AMD

XC5VLX30-1FFG676C - 30K Logic Cell FPGA | AMD

Référence : XC5VLX30-1FFG676C ✗ Fin de vie
1 V Vdss 676-ball FCBGA Package -1 Speed 1,179,648 bits Memory
MOQ : 1 |

XC5VLX30-1FFG676C Présentation

The AMD XC5VLX30-1FFG676C is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, approximately 400 I/O, and a 676-ball FCBGA package. It is manufactured on 65 nm CMOS technology and operates from a 1 V core supply. The -1 designation identifies its performance grade, while FFG676 identifies the lead-free 676-ball package configuration.

A field-programmable gate array, or FPGA, is a programmable digital semiconductor whose logic fabric and interconnect can be configured after fabrication. An FPGA belongs to the broader semiconductor and programmable-logic hierarchy, where it sits between fixed-function ASICs and software-programmable processors. It combines configurable lookup tables, flip-flops, block RAM, programmable I/O, dedicated hard processors, and digital clock-management resources on one device.

The XC5VLX30 provides 30,720 configurable logic cells for parallel data processing, protocol bridging, control logic, signal acquisition, and embedded system functions. Its stated 400 I/O supports connections to external memory, interfaces, converters, and custom peripherals. Block RAM supports buffering, packet storage, and data-plane functions, while dedicated DSP slices accelerate multiply-accumulate operations commonly used in communications and signal processing.

The 65 nm CMOS implementation belongs to the Virtex-5 generation of AMD FPGA technology. Its configurable architecture allows a common board design to support multiple firmware or bitstream configurations, reducing the need for separate custom silicon. Selection still requires verification of the selected I/O standard, clock topology, memory interface requirements, pin constraints, and timing closure for the target design.

Typical applications include industrial communications equipment, test and measurement systems, video and image processing, network interface controllers, high-speed data acquisition, and embedded control platforms. The large logic capacity and 676-ball package make the device appropriate for designs requiring substantial parallel resources rather than simple interface bridging or small control tasks.

Board implementation must follow the AMD Virtex-5 package pinout and layout guidance. Decoupling, power-plane integrity, clock routing, and high-speed signaling are especially important in a 676-ball FCBGA design. PCB stackup, via counts, controlled-impedance routing, and thermal management should be reviewed before the footprint and power architecture are released.

This page combines the exact ordering information, package identity, technology details, verified drop-in candidates, and application-specific engineering guidance needed to evaluate the XC5VLX30-1FFG676C. It also highlights the limits of automatic substitution, particularly when speed grade, temperature grade, device generation, or bitstream compatibility differs.

Alternatives de remplacement direct pour XC5VLX30-1FFG676C — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec XC5VLX30-1FFG676C (même facteur de forme et même empreinte) — différant par Device Type, Package, Temperature Grade, Terminal Form, Logic Cells.

Xilinx
Device Type: Virtex-5 LX Field Programmable Gate Array (FPGA)
Package: 676-BBGA (FCBGA), 676 balls
Terminal Form: Ball (BGA)
Comparer avec XC5VLX30-1FFG676C →
AMD
Device Type: Virtex-5 LX field-programmable gate array (FPGA)
Temperature Grade: Industrial
Terminal Form: Ball
Comparer avec XC5VLX30-1FFG676C →
AMD
Package: 676-BBGA FCBGA
Temperature Grade: Industrial
Comparer avec XC5VLX30-1FFG676C →
AMD
Device Type: Virtex-5 LX FPGA
Package: 676-pin FCBGA
Temperature Grade: Commercial, C suffix
Comparer avec XC5VLX30-1FFG676C →
AMD
Device Type: 1 Virtex-5 LX FPGA
Terminal Form: 1 ball surface-mount terminal
Comparer avec XC5VLX30-1FFG676C →

XC5VLX30-1FFG676I

✅ Remplacement direct
AMD
📦 676-ball FCBGA
Virtex-5 LX field-programmable gate array · 30,720 cells · 2,400 CLBs · 1,179,648 bits (1,152 Kbit) · 32 slices · 400 I/Os · 0.95 V to 1.05 V · 65 nm

