AMD

XC5VLX20T-2FFG323C - Virtex-5 LXT FPGA 323-BBGA | AMD

MPN: XC5VLX20T-2FFG323C ✗ End of Life
1 V Vdss 323-pin FCBGA, 19 x 19 mm Package Up to 1,098 MHz Speed
MOQ: 1 |

XC5VLX20T-2FFG323C Overview

The AMD/Xilinx XC5VLX20T-2FFG323C is a Virtex-5 LXT field-programmable gate array (FPGA) built on 65 nm CMOS technology, with 1,560 logic cells, 172 user I/O, and a 323-pin FCBGA package measuring approximately 19 x 19 mm. The device is intended for embedded processing, signal processing, communications, industrial control, and high-speed digital logic designs requiring programmable logic and dedicated FPGA resources. The -2 speed designation identifies the device speed grade, while FFG323C identifies the package, temperature, and ordering characteristics.

An FPGA is a programmable semiconductor whose logic fabric, interconnect, input/output blocks, block RAM, DSP resources, and other functional blocks can be configured after manufacture. The Virtex-5 LXT family combines programmable logic with dedicated hardware for demanding embedded systems. XC5VLX20T-2FFG323C is positioned for designs that need a moderate amount of parallel processing, deterministic real-time behavior, flexible peripheral integration, and high-speed serial or parallel interfaces without using a fixed-function ASIC.

The XC5VLX20T family uses ASMBL column-based interconnect and 65 nm CMOS fabrication. The 323-pin FCBGA package supports a dense board layout for systems requiring many I/O and power connections. The device is identified as a Virtex-5 LXT FPGA with 1,560 logic cells and an internal frequency listed up to 1,098 MHz. Actual design performance depends on the selected clock, logic architecture, I/O standards, memory mapping, speed grade, and tool configuration.

Typical application areas include industrial automation, communications infrastructure, instrumentation, test and measurement, embedded control, high-speed interface bridging, and signal-processing systems. The large pin count and mixed logic capability allow a design to combine control logic, data acquisition, protocol handling, and local storage within one programmable device. A complete design still requires a suitable power supply, decoupling network, clocking strategy, configuration memory or configuration interface, and careful BGA layout.

Designers should pay particular attention to the distinction between the -2 and -3 speed grades. XC5VLX20T-3FFG323C shares the identified Virtex-5 LXT family and 323-BBGA package but has a different speed-grade designation. XC5VLX20T-2FF323C is also associated with the same 323-pin family in listing data, but package suffix, temperature grade, and exact ordering code must be verified before substitution. This page provides the target MPN and its documented family characteristics without assuming that a different suffix is electrically identical.

A key engineering consideration is that the -2 speed grade and exact FFG323C ordering code define the device behavior, qualification conditions, and timing assumptions used by the implementation tools. Before replacing the part, engineers should compare the complete ordering codes, package ball maps, electrical limits, temperature ratings, and speed-specific timing reports. The AMD package-pinout resource should be used to confirm every ball assignment during PCB layout and hardware bring-up.

This page combines the exact ordering information, family specifications, package details, source links, compatible-device comparisons, and practical implementation guidance for engineers evaluating the XC5VLX20T-2FFG323C. It is intended to support design selection and sourcing decisions while keeping package, speed-grade, and temperature-suffix differences explicit.

Drop-in alternatives for XC5VLX20T-2FFG323C — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

XC5VLX20T-3FFG323C

✅ Drop-In
AMD
📦 323-BBGA / FCBGA
Virtex-5 LXT field-programmable gate array · 19,968 logic elements · 1,560 CLBs · 958,464 RAM bits · 172 I/O pins · Second-generation ASMBLTM column-based architecture · Virtex-5 · LXT

Contact for price

View Datasheet →

XC5VLX20T-2FFG323I

✅ Drop-In ⚠️ Specs Unverified
📦 323-BBGA / FCBGA
Same XC5VLX20T-2 speed grade and FFG323 package family, but the I temperature suffix identifies a different temperature grade; the I-grade operating limits require confirmation.

📋 Reference alternative (not in catalog)

XC5VLX20T-1FFG323C

✅ Drop-In ⚠️ Specs Unverified
AMD
📦 323-BBGA / FCBGA
Virtex-5 LXT Field Programmable Gate Array · 19,968 cells · 1,560 blocks · 3,120 slices · 172 inputs · 1,098 MHz · 65 nm CMOS · 1 V

Contact for price

View Datasheet →

XC5VLX20T-2FFG323E

✅ Drop-In ⚠️ Specs Unverified
📦 323-BBGA / FCBGA
Same XC5VLX20T-2 speed grade and FFG323 package family, but the E suffix identifies a different temperature or operating-life grade; electrical limits require verification.

