XC4VLX40-11FF1148I - 41,472-Cell Virtex-4 LX FPGA | AMD
Référence : XC4VLX40-11FF1148I ✗ Fin de vieXC4VLX40-11FF1148I Présentation
An FPGA is a programmable semiconductor whose internal circuit configuration is stored after manufacture. Within the semiconductor hierarchy, an FPGA sits above programmable logic devices and provides parallel hardware implementation through configurable logic blocks, block RAM, digital signal processing resources, programmable input/output blocks, and high-speed serial transceivers. This makes an FPGA suitable when fixed-function logic would require repeated board revisions or when several parallel processing paths must operate at high throughput.
Key characteristics of the XC4VLX40 include 41,472 logic cells, 4,608 configurable logic blocks, a 1,028 MHz internal frequency, and a 1,148-pin FCBGA package. The 90 nm CMOS process and 1.2 V supply place it in the Virtex-4 LX generation. The large logic capacity supports demanding datapaths, protocol bridges, network interfaces, embedded processing, and control systems requiring substantially more parallelism than a conventional microcontroller provides.
The -11 speed designation identifies the device's performance grade within the Virtex-4 family, while the FF1148 suffix identifies its 1,148-pin FCBGA configuration. The I suffix distinguishes this ordering variant from other temperature-grade versions. Published package information identifies the component as a CMOS FPGA with 640 I/O and an operating temperature range of 0 °C to 85 °C. Designers should verify timing, power, configuration, and thermal requirements against the applicable AMD documentation before releasing a production design.
Typical applications include high-speed network packet processing, industrial control and automation, telecommunications interface conversion, test and measurement systems, embedded signal processing, and aerospace or defense equipment. Its 41,472-cell fabric is especially useful for parallel algorithms, wide data aggregation, multiport control, and high-speed serial connectivity. A system requiring deterministic hardware parallelism can implement critical functions directly in FPGA logic rather than sharing a processor across many concurrent tasks.
Board design requires careful attention to power integrity, decoupling, clocking, controlled-impedance routing, and thermal management around the large FCBGA. The FPGA package pinout files should be used during symbol creation and PCB layout, while the device configuration interface must be designed for reliable loading and recovery. Differential and high-speed interfaces also require length matching and controlled-impedance routing derived from the board stack-up.
This product record combines package, logic-capacity, speed, and connectivity information with engineering guidance for FPGA selection, footprint verification, and implementation. It also identifies confirmed same-package Virtex-4 alternatives and distinguishes their ordering differences so engineers can narrow replacement candidates without overlooking qualification, programming, or temperature-grade requirements.
Alternatives de remplacement direct pour XC4VLX40-11FF1148I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
XC4VLX40-11FF1148C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC4VLX40-11FFG1148I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC4VLX40-11FFG1148C
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC4VLX40-11FF1148IS2
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
XC4VLX40-11FF1148I Valeurs maximales et caractéristiques électriques
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Cells | 41,472 cells |
| Configurable Logic Blocks | 4,608 CLBs |
| Internal Frequency | 1,028 MHz |
| Logic Family | CMOS |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| I/O Count | 640 I/O |
| Package Type | 1,148-pin FCBGA |
| Total Package Pins | 1,148 pins |
| Température de fonctionnement | 0 °C to 85 °C |
| Speed Grade | -11 |
| Block RAM | 216 kbit |
| Type de mémoire | Block RAM |
| Architecture | Virtex-4 LX |
| Type de montage | Surface-mount BGA |
Guide de configuration des broches du XC4VLX40-11FF1148I 1,148 pins
Configuration des broches du XC4VLX40-11FF1148I (boîtier 1,148 pins). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC4VLX40-11FF1148I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC4VLX40-11FF1148I convient pour 6 applications: High-Speed Network Packet Processing, Industrial Control and Automation, Telecommunications Interface Conversion, Test and Measurement Instrumentation, Embedded Signal Processing, Aerospace and Defense Control Systems.
High-Speed Network Packet Processing
The XC4VLX40-11FF1148I fits network equipment that must classify, filter, buffer, and route packets concurrently. Its 41,472 logic cells and 4,608 configurable logic blocks allow independent pipelines to operate in parallel, while 640 I/O support wide parallel interfaces to external memory, PHY devices, and network processors. The 1,028 MHz internal frequency supports demanding control logic, although actual interface throughput depends on I/O standards, board-level timing, and selected transceiver performance.
Recommandé
Industrial Control and Automation
The XC4VLX40-11FF1148I is suitable for industrial controllers requiring deterministic parallel logic across many sensors, actuators, motion channels, and safety interlocks. A 41,472-cell fabric can implement multiple acquisition and control pipelines concurrently, while 640 I/O provide extensive board-level connectivity. The published 0 °C to 85 °C operating range must satisfy the target enclosure environment, and production designs should verify industrial qualification, isolation requirements, and long-term supply conditions.