Contactez-nous pour le prix

Voir la fiche technique →

XC5VLX30-2FFG676C

✅ Remplacement direct
AMD
📦 676-ball FCBGA
Virtex-5 LX FPGA · 30,720 cells · 65 nm CMOS · 1 V · 400 I/O · 676-pin FCBGA · FCBGA, surface mount · -2

Contactez-nous pour le prix

Voir la fiche technique →

XC5VLX30-3FFG676C

✅ Remplacement direct
AMD
📦 676-ball FCBGA
Virtex-5 LX field-programmable gate array · 30,720 · 2,400 · 2,400 · 400 · 1,179,648 bits · 65 nm CMOS · 1 V

Contactez-nous pour le prix

Voir la fiche technique →

XC6VLX30-1FFG676C

✅ Remplacement direct
📦 676-ball FCBGA
Successor FPGA generation replaces Virtex-5 LX while retaining a 30,720-logic-cell-class device and 676-ball package

📋 Alternative de référence (hors catalogue)

XC5VLX30-1FFG676ES

✅ Remplacement direct
📦 676-ball FCBGA
ES ordering suffix replaces C while the device, -1 speed grade, and 676-ball package remain aligned

📋 Alternative de référence (hors catalogue)

XC5VLX30-1FFG676C Valeurs maximales et caractéristiques électriques

Device Type Virtex-5 LX Field-Programmable Gate Array
Logic Cells 30,720 cells
Number of I/O Approximately 400 I/O
Fabric Memory 1,179,648 bits
Process Technology 65 nm CMOS
Core Supply Voltage 1 V
Boîtier 676-ball FCBGA
Package Designation FFG676
Speed Grade -1
Temperature Grade Commercial
Technology Family Virtex-5 LX
Programmability SRAM-configurable FPGA
Type de montage Surface mount
Nombre de broches 676 balls

Guide de configuration des broches du XC5VLX30-1FFG676C ffg676

Configuration des broches du XC5VLX30-1FFG676C (boîtier ffg676). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier ffg676 pour le XC5VLX30-1FFG676C

Aucune donnée de brochage détaillée disponible pour XC5VLX30-1FFG676C.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

XC5VLX30-1FFG676C convient pour 6 applications: Industrial Communication Equipment, Test and Measurement Systems, High-Speed Data Acquisition, Video and Image Processing, Network Interface Controllers, Embedded Control and Instrumentation.

🏭

Industrial Communication Equipment

The XC5VLX30-1FFG676C fits industrial communication systems that require parallel protocol conversion, buffering, and supervisory logic around multiple external interfaces. Its 30,720 logic cells and approximately 400 I/O provide substantial capacity for Ethernet or industrial bus bridging, packet classification, and control-plane functions. The commercial C suffix must remain within its specified operating-temperature limits; use the XC5VLX30-1FFG676I candidate when industrial-temperature operation is mandatory. A 676-ball FCBGA also requires a multilayer PCB with carefully controlled power delivery and signal-integrity design.

🖥️

Test and Measurement Systems

The Virtex-5 LX architecture is suitable for test and measurement instruments that combine acquisition control, pattern generation, timing logic, and data processing in one FPGA. The XC5VLX30's 30,720 logic cells can implement parallel state machines and control channels, while its fabric memory supports buffers and temporary test-pattern storage. Designers should allocate specific I/O standards to the ADC, DAC, clock, and trigger interfaces, then confirm pin placement against the 676-ball package file. Clock jitter, termination, analog-device grounding, and FPGA power sequencing are central to repeatable measurement performance.

📡

High-Speed Data Acquisition

The XC5VLX30-1FFG676C can support high-speed data-acquisition systems by combining configurable digital logic with approximately 400 package I/O. Parallel interface logic, capture control, data formatting, and downstream processing can be implemented in the 30,720-logic-cell device. Performance depends on correct I/O-standard selection, source-synchronous clock routing, board-level impedance control, and timing closure. The commercial temperature grade should be checked against the acquisition enclosure's worst-case ambient conditions, and the design should include margin for FPGA power consumption during wide-lane transfers.