📋 Reference alternative (not in catalog)

XC5VLX20T-3FFG323I

✅ Drop-In ⚠️ Specs Unverified
📦 323-BBGA / FCBGA
Same Virtex-5 LXT FFG323 package family with the -3 speed grade and I temperature suffix; both differ from the target -2 C-grade ordering characteristics.

📋 Reference alternative (not in catalog)

XC5VLX20T-2FFG323C Maximum Ratings & Electrical Characteristics

Device Type Virtex-5 LXT Field Programmable Gate Array (FPGA)
Logic Cells 1,560 logic cells
User I/O 172 I/O
Package 323-pin FCBGA, 19 x 19 mm
Package Type 323-BBGA / FCBGA
Process Technology 65 nm CMOS
Core Supply Voltage 1 V
Internal Frequency Up to 1,098 MHz
Speed Grade -2
Logic Family Virtex-5 LXT
Operating Temperature 0 °C to +85 °C
Device Pin Count 323 pins
Architecture ASMBL column-based FPGA architecture
Mounting Type Surface mount

XC5VLX20T-2FFG323C 323-bbga / fcbga Pin Configuration Guide

Pin configuration for XC5VLX20T-2FFG323C (323-bbga / fcbga package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

323-bbga / fcbga package pinout diagram for XC5VLX20T-2FFG323C

No detailed pinout data available for XC5VLX20T-2FFG323C.

Refer to the datasheet for full pin configuration.

Typical Applications

XC5VLX20T-2FFG323C is suitable for 6 applications: Industrial Automation Controllers, Communications Interface Bridging, High-Speed Data Acquisition, Test and Measurement Equipment, Embedded Control Systems, Signal Processing Subsystems.

🏭

Industrial Automation Controllers

The XC5VLX20T-2FFG323C fits industrial automation controllers that combine sequencing, machine-state monitoring, communications, and deterministic control logic. Its 1,560 logic cells provide parallel programmable resources, while 172 user I/O allow the design to connect sensors, actuators, encoders, safety interlocks, and communications transceivers. The 323-pin FCBGA keeps the component compact, although the board must provide a dense, well-controlled power and escape-routing network. The 0 °C to +85 °C range suits controlled indoor equipment when the final enclosure temperature stays within the device limits.

🌐

Communications Interface Bridging

The XC5VLX20T-2FFG323C is appropriate for communications equipment that must bridge parallel logic, buffered serial channels, control registers, and protocol engines. The 172 user I/O provide connectivity for multiple buses and status signals, while the FPGA fabric can implement deterministic framing, checksum, buffer, and timing functions in parallel. Its internal-frequency listing reaches 1,098 MHz, but interface rates must be constrained by actual timing closure and external transceiver characteristics. For production hardware, verify pin assignments against the AMD package files before routing.

📡

High-Speed Data Acquisition

The XC5VLX20T-2FFG323C can support parallel data-acquisition systems where multiple channels, digital filtering, triggering, and data formatting must operate concurrently. The 1,560 logic cells allow acquisition control and preprocessing to be combined in one programmable device, reducing external logic overhead. The 172 I/O are useful for wide parallel buses, although analog front ends still require suitable converters and signal conditioning. Practical performance depends on pin placement, trace matching, clock jitter, grounding, and the selected I/O standards rather than the internal-frequency headline alone.

🔧

Test and Measurement Equipment

The XC5VLX20T-2FFG323C fits instrument-control and measurement systems that coordinate acquisition timing, calibration tables, trigger logic, display data, and communications. Its programmable fabric can execute several real-time operations concurrently, while 172 I/O support instrument control buses, status lines, and external memory or converters. The 323-ball package helps minimize board area but demands careful escape routing and power planning. For laboratory or production test equipment, the stated 0 °C to +85 °C range must be reconciled with ambient temperature and internal heat rise.

⚙️

Embedded Control Systems

The XC5VLX20T-2FFG323C can serve as the programmable control core in an embedded system requiring deterministic hardware behavior, custom peripheral integration, and parallel state-machine execution. Its 65 nm Virtex-5 LXT implementation combines 1,560 logic cells with 172 I/O, allowing motor sequencing, sensor fusion logic, watchdog functions, and communications handling to share one device. Software-defined control remains possible, but critical timing paths should be implemented with hardware awareness. Configuration storage, clocking, reset behavior, and power sequencing must be designed as part of the complete platform.