Recommandé
Telecommunications Interface Conversion
The XC4VLX40-11FF1148I can bridge dissimilar telecommunications interfaces by terminating parallel and high-speed serial traffic and performing framing, mapping, and protocol conversion in programmable logic. Its 41,472 logic cells and 4,608 configurable logic blocks support multiple channels, while the 1,148-pin FCBGA exposes 640 I/O for backplane, line-card, and transceiver connectivity. Clock-jitter control, impedance accuracy, and power sequencing remain critical system-level requirements.
Recommandé
Test and Measurement Instrumentation
The XC4VLX40-11FF1148I fits instruments that combine wide parallel acquisition, real-time pattern generation, timing analysis, and signal processing. Its large programmable fabric can execute multiple data paths simultaneously, and the 640 I/O provide flexibility for triggering, synchronization, and instrument-control buses. Designers should budget carefully for external memory interfaces, controlled-impedance routing, clock jitter, and thermal dissipation because the 1,148-pin FCBGA package concentrates a large pin and power count on a single device.
Recommandé
Embedded Signal Processing
The XC4VLX40-11FF1148I is appropriate for fixed-point filtering, correlation, modulation, spectral analysis, and other parallel signal-processing workloads. Its 4,608 configurable logic blocks and 41,472 logic cells allow filters and arithmetic pipelines to run concurrently instead of serializing operations on a general-purpose processor. The 1,028 MHz internal frequency provides a useful performance reference, but end-to-end sample rate is governed by I/O timing, memory bandwidth, clocking, and the selected arithmetic and block-RAM resources.
Recommandé
Aerospace and Defense Control Systems
The XC4VLX40-11FF1148I can support embedded control, telemetry, signal conditioning, and data-recording systems where parallel hardware execution provides predictable throughput. Its 41,472 logic cells and 640 I/O allow multiple channels and interfaces to be managed concurrently, while the 1,148-pin FCBGA supports dense board-level integration. Qualification, radiation, shock, vibration, temperature, and long-term procurement requirements must be assessed separately; the available ordering information does not establish AEC-Q100 qualification.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC4VLX40-11FF1148I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC4VLX40-11FF1148C | XC4VLX40-11FFG1148I | XC4VLX40-11FFG1148C | XC4VLX40-11FF1148IS2 |
|---|---|---|---|---|---|
| Brand | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices | Advanced Micro Devices |
| Package | 1,148-pin FCBGA | 1,148-pin FCBGA | 1,148-pin FCBGA | 1,148-pin FCBGA | 1,148-pin FCBGA |
| Logic Family | CMOS | CMOS | CMOS | CMOS | CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.14 V to 1.26 V |
Principaux différenciateurs
- Large logic capacity for parallel implementations (vs XC4VLX40-11FF1148C)
- Confirmed high internal operating frequency (vs XC4VLX40-11FF1148IS2)
- Same-package sourcing path without changing the PCB footprint (vs XC4VLX40-11FFG1148I)
Notes de conception
Start the PCB layout from the official AMD Virtex-4 package-device pinout file rather than a generic 1,148-ball symbol. The ball assignment includes configuration pins, dedicated power and ground balls, and banks that may support different I/O standards. Verify each ball against the selected device suffix and confirm that exposed thermal or power balls are connected according to the package documentation.
Partition the 1.2 V core supply from the applicable I/O supplies and follow the AMD power-source requirements for every voltage rail. Place decoupling capacitors directly at the associated package balls with short ground paths, and verify startup sequencing, allowable voltage tolerance, and simultaneous switching current. A 1,148-pin FCBGA can require substantial low-impedance distribution to prevent dynamic voltage droop during high-activity logic operation.
Use the actual board stack-up to calculate controlled-impedance routing for clocks and high-speed interfaces. Maintain continuous reference planes, minimize stubs and unnecessary vias, and match differential-pair geometry and length where the interface specification requires it. Treat the listed 1,028 MHz internal frequency as a device characteristic rather than a guaranteed I/O rate; external interface performance also depends on I/O standards, clock quality, transceiver characteristics, and board loss.
Do not assume that identical FCBGA packages make ordering variants automatically interchangeable. For XC4VLX40-11FF1148I and the listed candidates, check the speed-grade suffix, temperature grade, qualification, device identification, bitstream support, and orderable package code. A replacement should also be checked for configuration, power-up, and thermal differences before it is approved for an existing PCB.
Informations de conformité
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN. Verify compliance and qualification using the applicable AMD product documentation or supplier declaration before production release.