Advanced Micro Devices, Inc.

XC4VLX40-11FF1148I - 41,472-Cell Virtex-4 LX FPGA | AMD

料号: XC4VLX40-11FF1148I ✗ 停产
1.2 V Vdss 1,148-pin FCBGA Package 1,028 MHz Speed Block RAM Memory
最小起订量: 1 |

XC4VLX40-11FF1148I 概述

Advanced Micro Devices XC4VLX40-11FF1148I is a Virtex-4 LX field-programmable gate array with 41,472 logic cells, 4,608 configurable logic blocks, and a maximum internal frequency of 1,028 MHz. The device is manufactured on 90 nm CMOS technology, operates from a 1.2 V core supply, and is packaged in a 1,148-pin FCBGA. Its architecture combines programmable logic, dedicated hardware resources, and high-speed connectivity for logic-intensive embedded systems.

An FPGA is a programmable semiconductor whose internal circuit configuration is stored after manufacture. Within the semiconductor hierarchy, an FPGA sits above programmable logic devices and provides parallel hardware implementation through configurable logic blocks, block RAM, digital signal processing resources, programmable input/output blocks, and high-speed serial transceivers. This makes an FPGA suitable when fixed-function logic would require repeated board revisions or when several parallel processing paths must operate at high throughput.

Key characteristics of the XC4VLX40 include 41,472 logic cells, 4,608 configurable logic blocks, a 1,028 MHz internal frequency, and a 1,148-pin FCBGA package. The 90 nm CMOS process and 1.2 V supply place it in the Virtex-4 LX generation. The large logic capacity supports demanding datapaths, protocol bridges, network interfaces, embedded processing, and control systems requiring substantially more parallelism than a conventional microcontroller provides.

The -11 speed designation identifies the device's performance grade within the Virtex-4 family, while the FF1148 suffix identifies its 1,148-pin FCBGA configuration. The I suffix distinguishes this ordering variant from other temperature-grade versions. Published package information identifies the component as a CMOS FPGA with 640 I/O and an operating temperature range of 0 °C to 85 °C. Designers should verify timing, power, configuration, and thermal requirements against the applicable AMD documentation before releasing a production design.

Typical applications include high-speed network packet processing, industrial control and automation, telecommunications interface conversion, test and measurement systems, embedded signal processing, and aerospace or defense equipment. Its 41,472-cell fabric is especially useful for parallel algorithms, wide data aggregation, multiport control, and high-speed serial connectivity. A system requiring deterministic hardware parallelism can implement critical functions directly in FPGA logic rather than sharing a processor across many concurrent tasks.

Board design requires careful attention to power integrity, decoupling, clocking, controlled-impedance routing, and thermal management around the large FCBGA. The FPGA package pinout files should be used during symbol creation and PCB layout, while the device configuration interface must be designed for reliable loading and recovery. Differential and high-speed interfaces also require length matching and controlled-impedance routing derived from the board stack-up.

This product record combines package, logic-capacity, speed, and connectivity information with engineering guidance for FPGA selection, footprint verification, and implementation. It also identifies confirmed same-package Virtex-4 alternatives and distinguishes their ordering differences so engineers can narrow replacement candidates without overlooking qualification, programming, or temperature-grade requirements.

直接替换替代料: XC4VLX40-11FF1148I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

XC4VLX40-11FF1148C

✅ 直接替换
📦 1,148-pin FCBGA
Same Virtex-4 LX architecture, -11 speed grade, 41,472 logic cells, and 1,148-pin FCBGA; ordering suffix differs from the I variant

📋 参考替代料(不在目录中)

XC4VLX40-11FFG1148I

✅ 直接替换
📦 1,148-pin FCBGA
Same Virtex-4 LX device with 4,608 CLBs, 41,472 logic cells, and 1,028 MHz internal frequency; G ordering suffix differs

📋 参考替代料(不在目录中)

XC4VLX40-11FFG1148C

✅ 直接替换
📦 1,148-pin FCBGA
Same Virtex-4 LX architecture and 1,148-pin FCBGA with 4,608 CLBs and 41,472 logic cells; both ordering suffixes differ

📋 参考替代料(不在目录中)