📶

Signal Processing Subsystems

The XC5VLX20T-2FFG323C is suitable for modular signal-processing functions such as parallel filtering, correlation, data formatting, and real-time event processing. Its programmable architecture allows design-specific pipelines and fixed control blocks to be combined without implementing a custom ASIC. The listed internal frequency of up to 1,098 MHz provides a timing reference, not a guaranteed throughput for every pipeline; architecture, routing congestion, device utilization, and clock quality determine the result. Package-aware pin placement is particularly important when high-speed signals travel between the FPGA and external converters or memory.

What is the AMD XC5VLX20T-2FFG323C?
The AMD/Xilinx XC5VLX20T-2FFG323C is a Virtex-5 LXT FPGA with 1,560 logic cells, 172 user I/O, 65 nm CMOS construction, and a 323-pin FCBGA package. According to the product listing, the package measures approximately 19 x 19 mm and the device uses a 1 V core supply. The -2 suffix denotes the speed grade, while the remaining characters identify package and ordering variants that must be checked before replacement.
How many logic cells and I/O does XC5VLX20T-2FFG323C have?
The XC5VLX20T-2FFG323C contains 1,560 logic cells and provides 172 user I/O. The 323-ball package therefore includes additional power, ground, configuration, clock, and dedicated-function connections in addition to the user I/O. The 1,560 logic-cell figure describes the programmable fabric capacity; final usable logic depends on the design architecture, memory requirements, routing, timing closure, and selected device features.
What package does XC5VLX20T-2FFG323C use?
The XC5VLX20T-2FFG323C uses a 323-pin FCBGA package identified in listings as 323-BBGA, with an approximate body size of 19 x 19 mm. The AMD package-pinout resource is the controlling reference for assigning ball locations. Because FCBGA devices are surface-mounted and use an array of balls, the board layout must follow the package-specific footprint and ball-map files rather than a generic BGA land pattern.
What technology and process does XC5VLX20T-2FFG323C use?
The XC5VLX20T-2FFG323C is manufactured using 65 nm CMOS technology and is identified as a Virtex-5 LXT programmable logic device. Listing data also identifies a 1 V core supply and an internal frequency of up to 1,098 MHz. The maximum internal-frequency value does not guarantee that every circuit will operate at that rate; timing performance depends on the clock target, logic depth, routing, I/O standards, and speed-specific design constraints.
Where can I find the XC5VLX20T-2FFG323C datasheet and pinout?
The official AMD Virtex-5 package-pinout page provides the package files and ball-assignment material needed to begin the XC5VLX20T-2FFG323C PCB layout. For the exact ordering code, use the AMD product documentation and the device-specific package files rather than relying on a generic BGA drawing. The pinout archive identifies its files as ASCII text, allowing designers to compare ball numbers directly with their schematic and component-library data.
Can XC5VLX20T-3FFG323C replace XC5VLX20T-2FFG323C?
The XC5VLX20T-3FFG323C is a closely related Virtex-5 LXT device with the same listed 323-BBGA package and 1,560 logic-cell family configuration, but it carries the -3 speed designation instead of -2. Pin placement appears compatible at the package-family level, yet replacement requires review of the exact ordering code, timing reports, electrical limits, temperature suffix, and tool-supported device identifiers. Do not assume that a faster grade preserves the original -2 timing guarantees.
What is the best drop-in replacement for XC5VLX20T-2FFG323C?
The closest documented drop-in candidate is the same-family XC5VLX20T-3FFG323C because it is listed with the same Virtex-5 LXT architecture, 1,560 logic cells, 172 I/O, and 323-BBGA package. It differs by speed grade, so it is not an identical functional substitute. For an exact replacement, the complete ordering code must match; no cross-brand drop-in FPGA with a verified pin-to-pin match is established by the available technical references.
Is there an AMD equivalent to XC5VLX20T-2FFG323C with a different speed grade?