📺

Video and Image Processing

The XC5VLX30-1FFG676C is applicable to video and image-processing systems requiring parallel pixel pipelines, frame buffers, timing generation, and control interfaces. The device's 30,720 logic cells and 1,179,648 fabric-memory bits provide resources for pipeline processing and temporary buffering, while the large I/O count supports parallel sensor and display connections. Memory-mapped frame-buffer traffic must be balanced against available block RAM and external-memory bandwidth. Video designs should also verify whether legacy Virtex-5 video IP, clocking architecture, and licensing requirements still match the product roadmap.

🌐

Network Interface Controllers

The XC5VLX30-1FFG676C can implement network-interface and packet-processing logic where several channels, queues, and protocol layers must operate concurrently. Its 30,720 logic cells support parallel datapaths and state machines, while fabric memory provides storage for packet buffers and descriptors. External PHY or serializer interfaces require careful assignment of I/O standards, differential-pair routing, and reference-clock distribution in the 676-ball FCBGA layout. For production continuity, verify that required network IP, bitstream-generation tools, and device support are appropriate for a legacy Virtex-5 design.

🔧

Embedded Control and Instrumentation

The XC5VLX30-1FFG676C can serve as the central programmable controller in sophisticated instrumentation that requires simultaneous motor sequencing, sensor conditioning, safety interlocks, and data processing. Programmable logic can coordinate multiple I/O, implement deterministic control paths, and isolate timing-critical functions from a higher-level processor. A 676-ball package exposes substantial connectivity but also demands careful escape routing and a stable multilayer power architecture. The commercial-grade suffix limits environmental suitability, so temperature margins and protective enclosure design must be reviewed before deployment in variable industrial conditions.

