XC5VLX20T-2FFG323C - Virtex-5 LXT FPGA 323-BBGA | AMD
Référence : XC5VLX20T-2FFG323C ✗ Fin de vieXC5VLX20T-2FFG323C Présentation
An FPGA is a programmable semiconductor whose logic fabric, interconnect, input/output blocks, block RAM, DSP resources, and other functional blocks can be configured after manufacture. The Virtex-5 LXT family combines programmable logic with dedicated hardware for demanding embedded systems. XC5VLX20T-2FFG323C is positioned for designs that need a moderate amount of parallel processing, deterministic real-time behavior, flexible peripheral integration, and high-speed serial or parallel interfaces without using a fixed-function ASIC.
The XC5VLX20T family uses ASMBL column-based interconnect and 65 nm CMOS fabrication. The 323-pin FCBGA package supports a dense board layout for systems requiring many I/O and power connections. The device is identified as a Virtex-5 LXT FPGA with 1,560 logic cells and an internal frequency listed up to 1,098 MHz. Actual design performance depends on the selected clock, logic architecture, I/O standards, memory mapping, speed grade, and tool configuration.
Typical application areas include industrial automation, communications infrastructure, instrumentation, test and measurement, embedded control, high-speed interface bridging, and signal-processing systems. The large pin count and mixed logic capability allow a design to combine control logic, data acquisition, protocol handling, and local storage within one programmable device. A complete design still requires a suitable power supply, decoupling network, clocking strategy, configuration memory or configuration interface, and careful BGA layout.
Designers should pay particular attention to the distinction between the -2 and -3 speed grades. XC5VLX20T-3FFG323C shares the identified Virtex-5 LXT family and 323-BBGA package but has a different speed-grade designation. XC5VLX20T-2FF323C is also associated with the same 323-pin family in listing data, but package suffix, temperature grade, and exact ordering code must be verified before substitution. This page provides the target MPN and its documented family characteristics without assuming that a different suffix is electrically identical.
A key engineering consideration is that the -2 speed grade and exact FFG323C ordering code define the device behavior, qualification conditions, and timing assumptions used by the implementation tools. Before replacing the part, engineers should compare the complete ordering codes, package ball maps, electrical limits, temperature ratings, and speed-specific timing reports. The AMD package-pinout resource should be used to confirm every ball assignment during PCB layout and hardware bring-up.
This page combines the exact ordering information, family specifications, package details, source links, compatible-device comparisons, and practical implementation guidance for engineers evaluating the XC5VLX20T-2FFG323C. It is intended to support design selection and sourcing decisions while keeping package, speed-grade, and temperature-suffix differences explicit.
Alternatives de remplacement direct pour XC5VLX20T-2FFG323C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
XC5VLX20T-3FFG323C
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →XC5VLX20T-2FFG323I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC5VLX20T-1FFG323C
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →XC5VLX20T-2FFG323E
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC5VLX20T-3FFG323I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
XC5VLX20T-2FFG323C Valeurs maximales et caractéristiques électriques
| Device Type | Virtex-5 LXT Field Programmable Gate Array (FPGA) |
| Logic Cells | 1,560 logic cells |
| User I/O | 172 I/O |
| Boîtier | 323-pin FCBGA, 19 x 19 mm |
| Package Type | 323-BBGA / FCBGA |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V |
| Internal Frequency | Up to 1,098 MHz |
| Speed Grade | -2 |
| Logic Family | Virtex-5 LXT |
| Température de fonctionnement | 0 °C to +85 °C |
| Device Pin Count | 323 pins |
| Architecture | ASMBL column-based FPGA architecture |
| Type de montage | Surface mount |
Guide de configuration des broches du XC5VLX20T-2FFG323C 323-bbga / fcbga
Configuration des broches du XC5VLX20T-2FFG323C (boîtier 323-bbga / fcbga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour XC5VLX20T-2FFG323C.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
XC5VLX20T-2FFG323C convient pour 6 applications: Industrial Automation Controllers, Communications Interface Bridging, High-Speed Data Acquisition, Test and Measurement Equipment, Embedded Control Systems, Signal Processing Subsystems.
Industrial Automation Controllers
The XC5VLX20T-2FFG323C fits industrial automation controllers that combine sequencing, machine-state monitoring, communications, and deterministic control logic. Its 1,560 logic cells provide parallel programmable resources, while 172 user I/O allow the design to connect sensors, actuators, encoders, safety interlocks, and communications transceivers. The 323-pin FCBGA keeps the component compact, although the board must provide a dense, well-controlled power and escape-routing network. The 0 °C to +85 °C range suits controlled indoor equipment when the final enclosure temperature stays within the device limits.
Recommandé
Communications Interface Bridging
The XC5VLX20T-2FFG323C is appropriate for communications equipment that must bridge parallel logic, buffered serial channels, control registers, and protocol engines. The 172 user I/O provide connectivity for multiple buses and status signals, while the FPGA fabric can implement deterministic framing, checksum, buffer, and timing functions in parallel. Its internal-frequency listing reaches 1,098 MHz, but interface rates must be constrained by actual timing closure and external transceiver characteristics. For production hardware, verify pin assignments against the AMD package files before routing.