The AMD XC5VLX20T-3FFG323C is the closest family alternative with a different speed grade. It uses the same identified 323-BBGA package and belongs to the Virtex-5 LXT device group with 1,560 logic cells and 172 I/O. Engineers should treat the speed-grade difference as a timing decision rather than simply installing a different suffix: verify setup and hold requirements, maximum clock targets, I/O behavior, and the exact package and temperature identifiers first.
When should I choose XC5VLX20T-2FFG323C instead of XC5VLX20T-3FFG323C?
Choose the XC5VLX20T-2FFG323C when the design was characterized for the -2 speed grade or requires that exact ordering code for qualification and configuration control. Choose the XC5VLX20T-3FFG323C only after confirming that its faster grade is supported by the selected tools, meets the required timing, and does not introduce unintended electrical, thermal, or qualification changes. The target device provides 1,560 logic cells, 172 I/O, and a 323-pin FCBGA package.
Where can I buy XC5VLX20T-2FFG323C and what is its lead time?
Use the Request a Quote form on this page to ask for XC5VLX20T-2FFG323C availability, lead time, minimum order quantity, and packaging availability. The device is listed by major distributors and marketplace records, but current stock and lead time are dynamic and should be confirmed for the exact 323-BBGA ordering code. Because this is a mature FPGA family, legacy inventory and lifecycle planning are important considerations for long-lived programs.
What is the price of XC5VLX20T-2FFG323C?
The current XC5VLX20T-2FFG323C quotation is generated through the Request a Quote form on this page. The exact price can vary with quantity, package form, authorized sourcing status, and market availability. Submit the complete MPN rather than a shortened family code, because XC5VLX20T devices with different speed grades, temperature suffixes, or package identifiers are not necessarily interchangeable commercially.
Is XC5VLX20T-2FFG323C in stock?
The XC5VLX20T-2FFG323C is identified as a purchasable legacy-family FPGA, but current stock should be checked through the Request a Quote form on this page. Distributor listings may include the target MPN while still changing inventory from one day to the next. Include your required quantity, date code preference, target package form, and quality or traceability requirements when requesting a quotation to avoid an unsuitable legacy substitution.
What can replace XC5VLX20T-2FFG323C?
The XC5VLX20T-3FFG323C can serve as a same-package, same-family starting point because both devices are listed as 323-BBGA Virtex-5 LXT FPGAs with 1,560 logic cells and 172 I/O. The replacement is not identical because the speed-grade code changes from -2 to -3. Other FF323 and FFG323 suffixes must be checked for package, temperature, and qualification differences before being considered drop-in parts.
Is XC5VLX20T-2FFG323C suitable for industrial control and automation?
The XC5VLX20T-2FFG323C is suitable for programmable control and automation logic when its 1,560 logic cells, 172 I/O, and 0 °C to +85 °C operating range meet the system requirements. Its 65 nm Virtex-5 LXT architecture supports deterministic hardware logic and flexible I/O integration. Industrial suitability still depends on the final operating environment, enclosure temperature, isolation requirements, EMC design, and lifecycle expectations.
What are the key specifications of XC5VLX20T-2FFG323C?
The key specifications are 1,560 logic cells, 172 user I/O, 65 nm CMOS technology, a 1 V core supply, an internal frequency listed up to 1,098 MHz, and a 323-pin FCBGA package measuring approximately 19 x 19 mm. The device belongs to the Virtex-5 LXT family and uses the -2 speed grade. These values define the device family and ordering context; achievable system timing depends on design and tool configuration.
How should a PCB designer handle the XC5VLX20T-2FFG323C FCBGA package?
Start the layout from the AMD Virtex-5 package-pinout files for the exact device rather than from a generic 323-ball library. Assign every signal, power, ground, configuration, clock, and reserved ball from those files, and place the BGA footprint on the component side according to the manufacturer drawing. The dense 19 x 19 mm FCBGA also requires controlled escape routing, power-plane integrity, via strategy, and assembly-process capability for reliable manufacture.