XC4VLX40-11FF1148IS2

✅ 直接替换
📦 1,148-pin FCBGA
Same XC4VLX40 device family and 1,148-pin package; the listing specifies 4,608 CLBs and a 1.14 V to 1.26 V supply range, with a different S2 ordering suffix

📋 参考替代料(不在目录中)

XC4VLX40-11FF1148I 最大额定值与电气特性

Device Type Virtex-4 LX field-programmable gate array
Logic Cells 41,472 cells
Configurable Logic Blocks 4,608 CLBs
Internal Frequency 1,028 MHz
Logic Family CMOS
Process Technology 90 nm
Core Supply Voltage 1.2 V
I/O Count 640 I/O
Package Type 1,148-pin FCBGA
Total Package Pins 1,148 pins
工作温度 0 °C to 85 °C
Speed Grade -11
Block RAM 216 kbit
存储器类型 Block RAM
Architecture Virtex-4 LX
安装类型 Surface-mount BGA

XC4VLX40-11FF1148I 1,148 pins 引脚配置指南

XC4VLX40-11FF1148I(1,148 pins 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XC4VLX40-11FF1148I 的 1,148 pins 封装引脚图

暂无详细引脚数据: XC4VLX40-11FF1148I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XC4VLX40-11FF1148I 适用于 6 应用s: High-Speed Network Packet Processing, Industrial Control and Automation, Telecommunications Interface Conversion, Test and Measurement Instrumentation, Embedded Signal Processing, Aerospace and Defense Control Systems.

🌐

High-Speed Network Packet Processing

The XC4VLX40-11FF1148I fits network equipment that must classify, filter, buffer, and route packets concurrently. Its 41,472 logic cells and 4,608 configurable logic blocks allow independent pipelines to operate in parallel, while 640 I/O support wide parallel interfaces to external memory, PHY devices, and network processors. The 1,028 MHz internal frequency supports demanding control logic, although actual interface throughput depends on I/O standards, board-level timing, and selected transceiver performance.

🏭

Industrial Control and Automation

The XC4VLX40-11FF1148I is suitable for industrial controllers requiring deterministic parallel logic across many sensors, actuators, motion channels, and safety interlocks. A 41,472-cell fabric can implement multiple acquisition and control pipelines concurrently, while 640 I/O provide extensive board-level connectivity. The published 0 °C to 85 °C operating range must satisfy the target enclosure environment, and production designs should verify industrial qualification, isolation requirements, and long-term supply conditions.

🌐

Telecommunications Interface Conversion

The XC4VLX40-11FF1148I can bridge dissimilar telecommunications interfaces by terminating parallel and high-speed serial traffic and performing framing, mapping, and protocol conversion in programmable logic. Its 41,472 logic cells and 4,608 configurable logic blocks support multiple channels, while the 1,148-pin FCBGA exposes 640 I/O for backplane, line-card, and transceiver connectivity. Clock-jitter control, impedance accuracy, and power sequencing remain critical system-level requirements.

🔧

Test and Measurement Instrumentation

The XC4VLX40-11FF1148I fits instruments that combine wide parallel acquisition, real-time pattern generation, timing analysis, and signal processing. Its large programmable fabric can execute multiple data paths simultaneously, and the 640 I/O provide flexibility for triggering, synchronization, and instrument-control buses. Designers should budget carefully for external memory interfaces, controlled-impedance routing, clock jitter, and thermal dissipation because the 1,148-pin FCBGA package concentrates a large pin and power count on a single device.

📡

Embedded Signal Processing

The XC4VLX40-11FF1148I is appropriate for fixed-point filtering, correlation, modulation, spectral analysis, and other parallel signal-processing workloads. Its 4,608 configurable logic blocks and 41,472 logic cells allow filters and arithmetic pipelines to run concurrently instead of serializing operations on a general-purpose processor. The 1,028 MHz internal frequency provides a useful performance reference, but end-to-end sample rate is governed by I/O timing, memory bandwidth, clocking, and the selected arithmetic and block-RAM resources.

