與佔位) — 差異在於 Device Type, Package, Package Type, Programmable Logic, Speed Grade.
XC4VLX15-8FF676C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC4VLX15-12FF676C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC4VLX15-10FF676I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC4VLX15-10FFG676C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VLX15-10FFG676I
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VLX15-10FF676C 最大額定值與電氣特性
| Device Family | Virtex-4 LX |
| Device Type | Field Programmable Gate Array (FPGA) |
| Logic Cells | 13,824 cells |
| Configuration Memory | 884,736 bits |
| Input/Output Count | 320 I/O |
| 封裝 | 676-BBGA |
| Package Technology | FCBGA |
| Speed Grade | -10 |
| Device Suffix | C |
| Programmability | User-programmable FPGA |
| 安裝類型 | Surface Mount |
XC4VLX15-10FF676C fcbga 腳位配置指南
XC4VLX15-10FF676C(fcbga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC4VLX15-10FF676C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC4VLX15-10FF676C 適用於 6 應用s: Industrial Automation and Machine Control, Communications and Packet Processing, High-Speed Instrumentation, Digital Signal Processing, Aerospace and Defense Support Electronics, Embedded Video and Image Processing.
Industrial Automation and Machine Control
The XC4VLX15-10FF676C is well suited to industrial controllers that combine machine sequencing with multiple peripheral interfaces. Its 13,824 logic cells can implement motion sequencing, interlocks, state machines, diagnostics, and protocol engines in parallel, while 320 I/O provide substantial connectivity for encoders, discrete sensors, actuators, and communications. In this application, the FPGA sits between field-level I/O and the supervisory controller, reducing reliance on a processor for time-critical tasks. The -10 speed grade supports demanding clock domains, but timing closure, I/O standards, and the C environmental suffix must match the machine's operating requirements. The 676-BBGA FCBGA also requires careful PCB thermal and escape-routing design around its high pin count.
推薦
Communications and Packet Processing
The XC4VLX15-10FF676C can implement parallel communication functions where sustained logic throughput and numerous external connections are important. Its 13,824 logic cells can support framing, CRC generation, filtering, buffering, and protocol conversion, while 320 I/O can connect parallel or differential data interfaces. The -10 speed class is useful for clocked datapaths requiring more performance than slower Virtex-4 LX options. Designers should assign dedicated clock regions, constrain high-speed interfaces, and verify I/O timing for the selected package. Because configuration data must be loaded correctly, production programming and bitstream validation should be included in the hardware bring-up plan before the device is used in production communication equipment.
推薦
High-Speed Instrumentation
The XC4VLX15-10FF676C is applicable to measurement and test systems that acquire, filter, count, or transform multiple data channels. The FPGA's parallel architecture allows independent channels to be sampled, conditioned, and processed concurrently, and its 320 I/O provide extensive connectivity for sensors, trigger signals, counters, and data-capture devices. The -10 speed grade can support demanding clock rates, although actual channel rate remains constrained by I/O standards, timing closure, memory resources, and system architecture. Engineers should isolate analog inputs appropriately, use controlled-impedance routing for high-speed interfaces, and validate configuration repeatability. These practices make the device useful in programmable logic analyzers, automated test equipment, waveform processors, and laboratory acquisition systems.
推薦
Digital Signal Processing
The XC4VLX15-10FF676C can support parallel digital signal-processing pipelines in applications such as filtering, modulation, correlation, and digital waveform conversion. Its 13,824 logic cells provide configurable parallel arithmetic and control resources, while the -10 speed grade supports clocked datapaths that need moderate-to-high throughput. A practical design should map DSP operations onto the available Virtex-4 resources, check internal routing delays, and account for configuration memory use as the design grows. The 320-I/O device also allows the FPGA to interface directly with converters, memory, and parallel processing blocks, reducing external component count. Designers should preserve timing margins and verify post-route simulation results before treating the implementation as production-ready.