Engineering reference data for XC5VLX20T-2FFG323C — comparison, design guidance, and compliance information.

Selection Guide

Choose the XC5VLX20T-2FFG323C when an existing Virtex-5 LXT design specifically requires the -2 speed grade, C suffix, and 323-BBGA ordering identity. It provides 1,560 logic cells, 172 user I/O, 65 nm CMOS fabrication, and a compact 19 x 19 mm FCBGA package for embedded, industrial, communications, and signal-processing logic. XC5VLX20T-3FFG323C is the closest listed speed-grade alternative and may suit a new design that accepts the -3 grade after complete timing verification. XC5VLX20T-2FFG323I retains the -2 speed grade but changes the temperature or qualification suffix. XC5VLX20T-1FFG323C is slower and should be selected only when its timing performance meets the design. For all variants, compare the exact ordering code, package balls, electrical limits, temperature grade, supported tools, configuration files, and lifecycle requirements before approving a substitution.

Comparison with Alternatives

Parameter This Product XC5VLX20T-3FFG323C XC5VLX20T-2FFG323I XC5VLX20T-1FFG323C XC5VLX20T-2FFG323E XC5VLX20T-3FFG323I
Brand AMD AMD AMD AMD AMD AMD
Package 323-BBGA / FCBGA, 19 x 19 mm 323-BBGA / FCBGA 323-BBGA / FCBGA 323-BBGA / FCBGA 323-BBGA / FCBGA 323-BBGA / FCBGA
FPGA Family Virtex-5 LXT Virtex-5 LXT Virtex-5 LXT Virtex-5 LXT Virtex-5 LXT Virtex-5 LXT
Speed Grade -2 -3 -2 -1 -2 -3
Process Technology 65 nm CMOS 65 nm CMOS 65 nm CMOS 65 nm CMOS 65 nm CMOS 65 nm CMOS
Core Supply Voltage 1 V 1 V 1 V 1 V 1 V 1 V
Special Features Virtex-5 LXT programmable FPGA Virtex-5 LXT, -3 speed grade Virtex-5 LXT, -2 speed grade, I suffix Virtex-5 LXT, -1 speed grade Virtex-5 LXT, -2 speed grade, E suffix Virtex-5 LXT, -3 speed grade, I suffix

Key Differentiators

  • Exact -2 speed-grade configuration (vs XC5VLX20T-3FFG323C)
  • Original C suffix ordering identity (vs XC5VLX20T-2FFG323I)
  • Documented 1,560-logic-cell and 172-I/O configuration (vs XC5VLX20T-1FFG323C)

Design Notes

Build the footprint and escape-routing plan from the AMD package-pinout files for the exact XC5VLX20T-2FFG323C ordering code. The 323-ball FCBGA is only about 19 x 19 mm, so signal escapes require a deliberate via strategy and may need microvias or fine-pitch assembly support. Confirm pad dimensions, solder-mask definition, component placement orientation, and assembly capability against the official package drawing before releasing fabrication files.

Separate core and I/O supply planning according to the manufacturer power architecture, and place the required decoupling capacitors close to their assigned package balls. Do not infer the complete power-pin map from the number of balls. Check voltage tolerances, sequencing requirements, current limits, and power-up behavior for the exact device in the official documentation. High-speed or high-switching designs should also evaluate return-current paths and plane splitting.

Use the package-specific ball assignments to keep high-speed clocks, chip-selects, and data buses on suitable pins, then validate return paths through the power and ground planes. The 1,098 MHz internal-frequency figure is a device-family limit rather than a guaranteed clock rate for an external interface. Constrain the design with speed-grade-specific timing, verify input and output standards per bank, and simulate termination, skew, jitter, and loading before fabrication.

Do not substitute XC5VLX20T-2FF323C, XC5VLX20T-2FFG323I, or a different speed grade solely because each part name contains XC5VLX20T and 323. Confirm the full ordering code, speed grade, temperature grade, package ball map, electrical limits, and tool configuration. Also verify that the legacy Vivado or ISE project and configuration files recognize the replacement device; a physically similar package does not remove software or qualification constraints.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The target is a commercial FPGA rather than an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the exact AMD orderable-part documentation or current declaration.

Data verified on: 2026-11-18 — data verified and curated by XAIPART's component engineering team

Related Searches

XC5VLX20T-2FFG323C datasheet XC5VLX20T-2FFG323C pinout XC5VLX20T-2FFG323C specifications XC5VLX20T-2FFG323C price XC5VLX20T-2FFG323C stock XC5VLX20T-2FFG323C replacement XC5VLX20T-2FFG323C equivalent AMD XC5VLX20T-2FFG323C XC5VLX20T-2FFG323C 323 FCBGA XC5VLX20T-2FFG323C application circuit XC5VLX20T-2FFG323C vs XC5VLX20T-3FFG323C XC5VLX20T-2FFG323C footprint

Related Components & Terms

AMD Xilinx XC5VLX20T-2FFG323C XC5VLX20T-3FFG323C XC5VLX20T-2FFG323I XC5VLX20T-1FFG323C XC5VLX20T-2FFG323E XC5VLX20T-3FFG323I Virtex-5 LXT field-programmable gate array FPGA programmable logic logic cell user I/O ASMBL 65 nm CMOS FCBGA 323-BBGA surface-mount semiconductor internal frequency speed grade temperature grade signal processing industrial automation programmable logic device
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details