✈️

Aerospace and Defense Control Systems

The XC4VLX40-11FF1148I can support embedded control, telemetry, signal conditioning, and data-recording systems where parallel hardware execution provides predictable throughput. Its 41,472 logic cells and 640 I/O allow multiple channels and interfaces to be managed concurrently, while the 1,148-pin FCBGA supports dense board-level integration. Qualification, radiation, shock, vibration, temperature, and long-term procurement requirements must be assessed separately; the available ordering information does not establish AEC-Q100 qualification.

推荐产品汇总

XC4VLX40-11FF1148C Same-family Virtex-4 LX device for design review 用于: High-Speed Network Packet Processing, Telecommunications Interface Conversion, Embedded Signal Processing XC4VLX40-11FFG1148I Same-package Virtex-4 LX configuration alternative 用于: High-Speed Network Packet Processing, Telecommunications Interface Conversion, Embedded Signal Processing XC4VLX40-11FFG1148C Same-family alternative for an alternate ordering code 用于: Industrial Control and Automation, Test and Measurement Instrumentation, Aerospace and Defense Control Systems XC4VLX40-11FF1148IS2 Same-package Virtex-4 LX configuration option 用于: Industrial Control and Automation, Test and Measurement Instrumentation, Aerospace and Defense Control Systems
What are the key specifications of XC4VLX40-11FF1148I that engineers should know?
The XC4VLX40-11FF1148I is a 90 nm CMOS Virtex-4 LX FPGA with 41,472 logic cells, 4,608 configurable logic blocks, a 1,028 MHz internal frequency, and a 1.2 V core supply. It uses a 1,148-pin FCBGA and provides 640 I/O. According to AMD and distributor product information, the device also includes 216 kbit of block RAM and is identified by the -11 speed grade.
Where can I download the XC4VLX40-11FF1148I datasheet and package pinout?
The official AMD Virtex-4 package-device pinout page is the primary source for assigning all 1,148 package pins. The device datasheet can also be located through the Octopart datasheet result for XC4VLX40-11FF1148I. For PCB implementation, use the AMD ASCII package files rather than reconstructing pin assignments from a distributor thumbnail, because the FCBGA contains power, ground, configuration, and high-speed I/O balls.
What is the XC4VLX40-11FF1148I used for?
The XC4VLX40-11FF1148I is used for parallel, high-throughput FPGA designs where 41,472 logic cells and 4,608 configurable logic blocks provide substantial hardware capacity. Typical uses include network packet processing, telecommunications interfaces, industrial automation, test equipment, embedded signal processing, and aerospace or defense control systems. Its 1,028 MHz internal frequency and 640 I/O also support wide datapaths and multiple external interfaces.
Is XC4VLX40-11FF1148I suitable for industrial control and automation?
The XC4VLX40-11FF1148I can be suitable for industrial control systems when its electrical, timing, and environmental requirements satisfy the finished equipment. Published specifications identify a 0 °C to 85 °C operating range, 1.2 V core supply, 90 nm CMOS process, and 41,472 logic cells. Confirm qualification requirements, extended-temperature needs, and the applicable ordering code before treating it as a universal industrial replacement.
What is the difference between XC4VLX40-11FF1148I and XC4VLX40-11FF1148C?
The XC4VLX40-11FF1148I and XC4VLX40-11FF1148C share the Virtex-4 LX device, -11 speed grade, 1,148-pin FCBGA footprint, 41,472 logic cells, and 4,608 configurable logic blocks. Their ordering suffixes identify different device variants, but the comparison information does not define the exact temperature-grade distinction. Confirm the full ordering code and temperature requirements in AMD documentation before substituting one for the other.
Can XC4VLX40-11FFG1148I replace XC4VLX40-11FF1148I?
The XC4VLX40-11FFG1148I is a same-package Virtex-4 LX candidate for replacement review because it is identified with the same 4,608 CLBs, 41,472 logic cells, and 1,148-pin FCBGA construction. Its ordering suffix differs from XC4VLX40-11FF1148I, so the final decision must include a review of speed grade, temperature grade, qualification, ordering information, and device configuration. It should not be treated as an automatic substitute without that check.
What can replace XC4VLX40-11FF1148I on the same PCB footprint?