Recommandé
High-Speed Data Acquisition
The XC5VLX20T-2FFG323C can support parallel data-acquisition systems where multiple channels, digital filtering, triggering, and data formatting must operate concurrently. The 1,560 logic cells allow acquisition control and preprocessing to be combined in one programmable device, reducing external logic overhead. The 172 I/O are useful for wide parallel buses, although analog front ends still require suitable converters and signal conditioning. Practical performance depends on pin placement, trace matching, clock jitter, grounding, and the selected I/O standards rather than the internal-frequency headline alone.
Recommandé
Test and Measurement Equipment
The XC5VLX20T-2FFG323C fits instrument-control and measurement systems that coordinate acquisition timing, calibration tables, trigger logic, display data, and communications. Its programmable fabric can execute several real-time operations concurrently, while 172 I/O support instrument control buses, status lines, and external memory or converters. The 323-ball package helps minimize board area but demands careful escape routing and power planning. For laboratory or production test equipment, the stated 0 °C to +85 °C range must be reconciled with ambient temperature and internal heat rise.
Recommandé
Embedded Control Systems
The XC5VLX20T-2FFG323C can serve as the programmable control core in an embedded system requiring deterministic hardware behavior, custom peripheral integration, and parallel state-machine execution. Its 65 nm Virtex-5 LXT implementation combines 1,560 logic cells with 172 I/O, allowing motor sequencing, sensor fusion logic, watchdog functions, and communications handling to share one device. Software-defined control remains possible, but critical timing paths should be implemented with hardware awareness. Configuration storage, clocking, reset behavior, and power sequencing must be designed as part of the complete platform.
Recommandé
Signal Processing Subsystems
The XC5VLX20T-2FFG323C is suitable for modular signal-processing functions such as parallel filtering, correlation, data formatting, and real-time event processing. Its programmable architecture allows design-specific pipelines and fixed control blocks to be combined without implementing a custom ASIC. The listed internal frequency of up to 1,098 MHz provides a timing reference, not a guaranteed throughput for every pipeline; architecture, routing congestion, device utilization, and clock quality determine the result. Package-aware pin placement is particularly important when high-speed signals travel between the FPGA and external converters or memory.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour XC5VLX20T-2FFG323C — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | XC5VLX20T-3FFG323C | XC5VLX20T-2FFG323I | XC5VLX20T-1FFG323C | XC5VLX20T-2FFG323E | XC5VLX20T-3FFG323I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 323-BBGA / FCBGA, 19 x 19 mm | 323-BBGA / FCBGA | 323-BBGA / FCBGA | 323-BBGA / FCBGA | 323-BBGA / FCBGA | 323-BBGA / FCBGA |
| FPGA Family | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT |
| Speed Grade | -2 | -3 | -2 | -1 | -2 | -3 |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Special Features | Virtex-5 LXT programmable FPGA | Virtex-5 LXT, -3 speed grade | Virtex-5 LXT, -2 speed grade, I suffix | Virtex-5 LXT, -1 speed grade | Virtex-5 LXT, -2 speed grade, E suffix | Virtex-5 LXT, -3 speed grade, I suffix |
Principaux différenciateurs
- Exact -2 speed-grade configuration (vs XC5VLX20T-3FFG323C)
- Original C suffix ordering identity (vs XC5VLX20T-2FFG323I)
- Documented 1,560-logic-cell and 172-I/O configuration (vs XC5VLX20T-1FFG323C)
Notes de conception
Build the footprint and escape-routing plan from the AMD package-pinout files for the exact XC5VLX20T-2FFG323C ordering code. The 323-ball FCBGA is only about 19 x 19 mm, so signal escapes require a deliberate via strategy and may need microvias or fine-pitch assembly support. Confirm pad dimensions, solder-mask definition, component placement orientation, and assembly capability against the official package drawing before releasing fabrication files.
Separate core and I/O supply planning according to the manufacturer power architecture, and place the required decoupling capacitors close to their assigned package balls. Do not infer the complete power-pin map from the number of balls. Check voltage tolerances, sequencing requirements, current limits, and power-up behavior for the exact device in the official documentation. High-speed or high-switching designs should also evaluate return-current paths and plane splitting.
Use the package-specific ball assignments to keep high-speed clocks, chip-selects, and data buses on suitable pins, then validate return paths through the power and ground planes. The 1,098 MHz internal-frequency figure is a device-family limit rather than a guaranteed clock rate for an external interface. Constrain the design with speed-grade-specific timing, verify input and output standards per bank, and simulate termination, skew, jitter, and loading before fabrication.
Do not substitute XC5VLX20T-2FF323C, XC5VLX20T-2FFG323I, or a different speed grade solely because each part name contains XC5VLX20T and 323. Confirm the full ordering code, speed grade, temperature grade, package ball map, electrical limits, and tool configuration. Also verify that the legacy Vivado or ISE project and configuration files recognize the replacement device; a physically similar package does not remove software or qualification constraints.
Informations de conformité
The target is a commercial FPGA rather than an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the exact AMD orderable-part documentation or current declaration.