推薦
Aerospace and Defense Support Electronics
The XC4VLX15-10FF676C can serve as the programmable core in mission-support and test electronics where deterministic parallel logic is valuable. Its 13,824 logic cells can implement command decoding, telemetry processing, interface conversion, and built-in monitoring, while 320 I/O supports dense connectivity with converters and aerospace electronics modules. Selection for an aerospace program requires more than package compatibility: the environmental class, qualification evidence, radiation assumptions, configuration controls, and documentation must satisfy the system requirement. The -10 speed grade should be checked against clock and timing budgets, and the 676-BBGA footprint needs a multilayer PCB with robust power delivery. Program-control and configuration-data procedures should also be incorporated into the safety and verification plan.
推薦
Embedded Video and Image Processing
The XC4VLX15-10FF676C can be used in embedded image systems that combine parallel pixel processing with extensive board connectivity. Its programmable logic can perform pixel formatting, thresholding, region detection, color conversion, or interface timing, while 320 I/O provide numerous connections to image sensors, memory, and display-control components. The -10 speed grade is useful where clocked pixel pipelines must meet demanding throughput targets. The design should use vendor-supported memory and interface constraints, verify clock-domain crossings, and account for the routing cost of wide data paths. Because the package is a 676-BBGA FCBGA, high-density escape routing, via-in-pad construction, solder-assembly process control, and underside thermal performance are important for reliable implementation in compact embedded systems.
推薦
推薦產品摘要
工程參考資料,適用於 XC4VLX15-10FF676C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC4VLX15-8FF676C | XC4VLX15-12FF676C | XC4VLX15-10FF676I | XC4VLX15-10FFG676C | XC4VLX15-10FFG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-BBGA (FCBGA) | 676-BBGA (FCBGA) - same | 676-BBGA (FCBGA) - same | 676-BBGA (FCBGA) - same | 676-BBGA (FCBGA) - same | 676-BBGA (FCBGA) - same |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells |
| Configuration Memory | 884,736 bits | 884,736 bits | 884,736 bits | 884,736 bits | 884,736 bits | 884,736 bits |
| Input/Output Count | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O | 320 I/O |
| Speed Grade | -10 | -8 | -12 | -10 | -10 | -10 |
| Ordering Suffix | C | C | C | I | G C | G I |
主要差異化特點
- Higher -10 speed class than the -8 family alternative (對比XC4VLX15-8FF676C)
- Lower speed designation than the -12 family alternative (對比XC4VLX15-12FF676C)
- Commercial-temperature ordering option relative to the I suffix (對比XC4VLX15-10FF676I)
- Directly documented catalog relationship (對比XC4VLX15-10FFG676C)
設計說明
Assign the 676-BBGA footprint from the AMD package documentation rather than a generic BGA library entry. Confirm every power, ground, configuration, clock, and user I/O ball against the exact device identifier. Use a multilayer board with a continuous ground plane, short power-plane connections, and symmetrical escape routing for the high-pin-count package.
Estimate worst-case junction temperature using the actual FPGA utilization, configured clock rate, core activity factor, package thermal data, board copper, and enclosure airflow. Do not assume that a large BGA footprint dissipates heat uniformly. Validate the final assembly because internal power density can create localized hot spots even when the board has generous exposed copper.
Apply AMD's recommended clock and I/O layout guidance before assigning high-speed pins. Keep sensitive configuration, clock, and differential interfaces away from noisy sources, use controlled-impedance routing where required, and verify external timing against the selected -10, -8, or -12 speed grade. Configuration pins must remain stable during startup and normal operation.
Do not treat a shared 676-BBGA package as proof of automatic interchangeability. Verify speed grade, temperature suffix, ordering code, supported I/O standards, configuration requirements, and bitstream compatibility. For legacy production builds, preserve the exact device identifier in BOMs and approved-vendor lists to prevent unintended substitution.
合規資訊
The device is an FPGA rather than an automotive-qualified component, so AEC-Q100 is not applicable. Specific environmental, material, and finish declarations require the applicable AMD product documentation or declaration of conformity.