The confirmed same-package candidates are XC4VLX40-11FF1148C, XC4VLX40-11FFG1148I, XC4VLX40-11FFG1148C, and XC4VLX40-11FF1148IS2. Each is associated with the 1,148-pin FCBGA and Virtex-4 LX platform, but each requires validation of suffix, temperature grade, speed grade, qualification, and purchasing status. PCB fit alone does not establish functional or lifecycle equivalence.
Is there a cross-brand drop-in equivalent for XC4VLX40-11FF1148I?
No cross-brand drop-in equivalent is confirmed for the XC4VLX40-11FF1148I. The verified search results identify same-family AMD or Xilinx Virtex-4 LX variants in the 1,148-pin FCBGA, but they do not identify a competing manufacturer offering the same 1,148-ball footprint and device resources. A cross-brand replacement should not be assumed because it would require FPGA bitstream, configuration, power, pinout, and design-tool compatibility beyond package matching.
When should I choose XC4VLX40-11FF1148I over XC4VLX40-11FFG1148I?
Choose the XC4VLX40-11FF1148I when its established ordering code, temperature range, qualification status, and device documentation fit the system requirements. Consider XC4VLX40-11FFG1148I when its ordering suffix corresponds to the required grade and it provides better supply continuity. Both use the same Virtex-4 LX architecture and 1,148-pin FCBGA, so the deciding factors are ordering, lifecycle, qualification, and purchasing requirements rather than footprint.
How should power and decoupling be designed for XC4VLX40-11FF1148I?
Design the XC4VLX40-11FF1148I around its 1.2 V core supply and the separate supply requirements of its I/O banks. Place the required input and output capacitors at their specified package pins, minimize loop area, and use a low-impedance power distribution network. The AMD datasheet and package documentation should control capacitor selection, allowable voltage tolerance, power sequencing, and whether additional filtering is required.
What PCB layout practices matter for the XC4VLX40-11FF1148I FCBGA?
The XC4VLX40-11FF1148I requires a layout derived from the official 1,148-ball package file, including all power, ground, configuration, and high-speed pins. Use the board stack-up to calculate controlled-impedance traces, provide symmetric power distribution, minimize via stubs, and route high-speed differential pairs with matched length and continuous reference planes. Validate the escape routing and ball assignment before fabrication because a single FCBGA assignment error can affect boot, testing, or system operation.
How do I design the clock and high-speed interfaces for XC4VLX40-11FF1148I?
Use a low-jitter clock source and route clock networks according to the AMD design guidance for the selected Virtex-4 speed grade. High-speed serial or parallel interfaces should use controlled-impedance routing with matched differential pairs, adequate return paths, and any specified AC coupling or calibration components. Timing closure must be based on the actual external transceiver, board loss, connector, and clock rather than on the 1,028 MHz internal frequency alone.
Where can I buy XC4VLX40-11FF1148I and check its price and lead time?
Use the Request a Quote form on this page to request the current XC4VLX40-11FF1148I price, stock status, lead time, and minimum order quantity. The listing identifies authorized distributor availability, but inventory and commercial terms can change for this mature FPGA. Specify the exact MPN, quantity, tray or other delivery format, and any required traceability documentation when requesting the quotation.
What is the lead time and stock status of XC4VLX40-11FF1148I?
The current stock and lead time for XC4VLX40-11FF1148I should be obtained through the Request a Quote form on this page. Because Virtex-4 devices are mature products, availability may depend on original inventory, authorized-channel supply, and exact ordering suffixes. Confirm the date code, package condition, lead time, and whether the shipment is new factory stock before committing the device to a production schedule.
What programming tools and configuration considerations apply to XC4VLX40-11FF1148I?
The XC4VLX40-11FF1148I is a legacy Virtex-4 LX device, so engineers should use an AMD or Xilinx toolchain and device support package that explicitly recognizes the exact ordering code. The design flow must include constraint definition, timing analysis, bitstream generation, and configuration-interface validation. Confirm host-computer compatibility and simulator-library availability before release because older FPGA families may not be supported by the newest software-only workflows.