What is the AMD XC5VLX30-1FFG676C?
The AMD XC5VLX30-1FFG676C is a Virtex-5 LX field-programmable gate array built on 65 nm CMOS technology. According to the AMD product listing, it contains 30,720 logic cells, 1,179,648 fabric-memory bits, approximately 400 I/O, and uses a 676-ball FCBGA package. It is intended for designs requiring substantially more programmable parallel logic than a small CPLD or interface FPGA.
What are the key specifications of XC5VLX30-1FFG676C?
The XC5VLX30-1FFG676C combines 30,720 logic cells, 1,179,648 fabric-memory bits, approximately 400 I/O, and a 1 V core supply. According to AMD and Xilinx product information, the device uses 65 nm CMOS technology and is packaged in a 676-ball FCBGA. The -1 suffix denotes the speed grade, while the commercial C suffix denotes its temperature grade.
Where can I download the XC5VLX30-1FFG676C datasheet and pinout?
The official AMD Virtex-5 package-pinout page provides downloadable package files in ASCII text format for the XC5VLX30-1FFG676C. According to AMD, these files should be used with the device datasheet, package drawings, and design documentation to assign balls, power rails, and I/O. Request the appropriate legacy device documentation through the Request a Quote form on this page if a complete controlled document set is required.
What package does XC5VLX30-1FFG676C use?
The XC5VLX30-1FFG676C uses a 676-ball FCBGA package identified by the FFG676 ordering code. AMD product information describes the same device as a 676-BBGA, FCBGA component. Because no 676-ball diagram exists in the supported package library, this page uses the default package visual rather than risking an incorrect ball map.
Can XC5VLX30-2FFG676C replace XC5VLX30-1FFG676C?
The XC5VLX30-2FFG676C can serve as a drop-in candidate when its higher speed grade and device characteristics satisfy the design requirements. According to the cross-reference results, it uses the same 676-ball FCBGA configuration but provides the -2 speed grade rather than -1. Timing should be revalidated because the faster grade can alter timing margins and power behavior.
What is the difference between XC5VLX30-1FFG676C and XC5VLX30-1FFG676I?
The XC5VLX30-1FFG676C and XC5VLX30-1FFG676I share the Virtex-5 LX device, 30,720 logic cells, 676-ball FCBGA package, and -1 speed grade. The principal ordering difference is temperature grade: C identifies the commercial-grade suffix, while I identifies the industrial-grade suffix. Industrial operation generally requires verification of the complete operating-temperature specification and environmental requirements.
When should I choose XC5VLX30-1FFG676C over XC6VLX30-1FFG676C?
Choose the XC5VLX30-1FFG676C when an existing Virtex-5 LX platform, architecture-specific IP, or proven 65 nm board design must be retained. The XC6VLX30-1FFG676C is a different FPGA generation with potentially different resources, power characteristics, configuration details, and tool requirements. A device-family migration requires complete timing, pinout, IP, and PCB validation rather than a simple procurement substitution.
Is XC5VLX30-1FFG676C suitable for industrial communication equipment?
The XC5VLX30-1FFG676C is suitable for industrial communication equipment when the commercial temperature rating, I/O standards, clocking, and lifecycle expectations meet the system requirements. Its 30,720 logic cells and approximately 400 I/O support parallel protocol handling, data-plane logic, and multiple external interfaces. The industrial XC5VLX30-1FFG676I should be evaluated when the enclosure has a wider temperature range.
Where can I buy XC5VLX30-1FFG676C and check its availability?
Use the Request a Quote form on this page to ask about XC5VLX30-1FFG676C availability, current unit pricing, quantity breaks, and expected lead time. The device is a legacy Virtex-5 FPGA, so supply can depend on remaining inventory rather than a current mass-production schedule. Confirm the exact FFG676 suffix, commercial temperature grade, and factory condition when requesting a quotation.
How much does XC5VLX30-1FFG676C cost?
Current XC5VLX30-1FFG676C pricing depends on quantity, condition, packaging, and supply status. Use the Request a Quote form on this page for a transaction-ready quotation rather than relying on a static listing figure. When requesting a quote, identify the required quantity, target package condition, production or prototype use, and any date-sensitive delivery requirement.
What is the lead time for XC5VLX30-1FFG676C?
The current lead time for XC5VLX30-1FFG676C must be confirmed against live inventory because it is an older Virtex-5 device. Use the Request a Quote form on this page to specify quantity, acceptable condition, and required delivery date. The FFG676 package, -1 speed grade, and commercial C suffix should remain unchanged in the request to avoid a mismatched allocation.
Is XC5VLX30-1FFG676C in stock?
Stock for XC5VLX30-1FFG676C should be verified for the exact ordering code through the Request a Quote form on this page. Search results identify the part and describe inventory listings, but they do not establish a guaranteed quantity or delivery window. A stock confirmation should include the 676-ball FFG package, -1 speed grade, commercial temperature suffix, and device condition.
What can replace XC5VLX30-1FFG676C?
The strongest same-family drop-in candidates are XC5VLX30-1FFG676I, XC5VLX30-2FFG676C, XC5VLX30-3FFG676C, and XC5VLX30-1FFG676ES. Each retains the 676-ball configuration and 30,720-logic-cell device identity, but speed grade, temperature grade, lifecycle state, or ordering suffix may differ. Check timing, temperature, qualification, and configuration compatibility before substitution.
Is XC5VLX30-1FFG676C the same as XC5VLX30-1FFG676I?
The XC5VLX30-1FFG676C and XC5VLX30-1FFG676I are closely related drop-in candidates with the same -1 speed grade and 676-ball package. They differ in temperature-grade suffix, with C denoting commercial grade and I denoting industrial grade. They are not interchangeable where the equipment must meet a specified industrial temperature range.
Is there a verified cross-brand drop-in equivalent for XC5VLX30-1FFG676C?
No verified cross-brand drop-in equivalent for the XC5VLX30-1FFG676C is established by the cross-reference results. Its combination of Virtex-5 LX architecture, 30,720 logic cells, 676-ball FCBGA package, configuration method, and tool dependencies is specific to the AMD/Xilinx platform. An unmarked device with the same package may differ materially in silicon, pinout, firmware, or timing, so it should not be treated as drop-in.
What design checks are required before using XC5VLX30-1FFG676C on a new PCB?
Before layout, verify the 676-ball pinout, supported voltage standards, power sequencing, decoupling, clock requirements, and all high-speed interface constraints against the AMD device documentation. Also confirm package ball assignments, PCB stackup, via-in-pad requirements, thermal performance, and the configuration method. The large FCBGA package requires careful power and signal-integrity planning.

Données de référence d'ingénierie pour XC5VLX30-1FFG676C — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the XC5VLX30-1FFG676C when maintaining an existing Virtex-5 LX design with the commercial C suffix, -1 speed grade, and 676-ball FFG package. Select the XC5VLX30-1FFG676I when the same electrical device is needed for industrial-temperature operation; verify its complete environmental specification. Use the -2 or -3 candidates when the PCB is unchanged but a faster grade is acceptable after timing and power revalidation. Consider the XC6VLX30-1FFG676C when moving to a newer architecture, but treat it as a migration requiring pin, IP, tool, power, and timing review rather than a simple replacement. No verified cross-brand drop-in is established, so an equivalent from another supplier should not be approved without device-level and system-level equivalence testing.