工程参考数据: XC4VLX40-11FF1148I ——对比、设计指导和合规信息。

选型指南

Select the XC4VLX40-11FF1148I when an existing Virtex-4 LX design depends on its established ordering code, 41,472 logic cells, 4,608 configurable logic blocks, 1,028 MHz internal frequency, and 1,148-pin FCBGA footprint. Consider XC4VLX40-11FF1148C when the manufacturer documentation confirms that the C-suffix grade satisfies the temperature, qualification, and sourcing requirements. Evaluate XC4VLX40-11FFG1148I and XC4VLX40-11FFG1148C only after reviewing the meaning of the G suffix and the complete ordering information. XC4VLX40-11FF1148IS2 may suit a design that can use its listed 1,205 MHz internal frequency and 1.14 V to 1.26 V supply range, but its S2 suffix requires formal review. No verified cross-brand part establishes the same package and device resources, so changing manufacturers would require redesign and toolchain validation rather than a simple drop-in substitution.

与替代料对比

参数 本产品 XC4VLX40-11FF1148C XC4VLX40-11FFG1148I XC4VLX40-11FFG1148C XC4VLX40-11FF1148IS2
Brand Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices Advanced Micro Devices
Package 1,148-pin FCBGA 1,148-pin FCBGA 1,148-pin FCBGA 1,148-pin FCBGA 1,148-pin FCBGA
Logic Family CMOS CMOS CMOS CMOS CMOS
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.14 V to 1.26 V

关键差异点

  • Large logic capacity for parallel implementations (对比 XC4VLX40-11FF1148C)
  • Confirmed high internal operating frequency (对比 XC4VLX40-11FF1148IS2)
  • Same-package sourcing path without changing the PCB footprint (对比 XC4VLX40-11FFG1148I)

设计说明

Start the PCB layout from the official AMD Virtex-4 package-device pinout file rather than a generic 1,148-ball symbol. The ball assignment includes configuration pins, dedicated power and ground balls, and banks that may support different I/O standards. Verify each ball against the selected device suffix and confirm that exposed thermal or power balls are connected according to the package documentation.

Partition the 1.2 V core supply from the applicable I/O supplies and follow the AMD power-source requirements for every voltage rail. Place decoupling capacitors directly at the associated package balls with short ground paths, and verify startup sequencing, allowable voltage tolerance, and simultaneous switching current. A 1,148-pin FCBGA can require substantial low-impedance distribution to prevent dynamic voltage droop during high-activity logic operation.

Use the actual board stack-up to calculate controlled-impedance routing for clocks and high-speed interfaces. Maintain continuous reference planes, minimize stubs and unnecessary vias, and match differential-pair geometry and length where the interface specification requires it. Treat the listed 1,028 MHz internal frequency as a device characteristic rather than a guaranteed I/O rate; external interface performance also depends on I/O standards, clock quality, transceiver characteristics, and board loss.

Do not assume that identical FCBGA packages make ordering variants automatically interchangeable. For XC4VLX40-11FF1148I and the listed candidates, check the speed-grade suffix, temperature grade, qualification, device identification, bitstream support, and orderable package code. A replacement should also be checked for configuration, power-up, and thermal differences before it is approved for an existing PCB.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN. Verify compliance and qualification using the applicable AMD product documentation or supplier declaration before production release.

相关搜索

XC4VLX40-11FF1148I datasheet XC4VLX40-11FF1148I pinout XC4VLX40-11FF1148I specifications XC4VLX40-11FF1148I equivalent XC4VLX40-11FF1148I replacement XC4VLX40-11FF1148I cross reference XC4VLX40-11FF1148I footprint XC4VLX40-11FF1148I price XC4VLX40-11FF1148I stock XC4VLX40-11FF1148I vs XC4VLX40-11FF1148C AMD XC4VLX40-11FF1148I XC4VLX40 1148-pin FCBGA FPGA XC4VLX40-11FF1148I network processing XC4VLX40-11FF1148I programming XC4VLX40-11FF1148I schematic

相关元器件 & 术语

Advanced Micro Devices AMD Xilinx XC4VLX40-11FF1148I XC4VLX40-11FF1148C XC4VLX40-11FFG1148I XC4VLX40-11FFG1148C XC4VLX40-11FF1148IS2 Virtex-4 LX FPGA field-programmable gate array programmable logic configurable logic block CLB logic cell block RAM FCBGA-1148 BGA surface-mount package CMOS 90 nm process technology 1,028 MHz 1.2 V core supply network packet processing industrial control embedded signal processing FPGA configuration controlled-impedance routing
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情