Comparaison avec les alternatives

Paramètre Ce produit XC5VLX30-1FFG676I XC5VLX30-2FFG676C XC5VLX30-3FFG676C XC6VLX30-1FFG676C XC5VLX30-1FFG676ES
Package 676-ball FCBGA 676-ball FCBGA 676-ball FCBGA 676-ball FCBGA 676-ball FCBGA 676-ball FCBGA
Brand AMD AMD AMD AMD AMD AMD
FPGA Family Virtex-5 LX Virtex-5 LX Virtex-5 LX Virtex-5 LX Spartan-6 Virtex-5 LX
Speed Grade -1 -1 -2 -3 -1 -1

Principaux différenciateurs

  • Directly matches the original commercial-grade configuration (vs XC5VLX30-1FFG676I)
  • Provides a faster timing candidate without changing the package (vs XC5VLX30-2FFG676C)
  • Supports the broadest same-package speed upgrade (vs XC5VLX30-3FFG676C)
  • Offers a same-package migration path to a newer FPGA family (vs XC6VLX30-1FFG676C)

Notes de conception

Use the official AMD Virtex-5 package file to assign every one of the 676 balls before schematic capture is released. The FFG676 footprint requires dense escape routing, adequate power and ground connectivity, and a multilayer PCB designed for the selected I/O standards. Verify exposed-pad or thermal-via requirements, package dimensions, solder-mask clearance, and assembly-handling allowances against the controlled AMD package drawing.

Plan the 1 V core rail and auxiliary I/O rails as a complete power tree with correct sequencing, decoupling, and point-of-load regulation. Follow the AMD recommended schematic and PCB guidance for rail partitioning and capacitor placement. Estimated: at a 1 V core rail and 1 A total core current, core-rail dissipation is 1 W before accounting for I/O and auxiliary supplies; actual device power depends on the implemented logic and switching activity.

Assign high-speed interfaces only after checking the supported I/O standards, clock requirements, and board-level reach of every lane. Use the device speed grade for timing analysis, because replacing a -1 grade with -2 or -3 can alter timing margins and power behavior. Validate source-synchronous interfaces, differential pairs, external memory routing, and impedance-controlled nets with the complete system, not only the FPGA.

Model worst-case FPGA activity, ambient temperature, airflow, and board copper when selecting the PCB stackup and cooling strategy. Estimated: each watt of local dissipation in a 65 nm FPGA can materially raise junction temperature in a dense 676-ball package. Use the AMD power-dissipation methodology and package thermal data for final calculations, then reserve copper and vias around the device where the package construction permits.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The commercial C suffix is identified in the ordering information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer or lot documentation.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

XC5VLX30-1FFG676C XC5VLX30-1FFG676C datasheet XC5VLX30-1FFG676C pinout XC5VLX30-1FFG676C datasheet pdf XC5VLX30-1FFG676C equivalent XC5VLX30-1FFG676C replacement XC5VLX30-1FFG676C cross reference XC5VLX30-1FFG676C vs XC5VLX30-2FFG676C XC5VLX30-1FFG676C footprint XC5VLX30-1FFG676C FFG676 package AMD XC5VLX30-1FFG676C XC5VLX30-1FFG676C price XC5VLX30-1FFG676C stock XC5VLX30 30K logic cell FPGA

Composants & termes associés

AMD Xilinx XC5VLX30-1FFG676C XC5VLX30-1FFG676I XC5VLX30-2FFG676C XC5VLX30-3FFG676C XC6VLX30-1FFG676C XC5VLX30-1FFG676ES Virtex-5 LX Spartan-6 FPGA field-programmable gate array programmable logic ASIC CPLD logic cell fabric memory block RAM DSP slice FFG676 676-ball FCBGA FCBGA package 65 nm CMOS 1 V core supply I/O standard bitstream power sequencing signal integrity industrial communication test and measurement data acquisition video processing
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